#
303975 |
|
11-Aug-2016 |
gjb |
Copy stable/11@r303970 to releng/11.0 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, and rename it to RC1.
Update __FreeBSD_version.
Use the quarterly branch for the default FreeBSD.conf pkg(8) repo and the dvd1.iso packages population.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
302408 |
|
08-Jul-2016 |
gjb |
Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle. Prune svn:mergeinfo from the new branch, as nothing has been merged here.
Additional commits post-branch will follow.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
255643 |
|
17-Sep-2013 |
nwhitehorn |
Merge in support for PAPR-compliant (Power Architecture Platform Requirements) systems from the projects/pseries branch. This in principle includes all IBM POWER hardware released in the last 15 years with the exception of POWER3-based systems when run in 64-bit mode. The main development target, however, has been the PAPR logical partition support that is the default target in KVM on POWER and QEMU -- mileage may vary on actual hardware at present. Much of the heavy lifting here was done by Andreas Tobler.
Approved by: re (kib)
|
#
238034 |
|
02-Jul-2012 |
marcel |
Remove device uart_z8530 and options GEOM_PART_APM from DEFAULTS and instead add them to GENERIC and GENERIC64. They are applicable to Apple H/W and not at all for Book-E platforms.
|
#
232619 |
|
06-Mar-2012 |
attilio |
Disable the option VFS_ALLOW_NONMPSAFE by default on all the supported platforms. This will make every attempt to mount a non-mpsafe filesystem to the kernel forbidden, unless it is expressely compiled with VFS_ALLOW_NONMPSAFE option.
This patch is part of the effort of killing non-MPSAFE filesystems from the tree.
No MFC is expected for this patch.
|
#
231908 |
|
19-Feb-2012 |
andreast |
Enable the new PCI-PCI bridge driver by default. Tested on 32- and 64-bit PowerMac.
|
#
227333 |
|
08-Nov-2011 |
attilio |
Introduce the option VFS_ALLOW_NONMPSAFE and turn it on by default on all the architectures. The option allows to mount non-MPSAFE filesystem. Without it, the kernel will refuse to mount a non-MPSAFE filesytem.
This patch is part of the effort of killing non-MPSAFE filesystems from the tree.
No MFC is expected for this patch.
Tested by: gianni Reviewed by: kib
|
#
209975 |
|
13-Jul-2010 |
nwhitehorn |
MFppc64:
Kernel sources for 64-bit PowerPC, along with build-system changes to keep 32-bit kernels compiling (build system changes for 64-bit kernels are coming later). Existing 32-bit PowerPC kernel configurations must be updated after this change to specify their architecture.
|
#
201534 |
|
04-Jan-2010 |
imp |
Revert 200594. This file isn't intended for these sorts of things.
|
#
200594 |
|
16-Dec-2009 |
dougb |
Add INCLUDE_CONFIG_FILE, and a note in comments about how to also include the comments with CONFIGARGS
|
#
178372 |
|
21-Apr-2008 |
phk |
Make genclock standard on all platforms.
Thanks to: grehan & marcel for platform support on ia64 and ppc.
|
#
178367 |
|
21-Apr-2008 |
marcel |
Switch to using genclock. Have nexus double as clock device for now. While here, add a proper attach() method to nexus.
Requested by: phk
|
#
177091 |
|
12-Mar-2008 |
jeff |
Remove kernel support for M:N threading.
While the KSE project was quite successful in bringing threading to FreeBSD, the M:N approach taken by the kse library was never developed to its full potential. Backwards compatibility will be provided via libmap.conf for dynamically linked binaries and static binaries will be broken.
|
#
170652 |
|
13-Jun-2007 |
marcel |
Enable GEOM_PART_MBR by default. On ia64 this replaces GEOM_MBR.
|
#
166551 |
|
07-Feb-2007 |
marcel |
Evolve the ctlreq interface added to geom_gpt into a generic partitioning class that supports multiple schemes. Current schemes supported are APM (Apple Partition Map) and GPT. Change all GEOM_APPLE anf GEOM_GPT options into GEOM_PART_APM and GEOM_PART_GPT (resp).
The ctlreq interface supports verbs to create and destroy partitioning schemes on a disk; to add, delete and modify partitions; and to commit or undo changes made.
|
#
163987 |
|
04-Nov-2006 |
jb |
Remove the KDTRACE option again because of the complaints about having it as a default.
For the record, the KDTRACE option caused _no_ additional source files to be compiled in; certainly no CDDL source files. All it did was to allow existing BSD licensed kernel files to include one or more CDDL header files.
By removing this from DEFAULTS, the onus is on a kernel builder to add the option to the kernel config, possibly by including GENERIC and customising from there. It means that DTrace won't be a feature available in FreeBSD by default, which is the way I intended it to be.
Without this option, you can't load the dtrace module (which contains the dtrace device and the DTrace framework). This is equivalent to requiring an option in a kernel config before you can load the linux emulation module, for example.
I think it is a mistake to have DTrace ported to FreeBSD, but not to have it available to everyone, all the time. The only exception to this is the companies which distribute systems with FreeBSD embedded. Those companies will customise their systems anyway. The KDTRACE option was intended for them, and only them.
|
#
163972 |
|
04-Nov-2006 |
jb |
Build in kernel support for loading DTrace modules by default. This adds the hooks that DTrace modules register with, and adds a few functions which have the dtrace_ prefix to allow the DTrace FBT (function boundary trace) provider to avoid tracing because they are called from the DTtrace probe context.
Unlike other forms of tracing and debug, DTrace support in the kernel incurs negligible run-time cost.
I think the only reason why anyone wouldn't want to have kernel support enabled for DTrace would be due to the license (CDDL) under which DTrace is released.
|
#
163710 |
|
26-Oct-2006 |
jb |
Add 'options KSE' to the kernel config DEFAULTS on all arches/machines except sun4v.
This change makes the transition from a default to an option more transparent and is an attempt to head off all the compliants that are likely from people who don't read UPDATING, based on experience with the io/mem change.
Submitted by: scottl@
|
#
159547 |
|
12-Jun-2006 |
marcel |
Some machines have an ESCC. Make sure we build uart(4) with support for the z8530.
|
#
159537 |
|
12-Jun-2006 |
imp |
Add the ability to subset the devices that UART pulls in. This allows the arm to compile without all the extras that don't appear, at least not in the flavors of ARM I deal with. This helps us save about 100k.
If I've botched the available devices on a platform, please let me know and I'll correct ASAP.
|
#
152865 |
|
27-Nov-2005 |
ru |
- Allow duplicate "machine" directives with the same arguments. - Move existing "machine" directives to DEFAULTS.
|
#
152661 |
|
21-Nov-2005 |
jhb |
Create DEFAULTS files for alpha, ia64, powerpc, and sparc64 and move 'device mem' over from GENERIC to DEFAULTS to be consistent with i386 and amd64. Additionally, on ia64 enable ACPI by default since ia64 requires acpi.
|