#
303975 |
|
11-Aug-2016 |
gjb |
Copy stable/11@r303970 to releng/11.0 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, and rename it to RC1.
Update __FreeBSD_version.
Use the quarterly branch for the default FreeBSD.conf pkg(8) repo and the dvd1.iso packages population.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
302915 |
|
15-Jul-2016 |
ian |
MFC r302502, r302505:
Consolidate debugging options from all arm kernel configs to std.arm[v6].
Correct syntax errors that only show up when compiled with INVARIANTS.
Approved by: re (gjb)
|
#
302408 |
|
08-Jul-2016 |
gjb |
Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle. Prune svn:mergeinfo from the new branch, as nothing has been merged here.
Additional commits post-branch will follow.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
294413 |
|
20-Jan-2016 |
zbb |
Mark gpio as "optional" in files.mv and edit Marvell's kernconfs
Including arm/mv/gpio.c now depends on 'gpio' device. 'device gpio' was added to all kernconf files of Marvell boards, except ARMADAXP (dummy mv_gpio_res definition was removed) and ARMADA38X (not supported yet).
This commit allows to use generic files.mv on A38X.
Reviewed by: andrew Obtained from: Semihalf Sponsored by: Stormshield Submitted by: Bartosz Szczepanek <bsz@semihalf.com> Differential revision: https://reviews.freebsd.org/D4372
|
#
289945 |
|
25-Oct-2015 |
zbb |
Add etherswitch support to mge
This commit introduces support for etherswitch devices that utilize SMI as a way of accessing its registers. SMI register is located in address space of mge -- access to it was exported through MDIO interface.
Attachment functions were enhanced so as to ensure proper initialisation in both cases: 1) PHYs attached directly to mge, 2) PHYs attached to switch device and switch attached to mge. Attachment of etherswitch device depends on dts entry with compatible="mrvl,sw" property. If none is found, typical PHY attachment procedure follows.
In case of switch attached, PHYs' status and configuration is accessible via etherswitchcfg, and ifconfig shows always-up, non-configurable mge interfaces.
Due to the fact that there may be simultaneous accessess to SMI registers (e.g. from PHY attached to one of mge instances and switch to the other), SMI access interlock was added. It is SX lock, because sleep ability is necessary -- busy-waiting would result in poor performance due to long delays required by hardware. Underlying switch driver is obliged to use sleepable locks as well.
Reviewed by: adrian Obtained from: Semihalf Submitted by: Bartosz Szczepanek <bsz@semihalf.com> Differential revision: https://reviews.freebsd.org/D3900
|
#
282576 |
|
07-May-2015 |
andrew |
Clean up the ARM kernel configs to use 'include<space><tab>"file"'.
|
#
282499 |
|
05-May-2015 |
ian |
Create std.arm and std.armv6 config files and include the right one from each of the existing kernel configs. This gives a place to put config that applies to the entire arch.
Add the ARM_NEW_PMAP option to std.armv6. This is working well in early testing and it's time for wide exposure, but it's still nice to be able to fall back to the old implementation for testing when a problem comes along. Eventually the option and the old implementation will go away.
The opportunity now exists to move a whole lot of boilerplate from all the arm kernel config files into std.arm*, but that's a commit for another day.
|
#
279837 |
|
10-Mar-2015 |
ian |
Remove MODULES_OVERRIDE="" and WITHOUT_MODULES="ahc" from armv6 configs.
These are left over from long ago when there was no way to load modules on early armv6 platforms, and when there was a build problem with ahc that has long since been fixed, and they just keep getting copy-pasted into new configs.
|
#
276755 |
|
06-Jan-2015 |
jhb |
Remove "New" label from NFSCL/NFSD now that they are the only NFS client/server. While here, remove duplicate NFSCL from sys/conf/NOTES.
Approved by: rmacklem
|
#
263301 |
|
18-Mar-2014 |
imp |
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
|
#
263245 |
|
16-Mar-2014 |
imp |
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
|
#
262905 |
|
07-Mar-2014 |
ian |
Strip arm/conf/DEFAULTS down to just items that are mandatory for running the architecture. Move the other contents into each of the individual config files.
Requested by: imp
|
#
261570 |
|
07-Feb-2014 |
ian |
Revert r260440. I didn't realize that most of this change was already in effect due to r250753. That is sufficient for all SoCs with a 32 byte cache line size. Systems with 64 byte cache lines will need the option; that will be done in a separate commit.
Thanks to loos@ for pointing out r250753.
|
#
260440 |
|
08-Jan-2014 |
ian |
Add option USB_HOST_ALIGN to configs that contain 'device usb'. Setting this to the cache line size is required to avoid data corruption on armv4 and armv5, and improves performance on armv6, in both cases by avoiding partial cacheline flushes for USB IO.
All these configs already exist in 10-stable. A few that don't (and thus can't be MFC'd yet) will be committed separately.
|
#
253845 |
|
31-Jul-2013 |
obrien |
Back out r253779 & r253786.
|
#
253779 |
|
29-Jul-2013 |
obrien |
Decouple yarrow from random(4) device.
* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option. The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.
* random(4) device doesn't really depend on rijndael-*. Yarrow, however, does.
* Add random_adaptors.[ch] which is basically a store of random_adaptor's. random_adaptor is basically an adapter that plugs in to random(4). random_adaptor can only be plugged in to random(4) very early in bootup. Unplugging random_adaptor from random(4) is not supported, and is probably a bad idea anyway, due to potential loss of entropy pools. We currently have 3 random_adaptors: + yarrow + rdrand (ivy.c) + nehemeiah
* Remove platform dependent logic from probe.c, and move it into corresponding registration routines of each random_adaptor provider. probe.c doesn't do anything other than picking a specific random_adaptor from a list of registered ones.
* If the kernel doesn't have any random_adaptor adapters present then the creation of /dev/random is postponed until next random_adaptor is kldload'ed.
* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a system wide one.
Submitted by: arthurmesh@gmail.com, obrien Obtained from: Juniper Networks Reviewed by: obrien
|
#
249083 |
|
04-Apr-2013 |
mav |
Remove all legacy ATA code parts, not used since options ATA_CAM enabled in most kernels before FreeBSD 9.0. Remove such modules and respective kernel options: atadisk, ataraid, atapicd, atapifd, atapist, atapicam. Remove the atacontrol utility and some man pages. Remove useless now options ATA_CAM.
No objections: current@, stable@ MFC after: never
|
#
240572 |
|
16-Sep-2012 |
jmg |
fix the kernel files to match our standard "option<space><tab>" format such that when commenting/uncommentting lines, horizontal spacing is maintained...
Also fix some minor comment formatting to line things up, etc...
Reviewed by: gnn, imp MFC after: 1 week
|
#
233271 |
|
21-Mar-2012 |
ed |
Remove pty(4) from our kernel configurations.
As of FreeBSD 8, this driver should not be used. Applications that use posix_openpt(2) and openpty(3) use the pts(4) that is built into the kernel unconditionally. If it turns out high profile depend on the pty(4) module anyway, I'd rather get those fixed. So please report any issues to me.
The pty(4) module is still available as a kernel module of course, so a simple `kldload pty' can be used to run old-style pseudo-terminals.
|
#
224699 |
|
07-Aug-2011 |
rmacklem |
Change all the sample kernel configurations to use NFSCL, NFSD instead of NFSCLIENT, NFSSERVER since NFSCL and NFSD are now the defaults. The client change is needed for diskless configurations, so that the root mount works for fstype nfs. Reported by seanbru at yahoo-inc.com for i386/XEN.
Approved by: re (hrs)
|
#
220982 |
|
24-Apr-2011 |
mav |
Switch the GENERIC kernels for all architectures to the new CAM-based ATA stack. It means that all legacy ATA drivers are disabled and replaced by respective CAM drivers. If you are using ATA device names in /etc/fstab or other places, make sure to update them respectively (adX -> adaY, acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential numbers for each type in order of detection, unless configured otherwise with tunables, see cam(4)).
ataraid(4) functionality is now supported by the RAID GEOM class. To use it you can load geom_raid kernel module and use graid(8) tool for management. Instead of /dev/arX device names, use /dev/raid/rX.
|
#
220774 |
|
18-Apr-2011 |
philip |
Delete mistakenly added sys/files.ts7800 Add mistakenly forgotten sys/arm/conf/TS7800
Not sure how this happened. Apologies for the repo-churn.
Submitted by: glebius Pointy hat to: philip
|