#
303975 |
|
11-Aug-2016 |
gjb |
Copy stable/11@r303970 to releng/11.0 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, and rename it to RC1.
Update __FreeBSD_version.
Use the quarterly branch for the default FreeBSD.conf pkg(8) repo and the dvd1.iso packages population.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
302915 |
|
15-Jul-2016 |
ian |
MFC r302502, r302505:
Consolidate debugging options from all arm kernel configs to std.arm[v6].
Correct syntax errors that only show up when compiled with INVARIANTS.
Approved by: re (gjb)
|
#
302408 |
|
08-Jul-2016 |
gjb |
Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle. Prune svn:mergeinfo from the new branch, as nothing has been merged here.
Additional commits post-branch will follow.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
295621 |
|
14-Feb-2016 |
andrew |
Create the twsi device option in preparation to move the driver to a common location. The device is also found in Allwinner SoCs.
Sponsored by: ABT Systems Ltd
|
#
294413 |
|
20-Jan-2016 |
zbb |
Mark gpio as "optional" in files.mv and edit Marvell's kernconfs
Including arm/mv/gpio.c now depends on 'gpio' device. 'device gpio' was added to all kernconf files of Marvell boards, except ARMADAXP (dummy mv_gpio_res definition was removed) and ARMADA38X (not supported yet).
This commit allows to use generic files.mv on A38X.
Reviewed by: andrew Obtained from: Semihalf Sponsored by: Stormshield Submitted by: Bartosz Szczepanek <bsz@semihalf.com> Differential revision: https://reviews.freebsd.org/D4372
|
#
289945 |
|
25-Oct-2015 |
zbb |
Add etherswitch support to mge
This commit introduces support for etherswitch devices that utilize SMI as a way of accessing its registers. SMI register is located in address space of mge -- access to it was exported through MDIO interface.
Attachment functions were enhanced so as to ensure proper initialisation in both cases: 1) PHYs attached directly to mge, 2) PHYs attached to switch device and switch attached to mge. Attachment of etherswitch device depends on dts entry with compatible="mrvl,sw" property. If none is found, typical PHY attachment procedure follows.
In case of switch attached, PHYs' status and configuration is accessible via etherswitchcfg, and ifconfig shows always-up, non-configurable mge interfaces.
Due to the fact that there may be simultaneous accessess to SMI registers (e.g. from PHY attached to one of mge instances and switch to the other), SMI access interlock was added. It is SX lock, because sleep ability is necessary -- busy-waiting would result in poor performance due to long delays required by hardware. Underlying switch driver is obliged to use sleepable locks as well.
Reviewed by: adrian Obtained from: Semihalf Submitted by: Bartosz Szczepanek <bsz@semihalf.com> Differential revision: https://reviews.freebsd.org/D3900
|
#
283547 |
|
25-May-2015 |
ian |
Ensure that all arm kernel configs contain ALT_BREAK_TO_DEBUGGER and not BREAK_TO_DEBUGGER if they have a serial console (most do). A burst of serial line noise (such as unplugging a usb serial adapter) can look like a break and drop a working system into the debugger. The alt break sequence (<CR>~^B) works fine on both serial and non-serial consoles.
|
#
282714 |
|
10-May-2015 |
andrew |
First pass clenup over the Marvell db-88f6xxx kernel configs.
|
#
282576 |
|
07-May-2015 |
andrew |
Clean up the ARM kernel configs to use 'include<space><tab>"file"'.
|
#
282499 |
|
05-May-2015 |
ian |
Create std.arm and std.armv6 config files and include the right one from each of the existing kernel configs. This gives a place to put config that applies to the entire arch.
Add the ARM_NEW_PMAP option to std.armv6. This is working well in early testing and it's time for wide exposure, but it's still nice to be able to fall back to the old implementation for testing when a problem comes along. Eventually the option and the old implementation will go away.
The opportunity now exists to move a whole lot of boilerplate from all the arm kernel config files into std.arm*, but that's a commit for another day.
|
#
279850 |
|
10-Mar-2015 |
ian |
Remove MODULES_OVERRIDE="" for Marvel-based armv5 systems.
Also add some #NO_UNIVERSE to configs that essentially duplicate DB-88F6XXX.
|
#
276096 |
|
23-Dec-2014 |
rmacklem |
Remove the old NFS client and server from head, which means that the NFSCLIENT and NFSSERVER kernel options will no longer work. This commit only removes the kernel components. Removal of unused code in the user utilities will be done later. This commit does not include an addition to UPDATING, but that will be committed in a few minutes.
Discussed on: freebsd-fs
|
#
276004 |
|
21-Dec-2014 |
andrew |
Fix the indentation to simplify comparing the ARM config files.
|
#
274331 |
|
09-Nov-2014 |
melifaro |
Renove faith(4) and faithd(8) from base. It looks like industry have chosen different (and more traditional) stateless/statuful NAT64 as translation mechanism. Last non-trivial commits to both faith(4) and faithd(8) happened more than 12 years ago, so I assume it is time to drop RFC3142 in FreeBSD.
No objections from: net@
|
#
271050 |
|
03-Sep-2014 |
ian |
Remove DIAGNOSTIC from the kernel config of low-end arm systems. Sanity checks such as vmem_check() can make a low-end system go completely unresponsive for as much as 3 seconds out of every 10.
|
#
263301 |
|
18-Mar-2014 |
imp |
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
|
#
263245 |
|
16-Mar-2014 |
imp |
Make all the comments '# ' and align to same column. This fixes the rampently incosnsitent usage which made cut and paste from one file to another look ugly.
|
#
262905 |
|
07-Mar-2014 |
ian |
Strip arm/conf/DEFAULTS down to just items that are mandatory for running the architecture. Move the other contents into each of the individual config files.
Requested by: imp
|
#
262877 |
|
07-Mar-2014 |
ian |
Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs that have it individually. Concensus on freebsd-arm@ is that it should be included in all ARM kernels.
|
#
260333 |
|
05-Jan-2014 |
ian |
Enable the cesa security/crypto device by providing the required property in the dts source, and adding the right devices to the kernel config. Also generally bring the kernel config into line with what we have for other Marvell/Kirkwood systems (add lots of useful devices and options).
One particularly notable addition amongst the kernel config changes is USB_HOST_ALIGN=32, which may help eliminate data corruption on USB drives.
PR: kern/181975 arm/162159
|
#
253845 |
|
31-Jul-2013 |
obrien |
Back out r253779 & r253786.
|
#
253779 |
|
29-Jul-2013 |
obrien |
Decouple yarrow from random(4) device.
* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option. The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.
* random(4) device doesn't really depend on rijndael-*. Yarrow, however, does.
* Add random_adaptors.[ch] which is basically a store of random_adaptor's. random_adaptor is basically an adapter that plugs in to random(4). random_adaptor can only be plugged in to random(4) very early in bootup. Unplugging random_adaptor from random(4) is not supported, and is probably a bad idea anyway, due to potential loss of entropy pools. We currently have 3 random_adaptors: + yarrow + rdrand (ivy.c) + nehemeiah
* Remove platform dependent logic from probe.c, and move it into corresponding registration routines of each random_adaptor provider. probe.c doesn't do anything other than picking a specific random_adaptor from a list of registered ones.
* If the kernel doesn't have any random_adaptor adapters present then the creation of /dev/random is postponed until next random_adaptor is kldload'ed.
* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a system wide one.
Submitted by: arthurmesh@gmail.com, obrien Obtained from: Juniper Networks Reviewed by: obrien
|
#
245999 |
|
27-Jan-2013 |
ian |
Remove the remaining references to the now-obsolete sheevaplug config files, which have been replaced by the generic db88f6xxx config which works for all kirkwood-series chips.
Approved by: cognet (mentor)
|
#
240572 |
|
16-Sep-2012 |
jmg |
fix the kernel files to match our standard "option<space><tab>" format such that when commenting/uncommentting lines, horizontal spacing is maintained...
Also fix some minor comment formatting to line things up, etc...
Reviewed by: gnn, imp MFC after: 1 week
|
#
233271 |
|
21-Mar-2012 |
ed |
Remove pty(4) from our kernel configurations.
As of FreeBSD 8, this driver should not be used. Applications that use posix_openpt(2) and openpty(3) use the pts(4) that is built into the kernel unconditionally. If it turns out high profile depend on the pty(4) module anyway, I'd rather get those fixed. So please report any issues to me.
The pty(4) module is still available as a kernel module of course, so a simple `kldload pty' can be used to run old-style pseudo-terminals.
|
#
224699 |
|
07-Aug-2011 |
rmacklem |
Change all the sample kernel configurations to use NFSCL, NFSD instead of NFSCLIENT, NFSSERVER since NFSCL and NFSD are now the defaults. The client change is needed for diskless configurations, so that the root mount works for fstype nfs. Reported by seanbru at yahoo-inc.com for i386/XEN.
Approved by: re (hrs)
|
#
212332 |
|
08-Sep-2010 |
emax |
Add custom kernel configuration and device tree source files for Seagate FreeAgent DockStar(tm) device. It seems to be a dumb down version of Marvell SheevaPlug. Device tree source file could use more tweaking, but at least it wll network boot and run FreeBSD/arm.
|