#
303975 |
|
11-Aug-2016 |
gjb |
Copy stable/11@r303970 to releng/11.0 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, and rename it to RC1.
Update __FreeBSD_version.
Use the quarterly branch for the default FreeBSD.conf pkg(8) repo and the dvd1.iso packages population.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
302408 |
|
08-Jul-2016 |
gjb |
Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle. Prune svn:mergeinfo from the new branch, as nothing has been merged here.
Additional commits post-branch will follow.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
298107 |
|
16-Apr-2016 |
gjb |
Merge the projects/release-pkg branch to head.
This allows packaging the base system with pkg(8), including but not limited to providing the ability to provide upstream binary update possibilities for non-tier-1 architectures.
This merge is a requirement of the 11.0-RELEASE, and as such, thank you to everyone that has tested the project branch.
Documentation in build(7) etc. is still somewhat sparse, but updates to those parts will follow.
Sponsored by: The FreeBSD Foundation
|
#
292684 |
|
24-Dec-2015 |
bapt |
Reduce overlinking
ifconfig does not need libbsdxml and libsbuf only lib80211 needs it
|
#
291470 |
|
30-Nov-2015 |
adrian |
Convert ifconfig to use lib80211.
* remove regdomain.[ch] - it's now part of lib80211. * convert ifieee80211.c to use the ioctl routines in lib80211 and implement the "error? exit" wrapper behaviour the callers expect.
|
#
276668 |
|
04-Jan-2015 |
ngie |
Integrate sbin/ifconfig/tests from NetBSD into atf/kyua
Sponsored by: EMC / Isilon Storage Division
|
#
275851 |
|
17-Dec-2014 |
bryanv |
Prefix all the vxlan ifconfig commands so they are unique
And rehook ifvxlan back into the build.
|
#
275361 |
|
01-Dec-2014 |
des |
Disable the vxlan code until the people reponsible for it can come up with new command names that don't conflict with existing commands.
Pointy hat to: bryanv
|
#
275030 |
|
25-Nov-2014 |
bapt |
Convert sbin/ to LIBADD Reduce overlinking
|
#
273331 |
|
20-Oct-2014 |
bryanv |
Add vxlan interface
vxlan creates a virtual LAN by encapsulating the inner Ethernet frame in a UDP packet. This implementation is based on RFC7348.
Currently, the IPv6 support is not fully compliant with the specification: we should be able to receive UPDv6 packets with a zero checksum, but we need to support RFC6935 first. Patches for this should come soon.
Encapsulation protocols such as vxlan emphasize the need for the FreeBSD network stack to support batching, GRO, and GSO. Each frame has to make two trips through the network stack, and each frame will be at most MTU sized. Performance suffers accordingly.
Some latest generation NICs have begun to support vxlan HW offloads that we should also take advantage of. VIMAGE support should also be added soon.
Differential Revision: https://reviews.freebsd.org/D384 Reviewed by: gnn Relnotes: yes
|
#
270115 |
|
17-Aug-2014 |
melifaro |
Add forgotten DPADD to ifconfig(8).
PR: 192760 Submitted by: yaneurabeya at gmail.com MFC after: 2 weeks
|
#
270064 |
|
16-Aug-2014 |
melifaro |
Add support for reading i2c SFP/SFP+ data from NIC driver and presenting most interesting fields via ifconfig -v. This version supports Intel ixgbe driver only.
Tested on: Cisco,Intel,Mellanox,ModuleTech,Molex transceivers MFC after: 2 weeks
|
#
265420 |
|
06-May-2014 |
imp |
Use src.opts.mk in preference to bsd.own.mk except where we need stuff from the latter.
|
#
265385 |
|
05-May-2014 |
asomers |
Remove the ifconfig test added in rev 263445. After discussion with melifaro, we agreed that ifconfig's behavior was not a bug. The main motivation for bin/187551 was to partially resolve kern/187549, but we resolved kern/187549 in a different way instead.
ObsoleteFiles.inc etc/mtree/BSD.tests.dist sbin/ifconfig/tests/fibs_test.sh sbin/ifconfig/tests/Makefile sbin/ifconfig/Makefile Remove /usr/tests/sbin/ifconfig
PR: bin/187551 MFC after: 3 days Sponsored by: Spectra Logic
|
#
263445 |
|
20-Mar-2014 |
asomers |
Add several ATF tests that deal with multiple fibs. They're described in several different PRs, but the tests share some common code, so I'm committing them together.
sbin/ifconfig/tests sbin/ifconfig/tests/fibs_test.sh sbin/ifconfig/tests/Makefile sbin/ifconfig/Makefile Add fibs_test.sh, which regresses bin/187551
tests/sys/netinet tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile tests/sys/Makefile Add fibs_test.sh, which regresses kern/167947, kern/187552 kern/187549, kern/187550, and kern/187553
etc/mtree/BSD.tests.dist Add newly created directories
PR: bin/187551 PR: kern/167947 PR: kern/187552 PR: kern/187549 PR: kern/187550 PR: kern/187553 Discussed with: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic Corporation
|
#
263152 |
|
14-Mar-2014 |
glebius |
Remove AppleTalk support.
AppleTalk was a network transport protocol for Apple Macintosh devices in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was a legacy protocol and primary networking protocol is TCP/IP. The last Mac OS X release to support AppleTalk happened in 2009. The same year routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
|
#
263140 |
|
14-Mar-2014 |
glebius |
Remove IPX support.
IPX was a network transport protocol in Novell's NetWare network operating system from late 80s and then 90s. The NetWare itself switched to TCP/IP as default transport in 1998. Later, in this century the Novell Open Enterprise Server became successor of Novell NetWare. The last release that claimed to still support IPX was OES 2 in 2007. Routing equipment vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
|
#
257349 |
|
29-Oct-2013 |
glebius |
Make userland tools honor WITHOUT_PF build option.
Tested by: dt71@gmx.com
|
#
231642 |
|
14-Feb-2012 |
rmh |
Disable jail support in ifconfig when either building a rescue image or MK_JAIL knob has been set to "no".
Reviewed by: bz Approved by: adrian (mentor)
|
#
228577 |
|
16-Dec-2011 |
glebius |
Rename ifcarp.c to carp.c
|
#
223735 |
|
03-Jul-2011 |
bz |
Add infrastructure to allow all frames/packets received on an interface to be assigned to a non-default FIB instance.
You may need to recompile world or ports due to the change of struct ifnet.
Submitted by: cjsp Submitted by: Alexander V. Chernikov (melifaro ipfw.ru) (original versions) Reviewed by: julian Reviewed by: Alexander V. Chernikov (melifaro ipfw.ru) MFC after: 2 weeks X-MFC: use spare in struct ifnet
|
#
222527 |
|
31-May-2011 |
bz |
Conditionally compile in the af_inet and af_inet6, af_nd6 modules. If compiled in for dual-stack use, test with feature_present(3) to see if we should register the IPv4/IPv6 address family related options.
In case there is no "inet" support we would love to go with the usage() and make the address family mandatory (as it is for anything but inet in theory). Unfortunately people are used to ifconfig IF up/down etc. as well, so use a fallback of "link". Adjust the man page to reflect these minor details.
Improve error handling printing a warning in addition to the usage telling that we do not know the given address family in two places.
Reviewed by: hrs, rwatson Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 2 weeks
|
#
204329 |
|
25-Feb-2010 |
ru |
Fixed dependencies (make checkdpadd).
|
#
202532 |
|
17-Jan-2010 |
ed |
Raise WARNS for various tools where possible.
Submitted by: Marius NĂ¼nnerich <marius@nuenneri.ch>
|
#
197138 |
|
12-Sep-2009 |
hrs |
Improve flexibility of receiving Router Advertisement and automatic link-local address configuration:
- Convert a sysctl net.inet6.ip6.accept_rtadv to one for the default value of a per-IF flag ND6_IFF_ACCEPT_RTADV, not a global knob. The default value of the sysctl is 0.
- Add a new per-IF flag ND6_IFF_AUTO_LINKLOCAL and convert a sysctl net.inet6.ip6.auto_linklocal to one for its default value. The default value of the sysctl is 1.
- Make ND6_IFF_IFDISABLED more robust. It can be used to disable IPv6 functionality of an interface now.
- Receiving RA is allowed if ip6_forwarding==0 *and* ND6_IFF_ACCEPT_RTADV is set on that interface. The former condition will be revisited later to support a "host + router" box like IPv6 CPE router. The current behavior is compatible with the older releases of FreeBSD.
- The ifconfig(8) now supports these ND6 flags as well as "nud", "prefer_source", and "disabled" in ndp(8). The ndp(8) now supports "auto_linklocal".
Discussed with: bz and jinmei Reviewed by: bz MFC after: 3 days
|
#
194871 |
|
24-Jun-2009 |
jamie |
Add the "vnet" and "-vnet" options, to allow moving interfaces between jails with VIMAGE.
Approved by: bz (mentor)
|
#
193664 |
|
07-Jun-2009 |
hrs |
Fix and add a workaround on an issue of EtherIP packet with reversed version field sent via gif(4)+if_bridge(4). The EtherIP implementation found on FreeBSD 6.1, 6.2, 6.3, 7.0, 7.1, and 7.2 had an interoperability issue because it sent the incorrect EtherIP packets and discarded the correct ones.
This change introduces the following two flags to gif(4):
accept_rev_ethip_ver: accepts both correct EtherIP packets and ones with reversed version field, if enabled. If disabled, the gif accepts the correct packets only. This flag is enabled by default.
send_rev_ethip_ver: sends EtherIP packets with reversed version field intentionally, if enabled. If disabled, the gif sends the correct packets only. This flag is disabled by default.
These flags are stored in struct gif_softc and can be set by ifconfig(8) on per-interface basis.
Note that this is an incompatible change of EtherIP with the older FreeBSD releases. If you need to interoperate older FreeBSD boxes and new versions after this commit, setting "send_rev_ethip_ver" is needed.
Reviewed by: thompsa and rwatson Spotted by: Shunsuke SHINOMIYA PR: kern/125003 MFC after: 2 weeks
|
#
181224 |
|
03-Aug-2008 |
thompsa |
Move the grekey to its own file, ifconfig.c does not have interface specific code.
Submitted by: sam
|
#
178354 |
|
20-Apr-2008 |
sam |
Multi-bss (aka vap) support for 802.11 devices.
Note this includes changes to all drivers and moves some device firmware loading to use firmware(9) and a separate module (e.g. ral). Also there no longer are separate wlan_scan* modules; this functionality is now bundled into the wlan module.
Supported by: Hobnob and Marvell Reviewed by: many Obtained from: Atheros (some bits)
|
#
168793 |
|
17-Apr-2007 |
thompsa |
Rename the trunk(4) driver to lagg(4) as it is too similar to vlan trunking.
The name trunk is misused as the networking term trunk means carrying multiple VLANs over a single connection. The IEEE standard for link aggregation (802.3 section 3) does not talk about 'trunk' at all while it is used throughout IEEE 802.1Q in describing vlans.
The lagg(4) driver provides link aggregation, failover and fault tolerance.
Discussed on: current@
|
#
168563 |
|
10-Apr-2007 |
thompsa |
Hook trunk(4) up to the build.
|
#
159781 |
|
19-Jun-2006 |
mlaier |
Import interface groups from OpenBSD. This allows to group interfaces in order to - for example - apply firewall rules to a whole group of interfaces. This is required for importing pf from OpenBSD 3.9
Obtained from: OpenBSD (with changes) Discussed on: -net (back in April)
|
#
156905 |
|
20-Mar-2006 |
ru |
Extend coverage of the MK_IPX build option to the following:
- <netipx> headers [1] - IPX library (libipx) - IPX support in ifconfig(8) - IPXrouted(8) - new MK_NCP option
New MK_NCP build option controls:
- <netncp> and <fs/nwfs> headers - NCP library (libncp) - ncplist(1) and ncplogin(1) - mount_nwfs(8) - ncp and nwfs kernel modules
User knobs: WITHOUT_IPX, WITHOUT_IPX_SUPPORT, WITHOUT_NCP.
[1] <netsmb/netbios.h> unconditionally uses <netipx> headers so they are still installed. This needs to be dealt with.
|
#
146987 |
|
05-Jun-2005 |
thompsa |
Connect if_bridge to the build.
Approved by: mlaier (mentor)
|
#
144130 |
|
25-Mar-2005 |
brooks |
Remove bogus (but harmless) -I.. from CFLAGS. It makes no difference to .depends other then the commant line.
Also remove -g from CFLAGS. The user should add it to CFLAGS if they desire debug support.
Reviewed by: ru (in concept) MFC After: 7 days
|
#
142215 |
|
22-Feb-2005 |
glebius |
Add CARP (Common Address Redundancy Protocol), which allows multiple hosts to share an IP address, providing high availability and load balancing.
Original work on CARP done by Michael Shalayeff, with many additions by Marco Pfatschbacher and Ryan McBride.
FreeBSD port done solely by Max Laier.
Patch by: mlaier Obtained from: OpenBSD (mickey, mcbride)
|
#
138593 |
|
08-Dec-2004 |
sam |
Overhaul to cleanup some of the tangled logic that's grown over the years.
o break per-address family support out into separate files o modularize per-address family and functional operations using a registration mechanism; this permits configuration according to which files you include (but beware that order of the files is important to insure backwards compatibility) o many cleanups to eliminate incestuous behaviour, global variables, and poor coding practices (still much more to fix)
The original motivation of this work was to support dynamic addition of functionality based on the interface so we can eliminate the various little control programs and so that vendors can distribute ifconfig plugins that support their in-kernel code. That work is still to be completed.
o Update 802.11 support for all the new net80211 functionality; some of these operations (e.g. list *) may be better suited in a different program
|
#
126178 |
|
23-Feb-2004 |
johan |
style.Makefile(5): Use WARNS?= instead of WARNS=.
|
#
105760 |
|
23-Oct-2002 |
rwatson |
Teach ifconfig(8) how to print and set the MAC labels on network interfaces using the 'mac' argument. Without MAC support in the kernel, this does not change the behavior of ifconfig.
Approved by: re Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
|
#
90671 |
|
15-Feb-2002 |
luigi |
Do not disable IPv6 and vlan support when RELEASE_CRUNCH is defined. We do support already IPv6 in the RELENG_4 boot floppies, and vlan might be desirable as well.
|
#
87376 |
|
05-Dec-2001 |
mike |
Move the WARNS attribute down so that it also applies to the RELEASE_CRUNCH case.
|
#
87325 |
|
04-Dec-2001 |
obrien |
Default to WARNS=2. Binary builds that cannot handle this must explicitly set WARNS=0.
Reviewed by: mike
|
#
83112 |
|
05-Sep-2001 |
dd |
Use CFLAGS, not COPTS, in the Makefile. bsd.prog.mk conveniently adds COPTS towards the end of final CFLAGS so that it can be used to override Makefile and other defaults. Using it in Makefiles risks having options set using it clobbered when somebody uses it on the command line.
Approved by: bde
|
#
80057 |
|
21-Jul-2001 |
obrien |
Dike out the IPX bits if RELEASE_CRUNCH is defined.
|
#
77217 |
|
26-May-2001 |
phk |
Currently, each wireless networking driver has it's own control program despite the fact that most people want to set exactly the same settings regardless of which card they have. It has been repeatidly suggested that this configuration should be done via ifconfig. This patch implements the required functionality in ifconfig and add support to the wi and an drivers. It also provides partial, untested support for the awi driver.
PR: 25577 Submitted by: Brooks Davis <brooks@one-eyed-alien.net>
|
#
74815 |
|
26-Mar-2001 |
ru |
- Backout botched attempt to introduce MANSECT feature. - MAN[1-9] -> MAN.
|
#
74531 |
|
20-Mar-2001 |
ru |
Set the default manual section for sbin/ to 8.
|
#
69414 |
|
30-Nov-2000 |
luigi |
remove an undefined reference when no VLAN support is compiled in.
|
#
54624 |
|
15-Dec-1999 |
shin |
Enable INET6 by default. This should be OK on non INET6 enabled kernel.
|
#
54263 |
|
07-Dec-1999 |
shin |
udp IPv6 support, IPv6/IPv4 tunneling support in kernel, packet divert at kernel for IPv6/IPv4 translater daemon
This includes queue related patch submitted by jburkhol@home.com.
Submitted by: queue related patch from jburkhol@home.com Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
|
#
50476 |
|
28-Aug-1999 |
peter |
$Id$ -> $FreeBSD$
|
#
44764 |
|
15-Mar-1999 |
wpaul |
Grrr... botched remote commit. Let's try this again: vlan updates, take two.
|
#
25451 |
|
04-May-1997 |
peter |
Commit hooks for ifmedia support. It's optional in the Makefile, and can be trivially disabled.
|
#
22990 |
|
22-Feb-1997 |
peter |
Revert $FreeBSD$ to $Id$
|
#
21673 |
|
14-Jan-1997 |
jkh |
Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!) avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been insane otherwise.
|
#
19914 |
|
21-Nov-1996 |
wollman |
Fix lots of non-bug questionable code:
- Don't link against libkvm and don't uselessly include <kvm.h>. - Declare constant objects as const. - Declare functions with the correct types. - Call functions with the correct parameters.
Not fixed:
- The sysctl parsing remains ugly (but it may be the best we can do). - atnetrange() should use strtoul() rather than sscanf() for better error checking.
|
#
18965 |
|
16-Oct-1996 |
jkh |
Bring back NS support for this utility - we need it for the commercial Novell server software.
|
#
18050 |
|
05-Sep-1996 |
bde |
Fixed DPADD.
|
#
11840 |
|
27-Oct-1995 |
julian |
Submitted by: john hay
patches to merge the two IPX packages to work with each other and to not break make-world :)
IPXrouted should be working now, (or at least compiling) :)
|
#
5298 |
|
30-Dec-1994 |
jkh |
From: Wankle Rotary Engine <wpaul@skynet.ctr.columbia.edu>
- The -a flag now works just as it does in SunOS: '-a' is actually handled like a wildcard for all interfaces. 'ifconfig -a' displays the status of all interfaces, 'ifconfig -a netmask 0xffffff00' sets the netmask of all interfaces, and so forth. I don't know if many people really need to be able to set the netmasks of all interfaces at once, but the SunOS ifconfig seems to allow this, so there you have it.
- An 'ether_status' function has been added to display the ethernet address of all ethernet interfaces. Again, as in SunOS, you must be root in order for this to work. The ethernet address is read from /dev/kmem using kvm_open() and kvm_read(), much in the same was as it's done with netstat. If you choose to install ifconfig set-gid kmem then normal users will be able to see the ethernet address as well, though this may not be desireable. This feature requires a small change to the ifconfig Makefile: you need to link with -lkvm in order to use the kvm_*() functions.
Submitted by: wpaul
|
#
1855 |
|
05-Aug-1994 |
wollman |
Convert to our man installation style. Also fixed long-standing bug in `fastboot'/`fasthalt' in which the interpreter would hang around after `reboot' or `halt' is run, causing an irritating ``Killed'' message.
|
#
1559 |
|
26-May-1994 |
rgrimes |
This commit was generated by cvs2svn to compensate for changes in r1558, which included commits to RCS files with non-trunk default branches.
|
#
1558 |
|
26-May-1994 |
rgrimes |
BSD 4.4 Lite sbin Sources
Note: XNSrouted and routed NOT imported here, they shall be imported with usr.sbin.
|