Copy stable/11@r303970 to releng/11.0 as part of the 11.0-RELEASE
cycle.

Prune svn:mergeinfo from the new branch, and rename it to RC1.

Update __FreeBSD_version.

Use the quarterly branch for the default FreeBSD.conf pkg(8) repo and
the dvd1.iso packages population.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Convert kerberos to LIBADD and reduce overlinking of the kerberos binaries and
libraries

Revert r267233 for now. PIE support needs to be reworked.

1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.

We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.

Reported by: kib

In preparation for ASLR [1] support add WITH_PIE to support building with -fPIE.

This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.

Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]

Mark known build failures as NO_PIE for now.

The only known runtime failure was rtld.

[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]

NO_MAN= has been deprecated in favor of MAN= for some time, go ahead
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.

Add support for bmake. This includes:
1. Don't do upgrade_checks when using bmake. As long as we have WITH_BMAKE,
there's a bootstrap complication in ths respect. Avoid it. Make the
necessary changes to have upgrade_checks work wth bmake anyway.
2. Remove the use of -E. It's not needed in our build because we use ?= for
the respective variables, which means that we'll take the environment
value (if any) anyway.
3. Properly declare phony targets as phony as bmake is a lot smarter (and
thus agressive) about build avoidance.
4. Make sure CLEANFILES is complete and use it on .NOPATH. bmake is a lot
smarter about build avoidance and should not find files we generate in
the source tree. We should not have files in the repository we want to
generate, but this is an easier way to cross this hurdle.
5. Have behavior under bmake the same as it is under make with respect to
halting when sub-commands fail. Add "set -e" to compound commands so
that bmake is informed when sub-commands fail.
6. Make sure crunchgen uses the same make as the rest of the build. This
is important when the make utility isn't called make (but bmake for
example).
7. While here, add support for using MAKEOBJDIR to set the object tree
location. It's the second alternative bmake looks for when determining
the actual object directory (= .OBJDIR).

Submitted by: Simon Gerraty <sjg@juniper.net>
Submitted by: John Van Horne <jvanhorne@juniper.net>

* Remove headers from SRCS that are not generated
(and are in /usr/src/crypto/heimdal/).

* Avoid race conditions with 'make -j<N>'.

- Update FreeBSD Heimdal distribution to version 1.5.1. This also brings
several new kerberos related libraries and applications to FreeBSD:
o kgetcred(1) allows one to manually get a ticket for a particular service.
o kf(1) securily forwards ticket to another host through an authenticated
and encrypted stream.
o kcc(1) is an umbrella program around klist(1), kswitch(1), kgetcred(1)
and other user kerberos operations. klist and kswitch are just symlinks
to kcc(1) now.
o kswitch(1) allows you to easily switch between kerberos credentials if
you're running KCM.
o hxtool(1) is a certificate management tool to use with PKINIT.
o string2key(1) maps a password into key.
o kdigest(8) is a userland tool to access the KDC's digest interface.
o kimpersonate(8) creates a "fake" ticket for a service.

We also now install manpages for some lirbaries that were not installed
before, libheimntlm and libhx509.

- The new HEIMDAL version no longer supports Kerberos 4. All users are
recommended to switch to Kerberos 5.

- Weak ciphers are now disabled by default. To enable DES support (used
by telnet(8)), use "allow_weak_crypto" option in krb5.conf.

- libtelnet, pam_ksu and pam_krb5 are now compiled with error on warnings
disabled due to the function they use (krb5_get_err_text(3)) being
deprecated. I plan to work on this next.

- Heimdal's KDC now require sqlite to operate. We use the bundled version
and install it as libheimsqlite. If some other FreeBSD components will
require it in the future we can rename it to libbsdsqlite and use for these
components as well.

- This is not a latest Heimdal version, the new one was released while I was
working on the update. I will update it to 1.5.2 soon, as it fixes some
important bugs and security issues.

Fix conflicts after heimdal-1.1 import and add build infrastructure. Import
all non-style changes made by heimdal to our own libgssapi.

Fix generator glue to only expose extern struct units %s_units[] is
struct units defintition it known. The above construct is treated
as an incorrect C by GCC 4.2 otherwise.

Apply the .PHONY attribute to the ../make*/make* targets. This
causes them to be recreated (if needed) early, when doing "make
depend" here, before generating headers that depend on them.
This should fix breakages often seen while doing incremental
(NO_CLEAN) cross-builds.

Start the dreaded NOFOO -> NO_FOO conversion.

OK'ed by: core

style.Makefile(5).

OK'ed by: nectar

Try harder to pick up the correct print_version.c. The old version
works before bsd.dep.mk,v 1.44, whether .depend file exists or not,
but the contents of .depend file is wrong. With bsd.dep.mk,v 1.44,
the contents of .depend file is always broken, and build without a
.depend file is broken too. With this change it works reliably in
all cases. Ugh.

asn1_compile needs roken.h.

Overhaul of kerberos5/ makefiles. Most significant changes are:

- Dropped support for standalone builds, this was only partially
supported anyway, and required so much magic in makefiles that
made life dangerous (e.g., by using the custom yacc rules).

- Got rid of .OBJDIR in makefiles -- makes building of individual
files possible again.

- Made the .x.c transformations -j safe.

- Reprogrammed LDADD to fix static build of some utilities that
was broken.

- Fixed LDFLAGS and DPADD in the WITH_OPENLDAP case -- positively
affects the contents of .depend files.

- Removed redundant .h's from SRCS, only kept those that are
generated.

- libkrb5/ INCS were bogusly installed again with libgssapi/.

- Made build-tools real tools with their own makefiles in
separate directories. This allows us to properly track
their dependencies, etc.

- Faster build, 21% less of makefile code!

Approved by: nectar
Reviewed by: markm
Silence on: arch