MFC r360613:

Fix intermittent cleanup failures in the ggated test

MFC note: tests/sys/kern/coredump_phnum_test.sh changes omitted

MFC r322214:

Make test scripts under tests/... non-executable

Executable bits should be set at install time instead of in the repo.
Setting executable bits on files triggers false positives with Phabricator.

MFC r321702,r321703:

r321702:

Load geom_gate(4) if necessary before running tests; skip if it can't be loaded

The test code prior to r311893 loaded geom_gate at test start if necessary and
skipped the tests if it couldn't be loaded.

The ATF-ifcation of this test done in r311893 unfortunately dropped this
functionality.

This change restores the geom_gate module load and skips the test(s) if unavailable
in an ATF-like way.

PR: 220164

r321703:

Remove superfluous `exit 0` added in r321702

atf_skip triggers equivalent functionality, which means the `exit 0`
is unreachable code.

PR: 220164
MFC with: r321702

MFC r311893, r313008, r313081

r311893:
ATFify the geom gate tests.

This ensures their cleanup routines will be run even if they should timeout.

tests/sys/geom/class/gate/ggate_test.sh
tests/sys/geom/class/gate/Makefile
Add an ATF test with three testcases, one for each TAP test. Use
ATF-style cleanup functions, and convert sleeps to polling loops.

ObsoleteFiles.inc
tests/sys/geom/class/gate/conf.sh
tests/sys/geom/class/gate/1_test.sh
tests/sys/geom/class/gate/2_test.sh
tests/sys/geom/class/gate/3_test.sh
Delete TAP test files

Reviewed by: ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D8891

r313008:
Wait for /dev/ggate* to appear after calling `ggatel create` in :ggatel_{file,md}

The test assumed that `ggatel create` created a device on completion, but that's
incorrect. This squashes the race by waiting for the device to appear, as
`ggatel create` daemonizes before issuing an ioctl to geom_gate(4) if not called
with `-v`.

Discussed with: asomers
MFC after: 1 week
PR: 204616
Sponsored by: Dell EMC Isilon

r313081:
Replace for/retry loops with "wait_for_ggate_device" calls and check
results of commands

As noted in r313008, the underlying issue was that geom_gate device
creation wasn't created at ggatel command completion, but some short
time after. ggatec(8) employs similar logic when creating geom_gate(4)
devices.

Switch from retry loops (after the ggatec/dd write calls) to
wait_for_ggate_device function calls after calling ggatec(8) instead
to detect the presence of the /dev/ggate* device, as this function is
sufficient for determining whether or not the character device is ready
for testing

While here, use atf_check consistently with all dd calls to ensure that
data output is as expected.

MFC after: 1 week
Reviewed by: asomers
Differential Revision: D9409
Sponsored by: Dell EMC Isilon

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Merge ^/user/ngie/release-pkg-fix-tests to unbreak how test files are installed
after r298107

Summary of changes:

- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)

Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.

MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division

Merge the projects/release-pkg branch to head.

This allows packaging the base system with pkg(8), including
but not limited to providing the ability to provide upstream
binary update possibilities for non-tier-1 architectures.

This merge is a requirement of the 11.0-RELEASE, and as such,
thank you to everyone that has tested the project branch.

Documentation in build(7) etc. is still somewhat sparse, but
updates to those parts will follow.

Sponsored by: The FreeBSD Foundation

DIRDEPS_BUILD: Connect MK_TESTS.

Sponsored by: EMC / Isilon Storage Division

Similar to r295116, add an additional 1 second sleep after calling ggatel
before calling dd to defeat a race when writing out to the geom_gate(4)
device

MFC after: 1 month
Reported by: Jenkins
Sponsored by: EMC / Isilon Storage Division

Use the pidfile support added to ggated(8) in r294973 to ensure that the
ggated(8) daemon used by the tests is the instance specifically invoked by
the tests instead of one or more daemon instances running on the system

MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division

Add an additional 1 second sleep to after calling ggatec before calling
dd to defeat a race when writing out to the geom_gate(4) device

This will quell the Jenkins failure emails until I come up with a better
solution

MFC after: 1 month
Reported by: Jenkins
Sponsored by: EMC / Isilon Storage Division

PID file support hasn't been committed for ggated(8) yet. Unbreak running
the testcase more than once by restoring the "killall ggated"

MFC after: 15 days
Sponsored by: EMC / Isilon Storage Division

Remove unnecessary kldload logic added to geom_subr.sh in r293028

MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division

Integrate
tools/regression/geom_{concat,eli,gate,mirror,nop,raid3,shsec,stripe,uzip}
in to the FreeBSD test suite as
tests/sys/geom/class/{concat,eli,gate,mirror,nop,raid3,shsec,stripe,uzip}

The tools/regression/geom and tools/regression/geom_part testcases are being
left alone because both test sets are both currently broken.

The majority of this work was done on ^/user/ngie/more-tests2 . The differences
are as follows:
- tests/sys/geom/class/Makefile.inc is not present; it was
inlined into the class's Makefiles for explicitness.
- The testcases officially require root via kyua
- The geom_gate(4) tests don't use the pidfile changes proposed in
https://reviews.freebsd.org/D4836 .

MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division

Add conf.sh file missed in r293621

MFC after: 16 days
Sponsored by: EMC / Isilon Storage Division

Remove Makefile now that the testcases are all TAP based and
prove -rv can be used on them

MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division

- Delete non-TAP testcases
- Add a conf.sh file for executing common functions with geom_gate
- Use attach_md for attaching md(4) devices
- Don't hardcode /tmp for temporary files, which violates the kyua sandbox
- Add/increase sleeps to try and improve synchronization
- Add debug output for when checksums fail

test-1.t:
- Use pkill for killing ggated

MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division

Switch over to a different, more flexible test output protocol that's
understood by Perl's Test::Harness module and prove(1) commands.

Update README to describe the new protocol. The work's broken down into
two main sets of changes.

First, update the existing test programs (shell scripts and C programs)
to produce output in the ok/not ok format, and to, where possible, also
produce a header describing the number of tests that are expected to be
run.

Second, provide the .t files that actually run the tests. In some cases
these are copies of, or very similar too, scripts that already existed.
I've kept the old scripts around so that it's possible to verify that
behaviour under this new system (in terms of whether or not a test fails)
is identical to the behaviour under the old system.

Add a TODO file.

Add regression tests for GEOM Gate:
- test-1.sh - Tests ggatec(8) and ggated(8) on lo0.
- test-2.sh - Tests ggatel(8) on a regular file.
- test-3.sh - Tests ggatel(8) on a md(4) device.