MFC r336505, r336764
Have preload_delete_name() free pages backing preloaded data.

Revert r330897:

This was intended to be a non-functional change. It wasn't. The commit
message was thus wrong. In addition it broke arm, and merged crypto
related code.

Revert with prejudice.

This revert skips files touched in r316370 since that commit was since
MFCed. This revert also skips files that require $FreeBSD$ property
changes.

Thank you to those who helped me get out of this mess including but not
limited to gonzo, kevans, rgrimes.

Requested by: gjb (re)

Partial merge of the SPDX changes

These changes are incomplete but are making it difficult
to determine what other changes can/should be merged.

No objections from: pfg

MFC r324795:
Move swapout code into vm/vm_swapout.c.

MFC kern_mmap(9) and related helpers.

MFC r302514 (by rwatson):
Audit file-descriptor arguments to I/O system calls such as
read(2), write(2), dup(2), and mmap(2).

MFC r302524 (by rwatson):
When mmap(2) is used with a vnode, capture vnode attributes in the
audit trail.

MFC r313352 (by trasz):
Add kern_vm_mmap2(), kern_vm_mprotect(), kern_vm_msync(), kern_vm_munlock(),
kern_vm_munmap(), and kern_vm_madvise().

MFC r313655:
Change type of the prot parameter for kern_vm_mmap() from vm_prot_t to int.

MFC r313696:
Rework r313352.

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Various cleanups to the main function for AIO kernel processes:

- Pull the vmspace logic out into helper functions and reduce duplication.
Operations on the vmspace are all isolated to vm_map.c, but it now exports
a new 'vmspace_switch_aio' for use by AIO kernel processes.
- When an AIO kernel process wants to exit, break out of the main loop and
perform cleanup after the loop end. This reduces a lot of indentation and
allows cleanup to more closely mirror setup actions before the loop starts.
- Convert a DIAGNOSTIC to KASSERT().
- Replace mycp with more typical 'p'.

Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4990

Add a new file operations hook for mmap operations. File type-specific
logic is now placed in the mmap hook implementation rather than requiring
it to be placed in sys/vm/vm_mmap.c. This hook allows new file types to
support mmap() as well as potentially allowing mmap() for existing file
types that do not currently support any mapping.

The vm_mmap() function is now split up into two functions. A new
vm_mmap_object() function handles the "back half" of vm_mmap() and accepts
a referenced VM object to map rather than a (handle, handle_type) tuple.
vm_mmap() is now reduced to converting a (handle, handle_type) tuple to a
a VM object and then calling vm_mmap_object() to handle the actual mapping.
The vm_mmap() function remains for use by other parts of the kernel
(e.g. device drivers and exec) but now only supports mapping vnodes,
character devices, and anonymous memory.

The mmap() system call invokes vm_mmap_object() directly with a NULL object
for anonymous mappings. For mappings using a file descriptor, the
descriptors fo_mmap() hook is invoked instead. The fo_mmap() hook is
responsible for performing type-specific checks and adjustments to
arguments as well as possibly modifying mapping parameters such as flags
or the object offset. The fo_mmap() hook routines then call
vm_mmap_object() to handle the actual mapping.

The fo_mmap() hook is optional. If it is not set, then fo_mmap() will
fail with ENODEV. A fo_mmap() hook is implemented for regular files,
character devices, and shared memory objects (created via shm_open()).

While here, consistently use the VM_PROT_* constants for the vm_prot_t
type for the 'prot' variable passed to vm_mmap() and vm_mmap_object()
as well as the vm_mmap_vnode() and vm_mmap_cdev() helper routines.
Previously some places were using the mmap()-specific PROT_* constants
instead. While this happens to work because PROT_xx == VM_PROT_xx,
using VM_PROT_* is more correct.

Differential Revision: https://reviews.freebsd.org/D2658
Reviewed by: alc (glanced over), kib
MFC after: 1 month
Sponsored by: Chelsio

Handle wiring failures in vm_map_wire() with the new functions
pmap_unwire() and vm_object_unwire().

Retire vm_fault_{un,}wire(), since they are no longer used.

(See r268327 and r269134 for the motivation behind this change.)

Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division

When unwiring a region of an address space, do not assume that the
underlying physical pages are mapped by the pmap. If, for example, the
application has performed an mprotect(..., PROT_NONE) on any part of the
wired region, then those pages will no longer be mapped by the pmap.
So, using the pmap to lookup the wired pages in order to unwire them
doesn't always work, and when it doesn't work wired pages are leaked.

To avoid the leak, introduce and use a new function vm_object_unwire()
that locates the wired pages by traversing the object and its backing
objects.

At the same time, switch from using pmap_change_wiring() to the recently
introduced function pmap_unwire() for unwiring the region's mappings.
pmap_unwire() is faster, because it operates a range of virtual addresses
rather than a single virtual page at a time. Moreover, by operating on
a range, it is superpage friendly. It doesn't waste time performing
unnecessary demotions.

Reported by: markj
Reviewed by: kib
Tested by: pho, jmg (arm)
Sponsored by: EMC / Isilon Storage Division

Merge the following changes from projects/bhyve_npt_pmap:
- add fields to 'struct pmap' that are required to manage nested page tables.
- add a parameter to 'vmspace_alloc()' that can be used to override the
default pmap initialization routine 'pmap_pinit()'.

These changes are pushed ahead of the remaining changes in 'bhyve_npt_pmap'
in anticipation of the upcoming KBI freeze for 10.0.

Reviewed by: kib@, alc@
Approved by: re (glebius)

Replace kernel virtual address space allocation with vmem. This provides
transparent layering and better fragmentation.

- Normalize functions that allocate memory to use kmem_*
- Those that allocate address space are named kva_*
- Those that operate on maps are named kmap_*
- Implement recursive allocation handling for kmem_arena in vmem.

Reviewed by: alc
Tested by: pho
Sponsored by: EMC / Isilon Storage Division

Revert r253939:
We cannot busy a page before doing pagefaults.
Infact, it can deadlock against vnode lock, as it tries to vget().
Other functions, right now, have an opposite lock ordering, like
vm_object_sync(), which acquires the vnode lock first and then
sleeps on the busy mechanism.

Before this patch is reinserted we need to break this ordering.

Sponsored by: EMC / Isilon storage division
Reported by: kib

The page hold mechanism is fast but it has couple of fallouts:
- It does not let pages respect the LRU policy
- It bloats the active/inactive queues of few pages

Try to avoid it as much as possible with the long-term target to
completely remove it.
Use the soft-busy mechanism to protect page content accesses during
short-term operations (like uiomove_fromphys()).

After this change only vm_fault_quick_hold_pages() is still using the
hold mechanism for page content access.
There is an additional complexity there as the quick path cannot
immediately access the page object to busy the page and the slow path
cannot however busy more than one page a time (to avoid deadlocks).

Fixing such primitive can bring to complete removal of the page hold
mechanism.

Sponsored by: EMC / Isilon storage division
Discussed with: alc
Reviewed by: jeff
Tested by: pho

Make sys_mlock() function just a wrapper around vm_mlock() function
that does all the job.

Reviewed by: kib, jilles
Sponsored by: Nginx, Inc.

Eliminate vm_phys_bootstrap_alloc(). It was a failed attempt at
eliminating duplicated code in the various pmap implementations.

Micro-optimize vm_phys_free_pages().

Introduce vm_phys_free_contig(). It is fast routine for freeing an
arbitrary number of physically contiguous pages. In particular, it
doesn't require the number of pages to be a power of two.

Use "u_long" instead of "unsigned long".

Bruce Evans (bde@) has convinced me that the "boundary" parameters
to kmem_alloc_contig(), vm_phys_alloc_contig(), and
vm_reserv_reclaim_contig() should be of type "vm_paddr_t" and not
"u_long". Make this change.

Use "u_long" instead of "unsigned long".

Extract the code to translate VM error into errno, into an exported
function vm_mmap_to_errno(). It is useful for the drivers that implement
mmap(2)-like functionality, to be able to return error codes consistent
with mmap(2).

Sponsored by: The FreeBSD Foundation
No objections from: alc
MFC after: 1 week

Add a facility to disable processing page faults. When activated,
uiomove generates EFAULT if any accessed address is not mapped, as
opposed to handling the fault.

Sponsored by: The FreeBSD Foundation
Reviewed by: alc (previous version)

Move vm_object_print()'s prototype to the expected place.

Retire vm_fault_quick(). It's no longer used.

Reviewed by: kib@

Introduce and use a new VM interface for temporarily pinning pages. This
new interface replaces the combined use of vm_fault_quick() and
pmap_extract_and_hold() throughout the kernel.

In collaboration with: kib@

Introduce vm_fault_hold() and use it to (1) eliminate a long-standing race
condition in proc_rwmem() and to (2) simplify the implementation of the
cxgb driver's vm_fault_hold_user_pages(). Specifically, in proc_rwmem()
the requested read or write could fail because the targeted page could be
reclaimed between the calls to vm_fault() and vm_page_hold().

In collaboration with: kib@
MFC after: 6 weeks

Rework memguard(9) to reserve significantly more KVA to detect
use-after-free over a longer time. Also release the backing pages of
a guarded allocation at free(9) time to reduce the overhead of using
memguard(9). Allow setting and varying the malloc type at run-time.
Add knobs to allow:

- randomly guarding memory
- adding un-backed KVA guard pages to detect underflow and overflow
- a lower limit on the size of allocations that are guarded

Reviewed by: alc
Reviewed by: brueffer, Ulrich Spörlein <uqs spoerlein net> (man page)
Silence from: -arch
Approved by: zml (mentor)
MFC after: 1 month

o) Add a VM find-space option, VMFS_TLB_ALIGNED_SPACE, which searches the
address space for an address as aligned by the new pmap_align_tlb()
function, which is for constraints imposed by the TLB. [1]
o) Add a kmem_alloc_nofault_space() function, which acts like
kmem_alloc_nofault() but allows the caller to specify which find-space
option to use. [1]
o) Use kmem_alloc_nofault_space() with VMFS_TLB_ALIGNED_SPACE to allocate the
kernel stack address on MIPS. [1]
o) Make pmap_align_tlb() on MIPS align addresses so that they do not start on
an odd boundary within the TLB, so that they are suitable for insertion as
wired entries and do not have to share a TLB entry with another mapping,
assuming they are appropriately-sized.
o) Eliminate md_realstack now that the kstack will be appropriately-aligned on
MIPS.
o) Increase the number of guard pages to 2 so that we retain the proper
alignment of the kstack address.

Reviewed by: [1] alc
X-MFC-after: Making sure alc has not come up with a better interface.

Initialize the virtual memory-related resource limits in a single place.
Previously, one of these limits was initialized in two places to a
different value in each place. Moreover, because an unsigned int was used
to represent the amount of pageable physical memory, some of these limits
were incorrectly initialized on 64-bit architectures. (Currently, this
error is masked by login.conf's default settings.)

Make vm_thread_swapin() and vm_thread_swapout() static.

Submitted by: bde (an earlier version)
Reviewed by: kib

Introduce the function kmem_alloc_attr(), which allocates kernel virtual
memory with the specified physical attributes. In particular, like
kmem_alloc_contig(), the caller can specify the physical address range
from which the physical pages are allocated and the memory attributes
(i.e., cache behavior) for these physical pages. However, in contrast to
kmem_alloc_contig() or contigmalloc(), the physical pages that are
allocated by kmem_alloc_attr() are not necessarily physically contiguous.
This function is needed by DRM and VirtualBox.

Correct an error in the prototype for kmem_malloc(). The third argument
had the wrong type.

Tested by: rnoland
MFC after: 3 days

Simplify both the invocation and the implementation of vm_fault() for wiring
pages.

(Note: Claims made in the comments about the handling of breakpoints in
wired pages have been false for roughly a decade. This and another bug
involving breakpoints will be fixed in coming changes.)

Reviewed by: kib

o Introduce vm_sync_icache() for making the I-cache coherent with
the memory or D-cache, depending on the semantics of the platform.
vm_sync_icache() is basically a wrapper around pmap_sync_icache(),
that translates the vm_map_t argumument to pmap_t.
o Introduce pmap_sync_icache() to all PMAP implementation. For powerpc
it replaces the pmap_page_executable() function, added to solve
the I-cache problem in uiomove_fromphys().
o In proc_rwmem() call vm_sync_icache() when writing to a page that
has execute permissions. This assures that when breakpoints are
written, the I-cache will be coherent and the process will actually
hit the breakpoint.
o This also fixes the Book-E PMAP implementation that was missing
necessary locking while trying to deal with the I-cache coherency
in pmap_enter() (read: mmu_booke_enter_locked).

The key property of this change is that the I-cache is made coherent
*after* writes have been done. Doing it in the PMAP layer when adding
or changing a mapping means that the I-cache is made coherent *before*
any writes happen. The difference is key when the I-cache prefetches.

Reintroduce the r196640, after fixing the problem with my testing.

Remove the altkstacks, instead instantiate threads with kernel stack
allocated with the right size from the start. For the thread that has
kernel stack cached, verify that requested stack size is equial to the
actual, and reallocate the stack if sizes differ [1].

This fixes the bug introduced by r173361 that was committed several days
after r173004 and consisted of kthread_add(9) ignoring the non-default
kernel stack size.

Also, r173361 removed the caching of the kernel stacks for a non-first
thread in the process. Introduce separate kernel stack cache that keeps
some limited amount of preallocated kernel stacks to lower the latency
of thread allocation. Add vm_lowmem handler to prune the cache on
low memory condition. This way, system with reasonable amount of the
threads get lower latency of thread creation, while still not exhausting
significant portion of KVA for unused kstacks.

Submitted by: peter [1]
Discussed with: jhb, julian, peter
Reviewed by: jhb
Tested by: pho (and retested according to new test scenarious)
MFC after: 1 week

Reverse r196640 and r196644 for now.

Remove the altkstacks, instead instantiate threads with kernel stack
allocated with the right size from the start. For the thread that has
kernel stack cached, verify that requested stack size is equial to the
actual, and reallocate the stack if sizes differ [1].

This fixes the bug introduced by r173361 that was committed several days
after r173004 and consisted of kthread_add(9) ignoring the non-default
kernel stack size.

Also, r173361 removed the caching of the kernel stacks for a non-first
thread in the process. Introduce separate kernel stack cache that keeps
some limited amount of preallocated kernel stacks to lower the latency
of thread allocation. Add vm_lowmem handler to prune the cache on
low memory condition. This way, system with reasonable amount of the
threads get lower latency of thread creation, while still not exhausting
significant portion of KVA for unused kstacks.

Submitted by: peter [1]
Discussed with: jhb, julian, peter
Reviewed by: jhb
Tested by: pho
MFC after: 1 week

Add support to the virtual memory system for configuring machine-
dependent memory attributes:

Rename vm_cache_mode_t to vm_memattr_t. The new name reflects the
fact that there are machine-dependent memory attributes that have
nothing to do with controlling the cache's behavior.

Introduce vm_object_set_memattr() for setting the default memory
attributes that will be given to an object's pages.

Introduce and use pmap_page_{get,set}_memattr() for getting and
setting a page's machine-dependent memory attributes. Add full
support for these functions on amd64 and i386 and stubs for them on
the other architectures. The function pmap_page_set_memattr() is also
responsible for any other machine-dependent aspects of changing a
page's memory attributes, such as flushing the cache or updating the
direct map. The uses include kmem_alloc_contig(), vm_page_alloc(),
and the device pager:

kmem_alloc_contig() can now be used to allocate kernel memory with
non-default memory attributes on amd64 and i386.

vm_page_alloc() and the device pager will set the memory attributes
for the real or fictitious page according to the object's default
memory attributes.

Update the various pmap functions on amd64 and i386 that map pages to
incorporate each page's memory attributes in the mapping.

Notes: (1) Inherent to this design are safety features that prevent
the specification of inconsistent memory attributes by different
mappings on amd64 and i386. In addition, the device pager provides a
warning when a device driver creates a fictitious page with memory
attributes that are inconsistent with the real page that the
fictitious page is an alias for. (2) Storing the machine-dependent
memory attributes for amd64 and i386 as a dedicated "int" in "struct
md_page" represents a compromise between space efficiency and the ease
of MFCing these changes to RELENG_7.

In collaboration with: jhb

Approved by: re (kib)

When forking a vm space that has wired map entries, do not forget to
charge the objects created by vm_fault_copy_entry. The object charge
was set, but reserve not incremented.

Reported by: Greg Rivers <gcr+freebsd-current tharned org>
Reviewed by: alc (previous version)
Approved by: re (kensmith)

This change is the next step in implementing the cache control functionality
required by video card drivers. Specifically, this change introduces
vm_cache_mode_t with an appropriate VM_CACHE_DEFAULT definition on all
architectures. In addition, this changes adds a vm_cache_mode_t parameter
to kmem_alloc_contig() and vm_phys_alloc_contig(). These will be the
interfaces for allocating mapped kernel memory and physical memory,
respectively, with non-default cache modes.

In collaboration with: jhb

Implement global and per-uid accounting of the anonymous memory. Add
rlimit RLIMIT_SWAP that limits the amount of swap that may be reserved
for the uid.

The accounting information (charge) is associated with either map entry,
or vm object backing the entry, assuming the object is the first one
in the shadow chain and entry does not require COW. Charge is moved
from entry to object on allocation of the object, e.g. during the mmap,
assuming the object is allocated, or on the first page fault on the
entry. It moves back to the entry on forks due to COW setup.

The per-entry granularity of accounting makes the charge process fair
for processes that change uid during lifetime, and decrements charge
for proper uid when region is unmapped.

The interface of vm_pager_allocate(9) is extended by adding struct ucred *,
that is used to charge appropriate uid when allocation if performed by
kernel, e.g. md(4).

Several syscalls, among them is fork(2), may now return ENOMEM when
global or per-uid limits are enforced.

In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)

Eliminate unnecessary forward declarations.

Refactor contigmalloc() into two functions: a simple front-end that deals
with the malloc tag and calls a new back-end, kmem_alloc_contig(), that
allocates the pages and maps them.

The motivations for this change are two-fold: (1) A cache mode parameter
will be added to kmem_alloc_contig(). In other words, kmem_alloc_contig()
will be extended to support the allocation of memory with caller-specified
caching. (2) The UMA allocation function that is used by the two jumbo
frames zones can use kmem_alloc_contig() in place of contigmalloc() and
thereby avoid having free jumbo frames held by the zone counted as live
malloc()ed memory.

Eliminate dead code.

Reviewed by: jhb

Introduce a new parameter "superpage_align" to kmem_suballoc() that is
used to request superpage alignment for the submap.

Request superpage alignment for the kmem_map.

Pass VMFS_ANY_SPACE instead of TRUE to vm_map_find(). (They are currently
equivalent but VMFS_ANY_SPACE is the new preferred spelling.)

Remove a stale comment from kmem_malloc().

Fix for the panic("vm_thread_new: kstack allocation failed") and
silent NULL pointer dereference in the i386 and sparc64 pmap_pinit()
when the kmem_alloc_nofault() failed to allocate address space. Both
functions now return error instead of panicing or dereferencing NULL.

As consequence, vmspace_exec() and vmspace_unshare() returns the errno
int. struct vmspace arg was added to vm_forkproc() to avoid dealing
with failed allocation when most of the fork1() job is already done.

The kernel stack for the thread is now set up in the thread_alloc(),
that itself may return NULL. Also, allocation of the first process
thread is performed in the fork1() to properly deal with stack
allocation failure. proc_linkup() is separated into proc_linkup()
called from fork1(), and proc_linkup0(), that is used to set up the
kernel process (was known as swapper).

In collaboration with: Peter Holm
Reviewed by: jhb

Close race between vmspace_exitfree() and exit1() and races between
vmspace_exitfree() and vmspace_free() which could result in the same
vmspace being freed twice.

Factor out part of exit1() into new function vmspace_exit(). Attach
to vmspace0 to allow old vmspace to be freed earlier.

Add new function, vmspace_acquire_ref(), for obtaining a vmspace
reference for a vmspace belonging to another process. Avoid changing
vmspace refcount from 0 to 1 since that could also lead to the same
vmspace being freed twice.

Change vmtotal() and swapout_procs() to use vmspace_acquire_ref().

Reviewed by: alc

Use sf_buf_alloc() instead of vm_map_find() on exec_map to create the
ephemeral mappings that are used as the source for three copy
operations from kernel space to user space. There are two reasons for
making this change: (1) Under heavy load exec_map can fill up causing
vm_map_find() to fail. When it fails, the nascent process is aborted
(SIGABRT). Whereas, this reimplementation using sf_buf_alloc()
sleeps. (2) Although it is possible to sleep on vm_map_find()'s
failure until address space becomes available (see kmem_alloc_wait()),
using sf_buf_alloc() is faster. Furthermore, the reimplementation
uses a CPU private mapping, avoiding a TLB shootdown on
multiprocessors.

Problem uncovered by: kris@
Reviewed by: tegge@
MFC after: 3 weeks

- Change the vm_mmap() function to accept an objtype_t parameter specifying
the type of object represented by the handle argument.
- Allow vm_mmap() to map device memory via cdev objects in addition to
vnodes and anonymous memory. Note that mmaping a cdev directly does not
currently perform any MAC checks like mapping a vnode does.
- Unbreak the DRM getbufs ioctl by having it call vm_mmap() directly on the
cdev the ioctl is acting on rather than trying to find a suitable vnode
to map from.

Reviewed by: alc, arch@

Disable U area swapping and remove the routines that create, destroy,
copy, and swap U areas.

Reviewed by: arch@

For years, kmem_alloc_pageable() has been misused. Now that the last of
these misuses has been corrected, remove it before new ones appear, such as
arm/arm/pmap.c revision 1.8.

To date, unwiring a fictitious page has produced a panic. The reason
being that PHYS_TO_VM_PAGE() returns the wrong vm_page for fictitious
pages but unwiring uses PHYS_TO_VM_PAGE(). The resulting panic
reported an unexpected wired count. Rather than attempting to fix
PHYS_TO_VM_PAGE(), this fix takes advantage of the properties of
fictitious pages. Specifically, fictitious pages will never be
completely unwired. Therefore, we can keep a fictitious page's wired
count forever set to one and thereby avoid the use of
PHYS_TO_VM_PAGE() when we know that we're working with a fictitious
page, just not which one.

In collaboration with: green@, tegge@
PR: kern/29915

Remove advertising clause from University of California Regent's license,
per letter dated July 22, 1999.

Approved by: core

Revert to the original vslock() and vsunlock() API with the following
exceptions:
Retain the recently added vslock() error return.

The type of the len argument should be size_t, not u_int.

Suggested by: bde

Undo the merger of mlock()/vslock and munlock()/vsunlock() and the
introduction of kern_mlock() and kern_munlock() in
src/sys/kern/kern_sysctl.c 1.150
src/sys/vm/vm_extern.h 1.69
src/sys/vm/vm_glue.c 1.190
src/sys/vm/vm_mmap.c 1.179
because different resource limits are appropriate for transient and
"permanent" page wiring requests.

Retain the kern_mlock() and kern_munlock() API in the revived
vslock() and vsunlock() functions.

Combine the best parts of each of the original sets of implementations
with further code cleanup. Make the mclock() and vslock()
implementations as similar as possible.

Retain the RLIMIT_MEMLOCK check in mlock(). Move the most strigent
test, which can return EAGAIN, last so that requests that have no
hope of ever being satisfied will not be retried unnecessarily.

Disable the test that can return EAGAIN in the vslock() implementation
because it will cause the sysctl code to wedge.

Tested by: Cy Schubert <Cy.Schubert AT komquats.com>

Split the mlock() kernel code into two parts, mlock(), which unpacks
the syscall arguments and does the suser() permission check, and
kern_mlock(), which does the resource limit checking and calls
vm_map_wire(). Split munlock() in a similar way.

Enable the RLIMIT_MEMLOCK checking code in kern_mlock().

Replace calls to vslock() and vsunlock() in the sysctl code with
calls to kern_mlock() and kern_munlock() so that the sysctl code
will obey the wired memory limits.

Nuke the vslock() and vsunlock() implementations, which are no
longer used.

Add a member to struct sysctl_req to track the amount of memory
that is wired to handle the request.

Modify sysctl_wire_old_buffer() to return an error if its call to
kern_mlock() fails. Only wire the minimum of the length specified
in the sysctl request and the length specified in its argument list.
It is recommended that sysctl handlers that use sysctl_wire_old_buffer()
should specify reasonable estimates for the amount of data they
want to return so that only the minimum amount of memory is wired
no matter what length has been specified by the request.

Modify the callers of sysctl_wire_old_buffer() to look for the
error return.

Modify sysctl_old_user to obey the wired buffer length and clean up
its implementation.

Reviewed by: bms

Remove vm_page_alloc_contig(). It's now unused.

Remove long dead code, specifically, code related to munmapfd().
(See also vm/vm_mmap.c revision 1.173.)

Revert previous commit. Come back vslock(), all is forgiven.

Pointy hat to: bms

Retire vslock() and vsunlock() with extreme prejudice.

Discussed with: pete

Make swaponvp() static to the swap_pager.

Migrate the thread stack management functions from the machine-dependent
to the machine-independent parts of the VM. At the same time, this
introduces vm object locking for the non-i386 platforms.

Two details:

1. KSTACK_GUARD has been removed in favor of KSTACK_GUARD_PAGES. The
different machine-dependent implementations used various combinations
of KSTACK_GUARD and KSTACK_GUARD_PAGES. To disable guard page, set
KSTACK_GUARD_PAGES to 0.

2. Remove the (unnecessary) clearing of PG_ZERO in vm_thread_new. In
5.x, (but not 4.x,) PG_ZERO can only be set if VM_ALLOC_ZERO is passed
to vm_page_alloc() or vm_page_grab().

Move the *_new_altkstack() and *_dispose_altkstack() functions out of the
various pmap implementations into the machine-independent vm. They were
all identical.

- Add vm_paddr_t, a physical address type. This is required for systems
where physical addresses larger than virtual addresses, such as i386s
with PAE.
- Use this to represent physical addresses in the MI vm system and in the
i386 pmap code. This also changes the paddr parameter to d_mmap_t.
- Fix printf formats to handle physical addresses >4G in the i386 memory
detection code, and due to kvtop returning vm_paddr_t instead of u_long.

Note that this is a name change only; vm_paddr_t is still the same as
vm_offset_t on all currently supported platforms.

Sponsored by: DARPA, Network Associates Laboratories
Discussed with: re, phk (cdevsw change)

use 'void *' instead of 'caddr_t' for useracc, kernacc, vslock and vsunlock.

o Merge vm_fault_wire() and vm_fault_user_wire() by adding a new parameter,
user_wire.

Infrastructure tweaks to allow having both an Elf32 and an Elf64 executable
handler in the kernel at the same time. Also, allow for the
exec_new_vmspace() code to build a different sized vmspace depending on
the executable environment. This is a big help for execing i386 binaries
on ia64. The ELF exec code grows the ability to map partial pages when
there is a page size difference, eg: emulating 4K pages on 8K or 16K
hardware pages.

Flesh out the i386 emulation support for ia64. At this point, the only
binary that I know of that fails is cvsup, because the cvsup runtime
tries to execute code in pages not marked executable.

Obtained from: dfr (mostly, many tweaks from me).

Collect all the (now equivalent) pmap_new_proc/pmap_dispose_proc/
pmap_swapin_proc/pmap_swapout_proc functions from the MD pmap code
and use a single equivalent MI version. There are other cleanups
needed still.

While here, use the UMA zone hooks to keep a cache of preinitialized
proc structures handy, just like the thread system does. This eliminates
one dependency on 'struct proc' being persistent even after being freed.
There are some comments about things that can be factored out into
ctor/dtor functions if it is worth it. For now they are mostly just
doing statistics to get a feel of how it is working.

o Eliminate the use of grow_stack() and useracc() from sendsig(), osendsig(),
and osf1_sendsig().
o Eliminate the prototype for the MD grow_stack() now that it has been removed
from all platforms.

Remove an unused prototype.

Remove __P.

- Remove a number of extra newlines that do not belong here according to
style(9)
- Minor space adjustment in cases where we have "( ", " )", if(), return(),
while(), for(), etc.
- Add /* SYMBOL */ after a few #endifs.

Reviewed by: alc

Pre-KSE/M3 commit.
this is a low-functionality change that changes the kernel to access the main
thread of a process via the linked list of threads rather than
assuming that it is embedded in the process. It IS still embeded there
but remove all teh code that assumes that in preparation for the next commit
which will actually move it out.

Reviewed by: peter@freebsd.org, gallatin@cs.duke.edu, benno rice,

Fix a race with free'ing vmspaces at process exit when vmspaces are
shared.

Also introduce vm_endcopy instead of using pointer tricks when
initializing new vmspaces.

The race occured because of how the reference was utilized:
test vmspace reference,
possibly block,
decrement reference

When sharing a vmspace between multiple processes it was possible
for two processes exiting at the same time to test the reference
count, possibly block and neither one free because they wouldn't
see the other's update.

Submitted by: green

Move the code that computes the system load average from vm_meter.c
to kern_synch.c in preparation for adding some jitter to the
inter-sample time.

Note that the "vm.loadavg" sysctl still lives in vm_meter.c which
isn't the right place, but it is appropriate for the current (bad)
name of that sysctl.

Suggested by: jhb (some time ago)
Reviewed by: bde

KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after: ha ha ha ha

Rip some well duplicated code out of cpu_wait() and cpu_exit() and move
it to the MI area. KSE touched cpu_wait() which had the same change
replicated five ways for each platform. Now it can just do it once.
The only MD parts seemed to be dealing with fpu state cleanup and things
like vm86 cleanup on x86. The rest was identical.

XXX: ia64 and powerpc did not have cpu_throw(), so I've put a functional
stub in place.

Reviewed by: jake, tmm, dillon

Remove unused 3rd argument from vsunlock() which abused B_WRITE.

Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.

Remove unused declarations.

Fix bug in pipe code relating to writes of mmap'd but illegal address
spaces which cross a segment boundry in the page table. pmap_kextract()
is not designed for access to the user space portion of the page
table and cannot handle the null-page-directory-entry case.

The fix is to have vm_fault_quick() return a success or failure which
is then used to avoid calling pmap_kextract().

$Id$ -> $FreeBSD$

Add a function kmem_alloc_nofault() - same as kmem_alloc_pageable(), but
create a nofault entry. It will be used to allocate kmem for upages.

(I am not too happy with all this, but it's better than nothing).

Move the declaration of faultin() from the vm headers to proc.h, since
it is now referenced from a macro there (PHOLD()).

Mostly remove the VM_STACK OPTION.
This changes the definitions of a few items so that structures are the
same whether or not the option itself is enabled. This allows
people to enable and disable the option without recompilng the world.

As the author says:

|I ran into a problem pulling out the VM_STACK option. I was aware of this
|when I first did the work, but then forgot about it. The VM_STACK stuff
|has some code changes in the i386 branch. There need to be corresponding
|changes in the alpha branch before it can come out completely.

what is done:
|
|1) Pull the VM_STACK option out of the header files it appears in. This
|really shouldn't affect anything that executes with or without the rest
|of the VM_STACK patches. The vm_map_entry will then always have one
|extra element (avail_ssize). It just won't be used if the VM_STACK
|option is not turned on.
|
|I've also pulled the option out of vm_map.c. This shouldn't harm anything,
|since the routines that are enabled as a result are not called unless
|the VM_STACK option is enabled elsewhere.
|
|2) Add what appears to be appropriate code the the alpha branch, still
|protected behind the VM_STACK switch. I don't have an alpha machine,
|so we would need to get some testers with alpha machines to try it out.
|
|Once there is some testing, we can consider making the change permanent
|for both i386 and alpha.
|
[..]
|
|Once the alpha code is adequately tested, we can pull VM_STACK out
|everywhere.
|

Submitted by: "Richard Seaman, Jr." <dick@tar.com>

Add (but don't activate) code for a special VM option to make
downward growing stacks more general.
Add (but don't activate) code to use the new stack facility
when running threads, (specifically the linux threads support).
This allows people to use both linux compiled linuxthreads, and also the
native FreeBSD linux-threads port.

The code is conditional on VM_STACK. Not using this will
produce the old heavily tested system.

Submitted by: Richard Seaman <dick@tar.com>

This commit fixes various 64bit portability problems required for
FreeBSD/alpha. The most significant item is to change the command
argument to ioctl functions from int to u_long. This change brings us
inline with various other BSD versions. Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.

VM level code cleanups.

1) Start using TSM.
Struct procs continue to point to upages structure, after being freed.
Struct vmspace continues to point to pte object and kva space for kstack.
u_map is now superfluous.
2) vm_map's don't need to be reference counted. They always exist either
in the kernel or in a vmspace. The vmspaces are managed by reference
counts.
3) Remove the "wired" vm_map nonsense.
4) No need to keep a cache of kernel stack kva's.
5) Get rid of strange looking ++var, and change to var++.
6) Change more data structures to use our "zone" allocator. Added
struct proc, struct vmspace and struct vnode. This saves a significant
amount of kva space and physical memory. Additionally, this enables
TSM for the zone managed memory.
7) Keep ioopt disabled for now.
8) Remove the now bogus "single use" map concept.
9) Use generation counts or id's for data structures residing in TSM, where
it allows us to avoid unneeded restart overhead during traversals, where
blocking might occur.
10) Account better for memory deficits, so the pageout daemon will be able
to make enough memory available (experimental.)
11) Fix some vnode locking problems. (From Tor, I think.)
12) Add a check in ufs_lookup, to avoid lots of unneeded calls to bcmp.
(experimental.)
13) Significantly shrink, cleanup, and make slightly faster the vm_fault.c
code. Use generation counts, get rid of unneded collpase operations,
and clean up the cluster code.
14) Make vm_zone more suitable for TSM.

This commit is partially as a result of discussions and contributions from
other people, including DG, Tor Egge, PHK, and probably others that I
have forgotten to attribute (so let me know, if I forgot.)

This is not the infamous, final cleanup of the vnode stuff, but a necessary
step. Vnode mgmt should be correct, but things might still change, and
there is still some missing stuff (like ioopt, and physical backing of
non-merged cache files, debugging of layering concepts.)

caddr_t --> void *

Support an optional, sysctl enabled feature of idle process swapout. This
is apparently useful for large shell systems, or systems with long running
idle processes. To enable the feature:

sysctl -w vm.swap_idle_enabled=1

Please note that some of the other vm sysctl variables have been renamed
to be more accurate.
Submitted by: Much of it from Matt Dillon <dillon@best.net>

Fully implement vfork. Vfork is now much much faster than even our
fork. (On my machine, fork is about 240usecs, vfork is 78usecs.)

Implement rfork(!RFPROC !RFMEM), which allows a thread to divorce its memory
from the other threads of a group.

Implement rfork(!RFPROC RFCFDG), which closes all file descriptors, eliminating
possible existing shares with other threads/processes.

Implement rfork(!RFPROC RFFDG), which divorces the file descriptors for a
thread from the rest of the group.

Fix the case where a thread does an exec. It is almost nonsense for a thread
to modify the other threads address space by an exec, so we
now automatically divorce the address space before modifying it.

The biggie: Get rid of the UPAGES from the top of the per-process address
space. (!)

Have each process use the kernel stack and pcb in the kvm space. Since
the stacks are at a different address, we cannot copy the stack at fork()
and allow the child to return up through the function call tree to return
to user mode - create a new execution context and have the new process
begin executing from cpu_switch() and go to user mode directly.
In theory this should speed up fork a bit.

Context switch the tss_esp0 pointer in the common tss. This is a lot
simpler since than swithching the gdt[GPROC0_SEL].sd.sd_base pointer
to each process's tss since the esp0 pointer is a 32 bit pointer, and the
sd_base setting is split into three different bit sections at non-aligned
boundaries and requires a lot of twiddling to reset.

The 8K of memory at the top of the process space is now empty, and unmapped
(and unmappable, it's higher than VM_MAXUSER_ADDRESS).

Simplity the pmap code to manage process contexts, we no longer have to
double map the UPAGES, this simplifies and should measuably speed up fork().

The following parts came from John Dyson:

Set PG_G on the UPAGES that are now in kernel context, and invalidate
them when swapping them out.

Move the upages object (upobj) from the vmspace to the proc structure.

Now that the UPAGES (pcb and kernel stack) are out of user space, make
rfork(..RFMEM..) do what was intended by sharing the vmspace
entirely via reference counting rather than simply inheriting the mappings.

Correction to the prototype for vm_fault.

Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.

This is the kernel Lite/2 commit. There are some requisite userland
changes, so don't expect to be able to run the kernel as-is (very well)
without the appropriate Lite/2 userland changes.

The system boots and can mount UFS filesystems.

Untested: ext2fs, msdosfs, NFS
Known problems: Incorrect Berkeley ID strings in some files.
Mount_std mounts will not work until the getfsent
library routine is changed.

Reviewed by: various people
Submitted by: Jeffery Hsu <hsu@freebsd.org>

Make the long-awaited change from $Id$ to $FreeBSD$

This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.

Implement closer-to POSIX mlock semantics. The major difference is
that we do allow mlock to span unallocated regions (of course, not
mlocking them.) We also allow mlocking of RO regions (which the old
code couldn't.) The restriction there is that once a RO region is
wired (mlocked), it cannot be debugged (or EVER written to.)

Under normal usage, the new mlock code will be a significant improvement
over our old stuff.

Removed iprintf(). It was copied to db_iprintf() in ddb.

Attached vm ddb commands `show map', `show vmochk', `show object',
`show vmopag', `show page' and `show pageq'. Moved all vm ddb stuff
to the ends of the vm source files.

Changed printf() to db_printf(), `indent' to db_indent, and iprintf()
to db_iprintf() in ddb commands. Moved db_indent and db_iprintf()
from vm to ddb.

vm_page.c:
Don't use __pure. Staticized.

db_output.c:
Reduced page width from 80 to 79 to inhibit double spacing for long
lines (there are still some problems if words are printed across
column 79).

KGDB is dead. It may come back one day if somebody does it.

kern_descrip.c: add fdshare()/fdcopy()
kern_fork.c: add the tiny bit of code for rfork operation.
kern/sysv_*: shmfork() takes one less arg, it was never used.
sys/shm.h: drop "isvfork" arg from shmfork() prototype
sys/param.h: declare rfork args.. (this is where OpenBSD put it..)
sys/filedesc.h: protos for fdshare/fdcopy.
vm/vm_mmap.c: add minherit code, add rounding to mmap() type args where
it makes sense.
vm/*: drop unused isvfork arg.

Note: this rfork() implementation copies the address space mappings,
it does not connect the mappings together. ie: once the two processes
have split, the pages may be shared, but the address space is not. If one
does a mmap() etc, it does not appear in the other. This makes it not
useful for pthreads, but it is useful in it's own right for having
light-weight threads in a static shared address space.

Obtained from: Original by Ron Minnich, extended by OpenBSD

Changed vm_fault_quick in vm_machdep.c to be global. Needed for
new pipe code.

Another mega commit to staticize things.

Changes to support 1Tb filesizes. Pages are now named by an
(object,index) pair instead of (object,offset) pair.

Untangled the vm.h include file spaghetti.

Move all the VM sysctl stuff home where it belongs.

Reviewed by: julian with quick glances by bruce and others
Submitted by: terry (terry lambert)
This is a composite of 3 patch sets submitted by terry.
they are:
New low-level init code that supports loadbal modules better
some cleanups in the namei code to help terry in 16-bit character support
some changes to the mount-root code to make it a little more
modular..

NOTE: mounting root off cdrom or NFS MIGHT be broken as I haven't been able
to test those cases..

certainly mounting root of disk still works just fine..
mfs should work but is untested. (tomorrows task)

The low level init stuff includes a total rewrite of init_main.c
to make it possible for new modules to have an init phase by simply
adding an entry to a TEXT_SET (or is it DATA_SET) list. thus a new module can
be added to the kernel without editing any other files other than the
'files' file.

NOTE: libkvm, w, ps, 'top', and any other utility which depends on struct
proc or any VM system structure will have to be rebuilt!!!

Much needed overhaul of the VM system. Included in this first round of
changes:

1) Improved pager interfaces: init, alloc, dealloc, getpages, putpages,
haspage, and sync operations are supported. The haspage interface now
provides information about clusterability. All pager routines now take
struct vm_object's instead of "pagers".

2) Improved data structures. In the previous paradigm, there is constant
confusion caused by pagers being both a data structure ("allocate a
pager") and a collection of routines. The idea of a pager structure has
escentially been eliminated. Objects now have types, and this type is
used to index the appropriate pager. In most cases, items in the pager
structure were duplicated in the object data structure and thus were
unnecessary. In the few cases that remained, a un_pager structure union
was created in the object to contain these items.

3) Because of the cleanup of #1 & #2, a lot of unnecessary layering can now
be removed. For instance, vm_object_enter(), vm_object_lookup(),
vm_object_remove(), and the associated object hash list were some of the
things that were removed.

4) simple_lock's removed. Discussion with several people reveals that the
SMP locking primitives used in the VM system aren't likely the mechanism
that we'll be adopting. Even if it were, the locking that was in the code
was very inadequate and would have to be mostly re-done anyway. The
locking in a uni-processor kernel was a no-op but went a long way toward
making the code difficult to read and debug.

5) Places that attempted to kludge-up the fact that we don't have kernel
thread support have been fixed to reflect the reality that we are really
dealing with processes, not threads. The VM system didn't have complete
thread support, so the comments and mis-named routines were just wrong.
We now use tsleep and wakeup directly in the lock routines, for instance.

6) Where appropriate, the pagers have been improved, especially in the
pager_alloc routines. Most of the pager_allocs have been rewritten and
are now faster and easier to maintain.

7) The pagedaemon pageout clustering algorithm has been rewritten and
now tries harder to output an even number of pages before and after
the requested page. This is sort of the reverse of the ideal pagein
algorithm and should provide better overall performance.

8) Unnecessary (incorrect) casts to caddr_t in calls to tsleep & wakeup
have been removed. Some other unnecessary casts have also been removed.

9) Some almost useless debugging code removed.

10) Terminology of shadow objects vs. backing objects straightened out.
The fact that the vm_object data structure escentially had this
backwards really confused things. The use of "shadow" and "backing
object" throughout the code is now internally consistent and correct
in the Mach terminology.

11) Several minor bug fixes, including one in the vm daemon that caused
0 RSS objects to not get purged as intended.

12) A "default pager" has now been created which cleans up the transition
of objects to the "swap" type. The previous checks throughout the code
for swp->pg_data != NULL were really ugly. This change also provides
the rudiments for future backing of "anonymous" memory by something
other than the swap pager (via the vnode pager, for example), and it
allows the decision about which of these pagers to use to be made
dynamically (although will need some additional decision code to do
this, of course).

13) (dyson) MAP_COPY has been deprecated and the corresponding "copy
object" code has been removed. MAP_COPY was undocumented and non-
standard. It was furthermore broken in several ways which caused its
behavior to degrade to MAP_PRIVATE. Binaries that use MAP_COPY will
continue to work correctly, but via the slightly different semantics
of MAP_PRIVATE.

14) (dyson) Sharing maps have been removed. It's marginal usefulness in a
threads design can be worked around in other ways. Both #12 and #13
were done to simplify the code and improve readability and maintain-
ability. (As were most all of these changes)

TODO:

1) Rewrite most of the vnode pager to use VOP_GETPAGES/PUTPAGES. Doing
this will reduce the vnode pager to a mere fraction of its current size.

2) Rewrite vm_fault and the swap/vnode pagers to use the clustering
information provided by the new haspage pager interface. This will
substantially reduce the overhead by eliminating a large number of
VOP_BMAP() calls. The VOP_BMAP() filesystem interface should be
improved to provide both a "behind" and "ahead" indication of
contiguousness.

3) Implement the extended features of pager_haspage in swap_pager_haspage().
It currently just says 0 pages ahead/behind.

4) Re-implement the swap device (swstrategy) in a more elegant way, perhaps
via a much more general mechanism that could also be used for disk
striping of regular filesystems.

5) Do something to improve the architecture of vm_object_collapse(). The
fact that it makes calls into the swap pager and knows too much about
how the swap pager operates really bothers me. It also doesn't allow
for collapsing of non-swap pager objects ("unnamed" objects backed by
other pagers).

swapout_threads() -> swapout_procs().

Changed swap partition handling/allocation so that it doesn't
require specific partitions be mentioned in the kernel config
file ("swap on foo" is now obsolete).

From Poul-Henning:

The visible effect is this:

As default, unless
options "NSWAPDEV=23"
is in your config, you will have four swap-devices.
You can swapon(2) any block device you feel like, it doesn't have
to be in the kernel config.

There is a performance/resource win available by getting the NSWAPDEV right
(but only if you have just one swap-device ??), but using that as default
would be too restrictive.

The invisible effect is that:

Swap-handling disappears from the $arch part of the kernel.
It gets a lot simpler (-145 lines) and cleaner.

Reviewed by: John Dyson, David Greenman
Submitted by: Poul-Henning Kamp, with minor changes by me.

Changed "handle" from type caddr_t to void *; "handle" is several different
types of pointers, and "char *" is a bad choice for the type.

Add and move declarations to fix all of the warnings from `gcc -Wimplicit'
(except in netccitt, netiso and netns) and most of the warnings from
`gcc -Wnested-externs'. Fix all the bugs found. There were no serious
ones.

vm_extern.h: removed vm_allocate_with_pager.
Removed vm_user.c...it's now completely deprecated.

Removed vm_allocate(), vm_deallocate(), and vm_protect() functions. The
only function remaining in this file is vm_allocate_with_pager(), and this
will be going RSN. The file will be removed when this happens.

vm_inherit function has been deprecated.

Killed MACHVMCOMPAT function prototypes as the functions don't exist.

These changes embody the support of the fully coherent merged VM buffer cache,
much higher filesystem I/O performance, and much better paging performance. It
represents the culmination of over 6 months of R&D.

The majority of the merged VM/cache work is by John Dyson.

The following highlights the most significant changes. Additionally, there are
(mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to
support the new VM/buffer scheme.

vfs_bio.c:
Significant rewrite of most of vfs_bio to support the merged VM buffer cache
scheme. The scheme is almost fully compatible with the old filesystem
interface. Significant improvement in the number of opportunities for write
clustering.

vfs_cluster.c, vfs_subr.c
Upgrade and performance enhancements in vfs layer code to support merged
VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff.

vm_object.c:
Yet more improvements in the collapse code. Elimination of some windows that
can cause list corruption.

vm_pageout.c:
Fixed it, it really works better now. Somehow in 2.0, some "enhancements"
broke the code. This code has been reworked from the ground-up.

vm_fault.c, vm_page.c, pmap.c, vm_object.c
Support for small-block filesystems with merged VM/buffer cache scheme.

pmap.c vm_map.c
Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of
kernel PTs.

vm_glue.c
Much simpler and more effective swapping code. No more gratuitous swapping.

proc.h
Fixed the problem that the p_lock flag was not being cleared on a fork.

swap_pager.c, vnode_pager.c
Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the
code doesn't need it anymore.

machdep.c
Changes to better support the parameter values for the merged VM/buffer cache
scheme.

machdep.c, kern_exec.c, vm_glue.c
Implemented a seperate submap for temporary exec string space and another one
to contain process upages. This eliminates all map fragmentation problems
that previously existed.

ffs_inode.c, ufs_inode.c, ufs_readwrite.c
Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on
busy buffers.

Submitted by: John Dyson and David Greenman

Clean up previous commits (format for 80 columns...).

1) New "vm_page_alloc_contig" routine by me.
2) Created a new vm_page flag "PG_FREE" to help track free pages.
3) Use PG_FREE flag to detect inconsistencies in a few places.

Whoops, accidently left out some pieces of the munmapfd patch.

Made idempotent
Reviewed by:
Submitted by:

Added $Id$

The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.

Reviewed by: Rodney W. Grimes
Submitted by: John Dyson and David Greenman

This commit was generated by cvs2svn to compensate for changes in r1541,
which included commits to RCS files with non-trunk default branches.

BSD 4.4 Lite Kernel Sources