MFC 361633: Consistently include opt_ipsec.h for consumers of <netipsec/ipsec.h>.

This fixes ipsec.ko to include all of IPSEC_DEBUG.

MFC 348970,348974:
Make the warning intervals for deprecated crypto algorithms tunable.

348970:
Make the warning intervals for deprecated crypto algorithms tunable.

New sysctl/tunables can now set the interval (in seconds) between
rate-limited crypto warnings. The new sysctls are:
- kern.cryptodev_warn_interval for /dev/crypto
- net.inet.ipsec.crypto_warn_interval for IPsec
- kern.kgssapi_warn_interval for KGSSAPI

348974:
Move declaration of warninterval out from under COMPAT_FREEBSD32.

This fixes builds of kernels without COMPAT_FREEBSD32.

Revert r330897:

This was intended to be a non-functional change. It wasn't. The commit
message was thus wrong. In addition it broke arm, and merged crypto
related code.

Revert with prejudice.

This revert skips files touched in r316370 since that commit was since
MFCed. This revert also skips files that require $FreeBSD$ property
changes.

Thank you to those who helped me get out of this mess including but not
limited to gonzo, kevans, rgrimes.

Requested by: gjb (re)

Partial merge of the SPDX changes

These changes are incomplete but are making it difficult
to determine what other changes can/should be merged.

No objections from: pfg

MFC r329563:
Remove unused variables and sysctl declaration.

MFC r322750:
Fix the regression introduced in r275710.

When a security policy should match TCP connection with specific ports,
the SYN+ACK segment send by syncache_respond() is considered as forwarded
packet, because at this moment TCP connection does not have PCB structure,
and ip_output() is called without inpcb pointer. In this case SPIDX filled
for SP lookup will not contain TCP ports and security policy will not
be found. This can lead to unencrypted SYN+ACK on the wire.

This patch restores the old behavior, when ports will not be filled only
for forwarded packets.

Reported by: Dewayne Geraghty <dewayne.geraghty at heuristicsystems.com.au>

MFC r322751:
Remove stale comments.

MFC r321779:
Add inpcb pointer to struct ipsec_ctx_data and pass it to the pfil hook
from enc_hhook().

This should solve the problem when pf is used with if_enc(4) interface,
and outbound packet with existing PCB checked by pf, and this leads to
deadlock due to pf does its own PCB lookup and tries to take rlock when
wlock is already held.

Now we pass PCB pointer if it is known to the pfil hook, this helps to
avoid extra PCB lookup and thus rlock acquiring is not needed.
For inbound packets it is safe to pass NULL, because we do not held any
PCB locks yet.

PR: 220217
Sponsored by: Yandex LLC

MFC r319118:
Disable IPsec debugging code by default when IPSEC_DEBUG kernel option
is not specified.

Due to the long call chain IPsec code can produce the kernel stack
exhaustion on the i386 architecture. The debugging code usually is not
used, but it requires a lot of stack space to keep buffers for strings
formatting. This patch conditionally defines macros to disable building
of IPsec debugging code.

IPsec currently has two sysctl variables to configure debug output:
* net.key.debug variable is used to enable debug output for PF_KEY
protocol. Such debug messages are produced by KEYDBG() macro and
usually they can be interesting for developers.
* net.inet.ipsec.debug variable is used to enable debug output for
DPRINTF() macro and ipseclog() function. DPRINTF() macro usually
is used for development debugging. ipseclog() function is used for
debugging by administrator.

The patch disables KEYDBG() and DPRINTF() macros, and formatting buffers
declarations when IPSEC_DEBUG is not present in kernel config. This
reduces stack requirement for up to several hundreds of bytes.
The net.inet.ipsec.debug variable still can be used to enable ipseclog()
messages by administrator.

PR: 219476

MFC r319412:
Build kdebug_secreplay() function only when IPSEC_DEBUG is defined.
This should fix the build on sparc.

Approved by: re (kib)

MFC r304572 (by bz):
Remove the kernel optoion for IPSEC_FILTERTUNNEL, which was deprecated
more than 7 years ago in favour of a sysctl in r192648.

MFC r305122:
Remove redundant sanity checks from ipsec[46]_common_input_cb().

This check already has been done in the each protocol callback.

MFC r309144,309174,309201 (by fabient):
IPsec RFC6479 support for replay window sizes up to 2^32 - 32 packets.

Since the previous algorithm, based on bit shifting, does not scale
with large replay windows, the algorithm used here is based on
RFC 6479: IPsec Anti-Replay Algorithm without Bit Shifting.
The replay window will be fast to be updated, but will cost as many bits
in RAM as its size.

The previous implementation did not provide a lock on the replay window,
which may lead to replay issues.

Obtained from: emeric.poupon@stormshield.eu
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D8468

MFC r309143,309146 (by fabient):
In a dual processor system (2*6 cores) during IPSec throughput tests,
we see a lot of contention on the arc4 lock, used to generate the IV
of the ESP output packets.

The idea of this patch is to split this mutex in order to reduce the
contention on this lock.

Update r309143 to prevent false sharing.

Reviewed by: delphij, markm, ache
Approved by: so
Obtained from: emeric.poupon@stormshield.eu
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D8130

MFC r313330:
Merge projects/ipsec into head/.

Small summary
-------------

o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
option IPSEC_SUPPORT added. It enables support for loading
and unloading of ipsec.ko and tcpmd5.ko kernel modules.
o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by
default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type
support was removed. Added TCP/UDP checksum handling for
inbound packets that were decapsulated by transport mode SAs.
setkey(8) modified to show run-time NAT-T configuration of SA.
o New network pseudo interface if_ipsec(4) added. For now it is
build as part of ipsec.ko module (or with IPSEC kernel).
It implements IPsec virtual tunnels to create route-based VPNs.
o The network stack now invokes IPsec functions using special
methods. The only one header file <netipsec/ipsec_support.h>
should be included to declare all the needed things to work
with IPsec.
o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed.
Now these protocols are handled directly via IPsec methods.
o TCP_SIGNATURE support was reworked to be more close to RFC.
o PF_KEY SADB was reworked:
- now all security associations stored in the single SPI namespace,
and all SAs MUST have unique SPI.
- several hash tables added to speed up lookups in SADB.
- SADB now uses rmlock to protect access, and concurrent threads
can do SA lookups in the same time.
- many PF_KEY message handlers were reworked to reflect changes
in SADB.
- SADB_UPDATE message was extended to support new PF_KEY headers:
SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They
can be used by IKE daemon to change SA addresses.
o ipsecrequest and secpolicy structures were cardinally changed to
avoid locking protection for ipsecrequest. Now we support
only limited number (4) of bundled SAs, but they are supported
for both INET and INET6.
o INPCB security policy cache was introduced. Each PCB now caches
used security policies to avoid SP lookup for each packet.
o For inbound security policies added the mode, when the kernel does
check for full history of applied IPsec transforms.
o References counting rules for security policies and security
associations were changed. The proper SA locking added into xform
code.
o xform code was also changed. Now it is possible to unregister xforms.
tdb_xxx structures were changed and renamed to reflect changes in
SADB/SPDB, and changed rules for locking and refcounting.

Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9352

MFC r313331:
Add removed headers into the ObsoleteFiles.inc.

MFC r313561 (by glebius):
Move tcp_fields_to_net() static inline into tcp_var.h, just below its
friend tcp_fields_to_host(). There is third party code that also uses
this inline.

MFC r313697:
Remove IPsec related PCB code from SCTP.

The inpcb structure has inp_sp pointer that is initialized by
ipsec_init_pcbpolicy() function. This pointer keeps strorage for IPsec
security policies associated with a specific socket.
An application can use IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket
options to configure these security policies. Then ip[6]_output()
uses inpcb pointer to specify that an outgoing packet is associated
with some socket. And IPSEC_OUTPUT() method can use a security policy
stored in the inp_sp. For inbound packet the protocol-specific input
routine uses IPSEC_CHECK_POLICY() method to check that a packet conforms
to inbound security policy configured in the inpcb.

SCTP protocol doesn't specify inpcb for ip[6]_output() when it sends
packets. Thus IPSEC_OUTPUT() method does not consider such packets as
associated with some socket and can not apply security policies
from inpcb, even if they are configured. Since IPSEC_CHECK_POLICY()
method is called from protocol-specific input routine, it can specify
inpcb pointer and associated with socket inbound policy will be
checked. But there are two problems:
1. Such check is asymmetric, becasue we can not apply security policy
from inpcb for outgoing packet.
2. IPSEC_CHECK_POLICY() expects that caller holds INPCB lock and
access to inp_sp is protected. But for SCTP this is not correct,
becasue SCTP uses own locks to protect inpcb.

To fix these problems remove IPsec related PCB code from SCTP.
This imply that IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket options
will be not applicable to SCTP sockets. To be able correctly check
inbound security policies for SCTP, mark its protocol header with
the PR_LASTHDR flag.

Differential Revision: https://reviews.freebsd.org/D9538

MFC r313746:
Add missing check to fix the build with IPSEC_SUPPORT and without MAC.

MFC r313805:
Fix LINT build for powerpc.

Build kernel modules support only when both IPSEC and TCP_SIGNATURE
are not defined.

MFC r313922:
For translated packets do not adjust UDP checksum if it is zero.

In case when decrypted and decapsulated packet is an UDP datagram,
check that its checksum is not zero before doing incremental checksum
adjustment.

MFC r314339:
Document that the size of AH ICV for HMAC-SHA2-NNN should be half of
NNN bits as described in RFC4868.

PR: 215978

MFC r314812:
Introduce the concept of IPsec security policies scope.

Currently are defined three scopes: global, ifnet, and pcb.
Generic security policies that IKE daemon can add via PF_KEY interface
or an administrator creates with setkey(8) utility have GLOBAL scope.
Such policies can be applied by the kernel to outgoing packets and checked
agains inbound packets after IPsec processing.
Security policies created by if_ipsec(4) interfaces have IFNET scope.
Such policies are applied to packets that are passed through if_ipsec(4)
interface.
And security policies created by application using setsockopt()
IP_IPSEC_POLICY option have PCB scope. Such policies are applied to
packets related to specific socket. Currently there is no way to list
PCB policies via setkey(8) utility.

Modify setkey(8) and libipsec(3) to be able distinguish the scope of
security policies in the `setkey -DP` listing. Add two optional flags:
'-t' to list only policies related to virtual *tunneling* interfaces,
i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL
scope. By default policies from all scopes are listed.

To implement this PF_KEY's sadb_x_policy structure was modified.
sadb_x_policy_reserved field is used to pass the policy scope from the
kernel to userland. SADB_SPDDUMP message extended to support filtering
by scope: sadb_msg_satype field is used to specify bit mask of requested
scopes.

For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy
is used to pass if_ipsec's interface if_index to the userland. For GLOBAL
policies sadb_x_policy_priority is used only to manage order of security
policies in the SPDB. For IFNET policies it is not used, so it can be used
to keep if_index.

After this change the output of `setkey -DP` now looks like:
# setkey -DPt
0.0.0.0/0[any] 0.0.0.0/0[any] any
in ipsec
esp/tunnel/87.250.242.144-87.250.242.145/unique:145
spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0
refcnt=1
# setkey -DPg
::/0 ::/0 icmp6 135,0
out none
spid=5 seq=1 pid=872 scope=global
refcnt=1

Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9805

PR: 212018
Relnotes: yes
Sponsored by: Yandex LLC

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Remove stale function declaration

Constify mbuf pointer for IPSEC functions where mbuf isn't modified.

Overhaul if_enc(4) and make it loadable in run-time.

Use hhook(9) framework to achieve ability of loading and unloading
if_enc(4) kernel module. INET and INET6 code on initialization registers
two helper hooks points in the kernel. if_enc(4) module uses these helper
hook points and registers its hooks. IPSEC code uses these hhook points
to call helper hooks implemented in if_enc(4).

Implement the sadb_x_policy_priority field as it is done in Linux:
lower priority policies are inserted first.

Submitted by: Emeric Poupon <emeric.poupon@stormshield.eu>
Reviewed by: ae
Sponsored by: Stormshield

IPSEC, remove variable argument function its already due.

Differential Revision: https://reviews.freebsd.org/D3080
Reviewed by: gnn, ae
Approved by: gnn(mentor)

Make ipsec_in_reject() static. We use ipsec[46]_in_reject() instead.

Sponsored by: Yandex LLC

Change ipsec_address() and ipsec_logsastr() functions to take two
additional arguments - buffer and size of this buffer.

ipsec_address() is used to convert sockaddr structure to presentation
format. The IPv6 part of this function returns pointer to the on-stack
buffer and at the moment when it will be used by caller, it becames
invalid. IPv4 version uses 4 static buffers and returns pointer to
new buffer each time when it called. But anyway it is still possible
to get corrupted data when several threads will use this function.

ipsec_logsastr() is used to format string about SA entry. It also
uses static buffer and has the same problem with concurrent threads.

To fix these problems add the buffer pointer and size of this
buffer to arguments. Now each caller will pass buffer and its size
to these functions. Also convert all places where these functions
are used (except disabled code).

And now ipsec_address() uses inet_ntop() function from libkern.

PR: 185996
Differential Revision: https://reviews.freebsd.org/D2321
Reviewed by: gnn
Sponsored by: Yandex LLC

Fix possible memory leak and several races in the IPsec policy management
code.

Resurrect the state field in the struct secpolicy, it has
IPSEC_SPSTATE_ALIVE value when security policy linked in the chain,
and IPSEC_SPSTATE_DEAD value in all other cases. This field protects
from trying to unlink one security policy several times from the different
threads.

Take additional reference in the key_flush_spd() to be sure that policy
won't be freed from the different thread while we are sending SPDEXPIRE message.

Add KEY_FREESP() call to the key_unlink() to release additional reference
that we take when use key_getsp*() functions.

Differential Revision: https://reviews.freebsd.org/D1914
Tested by: Emeric POUPON <emeric.poupon at stormshield dot eu>
Reviewed by: hrs
Sponsored by: Yandex LLC

Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and
IPv6. Initialize it only once in def_policy_init(). Remove its
initialization from key_init() and make it static.

Remove several fields from struct secpolicy:
* lock - it isn't so useful having mutex in the structure, but the only
thing we do with it is initialization and destroying.
* state - it has only two values - DEAD and ALIVE. Instead of take a lock
and change the state to DEAD, then take lock again in GC function and
delete policy from the chain - keep in the chain only ALIVE policies.
* scangen - it was used in GC function to protect from sending several
SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries
in the chain and there is no need to have scangen variable.

Use TAILQ to implement SPD entries chain. Use rmlock to protect access
to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK
when we are inserting (or removing) SP entry in the chain.

Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9)
API to implement refcounting in SPD. Merge code from key_delsp() and
_key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases
when we want to release reference or just delete SP entry.

Obtained from: Yandex LLC
Sponsored by: Yandex LLC

Remove flag/flags argument from the following functions:
ipsec_getpolicybyaddr()
ipsec4_checkpolicy()
ip_ipsec_output()
ip6_ipsec_output()

The only flag used here was IP_FORWARDING.

Obtained from: Yandex LLC
Sponsored by: Yandex LLC

Remove flags and tunalready arguments from ipsec4_process_packet()
and make its prototype similar to ipsec6_process_packet.
The flags argument isn't used here, tunalready is always zero.

Obtained from: Yandex LLC
Sponsored by: Yandex LLC

Remove now unused mtag argument from ipsec*_common_input_cb.

Obtained from: Yandex LLC
Sponsored by: Yandex LLC

Remove __P() macro.

Suggested by: kevlo
Sponsored by: Yandex LLC

Remove route chaching support from ipsec code. It isn't used for some time.
* remove sa_route_union declaration and route_cache member from struct secashead;
* remove key_sa_routechange() call from ICMP and ICMPv6 code;
* simplify ip_ipsec_mtu();
* remove #include <net/route.h>;

Sponsored by: Yandex LLC

Remove unused structure declarations.

Sponsored by: Yandex LLC

Fix multiple incorrect SYSCTL arguments in the kernel:

- Wrong integer type was specified.

- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.

- Logical OR where binary OR was expected.

- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.

- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.

- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.

- Updated "EXAMPLES" section in SYSCTL manual page.

MFC after: 3 days
Sponsored by: Mellanox Technologies

Merge 'struct ip6protosw' and 'struct protosw' into one. Now we have
only one protocol switch structure that is shared between ipv4 and ipv6.

Phabric: D476
Reviewed by: jhb

Remove more constants related to static sysctl nodes. The MAXID constants
were primarily used to size the sysctl name list macros that were removed
in r254295. A few other constants either did not have an associated
sysctl node, or the associated node used OID_AUTO instead.

PR: ports/184525 (exp-run)

Remove most of the remaining sysctl name list macros. They were only
ever intended for use in sysctl(8) and it has not used them for many
years.

Reviewed by: bde
Tested by: exp-run by bdrewery

Remove the large part of struct ipsecstat. Only few fields of this
structure is used, but they already have equal fields in the struct
newipsecstat, that was introduced with FAST_IPSEC and then was merged
together with old ipsecstat structure.

This fixes kernel stack overflow on some architectures after migration
ipsecstat to PCPU counters.

Reported by: Taku YAMAMOTO, Maciej Milewski

Migrate structs ahstat, espstat, ipcompstat, ipipstat, pfkeystat,
ipsec4stat, ipsec6stat to PCPU counters.

Prepare network statistics structures for migration to PCPU counters.
Use uint64_t as type for all fields of structures.

Changed structures: ahstat, arpstat, espstat, icmp6_ifstat, icmp6stat,
in6_ifstat, ip6stat, ipcompstat, ipipstat, ipsecstat, mrt6stat, mrtstat,
pfkeystat, pim6stat, pimstat, rip6stat, udpstat.

Discussed with: arch@

Use IPSECSTAT_INC() and IPSEC6STAT_INC() macros for ipsec statistics
accounting.

MFC after: 2 weeks

Optimisation in IPSEC(4):
- Remove contention on ISR during the crypto operation by using rwlock(9).
- Remove a second lookup of the SA in the callback.

Gain on 6 cores CPU with SHA1/AES128 can be up to 30%.

Reviewed by: vanhu
MFC after: 1 month

MFP4: @176978-176982, 176984, 176990-176994, 177441

"Whitspace" churn after the VIMAGE/VNET whirls.

Remove the need for some "init" functions within the network
stack, like pim6_init(), icmp_init() or significantly shorten
others like ip6_init() and nd6_init(), using static initialization
again where possible and formerly missed.

Move (most) variables back to the place they used to be before the
container structs and VIMAGE_GLOABLS (before r185088) and try to
reduce the diff to stable/7 and earlier as good as possible,
to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9.

This also removes some header file pollution for putatively
static global variables.

Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are
no longer needed.

Reviewed by: jhb
Discussed with: rwatson
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
MFC after: 6 days

Correct typo in comment.

Remove unused VNET_SET() and related macros; only VNET_GET() is
ever actually used. Rename VNET_GET() to VNET() to shorten
variable references.

Discussed with: bz, julian
Reviewed by: bz
Approved by: re (kensmith, kib)

Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)

Add sysctls to toggle the behaviour of the (former) IPSEC_FILTERTUNNEL
kernel option.
This also permits tuning of the option per virtual network stack, as
well as separately per inet, inet6.

The kernel option is left for a transition period, marked deprecated,
and will be removed soon.

Initially requested by: phk (1 year 1 day ago)
MFC after: 4 weeks

Try to remove/assimilate as much of formerly IPv4/6 specific
(duplicate) code in sys/netipsec/ipsec.c and fold it into
common, INET/6 independent functions.

The file local functions ipsec4_setspidx_inpcb() and
ipsec6_setspidx_inpcb() were 1:1 identical after the change
in r186528. Rename to ipsec_setspidx_inpcb() and remove the
duplicate.

Public functions ipsec[46]_get_policy() were 1:1 identical.
Remove one copy and merge in the factored out code from
ipsec_get_policy() into the other. The public function left
is now called ipsec_get_policy() and callers were adapted.

Public functions ipsec[46]_set_policy() were 1:1 identical.
Rename file local ipsec_set_policy() function to
ipsec_set_policy_internal().
Remove one copy of the public functions, rename the other
to ipsec_set_policy() and adapt callers.

Public functions ipsec[46]_hdrsiz() were logically identical
(ignoring one questionable assert in the v6 version).
Rename the file local ipsec_hdrsiz() to ipsec_hdrsiz_internal(),
the public function to ipsec_hdrsiz(), remove the duplicate
copy and adapt the callers.
The v6 version had been unused anyway. Cleanup comments.

Public functions ipsec[46]_in_reject() were logically identical
apart from statistics. Move the common code into a file local
ipsec46_in_reject() leaving vimage+statistics in small AF specific
wrapper functions. Note: unfortunately we already have a public
ipsec_in_reject().

Reviewed by: sam
Discussed with: rwatson (renaming to *_internal)
MFC after: 26 days
X-MFC: keep wrapper functions for public symbols?

Make ipsec_getpolicybysock() static and no longer export it. It has not
been used outside this file since about the FAST_IPSEC -> IPSEC change.

MFC after: 4 weeks

Unify ipsec[46]_delete_pcbpolicy in ipsec_delete_pcbpolicy.
Ignoring different names because of macros (in6pcb, in6p_sp) and
inp vs. in6p variable name both functions were entirely identical.

Reviewed by: rwatson (as part of a larger changeset)
MFC after: 6 weeks (*)
(*) possibly need to leave a stub wrappers in 7 to keep the symbols.

Change the initialization methodology for global variables scheduled
for virtualization.

Instead of initializing the affected global variables at instatiation,
assign initial values to them in initializer functions. As a rule,
initialization at instatiation for such variables should never be
introduced again from now on. Furthermore, enclose all instantiations
of such global variables in #ifdef VIMAGE_GLOBALS blocks.

Essentialy, this change should have zero functional impact. In the next
phase of merging network stack virtualization infrastructure from
p4/vimage branch, the new initialization methology will allow us to
switch between using global variables and their counterparts residing in
virtualization containers with minimum code churn, and in the long run
allow us to intialize multiple instances of such container structures.

Discussed at: devsummit Strassburg
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation

Step 1.5 of importing the network stack virtualization infrastructure
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit

Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.

Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().

Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).

All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).

(*) netipsec/keysock.c did not validate depending on compile time options.

Implemented by: julian, bz, brooks, zec
Reviewed by: julian, bz, brooks, kris, rwatson, ...
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation

Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from: //depot/projects/vimage-commit2/...
Reviewed by: brooks, des, ed, mav, julian,
jamie, kris, rwatson, zec, ...
(various people I forgot, different versions)
md5 (with a bit of help)
Sponsored by: NLnet Foundation, The FreeBSD Foundation
X-MFC after: never
V_Commit_Message_Reviewed_By: more people than the patch

In addition to the ipsec_osdep.h removal a week ago, now also eliminate
IPSEC_SPLASSERT_SOFTNET which has been 'unused' since FreeBSD 5.0.

Remove last bits of OS adaptation code from the IPSec code.

Reviewed By: bz

Rather than passing around a cached 'priv', pass in an ucred to
ipsec*_set_policy and do the privilege check only if needed.

Try to assimilate both ip*_ctloutput code blocks calling ipsec*_set_policy.

Reviewed by: rwatson

Add sysctls to if_enc(4) to control whether the firewalls or
bpf will see inner and outer headers or just inner or outer
headers for incoming and outgoing IPsec packets.

This is useful in bpf to not have over long lines for debugging
or selcting packets based on the inner headers.
It also properly defines the behavior of what the firewalls see.

Last but not least it gives you if_enc(4) for IPv6 as well.

[ As some auxiliary state was not available in the later
input path we save it in the tdbi. That way tcpdump can give a
consistent view of either of (authentic,confidential) for both
before and after states. ]

Discussed with: thompsa (2007-04-25, basic idea of unifying paths)
Reviewed by: thompsa, gnn

Commit IPv6 support for FAST_IPSEC to the tree.
This commit includes only the kernel files, the rest of the files
will follow in a second commit.

Reviewed by: bz
Approved by: re
Supported by: Secure Computing

Add a pseudo interface for packet filtering IPSec connections before or after
encryption. There are two functions, a bpf tap which has a basic header with
the SPI number which our current tcpdump knows how to display, and handoff to
pfil(9) for packet filtering.

Obtained from: OpenBSD
Based on: kern/94829
No objections: arch, net
MFC after: 1 month

Hide net.inet.ipsec.test_{replay,integrity} sysctls under #ifdef REGRESSION.

Requested by: sam, rwatson

Introduce two new sysctls:

net.inet.ipsec.test_replay - When set to 1, IPsec will send packets with
the same sequence number. This allows to verify if the other side
has proper replay attacks detection.

net.inet.ipsec.test_integrity - When set 1, IPsec will send packets with
corrupted HMAC. This allows to verify if the other side properly
detects modified packets.

I used the first one to discover that we don't have proper replay attacks
detection in ESP (in fast_ipsec(4)).

promote fast ipsec's m_clone routine for public use; it is renamed
m_unshare and the caller can now control how mbufs are allocated

Reviewed by: andre, luigi, mlaier
MFC after: 1 week

/* -> /*- for license, minor formatting changes

Initial import of RFC 2385 (TCP-MD5) digest support.

This is the first of two commits; bringing in the kernel support first.
This can be enabled by compiling a kernel with options TCP_SIGNATURE
and FAST_IPSEC.

For the uninitiated, this is a TCP option which provides for a means of
authenticating TCP sessions which came into being before IPSEC. It is
still relevant today, however, as it is used by many commercial router
vendors, particularly with BGP, and as such has become a requirement for
interconnect at many major Internet points of presence.

Several parts of the TCP and IP headers, including the segment payload,
are digested with MD5, including a shared secret. The PF_KEY interface
is used to manage the secrets using security associations in the SADB.

There is a limitation here in that as there is no way to map a TCP flow
per-port back to an SPI without polluting tcpcb or using the SPD; the
code to do the latter is unstable at this time. Therefore this code only
supports per-host keying granularity.

Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6),
TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective
users of this feature, this will not pose any problem.

This implementation is output-only; that is, the option is honoured when
responding to a host initiating a TCP session, but no effort is made
[yet] to authenticate inbound traffic. This is, however, sufficient to
interwork with Cisco equipment.

Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with
local patches. Patches for tcpdump to validate TCP-MD5 sessions are also
available from me upon request.

Sponsored by: sentex.net

add spdcachelookup and spdcachemiss to our version of struct ipsecstat so
netstat works properly

Submitted by: "Bjoern A. Zeeb" <bzeeb+freebsd@zabbadoz.net>

fix build after KAME changes

MFp4: portability work, general cleanup, locking fixes

change 38496
o add ipsec_osdep.h that holds os-specific definitions for portability
o s/KASSERT/IPSEC_ASSERT/ for portability
o s/SPLASSERT/IPSEC_SPLASSERT/ for portability
o remove function names from ASSERT strings since line#+file pinpints
the location
o use __func__ uniformly to reduce string storage
o convert some random #ifdef DIAGNOSTIC code to assertions
o remove some debuggging assertions no longer needed

change 38498
o replace numerous bogus panic's with equally bogus assertions
that at least go away on a production system

change 38502 + 38530
o change explicit mtx operations to #defines to simplify
future changes to a different lock type

change 38531
o hookup ipv4 ctlinput paths to a noop routine; we should be
handling path mtu changes at least
o correct potential null pointer deref in ipsec4_common_input_cb

chnage 38685
o fix locking for bundled SA's and for when key exchange is required

change 38770
o eliminate recursion on the SAHTREE lock

change 38804
o cleanup some types: long -> time_t
o remove refrence to dead #define

change 38805
o correct some types: long -> time_t
o add scan generation # to secpolicy to deal with locking issues

change 38806
o use LIST_FOREACH_SAFE instead of handrolled code
o change key_flush_spd to drop the sptree lock before purging
an entry to avoid lock recursion and to avoid holding the lock
over a long-running operation
o misc cleanups of tangled and twisty code

There is still much to do here but for now things look to be
working again.

Supported by: FreeBSD Foundation

Locking and misc cleanups; most of which I've been running for >4 months:

o add locking
o strip irrelevant spl's
o split malloc types to better account for memory use
o remove unused IPSEC_NONBLOCK_ACQUIRE code
o remove dead code

Sponsored by: FreeBSD Foundation

FAST_IPSEC fixups:

o fix #ifdef typo
o must use "bounce functions" when dispatched from the protosw table

don't know how this stuff was missed in my testing; must've committed
the wrong bits

Pointy hat: sam
Submitted by: "Doug Ambrisko" <ambrisko@verniernetworks.com>

"Fast IPsec": this is an experimental IPsec implementation that is derived
from the KAME IPsec implementation, but with heavy borrowing and influence
of openbsd. A key feature of this implementation is that it uses the kernel
crypto framework to do all crypto work so when h/w crypto support is present
IPsec operation is automatically accelerated. Otherwise the protocol
implementations are rather differet while the SADB and policy management
code is very similar to KAME (for the moment).

Note that this implementation is enabled with a FAST_IPSEC option. With this
you get all protocols; i.e. there is no FAST_IPSEC_ESP option.

FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a
single system.

This software is well tested with IPv4 but should be considered very
experimental (i.e. do not deploy in production environments). This software
does NOT currently support IPv6. In fact do not configure FAST_IPSEC and
INET6 in the same system.

Obtained from: KAME + openbsd
Supported by: Vernier Networks