Revert r330897:

This was intended to be a non-functional change. It wasn't. The commit
message was thus wrong. In addition it broke arm, and merged crypto
related code.

Revert with prejudice.

This revert skips files touched in r316370 since that commit was since
MFCed. This revert also skips files that require $FreeBSD$ property
changes.

Thank you to those who helped me get out of this mess including but not
limited to gonzo, kevans, rgrimes.

Requested by: gjb (re)

Partial merge of the SPDX changes

These changes are incomplete but are making it difficult
to determine what other changes can/should be merged.

No objections from: pfg

MFC r329181

Update the MTU in affected routes when IPv6 RA changes the MTU

ip6_calcmtu() only looks at the interface MTU if neither the TCP hostcache
nor the route provides an MTU. Update the routes so they do not provide
stale MTUs.

This fixes UNH IPv6 conformance test cases v6LC_4_1_08 and v6LC_4_1_09,
which use a RA to reduce the link MTU from 1500 to 1280.

Reported and tested by: Farrell Woods <Farrell_Woods@Dell.com>
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D14257

MFC r326876:
Follow the RFC6980 and silently ignore following IPv6 NDP messages
that had the IPv6 fragmentation header:
o Neighbor Solicitation
o Neighbor Advertisement
o Router Solicitation
o Router Advertisement
o Redirect

Introduce M_FRAGMENTED mbuf flag, and set it after IPv6 fragment reassembly
is completed. Then check the presence of this flag in correspondig ND6
handling routines.

PR: 224247

MFC r313025, r313395, r314113, r314442, r315458, r315656

r313025:
Add tests for multi-fib IPv6 routing

PR: 196361
Submitted by: jhujhiti@adjectivism.org
Reported by: Jason Healy <jhealy@logn.net>
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp

r313395:
Add fibs_test:udp_dontroute6, another IPv6 multi-FIB test

PR: 196361
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp

r314113:
Remove tests/sys/netinet/fibs_tests's dependency on net/socat

Instead of bridging two tap interfaces with socat, just use an epair pair.

MFC after: 3 weeks
Sponsored by: Spectra Logic Corp

r314442:
Add an ATF test for IPv6 SLAAC with multiple fibs

Tests that an interface can get a SLAAC address and that it inserts its
routes into the correct fib. Does not test anything to do with NDP.

PR: 196361
Reviewed by: Erick Turnquist <jhujhiti@adjectivism.org>
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9776

r315458:
Constrain IPv6 routes to single FIBs when net.add_addr_allfibs=0

sys/netinet6/icmp6.c
Use the interface's FIB for source address selection in ICMPv6 error
responses.

sys/netinet6/in6.c
In in6_newaddrmsg, announce arrival of local addresses on the
interface's FIB only. In in6_lltable_rtcheck, use a per-fib ND6
cache instead of a single cache.

sys/netinet6/in6_src.c
In in6_selectsrc, use the caller's fib instead of the default fib.
In in6_selectsrc_socket, remove a superfluous check.

sys/netinet6/nd6.c
In nd6_lle_event, use the interface's fib for routing socket
messages. In nd6_is_new_addr_neighbor, check all FIBs when trying
to determine whether an address is a neighbor. Also, simplify the
code for point to point interfaces.

sys/netinet6/nd6.h
sys/netinet6/nd6.c
sys/netinet6/nd6_rtr.c
Make defrouter_select fib-aware, and make all of its callers pass in
the interface fib.

sys/netinet6/nd6_nbr.c
When inputting a Neighbor Solicitation packet, consider the
interface fib instead of the default fib for DAD. Output NS and
Neighbor Advertisement packets on the correct fib.

sys/netinet6/nd6_rtr.c
Allow installing the same host route on different interfaces in
different FIBs. If rt_add_addr_allfibs=0, only install or delete
the prefix route on the interface fib.

tests/sys/netinet/fibs_test.sh
Clear some expected failures, but add a skip for the newly revealed
BUG217871.

PR: 196361
Submitted by: Erick Turnquist <jhujhiti@adjectivism.org>
Reported by: Jason Healy <jhealy@logn.net>
Reviewed by: asomers
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9451

r315656:
Fix back-to-back runs of sys/netinet/fibs_test;slaac_on_nondefault_fib6

This test was failing if run twice because rtadvd takes too long to die.
The rtadvd process from the first run was still running when the
second run created its interfaces. The solution is to use SIGKILL during
the cleanup instead of SIGTERM so rtadvd will die faster.

While I'm here, randomize the addresses used for the test, which makes bugs
like this easier to spot, and fix the cleanup order to be the opposite of
the setup order

PR: 217871
MFC after: 18 days
X-MFC-With: 315458
Sponsored by: Spectra Logic Corp

MFC r306829, r310286, r311695:
Lock the ND prefix list and add refcounting for prefixes.

MFC r306792-r306795, r306826, r306828:
Miscellaneous ND6 code cleanups.

MFC r306285:
Rename ndpr_refcnt to ndpr_addrcnt.

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Exploit r301213 to fix in6 ifaddr locking in pfxlist_onlink_check().

Reviewed by: ae, hrs
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6639

Clean up callers of nd6_prelist_add().

nd6_prelist_add() sets *newp if and only if it is successful, so there's no
need for code that handles the case where the return value is 0 and
*newp == NULL. Fix some style bugs in nd6_prelist_add() while here.

MFC after: 1 week

Remove two useless local variables from prelist_update().

MFC after: 1 week

sys/net*: minor spelling fixes.

No functional change.

sys/net* : for pointers replace 0 with NULL.

Mostly cosmetical, no functional change.

Found with devel/coccinelle.

Modify defrouter_remove() to perform the router lookup before removal.

This allows some simplification of its callers. No functional change
intended.

Tested by: Larry Rosenman (as part of a larger change)
MFC after: 1 month

Lock the NDP default router list and count defrouter references.

This addresses a number of race conditions that can cause crashes as a
result of unsynchronized access to the list.

PR: 206904
Tested by: Larry Rosenman <ler@lerctr.org>,
Kevin Bowling <kevin.bowling@kev009.com>
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D5315

Use pfxrtr_del() instead of freeing advertising routers directly.

MFC after: 1 week

Rename the flags field of struct nd_defrouter to "raflags".

This field contains the flags inherited from the corresponding router
advertisement message and is not for storing private state.

MFC after: 1 week

Simplify defrtrlist_update() slightly in preparation for future changes.

No functional change intended.

MFC after: 1 week

Remove superfluous return statements from the neighbour discovery code.

MFC after: 1 week

Fix style around allocations from M_IP6NDP.

- Don't cast the return value of malloc(9).
- Use M_ZERO instead of explicitly calling bzero(9).

MFC after: 1 week

MFP r287070,r287073: split radix implementation and route table structure.

There are number of radix consumers in kernel land (pf,ipfw,nfs,route)
with different requirements. In fact, first 3 don't have _any_ requirements
and first 2 does not use radix locking. On the other hand, routing
structure do have these requirements (rnh_gen, multipath, custom
to-be-added control plane functions, different locking).
Additionally, radix should not known anything about its consumers internals.

So, radix code now uses tiny 'struct radix_head' structure along with
internal 'struct radix_mask_head' instead of 'struct radix_node_head'.
Existing consumers still uses the same 'struct radix_node_head' with
slight modifications: they need to pass pointer to (embedded)
'struct radix_head' to all radix callbacks.

Routing code now uses new 'struct rib_head' with different locking macro:
RADIX_NODE_HEAD prefix was renamed to RIB_ (which stands for routing
information base).

New net/route_var.h header was added to hold routing subsystem internal
data. 'struct rib_head' was placed there. 'struct rtentry' will also
be moved there soon.

Add new rt_foreach_fib_walk_del() function for deleting route entries
by filter function instead of picking into routing table details in
each consumer.
Remove now-unused rt_expunge() (eliminating last external RTF_RNH_LOCKED
user).
This simplifies future nexthops/mulitipath changes and rtrequest1_fib()
locking refactoring.

Actual changes:
Add "rt_chain" field to permit rte grouping while doing batched delete
from routing table (thus growing rte 200->208 on amd64).
Add "rti_filter" / "rti_filterdata" / "rti_spare" fields to rt_addrinfo
to pass filter function to various routing subsystems in standard way.
Convert all rt_expunge() customers to new rt_addinfo-based api and eliminate
rt_expunge().

Fix the handling of IPv6 On-Link Redirects.

On receipt of a redirect message, install an interface route for the
redirected destination. On removal of the corresponding Neighbor Cache
entry, remove the interface route.

This requires changes in rtredirect_fib() to cope with an AF_LINK
address for the gateway and with the absence of RTF_GATEWAY.

This fixes the "Redirected On-Link" test cases in the Tahi IPv6 Ready Logo
Phase 2 test suite.

Unrelated to the above, fix a recursion on the radix node head lock
triggered by the Tahi Redirected to Alternate Router test cases.

When I first wrote this patch in October 2012, all Section 2
(Neighbor Discovery) test cases passed on 10-CURRENT, 9-STABLE,
and 8-STABLE. cem@ recently rebased the 10.x patch onto head and reported
that it passes Tahi. (Thanks!)

These other test cases also passed in 2012:

* the RTF_MODIFIED case, with IPv4 and IPv6 (using a
RTF_HOST|RTF_GATEWAY route for the destination)

* the redirected-to-self case, with IPv4 and IPv6

* a valid IPv4 redirect

All testing in 2012 was done with WITNESS and INVARIANTS.

Tested by: EMC / Isilon Storage Division via Conrad Meyer (cem) in 2015,
Mark Kelley <mark_kelley@dell.com> in 2012,
TC Telkamp <terence_telkamp@dell.com> in 2012
PR: 152791
Reviewed by: melifaro (current rev), bz (earlier rev)
Approved by: kib (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D3602

Rename rt_foreach_fib() to rt_foreach_fib_walk().

Suggested by: julian

MFP r274295:

* Move interface route cleanup to route.c:rt_flushifroutes()
* Convert most of "for (fibnum = 0; fibnum < rt_numfibs; fibnum++)" users
to use new rt_foreach_fib() instead of hand-rolling cycles.

Mitigate Local Denial of Service with IPv6 Router Advertisements
and log attack attempts.

Submitted by: hrs
Security: FreeBSD-SA-15:09.nd6
Security: CVE-2015-2923

Use in6_localip() instead of hand-rolled cycle.

MFC after: 2 weeks

Add in6_prepare_ifra() function to ease preparing in-kernel IPv6
address requests.

MFC after: 2 weeks

Introduce IN6_MASK_ADDR() macro to unify various hand-rolled code
to do IPv6 addr & mask in different places.

MFC after: 2 weeks

The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

- Use time_uptime instead of time_second in data structures for
PF_INET6 in kernel. This fixes various malfunction when the wall time
clock is changed. Bump __FreeBSD_version to 1000041.

- Use clock_gettime(CLOCK_MONOTONIC_FAST) in userland utilities.

MFC after: 1 month

Delete the nd6 entries associated with an off-link prefix
if the same prefix cannot be found on an alternative
interface.

Reviewed by: hrs
MFC after: 1 week

Reduce the overhead of locking, use IF_AFDATA_RLOCK() when we are doing
simple lookups.

Sponsored by: Yandex LLC
MFC after: 1 week

Remove __P.

Submitted by: kevlo
Reviewed by: md5(1)
MFC after: 2 months

Mechanically remove the last stray remains of spl* calls from net*/*.
They have been Noop's for a long time now.

Merge multi-FIB IPv6 support from projects/multi-fibv6/head/:

Extend the so far IPv4-only support for multiple routing tables (FIBs)
introduced in r178888 to IPv6 providing feature parity.

This includes an extended rtalloc(9) KPI for IPv6, the necessary
adjustments to the network stack, and user land support as in netstat.

Sponsored by: Cisco Systems, Inc.
Reviewed by: melifaro (basically)
MFC after: 10 days

Convert all users of IF_ADDR_LOCK to use new locking macros that specify
either a read lock or write lock.

Reviewed by: bz
MFC after: 2 weeks

Mark a couple of file local functions static and stop exporting them.

MFC after: 1 week

Use queue(3) macros instead of home-rolled versions in several places in
the INET6 code. This includes retiring the 'ndpr_next' and 'pfr_next'
macros.

Submitted by: pluknet (earlier version)
Reviewed by: pluknet

A default route learned from the RAs could be deleted manually
after its installation. This removal may be accidental and can
prevent the default route from being installed in the future if
the associated default router has the best preference. The cause
is the lack of status update in the default router on the state
of its route installation in the kernel FIB. This patch fixes
the described problem.

Reviewed by: hrs, discussed with hrs
MFC after: 5 days

Add $ipv6_cpe_wanif to enable functionality required for IPv6 CPE
(r225485). When setting an interface name to it, the following
configurations will be enabled:

1. "no_radr" is set to all IPv6 interfaces automatically.

2. "-no_radr accept_rtadv" will be set only for $ipv6_cpe_wanif. This is
done just before evaluating $ifconfig_IF_ipv6 in the rc.d scripts (this
means you can manually supersede this configuration if necessary).

3. The node will add RA-sending routers to the default router list
even if net.inet6.ip6.forwarding=1.

This mode is added to conform to RFC 6204 (a router which connects
the end-user network to a service provider network). To enable
packet forwarding, you still need to set ipv6_gateway_enable=YES.

Note that accepting router entries into the default router list when
packet forwarding capability and a routing daemon are enabled can
result in messing up the routing table. To minimize such unexpected
behaviors, "no_radr" is set on all interfaces but $ipv6_cpe_wanif.

Approved by: re (bz)

- Accept Router Advertisement messages even when net.inet6.ip6.forwarding=1.

- A new per-interface knob IFF_ND6_NO_RADR and sysctl IPV6CTL_NO_RADR.
This controls if accepting a route in an RA message as the default route.
The default value for each interface can be set by net.inet6.ip6.no_radr.
The system wide default value is 0.

- A new sysctl: net.inet6.ip6.norbit_raif. This controls if setting R-bit in
NA on RA accepting interfaces. The default is 0 (R-bit is set based on
net.inet6.ip6.forwarding).

Background:

IPv6 host/router model suggests a router sends an RA and a host accepts it for
router discovery. Because of that, KAME implementation does not allow
accepting RAs when net.inet6.ip6.forwarding=1. Accepting RAs on a router can
make the routing table confused since it can change the default router
unintentionally.

However, in practice there are cases where we cannot distinguish a host from
a router clearly. For example, a customer edge router often works as a host
against the ISP, and as a router against the LAN at the same time. Another
example is a complex network configurations like an L2TP tunnel for IPv6
connection to Internet over an Ethernet link with another native IPv6 subnet.
In this case, the physical interface for the native IPv6 subnet works as a
host, and the pseudo-interface for L2TP works as the default IP forwarding
route.

Problem:

Disabling processing RA messages when net.inet6.ip6.forwarding=1 and
accepting them when net.inet6.ip6.forward=0 cause the following practical
issues:

- A router cannot perform SLAAC. It becomes a problem if a box has
multiple interfaces and you want to use SLAAC on some of them, for
example. A customer edge router for IPv6 Internet access service
using an IPv6-over-IPv6 tunnel sometimes needs SLAAC on the
physical interface for administration purpose; updating firmware
and so on (link-local addresses can be used there, but GUAs by
SLAAC are often used for scalability).

- When a host has multiple IPv6 interfaces and it receives multiple RAs on
them, controlling the default route is difficult. Router preferences
defined in RFC 4191 works only when the routers on the links are
under your control.

Details of Implementation Changes:

Router Advertisement messages will be accepted even when
net.inet6.ip6.forwarding=1. More precisely, the conditions are as
follow:

(ACCEPT_RTADV && !NO_RADR && !ip6.forwarding)
=> Normal RA processing on that interface. (as IPv6 host)

(ACCEPT_RTADV && (NO_RADR || ip6.forwarding))
=> Accept RA but add the router to the defroute list with
rtlifetime=0 unconditionally. This effectively prevents
from setting the received router address as the box's
default route.

(!ACCEPT_RTADV)
=> No RA processing on that interface.

ACCEPT_RTADV and NO_RADR are per-interface knob. In short, all interface
are classified as "RA-accepting" or not. An RA-accepting interface always
processes RA messages regardless of ip6.forwarding. The difference caused by
NO_RADR or ip6.forwarding is whether the RA source address is considered as
the default router or not.

R-bit in NA on the RA accepting interfaces is set based on
net.inet6.ip6.forwarding. While RFC 6204 W-1 rule (for CPE case) suggests
a router should disable the R-bit completely even when the box has
net.inet6.ip6.forwarding=1, I believe there is no technical reason with
doing so. This behavior can be set by a new sysctl net.inet6.ip6.norbit_raif
(the default is 0).

Usage:

# ifconfig fxp0 inet6 accept_rtadv
=> accept RA on fxp0
# ifconfig fxp0 inet6 accept_rtadv no_radr
=> accept RA on fxp0 but ignore default route information in it.
# sysctl net.inet6.ip6.norbit_no_radr=1
=> R-bit in NAs on RA accepting interfaces will always be set to 0.

After some off-list discussion, revert a number of changes to the
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files. A better long-term solution is
still being considered. This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.

Changes reverted:

------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines

Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.

------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines

Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.

------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines

Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.

Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.

MFP4: @176978-176982, 176984, 176990-176994, 177441

"Whitspace" churn after the VIMAGE/VNET whirls.

Remove the need for some "init" functions within the network
stack, like pim6_init(), icmp_init() or significantly shorten
others like ip6_init() and nd6_init(), using static initialization
again where possible and formerly missed.

Move (most) variables back to the place they used to be before the
container structs and VIMAGE_GLOABLS (before r185088) and try to
reduce the diff to stable/7 and earlier as good as possible,
to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9.

This also removes some header file pollution for putatively
static global variables.

Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are
no longer needed.

Reviewed by: jhb
Discussed with: rwatson
Sponsored by: The FreeBSD Foundation
Sponsored by: CK Software GmbH
MFC after: 6 days

The IFA_RTSELF address flag marks a loopback route has been installed
for the interface address. This marker is necessary to properly support
PPP types of links where multiple links can have the same local end
IP address. The IFA_RTSELF flag bit maps to the RTF_HOST value, which
was combined into the route flag bits during prefix installation in
IPv6. This inclusion causing the prefix route to be unusable. This
patch fixes this bug by excluding the IFA_RTSELF flag during route
installation.

MFC after: 5 days

Improve flexibility of receiving Router Advertisement and
automatic link-local address configuration:

- Convert a sysctl net.inet6.ip6.accept_rtadv to one for the
default value of a per-IF flag ND6_IFF_ACCEPT_RTADV, not a
global knob. The default value of the sysctl is 0.

- Add a new per-IF flag ND6_IFF_AUTO_LINKLOCAL and convert a
sysctl net.inet6.ip6.auto_linklocal to one for its default
value. The default value of the sysctl is 1.

- Make ND6_IFF_IFDISABLED more robust. It can be used to disable
IPv6 functionality of an interface now.

- Receiving RA is allowed if ip6_forwarding==0 *and*
ND6_IFF_ACCEPT_RTADV is set on that interface. The former
condition will be revisited later to support a "host + router" box
like IPv6 CPE router. The current behavior is compatible with
the older releases of FreeBSD.

- The ifconfig(8) now supports these ND6 flags as well as "nud",
"prefer_source", and "disabled" in ndp(8). The ndp(8) now
supports "auto_linklocal".

Discussed with: bz and jinmei
Reviewed by: bz
MFC after: 3 days

Prefix on-link verification is being performed on statically
configured prefixes. Since these statically configured prefixes
do not have any associated advertising routers, these prefixes
are treated as unreachable and those prefix routes are deleted
from the routing table. Therefore bypass prefixes that are not
learned from router advertisements during prefix on-link check.

Reviewed by: hrs

Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by: bz
Approved by: re (vimage blanket)

Remove unused VNET_SET() and related macros; only VNET_GET() is
ever actually used. Rename VNET_GET() to VNET() to shorten
variable references.

Discussed with: bz, julian
Reviewed by: bz
Approved by: re (kensmith, kib)

Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)

Add address list locking for in6_ifaddrhead/ia_link: as with locking
for in_ifaddrhead, we stick with an rwlock for the time being, which
we will revisit in the future with a possible move to rmlocks.

Some pieces of code require significant further reworking to be
safe from all classes of writer-writer races.

Reviewed by: bz
MFC after: 6 weeks

Convert netinet6 to using queue(9) rather than hand-crafted linked lists
for the global IPv6 address list (in6_ifaddr -> in6_ifaddrhead). Adopt
the code styles and conventions present in netinet where possible.

Reviewed by: gnn, bz
MFC after: 6 weeks (possibly not MFCable?)

Modify most routines returning 'struct ifaddr *' to return references
rather than pointers, requiring callers to properly dispose of those
references. The following routines now return references:

ifaddr_byindex
ifa_ifwithaddr
ifa_ifwithbroadaddr
ifa_ifwithdstaddr
ifa_ifwithnet
ifaof_ifpforaddr
ifa_ifwithroute
ifa_ifwithroute_fib
rt_getifa
rt_getifa_fib
IFP_TO_IA
ip_rtaddr
in6_ifawithifp
in6ifa_ifpforlinklocal
in6ifa_ifpwithaddr
in6_ifadd
carp_iamatch6
ip6_getdstifaddr

Remove unused macro which didn't have required referencing:

IFP_TO_IA6

This closes many small races in which changes to interface
or address lists while an ifaddr was in use could lead to use of freed
memory (etc). In a few cases, add missing if_addr_list locking
required to safely acquire references.

Because of a lack of deep copying support, we accept a race in which
an in6_ifaddr pointed to by mbuf tags and extracted with
ip6_getdstifaddr() doesn't hold a reference while in transmit. Once
we have mbuf tag deep copy support, this can be fixed.

Reviewed by: bz
Obtained from: Apple, Inc. (portions)
MFC after: 6 weeks (portions)

After r193232 rt_tables in vnet.h are no longer indirectly dependent on
the ROUTETABLES kernel option thus there is no need to include opt_route.h
anymore in all consumers of vnet.h and no longer depend on it for module
builds.

Remove the hidden include in flowtable.h as well and leave the two
explicit #includes in ip_input.c and ip_output.c.

Convert the two dimensional array to be malloced and introduce
an accessor function to get the correct rnh pointer back.

Update netstat to get the correct pointer using kvm_read()
as well.

This not only fixes the ABI problem depending on the kernel
option but also permits the tunable to overwrite the kernel
option at boot time up to MAXFIBS, enlarging the number of
FIBs without having to recompile. So people could just use
GENERIC now.

Reviewed by: julian, rwatson, zec
X-MFC: not possible

In preparation for turning on options VIMAGE in next commits,
rearrange / replace / adjust several INIT_VNET_* initializer
macros, all of which currently resolve to whitespace.

Reviewed by: bz (an older version of the patch)
Approved by: julian (mentor)

Prefer structure fields (ifa_link) to macro aliases for them
(ifa_list).

MFC after: 2 weeks

Acquire interface address list lock around access to if_addrhead,
closing several writer-writer races, and some read-write races.

MFC after: 2 weeks

Use TAILQ_FOREACH() and TAILQ_FOREACH_SAFE() rather than manually
accessing queue(9) structure fields for if_addrhead.

Prefer FreeBSD field name if_addrhead to compatibility macro
if_addrlist.

MFC after: 2 weeks

Update stats in struct icmpstat and icmp6stat using four new
macros: ICMPSTAT_ADD(), ICMPSTAT_INC(), ICMP6STAT_ADD(), and
ICMP6STAT_INC(), rather than directly manipulating the fields
of these structures across the kernel. This will make it
easier to change the implementation of these statistics,
such as using per-CPU versions of the data structures.

In on case, icmp6stat members are manipulated indirectly, by
icmp6_errcount(), and this will require further work to fix
for per-CPU stats.

MFC after: 3 days

For all files including net/vnet.h directly include opt_route.h and
net/route.h.

Remove the hidden include of opt_route.h and net/route.h from net/vnet.h.

We need to make sure that both opt_route.h and net/route.h are included
before net/vnet.h because of the way MRT figures out the number of FIBs
from the kernel option. If we do not, we end up with the default number
of 1 when including net/vnet.h and array sizes are wrong.

This does not change the list of files which depend on opt_route.h
but we can identify them now more easily.

When iterating through the list trying to find a router in
defrouter_select(), NULL the cached llentry after unlocking
as we are no longer interested in it and with the second
iteration would try to unlock it again resulting in
panic: Lock (rw) lle not locked @ ...

Reported by: Mark Atkinson <m.atkinson@f5.com>
Tested by: Mark Atkinson <m.atkinson@f5.com>
PR: kern/128247 (in follow-up, unrelated to original report)

Remove unused local MACROs.

Submitted by: Christoph Mallon christoph.mallon@gmx.de
MFC after: 2 weeks

Remove the rt argument from nd6_storelladdr() because
rt is no longer accessed.

A couple of files were not meant to be committed.

in6_clsroute() was applied to prefix routes causing some
of them to expire. in6_clsroute() was only applied to
cloned routes that are no longer applicable after the
arp-v2 commit.

* Compare pointer with NULL
* Remove trailing whitespace (added in r186162)
* Reduce indentation by rephrasing test

Submitted by: Christopher Mallon (christoph dot mallon at gmx dot de)

simplify locking in find_pfxlist_reachable_router

need to check that lle is not null before unlock if the break condition is not met
also fix the break condition to explicitly check against NULL

unlock the llentry after use in find_pfxlist_reachable_router

unlock looked up llentrys in defrouter_select

This main goals of this project are:
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,

The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.

Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:

- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion

Add missing include to sys/lock.h before sys/rwlock.h

- convert radix node head lock from mutex to rwlock
- make radix node head lock not recursive
- fix LOR in rtexpunge
- fix LOR in rtredirect

Reviewed by: sam

Rather than using hidden includes (with cicular dependencies),
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.

For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.

Reviewed by: brooks, gnn, des, zec, imp
Sponsored by: The FreeBSD Foundation

Merge more of currently non-functional (i.e. resolving to
whitespace) macros from p4/vimage branch.

Do a better job at enclosing all instantiations of globals
scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks.

De-virtualize and mark as const saorder_state_alive and
saorder_state_any arrays from ipsec code, given that they are never
updated at runtime, so virtualizing them would be pointless.

Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation

Change the initialization methodology for global variables scheduled
for virtualization.

Instead of initializing the affected global variables at instatiation,
assign initial values to them in initializer functions. As a rule,
initialization at instatiation for such variables should never be
introduced again from now on. Furthermore, enclose all instantiations
of such global variables in #ifdef VIMAGE_GLOBALS blocks.

Essentialy, this change should have zero functional impact. In the next
phase of merging network stack virtualization infrastructure from
p4/vimage branch, the new initialization methology will allow us to
switch between using global variables and their counterparts residing in
virtualization containers with minimum code churn, and in the long run
allow us to intialize multiple instances of such container structures.

Discussed at: devsummit Strassburg
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation

Step 1.5 of importing the network stack virtualization infrastructure
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit

Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.

Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().

Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).

All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).

(*) netipsec/keysock.c did not validate depending on compile time options.

Implemented by: julian, bz, brooks, zec
Reviewed by: julian, bz, brooks, kris, rwatson, ...
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation

Fix some of the formatting fixes.. It's amazing how some thing stand out
in a commit message.

A bunch of formatting fixes brough to light by, or created by the Vimage commit
a few days ago.

Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from: //depot/projects/vimage-commit2/...
Reviewed by: brooks, des, ed, mav, julian,
jamie, kris, rwatson, zec, ...
(various people I forgot, different versions)
md5 (with a bit of help)
Sponsored by: NLnet Foundation, The FreeBSD Foundation
X-MFC after: never
V_Commit_Message_Reviewed_By: more people than the patch

Add code to allow the system to handle multiple routing tables.
This particular implementation is designed to be fully backwards compatible
and to be MFC-able to 7.x (and 6.x)

Currently the only protocol that can make use of the multiple tables is IPv4
Similar functionality exists in OpenBSD and Linux.

From my notes:

-----

One thing where FreeBSD has been falling behind, and which by chance I
have some time to work on is "policy based routing", which allows
different
packet streams to be routed by more than just the destination address.

Constraints:
------------

I want to make some form of this available in the 6.x tree
(and by extension 7.x) , but FreeBSD in general needs it so I might as
well do it in -current and back port the portions I need.

One of the ways that this can be done is to have the ability to
instantiate multiple kernel routing tables (which I will now
refer to as "Forwarding Information Bases" or "FIBs" for political
correctness reasons). Which FIB a particular packet uses to make
the next hop decision can be decided by a number of mechanisms.
The policies these mechanisms implement are the "Policies" referred
to in "Policy based routing".

One of the constraints I have if I try to back port this work to
6.x is that it must be implemented as a EXTENSION to the existing
ABIs in 6.x so that third party applications do not need to be
recompiled in timespan of the branch.

This first version will not have some of the bells and whistles that
will come with later versions. It will, for example, be limited to 16
tables in the first commit.
Implementation method, Compatible version. (part 1)
-------------------------------
For this reason I have implemented a "sufficient subset" of a
multiple routing table solution in Perforce, and back-ported it
to 6.x. (also in Perforce though not always caught up with what I
have done in -current/P4). The subset allows a number of FIBs
to be defined at compile time (8 is sufficient for my purposes in 6.x)
and implements the changes needed to allow IPV4 to use them. I have not
done the changes for ipv6 simply because I do not need it, and I do not
have enough knowledge of ipv6 (e.g. neighbor discovery) needed to do it.

Other protocol families are left untouched and should there be
users with proprietary protocol families, they should continue to work
and be oblivious to the existence of the extra FIBs.

To understand how this is done, one must know that the current FIB
code starts everything off with a single dimensional array of
pointers to FIB head structures (One per protocol family), each of
which in turn points to the trie of routes available to that family.

The basic change in the ABI compatible version of the change is to
extent that array to be a 2 dimensional array, so that
instead of protocol family X looking at rt_tables[X] for the
table it needs, it looks at rt_tables[Y][X] when for all
protocol families except ipv4 Y is always 0.
Code that is unaware of the change always just sees the first row
of the table, which of course looks just like the one dimensional
array that existed before.

The entry points rtrequest(), rtalloc(), rtalloc1(), rtalloc_ign()
are all maintained, but refer only to the first row of the array,
so that existing callers in proprietary protocols can continue to
do the "right thing".
Some new entry points are added, for the exclusive use of ipv4 code
called in_rtrequest(), in_rtalloc(), in_rtalloc1() and in_rtalloc_ign(),
which have an extra argument which refers the code to the correct row.

In addition, there are some new entry points (currently called
rtalloc_fib() and friends) that check the Address family being
looked up and call either rtalloc() (and friends) if the protocol
is not IPv4 forcing the action to row 0 or to the appropriate row
if it IS IPv4 (and that info is available). These are for calling
from code that is not specific to any particular protocol. The way
these are implemented would change in the non ABI preserving code
to be added later.

One feature of the first version of the code is that for ipv4,
the interface routes show up automatically on all the FIBs, so
that no matter what FIB you select you always have the basic
direct attached hosts available to you. (rtinit() does this
automatically).

You CAN delete an interface route from one FIB should you want
to but by default it's there. ARP information is also available
in each FIB. It's assumed that the same machine would have the
same MAC address, regardless of which FIB you are using to get
to it.

This brings us as to how the correct FIB is selected for an outgoing
IPV4 packet.

Firstly, all packets have a FIB associated with them. if nothing
has been done to change it, it will be FIB 0. The FIB is changed
in the following ways.

Packets fall into one of a number of classes.

1/ locally generated packets, coming from a socket/PCB.
Such packets select a FIB from a number associated with the
socket/PCB. This in turn is inherited from the process,
but can be changed by a socket option. The process in turn
inherits it on fork. I have written a utility call setfib
that acts a bit like nice..

setfib -3 ping target.example.com # will use fib 3 for ping.

It is an obvious extension to make it a property of a jail
but I have not done so. It can be achieved by combining the setfib and
jail commands.

2/ packets received on an interface for forwarding.
By default these packets would use table 0,
(or possibly a number settable in a sysctl(not yet)).
but prior to routing the firewall can inspect them (see below).
(possibly in the future you may be able to associate a FIB
with packets received on an interface.. An ifconfig arg, but not yet.)

3/ packets inspected by a packet classifier, which can arbitrarily
associate a fib with it on a packet by packet basis.
A fib assigned to a packet by a packet classifier
(such as ipfw) would over-ride a fib associated by
a more default source. (such as cases 1 or 2).

4/ a tcp listen socket associated with a fib will generate
accept sockets that are associated with that same fib.

5/ Packets generated in response to some other packet (e.g. reset
or icmp packets). These should use the FIB associated with the
packet being reponded to.

6/ Packets generated during encapsulation.
gif, tun and other tunnel interfaces will encapsulate using the FIB
that was in effect withthe proces that set up the tunnel.
thus setfib 1 ifconfig gif0 [tunnel instructions]
will set the fib for the tunnel to use to be fib 1.

Routing messages would be associated with their
process, and thus select one FIB or another.
messages from the kernel would be associated with the fib they
refer to and would only be received by a routing socket associated
with that fib. (not yet implemented)

In addition Netstat has been edited to be able to cope with the
fact that the array is now 2 dimensional. (It looks in system
memory using libkvm (!)). Old versions of netstat see only the first FIB.

In addition two sysctls are added to give:
a) the number of FIBs compiled in (active)
b) the default FIB of the calling process.

Early testing experience:
-------------------------

Basically our (IronPort's) appliance does this functionality already
using ipfw fwd but that method has some drawbacks.

For example,
It can't fully simulate a routing table because it can't influence the
socket's choice of local address when a connect() is done.

Testing during the generating of these changes has been
remarkably smooth so far. Multiple tables have co-existed
with no notable side effects, and packets have been routes
accordingly.

ipfw has grown 2 new keywords:

setfib N ip from anay to any
count ip from any to any fib N

In pf there seems to be a requirement to be able to give symbolic names to the
fibs but I do not have that capacity. I am not sure if it is required.

SCTP has interestingly enough built in support for this, called VRFs
in Cisco parlance. it will be interesting to see how that handles it
when it suddenly actually does something.

Where to next:
--------------------

After committing the ABI compatible version and MFCing it, I'd
like to proceed in a forward direction in -current. this will
result in some roto-tilling in the routing code.

Firstly: the current code's idea of having a separate tree per
protocol family, all of the same format, and pointed to by the
1 dimensional array is a bit silly. Especially when one considers that
there is code that makes assumptions about every protocol having the
same internal structures there. Some protocols don't WANT that
sort of structure. (for example the whole idea of a netmask is foreign
to appletalk). This needs to be made opaque to the external code.

My suggested first change is to add routing method pointers to the
'domain' structure, along with information pointing the data.
instead of having an array of pointers to uniform structures,
there would be an array pointing to the 'domain' structures
for each protocol address domain (protocol family),
and the methods this reached would be called. The methods would have
an argument that gives FIB number, but the protocol would be free
to ignore it.

When the ABI can be changed it raises the possibilty of the
addition of a fib entry into the "struct route". Currently,
the structure contains the sockaddr of the desination, and the resulting
fib entry. To make this work fully, one could add a fib number
so that given an address and a fib, one can find the third element, the
fib entry.

Interaction with the ARP layer/ LL layer would need to be
revisited as well. Qing Li has been working on this already.

This work was sponsored by Ironport Systems/Cisco

Reviewed by: several including rwatson, bz and mlair (parts each)
Obtained from: Ironport systems/Cisco

un-__P()

Clean up VCS Ids.

Space cleanup

Approved by: re (rwatson)

ANSIfy[1] plus some style cleanup nearby.

Discussed with: gnn, rwatson
Submitted by: Karl Sj?dahl - dunceor <dunceor gmail com> [1]
Approved by: re (rwatson)

MFp4: 92972, 98913 + one more change

In ip6_sprintf no longer use and return one of eight static buffers
for printing/logging ipv6 addresses.
The caller now has to hand in a sufficiently large buffer as first
argument.

With exception of the if_name() macro, all definitions in net_osdep.h
were unused or already in if_var.h so add if_name() to if_var.h and
remove net_osdep.h along with all references to it.

Longer term we may want to kill off if_name() entierly since all modern
BSDs have if_xname variables rendering it unnecessicary.

implements section 2.2 of RFC4191, regarding the reserved preference value (10)

Obtained from: KAME
MFC after: 1 day

sync with KAME regarding NDP

- introduced fine-grain-timer to manage ND-caches and IPv6 Multicast-Listeners
- supports Router-Preference <draft-ietf-ipv6-router-selection-07.txt>
- better prefix lifetime management
- more spec-comformant DAD advertisement
- updated RFC/internet-draft revisions

Obtained from: KAME
Reviewed by: ume, gnn
MFC after: 2 month

sync with KAME (nuked unused code, use NULL to denote a NULL pointer)

Obtained from: KAME
Reviewed by: ume, gnn

sync with KAME in the following points:
- fixed typos
- improved some comment descriptions
- use NULL, instead of 0, to denote a NULL pointer
- avoid embedding a magic number in the code
- use nd6log() instead of log() to record NDP-specific logs
- nuked an unnecessay white space

Obtained from: KAME
MFC after: 1 day

- fix typo in comment.
- nuke unused code.

Submitted by: suz
Obtained from: KAME

scope cleanup. with this change
- most of the kernel code will not care about the actual encoding of
scope zone IDs and won't touch "s6_addr16[1]" directly.
- similarly, most of the kernel code will not care about link-local
scoped addresses as a special case.
- scope boundary check will be stricter. For example, the current
*BSD code allows a packet with src=::1 and dst=(some global IPv6
address) to be sent outside of the node, if the application do:
s = socket(AF_INET6);
bind(s, "::1");
sendto(s, some_global_IPv6_addr);
This is clearly wrong, since ::1 is only meaningful within a single
node, but the current implementation of the *BSD kernel cannot
reject this attempt.

Submitted by: JINMEI Tatuya <jinmei__at__isl.rdc.toshiba.co.jp>
Obtained from: KAME

/* -> /*- for license, minor formatting changes, separate for KAME

Replace Bcopy/Bzero with 'the real thing' as in the rest of the file.

replace explicit changes to rt_refcnt by RT_ADDREF and RT_REMREF
macros that expand to include assertions when the system is built
with INVARIANTS

Supported by: FreeBSD Foundation

Switch Advanced Sockets API for IPv6 from RFC2292 to RFC3542
(aka RFC2292bis). Though I believe this commit doesn't break
backward compatibility againt existing binaries, it breaks
backward compatibility of API.
Now, the applications which use Advanced Sockets API such as
telnet, ping6, mld6query and traceroute6 use RFC3542 API.

Obtained from: KAME

correct linkmtu handling.

Obtained from: KAME

nuke duplicate function and unused function.

Obtained from: KAME

- add dom_if{attach,detach} framework.
- transition to use ifp->if_afdata.

Obtained from: KAME

- typo in comment
- style
- ANSIfy
(there is no functional change.)

Obtained from: KAME

return(code) -> return (code)
(reduce diffs against KAME)

Locking for updates to routing table entries. Each rtentry gets a mutex
that covers updates to the contents. Note this is separate from holding
a reference and/or locking the routing table itself.

Other/related changes:

o rtredirect loses the final parameter by which an rtentry reference
may be returned; this was never used and added unwarranted complexity
for locking.
o minor style cleanups to routing code (e.g. ansi-fy function decls)
o remove the logic to bump the refcnt on the parent of cloned routes,
we assume the parent will remain as long as the clone; doing this avoids
a circularity in locking during delete
o convert some timeouts to MPSAFE callouts

Notes:

1. rt_mtx in struct rtentry is guarded by #ifdef _KERNEL as user-level
applications cannot/do-no know about mutex's. Doing this requires
that the mutex be the last element in the structure. A better solution
is to introduce an externalized version of struct rtentry but this is
a major task because of the intertwining of rtentry and other data
structures that are visible to user applications.
2. There are known LOR's that are expected to go away with forthcoming
work to eliminate many held references. If not these will be resolved
prior to release.
3. ATM changes are untested.

Sponsored by: FreeBSD Foundation
Obtained from: BSD/OS (partly)

introduced a flag bit "ND6_IFF_ACCEPT_RTADV" in the nd_ifinfo structure to
control whether to accept RAs per-interface basis.
the new stuff ensures the backward compatibility;
- the kernel does not accept RAs on any interfaces by default.
- since the default value of the flag bit is on, the kernel accepts RAs
on all interfaces when net.inet6.ip6.accept_rtadv is 1.

Obtained from: KAME
MFC after: 1 week

made sure to keep the current stored lifetime when it was not updated
by an RA.
(a detailed description of this issue is found at the following URL.)
http://www.tahi.org/report/freebsd/freebsd48-rc2-20030316/host/lcna-stateless-addrconf/38.html

Reported by: Ozoe Nobumichi <ozoe@tahi.org>
through a periodic TAHI test
Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
Obtained from: KAME

Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.

If the caller of rtrequest*(RTM_DELETE, ...) asked for a copy of
the entry being removed (ret_nrt != NULL), increment the entry's
rt_refcnt like we do it for RTM_ADD and RTM_RESOLVE, rather than
messing around with 1->0 transitions for rtfree() all over.

SMP locking for radix nodes.

just merged cosmetic changes from KAME to ease sync between KAME and FreeBSD.
(based on freebsd4-snap-20020128)

Reviewed by: ume
MFC after: 1 week

o Move NTOHL() and associated macros into <sys/param.h>. These are
deprecated in favor of the POSIX-defined lowercase variants.
o Change all occurrences of NTOHL() and associated marcros in the
source tree to use the lowercase function variants.
o Add missing license bits to sparc64's <machine/endian.h>.
Approved by: jake
o Clean up <machine/endian.h> files.
o Remove unused __uint16_swap_uint32() from i386's <machine/endian.h>.
o Remove prototypes for non-existent bswapXX() functions.
o Include <machine/endian.h> in <arpa/inet.h> to define the
POSIX-required ntohl() family of functions.
o Do similar things to expose the ntohl() family in libstand, <netinet/in.h>,
and <sys/param.h>.
o Prepend underscores to the ntohl() family to help deal with
complexities associated with having MD (asm and inline) versions, and
having to prevent exposure of these functions in other headers that
happen to make use of endian-specific defines.
o Create weak aliases to the canonical function name to help deal with
third-party software forgetting to include an appropriate header.
o Remove some now unneeded pollution from <sys/types.h>.
o Add missing <arpa/inet.h> includes in userland.

Tested on: alpha, i386
Reviewed by: bde, jake, tmm

Wrap array accesses in macros, which also happen to be lvalues:

ifnet_addrs[i - 1] -> ifaddr_byindex(i)
ifindex2ifnet[i] -> ifnet_byindex(i)

This is intended to ease the conversion to SMPng.

call pfxlist_onlink_check() at the end of in6_tmpifadd(), to make sure
a temporary address generated from a detached public one also detached.

Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
Obtained from: KAME

Sync with recent KAME.
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.

TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.

Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks

backout ND6_USE_RTSOCK change in previous

avoid duplicated rtfree() on default router list change (could cause panic).
sync with kame 1.46 -> 1.47.

sync with kame tree as of july00. tons of bug fixes/improvements.

API changes:
- additional IPv6 ioctls
- IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8).
(also syntax change)

Remove unneeded #include <sys/kernel.h>

udp IPv6 support, IPv6/IPv4 tunneling support in kernel,
packet divert at kernel for IPv6/IPv4 translater daemon

This includes queue related patch submitted by jburkhol@home.com.

Submitted by: queue related patch from jburkhol@home.com
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project

KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP
for IPv6 yet)

With this patch, you can assigne IPv6 addr automatically, and can reply to
IPv6 ping.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project