MFC r349267:
Add "tcpmss" opcode to match the TCP MSS value.

With this opcode it is possible to match TCP packets with specified
MSS option, whose value corresponds to configured in opcode value.
It is allowed to specify single value, range of values, or array of
specific values or ranges. E.g.

# ipfw add deny log tcp from any to any tcpmss 0-500

MFC r345264:
Add NAT64 CLAT implementation as defined in RFC6877.

CLAT is customer-side translator that algorithmically translates 1:1
private IPv4 addresses to global IPv6 addresses, and vice versa.
It is implemented as part of ipfw_nat64 kernel module. When module
is loaded or compiled into the kernel, it registers "nat64clat" external
action. External action named instance can be created using `create`
command and then used in ipfw rules. The create command accepts two
IPv6 prefixes `plat_prefix` and `clat_prefix`. If plat_prefix is ommitted,
IPv6 NAT64 Well-Known prefix 64:ff9b::/96 will be used.

# ipfw nat64clat CLAT create clat_prefix SRC_PFX plat_prefix DST_PFX
# ipfw add nat64clat CLAT ip4 from IPv4_PFX to any out
# ipfw add nat64clat CLAT ip6 from DST_PFX to SRC_PFX in

Obtained from: Yandex LLC
Submitted by: Boris N. Lytochkin
Relnotes: yes
Sponsored by: Yandex LLC

MFC r341471:
Reimplement how net.inet.ip.fw.dyn_keep_states works.

Turning on of this feature allows to keep dynamic states when parent
rule is deleted. But it works only when the default rule is
"allow from any to any".

Now when rule with dynamic opcode is going to be deleted, and
net.inet.ip.fw.dyn_keep_states is enabled, existing states will reference
named objects corresponding to this rule, and also reference the rule.
And when ipfw_dyn_lookup_state() will find state for deleted parent rule,
it will return the pointer to the deleted rule, that is still valid.
This implementation doesn't support O_LIMIT_PARENT rules.

The refcnt field was added to struct ip_fw to keep reference, also
next pointer added to be able iterate rules and not damage the content
when deleted rules are chained.

Named objects are referenced only when states are going to be deleted to
be able reuse kidx of named objects when new parent rules will be
installed.

ipfw_dyn_get_count() function was modified and now it also looks into
dynamic states and constructs maps of existing named objects. This is
needed to correctly export orphaned states into userland.

ipfw_free_rule() was changed to be global, since now dynamic state can
free rule, when it is expired and references counters becomes 1.

External actions subsystem also modified, since external actions can be
deregisterd and instances can be destroyed. In these cases deleted rules,
that are referenced by orphaned states, must be modified to prevent access
to freed memory. ipfw_dyn_reset_eaction(), ipfw_reset_eaction_instance()
functions added for these purposes.

Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17532

MFC r341472:
Add ability to request listing and deleting only for dynamic states.

This can be useful, when net.inet.ip.fw.dyn_keep_states is enabled, but
after rules reloading some state must be deleted. Added new flag '-D'
for such purpose.

Retire '-e' flag, since there can not be expired states in the meaning
that this flag historically had.

Also add "verbose" mode for listing of dynamic states, it can be enabled
with '-v' flag and adds additional information to states list. This can
be useful for debugging.

Obtained from: Yandex LLC
Sponsored by: Yandex LLC

MFC r344018:
Remove `set' field from state structure and use set from parent rule.

Initially it was introduced because parent rule pointer could be freed,
and rule's information could become inaccessible. In r341471 this was
changed. And now we don't need this information, and also it can become
stale. E.g. rule can be moved from one set to another. This can lead
to parent's set and state's set will not match. In this case it is
possible that static rule will be freed, but dynamic state will not.
This can happen when `ipfw delete set N` command is used to delete
rules, that were moved to another set.
To fix the problem we will use the set number from parent rule.

Obtained from: Yandex LLC
Sponsored by: Yandex LLC

MFC r344870:
Fix the problem with O_LIMIT states introduced in r344018.

dyn_install_state() uses `rule` pointer when it creates state.
For O_LIMIT states this pointer actually is not struct ip_fw,
it is pointer to O_LIMIT_PARENT state, that keeps actual pointer
to ip_fw parent rule. Thus we need to cache rule id and number
before calling dyn_get_parent_state(), so we can use them later
when the `rule` pointer is overrided.

PR: 236292

MFC r340689:
Make multiline APPLY_MASK() macro to be function-like.

Reported by: cem

MFC r339539:
Add IPFW_RULE_JUSTOPTS flag, that is used by ipfw(8) to mark rule,
that was added using "new rule format". And then, when the kernel
returns rule with this flag, ipfw(8) can correctly show it.

Reported by: lev
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17373

MFC r336132:
Add "record-state", "set-limit" and "defer-action" rule options to ipfw.

"record-state" is similar to "keep-state", but it doesn't produce implicit
O_PROBE_STATE opcode in a rule. "set-limit" is like "limit", but it has the
same feature as "record-state", it is single opcode without implicit
O_PROBE_STATE opcode. "defer-action" is targeted to be used with dynamic
states. When rule with this opcode is matched, the rule's action will
not be executed, instead dynamic state will be created. And when this
state will be matched by "check-state", then rule action will be executed.
This allows create a more complicated rulesets.

Submitted by: lev

MFC r328988,r328989:
Rework ipfw dynamic states implementation to be lockless on fast path.

o added struct ipfw_dyn_info that keeps all needed for ipfw_chk and
for dynamic states implementation information;
o added DYN_LOOKUP_NEEDED() macro that can be used to determine the
need of new lookup of dynamic states;
o ipfw_dyn_rule now becomes obsolete. Currently it used to pass
information from kernel to userland only.
o IPv4 and IPv6 states now described by different structures
dyn_ipv4_state and dyn_ipv6_state;
o IPv6 scope zones support is added;
o ipfw(4) now depends from Concurrency Kit;
o states are linked with "entry" field using CK_SLIST. This allows
lockless lookup and protected by mutex modifications.
o the "expired" SLIST field is used for states expiring.
o struct dyn_data is used to keep generic information for both IPv4
and IPv6;
o struct dyn_parent is used to keep O_LIMIT_PARENT information;
o IPv4 and IPv6 states are stored in different hash tables;
o O_LIMIT_PARENT states now are kept separately from O_LIMIT and
O_KEEP_STATE states;
o per-cpu dyn_hp pointers are used to implement hazard pointers and they
prevent freeing states that are locklessly used by lookup threads;
o mutexes to protect modification of lists in hash tables now kept in
separate arrays. 65535 limit to maximum number of hash buckets now
removed.
o Separate lookup and install functions added for IPv4 and IPv6 states
and for parent states.
o By default now is used Jenkinks hash function.

Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D12685

MFC r326233:

Add to ipfw support for sending an SCTP packet containing an ABORT chunk.
This is similar to the TCP case. where a TCP RST segment can be sent.

There is one limitation: When sending an ABORT in response to an incoming
packet, it should be tested if there is no ABORT chunk in the received
packet. Currently, it is only checked if the first chunk is an ABORT
chunk to avoid parsing the whole packet, which could result in a DOS attack.

Thanks to Timo Voelker for helping me to test this patch.

MFC r327200:

When adding support for sending SCTP packets containing an ABORT chunk
to ipfw in https://svnweb.freebsd.org/changeset/base/326233,
a dependency on the SCTP stack was added to ipfw by accident.

This was noted by Kevel Bowling in https://reviews.freebsd.org/D13594
where also a solution was suggested. This patch is based on Kevin's
suggestion, but implements the required SCTP checksum computation
without any dependency on other SCTP sources.

While there, do some cleanups and improve comments.

Thanks to Kevin Kevin Bowling for reporting the issue and suggesting
a fix.

MFC r316434:
Add O_EXTERNAL_DATA opcode support.

This opcode can be used to attach some data to external action opcode.
And unlike to O_EXTERNAL_INSTANCE opcode, this opcode does not require
creating of named instance to pass configuration arguments to external
action handler. The data is coming just next to O_EXTERNAL_ACTION opcode.

The userlevel part currenly supports formatting for opcode with ipfw_insn
size, by default it expects u16 numeric value in the arg1.

Obtained from: Yandex LLC
Sponsored by: Yandex LLC

MFC r304041:
Move logging via BPF support into separate file.

* make interface cloner VNET-aware;
* simplify cloner code and use if_clone_simple();
* migrate LOGIF_LOCK() to rmlock;
* add ipfw_bpf_mtap2() function to pass mbuf to BPF;
* introduce new additional ipfwlog0 pseudo interface. It differs from
ipfw0 by DLT type used in bpfattach. This interface is intended to
used by ipfw modules to dump packets with additional info attached.
Currently pflog format is used. ipfw_bpf_mtap2() function uses second
argument to determine which interface use for dumping. If dlen is equal
to ETHER_HDR_LEN it uses old ipfw0 interface, if dlen is equal to
PFLOG_HDRLEN - ipfwlog0 will be used.

Obtained from: Yandex LLC
Sponsored by: Yandex LLC

MFC r304043:
Add three helper function to manage tables from external modules.

ipfw_objhash_lookup_table_kidx does lookup kernel index of table;
ipfw_ref_table/ipfw_unref_table takes and releases reference to table.

Obtained from: Yandex LLC
Sponsored by: Yandex LLC

MFC r304046, 304108:
Add ipfw_nat64 module that implements stateless and stateful NAT64.

The module works together with ipfw(4) and implemented as its external
action module.

Stateless NAT64 registers external action with name nat64stl. This
keyword should be used to create NAT64 instance and to address this
instance in rules. Stateless NAT64 uses two lookup tables with mapped
IPv4->IPv6 and IPv6->IPv4 addresses to perform translation.

A configuration of instance should looks like this:
1. Create lookup tables:
# ipfw table T46 create type addr valtype ipv6
# ipfw table T64 create type addr valtype ipv4
2. Fill T46 and T64 tables.
3. Add rule to allow neighbor solicitation and advertisement:
# ipfw add allow icmp6 from any to any icmp6types 135,136
4. Create NAT64 instance:
# ipfw nat64stl NAT create table4 T46 table6 T64
5. Add rules that matches the traffic:
# ipfw add nat64stl NAT ip from any to table(T46)
# ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96
6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
via NAT64 host.

Stateful NAT64 registers external action with name nat64lsn. The only
one option required to create nat64lsn instance - prefix4. It defines
the pool of IPv4 addresses used for translation.

A configuration of instance should looks like this:
1. Add rule to allow neighbor solicitation and advertisement:
# ipfw add allow icmp6 from any to any icmp6types 135,136
2. Create NAT64 instance:
# ipfw nat64lsn NAT create prefix4 A.B.C.D/28
3. Add rules that matches the traffic:
# ipfw add nat64lsn NAT ip from any to A.B.C.D/28
# ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96
4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
via NAT64 host.

Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6434

MFC r304048:
Replace __noinline with special debug macro NAT64NOINLINE.

MFC r304061:
Use %ju to print unsigned 64-bit value.

MFC r304076:
Make statistics nat64lsn, nat64stl an nptv6 output netstat-like:
"@value @description" and fix build due to -Wformat errors.

MFC r304378 (by bz):
Try to fix gcc compilation errors (which are right).
nat64_getlasthdr() returns an int, which can be -1 in case of error,
storing the result in an uint8_t and then comparing to < 0 is not
helpful. Do what is done in the rest of the code and make proto an
int here as well.

MFC r309187:
Fix ICMPv6 Time Exceeded error message translation.

MFC r314718:
Use new ipfw_lookup_table() in the nat64 too.

MFC r315204,315233:
Use memset with structure size.

MFC r303012:
Add ipfw_nptv6 module that implements Network Prefix Translation for IPv6
as defined in RFC 6296. The module works together with ipfw(4) and
implemented as its external action module. When it is loaded, it registers
as eaction and can be used in rules. The usage pattern is similar to
ipfw_nat(4). All matched by rule traffic goes to the NPT module.

Reviewed by: hrs
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6420

MFC r304049:
Add `stats reset` command implementation to NPTv6 module
to be able reset statistics counters.

Obtained from: Yandex LLC
Sponsored by: Yandex LLC

MFC r304076:
Make statistics nat64lsn, nat64stl an nptv6 output netstat-like:
"@value @description" and fix build due to -Wformat errors.

MFC r314507:
Fix NPTv6 rule counters when one_pass is not enabled.

Consider the rule matching when both @done and @retval values
returned from ipfw_run_eaction() are zero. And modify ipfw_nptv6()
to return IP_FW_DENY and @done=0 when addresses do not match.

Obtained from: Yandex LLC
Sponsored by: Yandex LLC

MFC r303018:
Add named dynamic states support to ipfw(4).

The keep-state, limit and check-state now will have additional argument
flowname. This flowname will be assigned to dynamic rule by keep-state
or limit opcode. And then can be matched by check-state opcode or
O_PROBE_STATE internal opcode. To reduce possible breakage and to maximize
compatibility with old rulesets default flowname introduced.
It will be assigned to the rules when user has omitted state name in
keep-state and check-state opcodes. Also if name is ambiguous (can be
evaluated as rule opcode) it will be replaced to default.

Reviewed by: julian
Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6674

MFC r304087:
Do not warn about ambiguous state name when we inspect a comment token.

MFC r304089:
Add an ability to attach comment to check-state rules.

MFC r310727 (by marius):
Fix a bug in r272840; given that the optlen parameter of setsockopt(2)
is a 32-bit socklen_t, do_get3() passes the kernel to access the wrong
32-bit half on big-endian LP64 machines when simply casting the 64-bit
size_t optlen to a socklen_t pointer.
While at it and given that the intention of do_get3() apparently is to
hide/wrap the fact that socket options are used for communication with
ipfw(4), change the optlen parameter of do_set3() to be of type size_t
and as such more appropriate than uintptr_t, too.

MFC r315305:
Change the syntax of ipfw's named states.

Since the state name is an optional argument, it often can conflict
with other options. To avoid ambiguity now the state name must be
prefixed with a colon.

Sponsored by: Yandex LLC

MFC r303955:
Restore "nat global" support.

Now zero value of arg1 used to specify "tablearg", use the old "tablearg"
value for "nat global". Introduce new macro IP_FW_NAT44_GLOBAL to replace
hardcoded magic number to specify "nat global". Also replace 65535 magic
number with corresponding macro. Fix typo in comments.

PR: 211256