MFC r345754:
run(4): properly set F_DATAPAD radiotap flag if frame has padding between
frame header and data.

This will fix 'Mysterious OLPC stuff' for received frames and wrong
CCMP / TKIP / data decoding for transmitted frames in net/wireshark
dissector.

While here, drop unneeded comment - net80211 handles padding requirements
for Tx & Rx without driver adjustment.

Was tested with D-Link DWA-140 rev B3, STA mode.

MFC r345753:
run(4): do not clear PROTECTED bit if frame was not decrypted by NIC.

Was tested with D-Link DWA-140 rev B3, STA / MONITOR modes.

MFC r345493:
run(4): merge some common TSF-related code into run_disable_tsf()

No functional change intended.

MFC r344990:
Fix ieee80211_radiotap(9) usage in wireless drivers:

- Alignment issues:
* Add missing __packed attributes + padding across all drivers; in
most places there was an assumption that padding will be always
minimally suitable; in few places - e.g., in urtw(4) / rtwn(4) -
padding was just missing.
* Add __aligned(8) attribute for all Rx radiotap headers since they can
contain 64-bit TSF timestamp; it cannot appear in Tx radiotap headers, so
just drop the attribute here. Refresh ieee80211_radiotap(9) man page
accordingly.

- Since net80211 automatically updates channel frequency / flags in
ieee80211_radiotap_chan_change() drop duplicate setup for these fields
in drivers.

MFC r306049:
net80211: remove IEEE80211_RADIOTAP_TSFT field from transmit definitions.

This field may be used for received frames only.

MFC r343990:
net80211: hide casts for 'i_seq' field offset calculation inside
ieee80211_getqos() and reuse it in various places.

MFC r343474:
Remove 2GHz channel list copies from wireless drivers.

Wrap ieee80211_add_channel_list_2ghz into another function
which supplies default (1-14) channel list to it and drop
its copies from drivers.

MFC r343681:
run(4): fix allocated memory type for ieee80211_node(4)

PR: 177366

MFC r343541:
Drop some unneeded includes from wireless USB drivers.

MFC r343234:
run(4): add more length checks in Rx path.

- Discard frames that are bigger than MCLBYTES (to prevent buffer overrun).
- Check buffer length before accessing its contents.
- Fix len <-> dmalen check - the last includes Rx Wireless information
structure size.
- Fix out-of-bounds read during Rx node search for ACK / CTS frames
(monitor mode only).

While here:
- Mark few suspicious places with comments.
- Move common cleanup to the function end.

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

[run] fix TSF locking in RX radiotap.

Submitted by: Imre Vadasz <imre@vdsz.com>

run: switch to ieee80211_add_channel_list_*()

- Use device's channel list instead of default one (from
ieee80211_init_channels()).
- Add ic_getradiocaps() method.

Differential Revision: https://reviews.freebsd.org/D6144

dev/usb: unsigned some loop indexes.

Although usually small, values produced by nitems() are unsigned.
By unsigning the corresponding indexes we avoid signed vs unsigned
comparisons. This may have some effect on performance, although given the
small sizes the effect will not be perceivable, and it makes the code
clearer.

Respect the style of the changed files: one uses u_int while the other
uses "unsigned int".

Reviewed by: hselasky

dev/usb: minor spelling fixes in comments.

No functional change.

Reviewed by: hselasky

net80211 + drivers: hide size of 'bands' array behind a macro.

Auto-replace 'howmany(IEEE80211_MODE_MAX, 8)' with 'IEEE80211_MODE_BYTES'.
No functional changes.

zyd, run, ural: do not corrupt MAC address

Do not use ic_macaddr as a storage for current BSSID;
it may be reused in vap creation procedure;
similar to r288619.

Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5513

net80211 drivers: fix ieee80211_init_channels() usage

Fix out-of-bounds read (all) / write (11n capable) for drivers
that are using ieee80211_init_channels() to initialize channel list.

Tested with:
* RTL8188EU, STA mode.
* RTL8188CUS, STA mode.
* WUSB54GC, HOSTAP mode.

Approved by: adrian (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4818

net80211: remove hardcoded slot time durations from drivers

- Add IEEE80211_GET_SLOTTIME(ic) macro.
- Use predefined macroses to set slot time.

Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4044

Create a USB_PNP_INFO and use it to export the existing PNP
tables. Some drivers needed some slight re-arrangement of declarations
to accommodate this. Change the USB pnp tables slightly to allow
better compatibility with the system by moving linux driver info from
start of each entry to the end. All other PNP tables in the system
have the per-device flags and such at the end of the elements rather
that at the beginning.

Differential Review: https://reviews.freebsd.org/D3458

net80211: WME callback cleanup in various drivers

Since r288350, ic_wme_task() is called via ieee80211_runtask(),
so, any additional deferring from the driver side is not needed.

Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4072

run(4): convert to ieee80211_tx_complete()

Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D3992

Initialize radiotap header fields before calling ieee80211_radiotap_rx()

Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D3951

net80211: move ieee80211_free_node() call on error from ic_raw_xmit() to ieee80211_raw_output().

This doesn't free the mbuf upon error; the driver ic_raw_xmit method is still
doing that.

Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3774

Recognise the Netgear WNDA4100 (N900) 3x3 device in run(4).

Fix max TX power settings for RT5390/RT5392.
While here remove wrong definition of RT2860_USB_PHY_MAN_RST.

Fix run(4) mbuf queue flushing / freeing.

Ensure things are freed during interface stop, or start may end up never
being able to transmit a full queue.

Fix to compile using gcc-4.2 (eg mips, sparc64.)

run(4): fix WME support (untested).

Now run(4) fetches parameters from ic->ic_wme.wme_params array, which is never initialized
(and can be safely removed). This patch replaces &ic->ic_wme.wme_params with
&ic->ic_wme.wme_chanParams.cap_wmeParams (contains parameters for local station;
used by other drivers with WME support).

Tested:

* me: STA: run0: MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), address 38:83:45:11:78:ae

net80211: drop ieee80211_beacon_offsets parameter from ieee80211_beacon_alloc() and ieee80211_beacon_update()

Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3659

net80211: drop redundant 3rd parameter from iv_key_set().

The MAC can be fetched from the key struct.

I added the ndis updates to make it compile.

Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3657

run(4): Add initial support for IBSS merge.

Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3592

net80211: include one copy of struct ieee80211_beacon_offsets into ieee80211vap

Submitted by: Andriy Voskoboinyk <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3658

Fix a debug message which didn't quite get it right about eeprom version.

Enable TSF timer in monitor mode.

Tested on RT5370, sta mode.
Submitted by: Andriy Voskoboinyk <s3erios at gmail com>
Differential Revision: https://reviews.freebsd.org/D3591

Add TSF field into TX/RX radiotap headers

Tested on RT5370, sta mode.
Submitted by: Andriy Voskoboinyk <s3erios at gmail com>
Differential Revision: https://reviews.freebsd.org/D3590

Fix comparison in run_key_set_cb().

Tested on RT5370, sta mode.

Submitted by: Andriy Voskoboinyk <s3erios at gmail com>
Differential Revision: https://reviews.freebsd.org/D3589

- Remove empty key_update_* functions.
- Hide "struct ieee80211_node *" -> "struct run_node *" casting behind
RUN_NODE() macro.
- Simplify IEEE80211_HAS_ADDR4 macro definition
- Fix a comment (desn't -> doesn't)

Submitted by: Andriy Voskoboinyk <s3erios at gmail com>
Differential Revision: https://reviews.freebsd.org/D3588

Replay r286410. Change KPI of how device drivers that provide wireless
connectivity interact with the net80211 stack.

Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.

Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:

- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
driver about any changes: number of wlan(4) interfaces, number of them
in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
driver experiences errors and can not attribute them to any specific
interface, driver updates ic_oerrors or ic_ierrors counters.

Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
now provided by net.wlan.devices sysctl.

Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann,
Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in
testing.

Reviewed by: adrian
Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Further conversions from ifp->if_softc -> ic_softc.

Revert the wifi ifnet changes until things are more baked and tested.

* 286410
* 286413
* 286416

The initial commit broke a variety of debug and features that aren't
in the GENERIC kernels but are enabled in other platforms.

Change KPI of how device drivers that provide wireless connectivity interact
with the net80211 stack.

Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.

Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:

- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
driver about any changes: number of wlan(4) interfaces, number of them
in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
driver experiences errors and can not attribute them to any specific
interface, driver updates ic_oerrors or ic_ierrors counters.

Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
now provided by net.wlan.devices sysctl.

Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to Olivier Cochard, gjb@, mmoll@,
op@ and lev@, who also participated in testing. Details here:

https://wiki.freebsd.org/projects/ifnet/net80211

Still, drivers: ndis, wtap, mwl, ipw, bwn, wi, upgt, uath were not
tested. Changes to mwl, ipw, bwn, wi, upgt are trivial and chances
of problems are low. The wtap wasn't compilable even before this change.
But the ndis driver is complex, and it is likely to be broken with this
commit. Help with testing and debugging it is appreciated.

Differential Revision: D2655, D2740
Sponsored by: Nginx, Inc.
Sponsored by: Netflix

Change three methods in struct ieee80211com, namely ic_updateslot,
ic_update_mcast and ic_update_promisc, to pass pointer to the ieee80211com,
not to the ifnet.

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Set ic_softc in all 802.11 drivers. Not required right now, but will be
used quite soon.

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Make net80211 drivers supply their device name to the net80211 layer, so
that the latter doesn't need to go through struct ifnet to get their name.

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Add new USB ID.

PR: 199522

Make a bunch of USB debug SYSCTLs tunable, so that their value(s) can
be set before the USB device(s) are probed.

Fix the kernel panic in hostap mode.
rvp->beacon_mbuf was NULL in run_update_beacon().

PR: 189405
Submitted by: Gabor Simon <gabor.simon75 at gmail.com>
MFC after: 3 days

Mechanically convert to if_inc_counter().

Fix typo: s/mac_rev/mac_ver/

Submitted by: Stefan Sperling <stsp at openbsd dot org>

If eapol packets are sent at the lowest rate, key negotiation will
become more reliable.

Submitted by: Akinori Furukoshi <moonlightakkiy at yahoo dot ca>

Remove D-Link DWA140 rev D1 by accident.

Pointed out by Anders Larsson in private email.

Add new USB ID.

Submitted by: Tuomo Latto <djv+fbpr@iki.fi>
PR: usb/188046
MFC after: 1 week

- Temporary fix for race in RUN driver which can
cause freed memory to be accessed.
- Properly lock callout_reset()'s.

MFC after: 1 week

Add a flag to run's device list which uses a standard scsi eject.
The flag indicates that the mcu doesn't need to load firmware.

Tested by: Alex Deiter <alex dot deiter at gmail.com>, myself
Tested on: ASUS USB-N66

Fix a range check for maximum transmit length. The existing code was
off by 4 bytes in one case.

Approved by: kevlo @
MFC after: 2 weeks

Fix comment.

Get rid of memmove(). It's not portable.

Tested on RT3071, RT3573, RT3570, RT3572, and RT5572.

Reviewed by: hselasky

Revert r261014. Let Kevin fix it.

MFC after: 1 week

- Fix some non-portable code with regard to endianness. Don't use memmove().
- Fix a range check for maximum transmit length.
- Fix read from missing field when transmitting data.

MFC after: 2 weeks

Fix a logic error when checking if Tx power entries are greater than 31.

Rename definition of IEEE80211_FC1_WEP to IEEE80211_FC1_PROTECTED.

The origin of WEP comes from IEEE Std 802.11-1997 where it defines
whether the frame body of MAC frame has been encrypted using WEP
algorithm or not.
IEEE Std. 802.11-2007 changes WEP to Protected Frame, indicates
whether the frame is protected by a cryptographic encapsulation
algorithm.

Reviewed by: adrian, rpaulo

Add support for the MediaTek/Ralink RT3593 chipset.
Committed over the ZyXEL NWD2705 on amd64 with WPA.

Add D-Link DWA-140 rev D1, another RT5372/run(4).
From Anton Mazunin.

Some devices have a dual mode such as Tenda W326U and ZyXEL NWD2705,
add the product id and use a standard scsi eject.

Tested on the ZyXEL NWD2705 wlan dongle.

Use 'val' instead of 'val & 0xff' since the last argument of run_bbp_write()
is uint8_t.

Spotted by: yongari

Fix style: add tab after #define.

Fix typo in comment.

Add support to IQ calibration.

Fix compilation when the "USB_DEBUG" option is set.

Add support for the MediaTek/Ralink RT5572 chipset.
Committed over the TP-LINK TL-WDN3200 (RT5572) on amd64 with WPA.

While here, add my copyright.

Replace the magic numbers with something more readable.

Cosmetic changes.

Remove daft KASSERT.

Fix what looks like a typo after r258732.

Fix external compiler warning(s). Avoid pointer dereferencing.

The RUN_MAX_TXSZ constat is defined as Tx desc + Tx wireless info + MCLBYTES +
max padding. We were lucky in that run(4) working fine since both
rt2860_rxwi and rt2860_txwi structure sizes are the same.

Change run_rt2870_rf_write() prototype (no functional change)

On the RT2870, rf registers are now 64-bit, not 32-bit after r257955.
Committed over a Buffalo WLI-UC-AG300N (RT2870).

Style changes.

Add missing static keyword.

MFC after: 2 weeks

- Use bit twiddling macro to set IEEE80211_MODE_11A
- On the RT3572 chipset, there's no need to configure BBP register 86

Remove r257748 by accident.

Add support for the MediaTek/Ralink RT5370/RT5372 chipset.

Tested with the TP-Link TL-WN727N (RT5370) and the D-Link DWA-140 (RT5372)
on i386/amd64/arm with WPA.

Implement a working write region function to speed up loading of the
firmware. You can test this change by switching the "#if 1" statement
right above in the patched code to "#if 0" !

MFC after: 1 week

Check for "ieee80211_vap_setup()" failure in all USB WLAN drivers.

MFC after: 1 week

Reading the RT2860_ASIC_VER_ID register is not needed and returns
completely bogus value.

Protect the "ratectl_ch" callout in the "run" driver by the "run"
softc's "sc->sc_mtx" mutex. Currently the callout was marked
multi-processor safe, which is fine, but it is better to
start/stop/reset callouts while holding the "run" drivers own
mutex. While at it add a missing "ULL" at end of the 64-bit unsigned
integer constant.

MFC after: 1 week

Fix a potential memory leak.

MFC after: 1 week

Fix some types. Compilation for external target complains that "u_int"
is not idential to "uint32_t" when defining set channel prototype
functions. The WLAN channel range should be from 0 to 65535
inclusivly, and u_int should be fine for this purpose.

Enable DC filter in RT3071 Version E.

The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by: Netflix
Sponsored by: Nginx, Inc.

Fix the RT2860_TX_SW_CFG2 init value on older revisions of RT3070 chip.

Correct tx mixer gain value for RT3070 and RT3071.

Correctly value in EEPROM/EFUSE is one or more for RT3070 and
two or more for other RT3071 chips.

Since the DAC issue has been fixed in RT3070(F), the voltage raising fix
is no longer needed.

Fix lower bits of RF_R3 for RT3370 and newer. This change doesn't affect
older chipsets.

Add new USB ID.

PR: usb/182936
Submitted by: Keith White <kwhite@site.uottawa.ca>
MFC after: 1 week

Add support for DLINK DWA-127 Wireless Adapter

Approved by: cognet (mentor)

Add new USB ID.

PR: usb/177013
MFC after: 1 week

- Streamline detach logic in wlan drivers, so that
freed memory cannot be used during detach.
- Remove all panic() calls from the urtw driver because
panic() is not appropriate here.
- Remove redundant checks for device detached in
device detach callbacks.
- Use DEVMETHOD_END to mark end of device methods.

MFC after: 2 weeks

Fix for "run0: wcid=xx out of range" error message.

MFC after: 1 week
PR: usb/174963
Submitted by: PseudoCylon <moonlightakkiy@yahoo.ca>

Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags in sys/dev.

Add new USB device ID.

PR: usb/170688
MFC after: 1 week

- Add support of the following USB devices to run(4):

* Logitec LAN-W150N/U2
* Buffalo WLI-UC-GNM2

- Add device id of Planex GW-USValue-EZ.

Add appropriate checks for ic_bsschan being set to IEEE80211_CHAN_ANYC in
some of the USB WLAN drivers. This fixes a panic when using monitor mode.

MFC after: 1 week
Submitted by: PseudoCylon

Fix compiler warnings, mostly signed issues,
when USB modules are compiled with WARNS=9.

MFC after: 1 weeks

Load the firmware during init not attach, as a root filesystem might
not yet be available. While here, also print the firmware version.

Submitted by: PseudoCylon
MFC after: 3 days

Add support for new USB device.

PR: usb/164275
MFC after: 3 days

Fix some net80211 enum nits:
- ic_vap_create() uses an ieee80211_opmode argument
- ieee80211_rate2media() takes an ieee80211_phymode argument
- ieee80211_plcp2rate() takes an ieee80211_phytype argument
- cast to enum ieee80211_protmode and ieee80211_roamingmode to silence
compiler warnings

Submitted by: arundel@

Improve fix for random USB transfer time out.

Suggested by: YougHyeon
MFC after: 3 days

Fix for random USB transfer time out.

Submitted by: PseudoCylon
MFC after: 3 days

Add new USB IDs to RUN driver.

PR: usb/162712
MFC after: 1 week

Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.

The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.

Add new USB IDs to RUN driver. Update usb.conf.

PR: usb/161798
MFC after: 3 days

- Move all USB device ID arrays into so-called sections,
sorted according to the mode which they support:
host, device or dual mode
- Add generic tool to extract these data:
tools/bus_autoconf

Discussed with: imp
Suggested by: Robert Millan <rmh@debian.org>
PR: misc/157903
MFC after: 14 days

- Minor style(9) cleanup
- Make functions static

Add the Buffalo (Melco Inc.) WLI-UC-G301N

PR: usb/155229
Submitted by: Yoshiaki UCHIKAWA
MFC after: 1 week

* Fix page fault caused by referring freed node.

While updating Tx stats, already freed node could be referred and cause
page fault. To avoid such panic, spool Tx stats in driver's softc. Then,
on every ratectl interval, grab node though ieee80211_iterate_nodes() and
update ratectl stats.

* Simplify some code in run_iter_func().

* Fix typo

* Use memset instead of bzero (hselasky @)

PR: kern/153938
Submitted by: PseudoCylon <moonlightakkiy@yahoo.ca>
Approved by: thompsa (mentor)

Rework beacon handling re-enable run_updateslot().

Drivers which rely on net80211 to create the beacon need to call
ieee80211_beacon_update() on iv_update_beacon() calls. This is required
that certain bits, e.g. TIM, get updated. A call to ieee80211_beacon_alloc()
is not enough because it does not care about flags which can only change
during runtime. By design a beacon is supposed to be allocated only once
while moving into RUN state.

To handle all possible calls to iv_update_beacon() the run_updateslot()
function has been revived and run_updateprot() has been added.
run_updateslot() handles slot time changes and run_updateprot() changes
to protection, both can change while nodes associate/leave.

Submitted by: Alexander Zagrebin <alex at zagrebin.ru>,
PseudoCylon <moonlightakkiy atyahoo.ca>
MFC after: 3 weeks

Pull ieee80211_ratectl_node_init() calls from drivers into net80211.
This fixes hostap mode for at least ral(4) and run(4), because there is
no sufficient call into drivers which could be used initialize the node
related ratectl variables.

MFC after: 3 days

Instead of using the AMRR ratectl algo as default for drivers which have
the IEEE80211_C_RATECTL flag set, default to NONE for all drivers. Only if
a driver calls ieee80211_ratectl_init() check if the NONE algo is still
selected and try to use AMRR in that case. Drivers are still free to use
any other algo by calling ieee80211_ratectl_set() prior to the
ieee80211_ratectl_init() call.

After this change it is now safe to assume that a ratectl algo is always
available and selected, which renders the IEEE80211_C_RATECTL flag pretty
much useless. Therefore revert r211314 and 211546.

Reviewed by: rpaulo
MFC after: 2 weeks

We need to grab a node reference count to vap->iv_bss before using it as it is
possible for the node to be replaced and freed at any time by
ieee80211_sta_join1().

Add missing MODULE_VERSION() definitions, this resolves problems around
duplicate module loads.

PR: usb/125736
Submitted by: danger, mm
Reviewed by: hselasky

Introduce IEEE80211_C_RATECTL, drivers which use the ratectl framework
should set this capability.

MFC after: 2 weeks

Use more compact deviceid table.

Submitted by: Akinori Furukoshi

Update for style(9).

Submitted by: Akinori Furukoshi (author)

Fix typos that broke duration calculations on protection frames. A similar
fix was done for ral(4) long ago and it must be copy-and-paste bugs.

Found by: clang

- Because hostapd calls iv_key_set() before if_init(), make sure key_set
callback function will be executed, and that the key won't be deleted during
the init process.
- txmic and rxmic are written into the chip the same place regardless of
opmode.
- Make the hardware generate 802.11 sequence numbers.

Submitted by: Akinori Furukoshi
Obtained from: git://gitorious.org/run/run.git

Sync run(4) driver from author's site.

Submitted by: Akinori Furukoshi
Obtained from: git://gitorious.org/run/run.git

Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after: 1 month

Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had
the illusion of a tunable setting but was always turned on regardless.

MFC after: 1 week

Remove previously added if 0's.

MFC after: 1 month

net80211 rate control framework (net80211 ratectl).

This framework allows drivers to abstract the rate control algorithm and
just feed the framework with the usable parameters. The rate control
framework will now deal with passing the parameters to the selected
algorithm. Right now we have AMRR (the default) and RSSADAPT but there's
no way to select one with ifconfig, yet.
The objective is to have more rate control algorithms in the net80211
stack so all drivers[0] can use it. Ideally, we'll have the well-known
sample rate control algorithm in the net80211 at some point so all
drivers can use it (not just ath).

[0] all drivers that do rate control in software, that is.

Reviewed by: bschmidt, thompsa, weyongo
MFC after: 1 months

- Integrate latest driver code from OpenBSD
- Drain our tasks from the ieee80211 taskqueue
- Add more IDs

Submitted by: Akinori Furukoshi

Use device_printf rather than printf + device_get_nameunit.

Release the firmware after loading to the device.

Add run(4), a driver for Ralink RT2700U/RT2800U/RT3000U USB 802.11agn devices.

This driver was written for OpenBSD by Damien Bergamini and ported over by
Akinori Furukoshi.