MFC r352555:
Increase the maximum user-space buffer size from 256kBytes to 32MBytes for
libusb. This is useful for speeding up large data transfers while reducing
the interrupt rate.

Found at: EuroBSDcon 2019
Sponsored by: Mellanox Technologies

Revert r330897:

This was intended to be a non-functional change. It wasn't. The commit
message was thus wrong. In addition it broke arm, and merged crypto
related code.

Revert with prejudice.

This revert skips files touched in r316370 since that commit was since
MFCed. This revert also skips files that require $FreeBSD$ property
changes.

Thank you to those who helped me get out of this mess including but not
limited to gonzo, kevans, rgrimes.

Requested by: gjb (re)

Partial merge of the SPDX changes

These changes are incomplete but are making it difficult
to determine what other changes can/should be merged.

No objections from: pfg

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Add USB MIDI template for USB device side mode.

Add usb template SERIALNET allowing us to have both USB CDC Ethernet
and USB CDC Modem same time by single cable.

Reviewed by: hselasky@

Add new USB phone descriptor template for USB device side mode.

MFC after: 3 days

- Try to fix build of 32-bit compatibility USB support for FreeBSD and
Linux targets without breaking the existing IOCTL API.

- Remove some not-needed header file inclusions.

- Wrap a long line.

MFC after: 1 week
Reported by: Damjan Jovanovic <damjan.jov@gmail.com>

Add new USB API to get the port path of a USB device.

MFC after: 2 weeks
Requested by: emaste @

Add USB API to read power draw on USB devices.
Update usbconfig to print power draw on USB devices.

MFC after: 2 weeks
Submitted by: Matt Burke @ icritical.com

Modify the FreeBSD USB kernel code so that it can be compiled directly
into the FreeBSD boot loader, typically for non-USB aware BIOSes, EFI systems
or embedded platforms. This is also useful for out of the system compilation
of the FreeBSD USB stack for various purposes. The USB kernel files can
now optionally include a global header file which should include all needed
definitions required to compile the FreeBSD USB stack. When the global USB
header file is included, no other USB header files will be included by
default.

Add new file containing the USB stack configuration for the
FreeBSD loader build.

Replace some __FBSDID()'s by /* $FreeBSD$ */ comments. Now all
USB files follow the same style.

Use cases:
- console in loader via USB
- loading kernel via USB

Discussed with: Hiroki Sato, hrs @ EuroBSDCon

Rename new IOCTL to singular form of the noun "streams".

MFC after: 2 weeks

Add support for the so-called streams feature of BULK endpoints
in SUPER-speed mode, USB 3.0.

This feature has not been tested yet, due to lack of hardware.

This feature is useful when implementing protocols like UASP,
USB attached SCSI which promises higher USB mass storage throughput.

This patch also implements support for hardware processing of endpoints
for increased performance. The switching to hardware processing
of an endpoint is done via a callback to the USB controller driver. The
stream feature is implemented like a variant of a hardware USB protocol.

USB controller drivers implementing device mode needs to be updated to
implement the new "xfer_stall" USB controller method and remove the
"xfer" argument from the "set_stall" method.

The API's toward existing USB drivers are preserved. To setup a USB transfer
in stream mode, set the "stream_id" field of the USB config structure to
the desired value.

The maximum number of BULK streams is currently hardcoded and limited to 8
via a define in usb_freebsd.h.

All USB drivers should be re-compiled after this change.

LibUSB will be updated next week to support streams mode. A new IOCTL to
setup BULK streams as already been implemented. The ugen device nodes
currently only supports stream ID zero.

The FreeBSD version has been bumped.

MFC after: 2 weeks

- This patch adds custom IOCTLs to read and write the 4 GPIO pins on the
cp2103 usb-to-serial chip.
- This patch also makes the line status polling asynchronous, to reduce
the time needed to change the GPIO pins.

Submitted by: JD Louw
MFC after: 1 week

- Add more USB templates for various USB device classes
- Add basic template support for USB 3.0
- Export definition of template sysctl numbers through usb_ioctl.h

MFC after: 7 days

- Add support for software pre-scaling of ISOCHRONOUS transfers.

MFC after: 14 days
Approved by: thompsa (mentor)

- Add support for LibUSB in 32-bit compatibility mode.

Approved by: thompsa (mentor)

Purge mergeinfo from files that were temporarily renamed while USB2 was
imported into the tree alongside USB.

Approved by: re (mergeinfo blanket)

- Make struct usb_xfer opaque so that drivers can not access the internals
- Reduce the number of headers needed for a usb driver, the common case is just usb.h and usbdi.h

Fix _USB2_* refernces in the header protection defines.

s/usb2_/usb_/ on all C structs for the USB stack.

Remove pointeless mergeinfo that crept in from r190633.

Implement an ipfw action to reassemble ip packets: reass.

Integrate user/mav/ata branch:

Add ch_suspend/ch_resume methods for PCI controllers and implement them
for AHCI. Refactor AHCI channel initialization according to it.

Fix Port Multipliers operation. It is far from perfect yet, but works now.
Tested with JMicron JMB363 AHCI + SiI 3726 PMP pair.
Previous version was also tested with SiI 4726 PMP.

Hardware sponsored by: Vitsch Electronics / VEHosting.nl

Change USB over to make_dev() for all device nodes, previously it hooked into
the devfs clone handler to open the (invisible) devices on the fly.

The /dev entries are layed out as follows,

/dev/usbctl = master device
/dev/usb/0.1.0.5 = usb device, (<bus>.<dev>.<iface>.<endpoint>)
/dev/ugen0.1 -> usb/0.1.0.0 = ugen link to ctrl endpoint

This also removes the custom permissions model from USB. Bump
__FreeBSD_version to 800066.

Submitted by: rink (earlier version)

MFp4 //depot/projects/usb@157974

Add support for setting and getting the USB template value through libusb20 and
usbconfig.

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb@157853

Clean up old way of polling the USB hardware. The existing polling support was
a bit hackish.

Submitted by: Hans Petter Selasky

Move the new USB stack into its new home.

MFp4 //depot/projects/usb@157699

Add two new functions to the libusb20 API and required kernel ioctls.

- libusb20_dev_get_iface_desc
- libusb20_dev_get_info

New command to usbconfig, "show_ifdrv", which will print out the kernel driver
attached to the given USB device aswell.

See "man libusb20" for a detailed description.

Some minor style corrections long-line wrapping.

Submitted by: Hans Petter Selasky

Fix up USB_GET_REPORT_DESC ioctl.

Submitted by: daichi

Sync with usb4bsd:

src/lib/libusb20/libusb20_desc.c

Make "libusb20_desc_foreach()" more readable.

src/sys/dev/usb2/controller/*.[ch]
src/sys/dev/usb2/core/*.[ch]

Implement support for USB power save for all HC's.

Implement support for Big-endian EHCI.

Move Huawei quirks back into "u3g" driver.

Improve device enumeration.

src/sys/dev/usb2/ethernet/*[ch]

Patches for supporting new AXE Gigabit chipset.

src/sys/dev/usb2/serial/*[ch]

Fix IOCTL return code.

src/sys/dev/usb2/wlan/*[ch]

Sync with old USB stack.

Submitted by: hps

src/sys/dev/usb2/controller/uss820dci_pccard.c
src/sys/dev/usb2/core/usbdevs
src/sys/dev/usb2/include/urio2_ioctl.h
src/sys/dev/usb2/storage/ustorage2_fs.h

These files are not used any more.

src/usr.sbin/Makefile
src/etc/mtree/BSD.include.dist
src/include/Makefile
src/lib/Makefile
src/share/man/man7/hier.7
src/share/mk/bsd.libnames.mk
src/etc/mtree/BSD.include.dist

Make "usbconfig" and "libusb20" a part of the default build.

src/sys/dev/usb/rio500_usb.h
src/sys/dev/usb2/storage/urio2.c

Use common include file.

src/sys/dev/usb2/bluetooth/ng_ubt2.c

Make USB bluetooth depend on "ng_hci" module.

src/sys/dev/usb2/controller/ehci2.c
src/sys/dev/usb2/controller/ehci2.h

Patches for Marvell EHCI.

src/sys/dev/usb2/core/usb2_busdma.c

Bugfix for 64-bit platforms. Need to unload the previously loaded DMA
map and some cleanup regarding some corner cases.

src/sys/dev/usb2/core/usb2_core.h
src/sys/dev/usb2/core/usb2_dev.c
src/sys/dev/usb2/core/usb2_dev.h

Bugfix for libusb filesystem interface.

New feature: Add support for filtering device data at the expense of the
userland process.

Add some more comments.

Some minor code styling.

Remove unused function, usb2_fifo_get_data_next().

Fix an issue about "fifo_index" being used instead of "ep_index".

src/sys/dev/usb2/core/usb2_device.c
src/sys/dev/usb2/core/usb2_generic.c

Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when
doing an alternate setting.

Cleanup USB IOCTL and USB reference handling.
Fix a corner case where USB-FS was left initialised after
setting a new configuration or alternate setting.

src/sys/dev/usb2/core/usb2_hub.c

Improvement: Check all USB HUB ports by default at least one time.

src/sys/dev/usb2/core/usb2_request.c

Bugfix: Make sure destination ASCII string is properly zero terminated
in all cases.

Improvement: Skip invalid characters instead of replacing with a dot.

src/sys/dev/usb2/core/usb2_util.c
src/sys/dev/usb2/image/uscanner2.c

Spelling.

src/sys/dev/usb2/include/Makefile

Share "usbdevs" with the old USB stack.

src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h

Regenerate files.

Alfred: Please fix the RCS tag at the top.

src/sys/dev/usb2/include/usb2_ioctl.h

Fix compilation of "kdump".

src/sys/dev/usb2/serial/ubsa2.c
src/sys/dev/usb2/serial/ugensa2.c

Remove device ID's which will end up in a new 3G driver.

src/sys/dev/usb2/sound/uaudio2.c

Correct a debug printout.

src/sys/dev/usb2/storage/umass2.c

Sync with old USB stack.

src/lib/libusb20/libusb20.3

Add more documentation.

src/lib/libusb20/libusb20.c

Various bugfixes and improvements.

src/usr.sbin/usbconfig/dump.c
src/usr.sbin/usbconfig/usbconfig.c

New commands for dumping strings and doing custom USB requests from
the command line.

Remove keyword requirements from generated files:
"head/sys/dev/usb2/include/usb2_devid.h"
"head/sys/dev/usb2/include/usb2_devtable.h"

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.

This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:

1) A brief feature list:

- A new and mutex enabled USB API.

- Many USB drivers are now running Giant free.

- Linux USB kernel compatibility layer.

- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.

- New "usbconfig" utility, for easy configuration of USB.

- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.

- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.

- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.

- Safer parsing of USB descriptors.

- Autodetect of annoying USB install disks.

- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.

- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.

- ... see the FreeBSD quarterly status reports under "USB project"

2) To enable the driver in the default kernel build:

2.a) Remove all existing USB device options from your kernel config
file.

2.b) Add the following USB device options to your kernel configuration
file:

# USB core support
device usb2_core

# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci

# USB mass storage support
device usb2_storage
device usb2_storage_mass

# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav

# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd

# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom

# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng

# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms

# USB sound and MIDI device support
device usb2_sound

2) To enable the driver at runtime:

2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.

2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.

Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred