Revert r330897:

This was intended to be a non-functional change. It wasn't. The commit
message was thus wrong. In addition it broke arm, and merged crypto
related code.

Revert with prejudice.

This revert skips files touched in r316370 since that commit was since
MFCed. This revert also skips files that require $FreeBSD$ property
changes.

Thank you to those who helped me get out of this mess including but not
limited to gonzo, kevans, rgrimes.

Requested by: gjb (re)

Partial merge of the SPDX changes

These changes are incomplete but are making it difficult
to determine what other changes can/should be merged.

No objections from: pfg

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

EHCI: Make core reset and port speed reading more generic.

Use driver settable callbacks for handling of:
- core post reset
- reading actual port speed

Typically, OTG enabled EHCI cores wants setting of USBMODE register,
but this register is not defined in EHCI specification and different
cores can have it on different offset.

Also, for cores with TT extension, actual port speed must be determinable.
But again, EHCI specification not covers this so this patch provides
function for two most common variant of speed bits layout.

Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D5088

Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.

This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.

A similar change was made in OpenBSD.

Discussed with: -arch, rdivacky
Reviewed by: cperciva

Allow using the embedded EHCI host controller in Freescale SoCs
by adding the missing bits. See ehci_fsl.c for their use.

Implement better support for USB controller suspend and resume.

This patch should remove the need for kldunload of USB
controller drivers at suspend and kldload of USB controller
drivers at resume.

This patch also fixes some build issues in avr32dci.c

MFC after: 2 weeks

Revert most of r197682 (EHCI Hardware BUG workaround). Implement
proper solution which is to not use the TERMINATE pointer, but rather
link to a halted TD. The initial fix was due to a misunderstanding
about how the EHCI hardware works. Thanks to Alan Stern for clearing
this up. This patch can increase mass storage read performance
significantly when the IRQ rate is less than 8000 IRQ/s.

Approved by: thompsa (mentor)

The NetBSD Foundation has granted permission to remove clause 3 and 4 from
their software.

Obtained from: NetBSD

Disable the use of the IAAD usb doorbell on NVidia controllers as it can cause
the hardware to stall.

Submitted by: Hans Petter Selasky

Integrate lost interrupts patch from the old USB stack.

Some EHCI chips from VIA / ATI seem to trigger interrupts before writing back
the qTD status, or miss signalling occasionally under heavy load. If the host
machine is too fast, we can miss transaction completion - when we scan the
active list the transaction still seems to be active. This generally exhibits
itself as a umass stall that never recovers.

We work around this behaviour by setting up this callback after any softintr
that completes with transactions still pending, giving us another chance to
check for completion after the writeback has taken place

Submitted by: Alexander Nedotsuko
MFC after: 3 days

Workaround buggy BIOS code in USB regard. By doing the BIOS to OS handover for
all host controllers at the same time, we avoid problems where the BIOS will
actually write to the USB registers of all the USB host controllers every time
we handover one of them, and consequently reset the OS programmed values.

Submitted by: avg
Reviewed by: jhb

Purge mergeinfo from files that were temporarily renamed while USB2 was
imported into the tree alongside USB.

Approved by: re (mergeinfo blanket)

s/usb2_/usb_/ on all typedefs for the USB stack.

s/usb2_/usb_/ on all C structs for the USB stack.

MFp4 //depot/projects/usb@160930

Change the roothub exec functions to take the usb request and data pointers
directly rather than placing them on the parent bus struct.

Submitted by: Hans Petter Selasky

Provide a better commit log for r190735, forced by making a whitespace change.

Refactor how we interface with the root HUB. This is achieved by making a
direct call from usb2_do_request to the host controller for root hub requests,
this call will perform the controller specific register read/writes and return
the error code.

This cuts out a lot of code in the host controller files and saves one thread
per USB bus.

Submitted by: Hans Petter Selasky

Remove pointeless mergeinfo that crept in from r190633.

MFp4 //depot/projects/usb@159922

Refactor how we interface with the root HUB. This cuts around 1200 lines of
code totally and saves one thread per USB bus.

Submitted by: Hans Petter Selasky

Implement an ipfw action to reassemble ip packets: reass.

Integrate user/mav/ata branch:

Add ch_suspend/ch_resume methods for PCI controllers and implement them
for AHCI. Refactor AHCI channel initialization according to it.

Fix Port Multipliers operation. It is far from perfect yet, but works now.
Tested with JMicron JMB363 AHCI + SiI 3726 PMP pair.
Previous version was also tested with SiI 4726 PMP.

Hardware sponsored by: Vitsch Electronics / VEHosting.nl

MFp4 //depot/projects/usb @159430

- Move tunable defines into usb_core.h and dependancy towards usb_defs.h
- Leave hardcoded defines in "usb_defs.h".
- Allow overriding all tunable defines.
- Add more customisable typedefs.
- Correct maximum device number.

Submitted by: Hans Petter Selasky

(re)merge r186415,186416 from the old usb stack;

o add Transaction Translator support (still missing ISOC xfers)
o add EHCI_SCFLG_BIGEMMIO flag to force big-endian byte-select to be
set in USBMODE
o split reset work into new public routine ehci_reset so bus shim drivers
can force big-endian byte-select before ehci_init
o enable TT and big-endian MMIO
o force a reset before ehci_init to get byte-select setup

Also go back to using USB_EHCI_BIG_ENDIAN_DESC at compile time to enable the
byteswapping and reduce diffs to the original commits.

This fixes the new USB stack on the Cambria board.

Move the new USB stack into its new home.

MFp4 //depot/projects/usb; 157069,157296,157375,157384,157430

- Change "usb2_pause_mtx" so that it takes the timeout value in ticks
- USB controller: EHCI High Speed Interrupt endpoint fix.
- Fix OHCI and EHCI counting bug when multiple TD's are involved in
a short USB transfer and a short packet happens on the non-last TD in the
USB transfer frame.
- USB process naming cleanup.

Submitted by: Hans Petter Selasky

MFp4: //depot/projects/usb@155834

Factor out roothub process into the USB bus structure for
all USB controller drivers. Essentially I am trying to
save some processes on the root HUB and get away
from the config thread pradigm. There will be a follow up
commit where the root HUB control and interrupt callback
will be moved over to run from the roothub process.
Total win: 3 processes become 1 for every USB controller.

Submitted by: Hans Petter Selasky

MFp4: //depot/projects/usb@155820

USB memory usage reduction patch.

Submitted by: Hans Petter Selasky

Sync with usb4bsd:

src/lib/libusb20/libusb20_desc.c

Make "libusb20_desc_foreach()" more readable.

src/sys/dev/usb2/controller/*.[ch]
src/sys/dev/usb2/core/*.[ch]

Implement support for USB power save for all HC's.

Implement support for Big-endian EHCI.

Move Huawei quirks back into "u3g" driver.

Improve device enumeration.

src/sys/dev/usb2/ethernet/*[ch]

Patches for supporting new AXE Gigabit chipset.

src/sys/dev/usb2/serial/*[ch]

Fix IOCTL return code.

src/sys/dev/usb2/wlan/*[ch]

Sync with old USB stack.

Submitted by: hps

src/sys/dev/usb2/controller/uss820dci_pccard.c
src/sys/dev/usb2/core/usbdevs
src/sys/dev/usb2/include/urio2_ioctl.h
src/sys/dev/usb2/storage/ustorage2_fs.h

These files are not used any more.

src/usr.sbin/Makefile
src/etc/mtree/BSD.include.dist
src/include/Makefile
src/lib/Makefile
src/share/man/man7/hier.7
src/share/mk/bsd.libnames.mk
src/etc/mtree/BSD.include.dist

Make "usbconfig" and "libusb20" a part of the default build.

src/sys/dev/usb/rio500_usb.h
src/sys/dev/usb2/storage/urio2.c

Use common include file.

src/sys/dev/usb2/bluetooth/ng_ubt2.c

Make USB bluetooth depend on "ng_hci" module.

src/sys/dev/usb2/controller/ehci2.c
src/sys/dev/usb2/controller/ehci2.h

Patches for Marvell EHCI.

src/sys/dev/usb2/core/usb2_busdma.c

Bugfix for 64-bit platforms. Need to unload the previously loaded DMA
map and some cleanup regarding some corner cases.

src/sys/dev/usb2/core/usb2_core.h
src/sys/dev/usb2/core/usb2_dev.c
src/sys/dev/usb2/core/usb2_dev.h

Bugfix for libusb filesystem interface.

New feature: Add support for filtering device data at the expense of the
userland process.

Add some more comments.

Some minor code styling.

Remove unused function, usb2_fifo_get_data_next().

Fix an issue about "fifo_index" being used instead of "ep_index".

src/sys/dev/usb2/core/usb2_device.c
src/sys/dev/usb2/core/usb2_generic.c

Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when
doing an alternate setting.

Cleanup USB IOCTL and USB reference handling.
Fix a corner case where USB-FS was left initialised after
setting a new configuration or alternate setting.

src/sys/dev/usb2/core/usb2_hub.c

Improvement: Check all USB HUB ports by default at least one time.

src/sys/dev/usb2/core/usb2_request.c

Bugfix: Make sure destination ASCII string is properly zero terminated
in all cases.

Improvement: Skip invalid characters instead of replacing with a dot.

src/sys/dev/usb2/core/usb2_util.c
src/sys/dev/usb2/image/uscanner2.c

Spelling.

src/sys/dev/usb2/include/Makefile

Share "usbdevs" with the old USB stack.

src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h

Regenerate files.

Alfred: Please fix the RCS tag at the top.

src/sys/dev/usb2/include/usb2_ioctl.h

Fix compilation of "kdump".

src/sys/dev/usb2/serial/ubsa2.c
src/sys/dev/usb2/serial/ugensa2.c

Remove device ID's which will end up in a new 3G driver.

src/sys/dev/usb2/sound/uaudio2.c

Correct a debug printout.

src/sys/dev/usb2/storage/umass2.c

Sync with old USB stack.

src/lib/libusb20/libusb20.3

Add more documentation.

src/lib/libusb20/libusb20.c

Various bugfixes and improvements.

src/usr.sbin/usbconfig/dump.c
src/usr.sbin/usbconfig/usbconfig.c

New commands for dumping strings and doing custom USB requests from
the command line.

Remove keyword requirements from generated files:
"head/sys/dev/usb2/include/usb2_devid.h"
"head/sys/dev/usb2/include/usb2_devtable.h"

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.

This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:

1) A brief feature list:

- A new and mutex enabled USB API.

- Many USB drivers are now running Giant free.

- Linux USB kernel compatibility layer.

- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.

- New "usbconfig" utility, for easy configuration of USB.

- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.

- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.

- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.

- Safer parsing of USB descriptors.

- Autodetect of annoying USB install disks.

- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.

- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.

- ... see the FreeBSD quarterly status reports under "USB project"

2) To enable the driver in the default kernel build:

2.a) Remove all existing USB device options from your kernel config
file.

2.b) Add the following USB device options to your kernel configuration
file:

# USB core support
device usb2_core

# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci

# USB mass storage support
device usb2_storage
device usb2_storage_mass

# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav

# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd

# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom

# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng

# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms

# USB sound and MIDI device support
device usb2_sound

2) To enable the driver at runtime:

2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.

2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.

Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred