#
322119 |
|
06-Aug-2017 |
marius |
MFC: r319350, r321385, r321490, r321588, r321948
o Use SDHCI_CAN_DRIVE_TYPE_{A,C,D} to check for driver type support in SDHCI_CAPABILITIES2 instead of SDHCI_CTRL2_DRIVER_TYPE_{A,C,D} which are meant for setting the driver type in SDHCI_HOST_CONTROL2.
o Add support for eMMC HS200 and HS400 bus speed modes at 200 MHz to sdhci(4), mmc(4) and mmcsd(4).
On the system where the addition of DDR52 support increased the read throughput to ~80 MB/s (from ~45 MB/s at high speed), HS200 yields ~154 MB/s and HS400 ~187 MB/s, i. e. performance now has more than quadrupled compared to pre-r315598 (pre-r318494 in stable/11).
However, in fact this isn't a feature-only change; there are boards based on Intel Bay Trail where DDR52 is problematic and the suggested workaround is to use HS200 mode instead. So far exact details are unknown, however, i. e. whether that's due to a defect in these SoCs or on the boards.
Moreover, due to the above changes requiring to be aware of possible MMC siblings in the fast path of mmc(4), corresponding information now is cached in mmc_softc. As a side-effect, mmc_calculate_clock(), now longer will trigger a panic in low memory situations and all of mmc(4) operate on the same set of child devices.
o Fix a bug in the failure reporting of mmcsd_delete() that could lead to a panic.
o Fix 2 bugs on resume, one in mmcsd(4) that could lead to a panic and another one in mmc(4) that could lead to devices no longer working.
o Fix a memory leak in mmcsd_ioctl() in case copyin(9) fails. [1]
o Fix missing variable initialization in mmc_switch_status(). [2]
o Fix R1_SWITCH_ERROR detection in mmc_switch_status(). [3]
o Handle the case of device_add_child(9) failing, for example due to a memory shortage, gracefully in mmc(4) and sdhci(4), including not leaking memory for the instance variables in case of mmc(4), also fixing [4].
o Correctly use the size of a pointer rather than that of a pointer to a pointer (this bug was present in head r321385 only, i. e. not in a stable branch). [5]
o Handle the case of an unknown SD CSD version in mmc_decode_csd_sd() gracefully instead of calling panic(9).
o Again, check and handle the return values of some additional function calls in mmc(4) instead of assuming that everything went right or mark non-fatal errors by casting the return value to void.
o Correct a typo in the Linux IOCTL compatibility; it should have been MMC_IOC_MULTI_CMD rather than MMC_IOC_CMD_MULTI.
o Now that we are reaching ever faster speeds (more improvement in this regard is to be expected when adding ADMA support to sdhci(4)), apply a few micro-optimizations to mmc(4), mmcsd(4) and sdhci(4).
o Correct confusing and error prone mix-ups between "br" or "bridge" in mmc(4) and mmcsd(4) where - according to the terminology outlined in comments of bridge.h and mmcbr_if.m around since their addition in r163516 - the bus is meant and used instead.
o Remove comment lines from bridge.h incorrectly suggesting that there would be a MMC bridge base class driver.
o Update comments in bridge.h regarding the star topology of SD and SDIO; since version 3.00 of the SDHCI specification, for eSD and eSDIO bus topologies are actually possible in form of so called "shared buses" (in some subcontext later on renamed to "embedded" buses).
Reported by: Coverity CID: 1372612 [1], 1372624 [2], 1372594 [3], 1007069 [4], 1378432 [5]
|
#
318197 |
|
11-May-2017 |
marius |
MFC: r312939, r313250, r314811 (partial), r314887 (partial), r315760, r315845, 315430, r317981, r315466
o Fix some overly long lines, whitespace and other bugs according to style(9) as well as spelling etc. in mmc(4), mmcsd(4) and sdhci(4).
o In the mmc(4) bridges and sdhci(4) (bus) front-ends: - Remove redundant assignments of the default bus_generic_print_child device method, - use DEVMETHOD_END, - use NULL instead of 0 for pointers.
o Trim/adjust includes.
o Add and use a MMC_DECLARE_BRIDGE macro for declaring mmc(4) bridges as kernel drivers and their dependency onto mmc(4).
o Add support for eMMC "partitions". Besides the user data area, i. e. the default partition, eMMC v4.41 and later devices can additionally provide up to: 1 enhanced user data area partition 2 boot partitions 1 RPMB (Replay Protected Memory Block) partition 4 general purpose partitions (optionally with a enhanced or extended attribute)
Besides simply subdividing eMMC devices, some Intel NUCs having UEFI code in the boot partitions etc., another use case for the partition support is the activation of pseudo-SLC mode, which manufacturers of eMMC chips typically associate with the enhanced user data area and/ or the enhanced attribute of general purpose partitions.
CAVEAT EMPTOR: Partitioning eMMC devices is a one-time operation.
o Now that properly issuing CMD6 is crucial (so data isn't written to the wrong partition for example), make a step into the direction of correctly handling the timeout for these commands in the MMC layer. Also, do a SEND_STATUS when CMD6 is invoked with an R1B response as recommended by relevant specifications.
o Add an IOCTL interface to mmcsd(4); this is sufficiently compatible with Linux so that the GNU mmc-utils can be ported to and used with FreeBSD (note that due to the remaining deficiencies outlined above SANITIZE operations issued by/with `mmc` currently most likely will fail). These latter have been added to ports as sysutils/mmc-utils. Among others, the `mmc` tool of mmc-utils allows for partitioning eMMC devices (tested working).
o For devices following the eMMC specification v4.41 or later, year 0 is 2013 rather than 1997; so correct this for assembling the device ID string properly.
o Let mmcsd.ko depend on mmc.ko. Additionally, bump MMC_VERSION as at least for some of the above a matching pair is required.
o In the ACPI front-end of sdhci(4) describe the Intel eMMC and SDXC controllers as such in order to match the PCI one. Additionally, in the entry for the 80860F14 SDXC controller remove the eMMC-only SDHCI_QUIRK_INTEL_POWER_UP_RESET.
|