Revert r330897:

This was intended to be a non-functional change. It wasn't. The commit
message was thus wrong. In addition it broke arm, and merged crypto
related code.

Revert with prejudice.

This revert skips files touched in r316370 since that commit was since
MFCed. This revert also skips files that require $FreeBSD$ property
changes.

Thank you to those who helped me get out of this mess including but not
limited to gonzo, kevans, rgrimes.

Requested by: gjb (re)

Partial merge of the SPDX changes

These changes are incomplete but are making it difficult
to determine what other changes can/should be merged.

No objections from: pfg

MFC r315545: Remove hackish code delaying ATIOs to unknown virtual port.

Since we support RQSTYPE_RPT_ID_ACQ, that functionality is only useful
in loop mode, which probably doesn't worth having this hack in 2017.

MFC r315536: Move <= 23xx PDB workaround to generic code.

It is chip-specific and has nothing to do with platform.

MFC r315533: Move 24xx RQSTYPE_NOTIFY handling to generic code.

This code has nothing to do with specific platform.

MFC r315507: Reorganize RQSTYPE_NOTIFY handling for chips <= 23xx.

There were two copies of the code: one in generic code was half-broken, and
another in platform code was never called. Leave only one in generic code
and working.

MFC r315489: Move RQSTYPE_ABTS_RCVD parsing into generic code.

MFC r315488: Extend nt_lun to full 8 byte.

MFC r315485: Remove dead remnants of SPI target.

MFC r315482: Use isp_target_put_entry() in places where it can be.

This unifies the code and removes some duplication.

MFC r315478: Do some notify acks cleanup.

ISPASYNC_TARGET_NOTIFY_ACK makes no sense without argument.

MFC r315279: Remove some dead/broken code paths around async handling

MFC r315160: Remove code for unsupported FreeBSD versions.

MFC r314299, r314300: Fix residual length reporting in target mode.

This allows to properly handle cases when target wants to receive or send
more data then initiator wants to send or receive. Previously in such
cases isp(4) returned CAM_DATA_RUN_ERR, while now it returns resid > 0.

MFC r314086: Fix multiple problems around LUN disable under load.

- Move private data about ATIOs/INOTs from per-LUN to per-channel data.
This allows active commands to continue operation after LUN destruction.
This also simplifies lookup of the data by tag in some situations.
- Unify three restart_queue processing implementations.
- Complete all ATIOs from restart_queue on LUN disable.
- Delete ATIO private data when command completed or aborted, not depending
on the ATIO being requeued, that was ugly hack and could never happen. CAM
should always call ether XPT_CONT_TARGET_IO with status or XPT_ABORT.
- Implement XPT_ABORT for queued ATIOs/INOTs to allow CAM do graceful
shutdown, not depending on LUN disable, as it is done in ahd(4)/targ(4).
- Unify isp_endcmd() arguments to make it more usable in generic code.
- Remove never really used LUN state reference counter.

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Add proper reporting for early task management errors.

This covers unknown requests and requests to unknown virtual ports.
Previously it "worked" only because of timeout handling on initiator.

Unify Multi ID target code by reusing isp_find_chan_by_did().

Fix FCP_CMD LENGTH mask in ATIO7 IOCB.

This caused "long IU length (16384) ignored" errors following by others.

MFC after: 2 weeks

Unify handles allocation for initiator and target IOCBs.

I am not sure why this was split long ago, but I see no reason for it.
At this point this unification just slightly reduces memory usage, but
as next step I plan to reuse shared handle space for other IOCB types.

Rename ASYNC_LIP_F8 to ASYNC_LIP_NOS_OLS_RECV.

New name better repsents its meaning for modern chips.

Rip off target mode support for parallel SCSI QLogic adapters.

Hacks to enable target mode there complicated code, while didn't really
work. And for outdated hardware fixing it is not really interesting.

Initiator mode tested with Qlogic 1080 adapter is still working fine.

Remove some confusions between loopid and nphdl.

Modern cards in most cases operate abstract port handles, that have no
any relation to real loop IDs. Leave loopid used only where it really
goes about local loop IDs.

While there, fix few more cases where LUNs were still printed in decimal.

Deliver INOTs only to enabled virtual ports.

Add PIM_EXTLUNS support to isp(4) driver.

Now 24xx and above chips support full 8-byte LUN address space.
Older FC chips may support up to 16K LUNs when firmware allows.
Tested in both initiator and target modes for 23xx, 24xx and 25xx.

Add partial support for QUERY TMF to CAM and isp(4).

This change allows to decode respective functions in isp(4) in target mode
and pass them through CAM to CTL. Unfortunately neither CAM nor isp(4)
support returning response info for those task management functions now.

On the other side I just have no initiator to test this functionality.

Improve INOTs handling for 24xx and above chips.

-----------
MISC CHANGES

Add a new async event- ISP_TARGET_NOTIFY_ACK, that will guarantee
eventual delivery of a NOTIFY ACK. This is tons better than just
ignoring the return from isp_notify_ack and hoping for the best.

Clean up the lower level lun enable code to be a bit more sensible.

Fix a botch in isp_endcmd which was messing up the sense data.

Fix notify ack for SRR to use a sensible error code in the case
of a reject.

Clean up and make clear what kind of firmware we've loaded and
what capabilities it has.
-----------
FULL (252 byte) SENSE DATA

In CTIOs for the ISP, there's only a limimted amount of space
to load SENSE DATA for associated CHECK CONDITIONS (24 or 26
bytes). This makes it difficult to send full SENSE DATA that can
be up to 252 bytes.

Implement MODE 2 responses which have us build the FCP Response
in system memory which the ISP will put onto the wire directly.

On the initiator side, the same problem occurs in that a command
status response only has a limited amount of space for SENSE DATA.
This data is supplemented by status continuation responses that
the ISP pushes onto the response queue after the status response.
We now pull them all together so that full sense data can be
returned to the periph driver.

This is supported on 23XX, 24XX and 25XX cards.

This is also preparation for doing >16 byte CDBs.

-----------
FC TAPE

Implement full FC-TAPE on both initiator and target mode side. This
capability is driven by firmware loaded, board type, board NVRAM
settings, or hint configuration options to enable or disable. This
is supported for 23XX, 24XX and 25XX cards.

On the initiator side, we pretty much just have to generate a command
reference number for each command we send out. This is FCP-4 compliant
in that we do this per ITL nexus to generate the allowed 1 thru 255
CRN.

In order to support the target side of FC-TAPE, we now pay attention
to more of the PRLI word 3 parameters which will tell us whether
an initiator wants confirmed responses. While we're at it, we'll
pay attention to the initiator view too and report it.

On sending back CTIOs, we will notice whether the initiator wants
confirmed responses and we'll set up flags to do so.

If a response or data frame is lost the initiator sends us an SRR
(Sequence Retransmit Request) ELS which shows up as an SRR notify
and all outstanding CTIOs are nuked with SRR Received status. The
SRR notify contains the offset that the initiator wants us to restart
the data transfer from or to retransmit the response frame.

If the ISP driver still has the CCB around for which the data segment
or response applies, it will retransmit.

However, we typically don't know about a lost data frame until we
send the FCP Response and the initiator totes up counters for data
moved and notices missing segments. In this case we've already
completed the data CCBs already and sent themn back up to the periph
driver. Because there's no really clean mechanism yet in CAM to
handle this, a hack has been put into place to complete the CTIO
CCB with the CAM_MESSAGE_RECV status which will have a MODIFY DATA
POINTER extended message in it. The internal ISP target groks this
and ctl(8) will be modified to deal with this as well.

At any rate, the data is retransmitted and an an FCP response is
sent. The whole point here is to successfully complete a command
so that you don't have to depend on ULP (SCSI) to have to recover,
which in the case of tape is not really possible (hence the name
FC-TAPE).

Sponsored by: Spectralogic
MFC after: 1 month

Revamp the pieces of some of the stuff I forgot to do when shifting to
32 bit handles. The RIO (reduced interrupt operation) and fast posting
for the parallel SCSI cards were all 16 bit handles. Furthermore,
target mode parallel SCSI only can have 16 bit handles.

Use part of a supplied patch to switch over to using 32 bit handles.
Be a bit more conservative here and only do this for parallel SCSI
for the 12160 (Ultra3) cards. There were a lot of marginal Ultra2
cards, and, frankly, few are findable now for testing.

Fix the target handle routine to only do 16 bit handles for parallel
SCSI cards. This is okay because the upper sixteen bits of the new
32 bit handles is a sequence number to help protect against duplicate
completions. This would be very unlikely to happen with parallel
SCSI target mode, and wasn't present before, so we're no worse off
than we used to be.

While we're at it, finally split the async mailbox completion handlers
into FC and parallel SCSI functions. This makes it much cleaner and
easier to figure out what is or isn't a legal async mailbox completion
code for different card classes.

PR: kern/144250
Submitted partially by: Charles D
MFC after: 1 week

Add 8Gb support (isp_2500). Fix a fair number of configuration and
firmware loading bugs.

Target mode support has received some serious attention to make it
more usable and stable.

Some backward compatible additions to CAM have been made that make
target mode async events easier to deal with have also been put
into place.

Further refinement and better support for NP-IV (N-port Virtualization)
is now in place.

Code for release prior to RELENG_7 has been stripped away for code clarity.

Sponsored by: Copan Systems

Reviewed by: scottl, ken, jung-uk kim
Approved by: re

Spelling fix for interupt -> interrupt

Fix some stupid copyright mistakes that have been there for quite some time.

Grumble- let a linux-ism slip in and had an llx which
then choked on a 64 bit platforms. Oops.

MFP4: Move default setting to the end of isp_reset instead of the
front of isp_init so we can read NVRAM even if we're role ISP_NONE.
Prepare for reintroduction of channels (for FC) for N-Port
Virtualization.

Fix a botch in handle assignment that caused us to nuke one device
when a new one arrives and end up with two devices with the same
identity in the virtual target mapping table.

Add a chip timeout to ENABLE/MODIFY/DISABLE lun calls.

MFC after: 1 month

Add 4Gb (24XX) support and lay the foundation for a lot of new stuff.

Fix na_fcentry_t to not have a lun field. Fix indentation in handly
the notify structs. Fix messages in isp_got_msg_fc to print out the
loop id of the sender- not the wwpn which will be synthesized later,
if possible, in the outer layers. Put in debug printouts to pair
a notify ack to a notify so one can see the start/close of an
immediate notify event. Put in spsace for TASK MANAGEMENT response
flags (which we don't do yet).

Some rearrangement of headers to minimize diffs with outside of
FreeBSD repository and to clean up the license header so as to
not pollute the license with file function.

Zero all mailbox structures prior to use (just in case). Change
the outgoing mailbox count for INIT_FIRMWARE to be correct.

Put in some missing target mode for 2KLOGIN f/w spots.

MFC after: 1 month

Redo some code based upon issues found by Coverity.

Some more gratuitous format and name changes.

Pull in some target mode changes from a private branch.
Pull in some more RELENG_4 compilation changes.

A lot of lines changed, but not much content change yet.

a) clean up some declaration stuff (i.e., make more modern with respect
to getting rid u_int for uint and so on).

b) Turn back on 64 bit DAC support. Cheeze it a bit in that we have two
DMA callback functions- one when we have bus_addr_t > 4 bits in width and
the other which should be normal. Even Cheezier in that we turn off setting
up DMA maps to be BUS_SPACE_MAXADDR if we're in ISP_TARGET_MODE. More work
on this in a week or so.

c) Tested under amd64 and 1MB DFLTPHYS, sparc64, i386 (PAE, but insufficient
memory to really test > 4GB). LINT check under amd64.

MFC after: 1 month

First of several commits as this driver is dusted off and maybe brought
up to date. Principle changes for this reelase is to support 2K Port Login
firmware. This allows us to support the 2322 (and 2422 4Gb) cards which only
come with the 2K Port Login firmware. The 2322 should now work- but we don't
have firmware sets for it in ispfw (as the change to load 2K Port Login f/w
hasn't been made- that f/w is so big it has to be loaded in more than one
chunk).

Other changes are the beginnings of cleaning up some long standing target
mode issues. The next changes here will incorporate a lot of bug fixes
from others.

Finally, some copyright cleanup and attempts to make the parts of the
driver that are FreeBSD specific start conforming more to FreeBSD style.

MFC after: 1 month

Macroize the making of tag ids.

MFC after: 2 weeks

Start each of the license/copyright comments with /*-, minor shuffle of lines

Store the target handles in a separate list from normal commands. Add a
CTIO fast post routine to handle CTIO completions.

Submitted by: mjacob

Fix a bug where we never managed to include the sense data we wanted to send.

Fix longstanding buglet- for centrally handled CTIO2s we were checking the wrong
bit for this being the last CTIO2. It didn't matter since it really was the
last CTIO2 and the resources recycled, but still....

Add in CTIO3 define for future DAC work.

Some ridiculous target mode botches- like having the wrong definitions
for messages. Some spelling fixes. Some target mode structure cleanups
to reflect reality.

Remove unused variables
Add /* FALLTHROUGH */

Found by: FlexeLint

Pointy hat- bad commit.

Make sure we propagate rxid && iid in isp_target_put_atio

Fix typos, mostly s/ an / a / where appropriate and a few s/an/and/
Add FreeBSD Id tag where missing.

LINT related fixes (as noticed by bde)

Change isp_target_async to a function returning an integer.

Roll most immediate notifies into something the platform has to handle.

+ A variety of 23XX changes:
disable MWI on 2300

based on function code, set an 'isp_port' for the 2312- it's a
separate instance, but the NVRAM is shared, and the second port's
NVRAM is at offset 256.

+ Enable RIO operation for LVD SCSI cards. This makes a *big* difference
as even under reasonable load we get batched completions of about 30
commands at a time on, say, an ISP1080.

+ Do 'continuation' mailbox commands- this allows us to specify a work
area within the softc and 'continue' repeated mailbox commands. This is
more or less on an ad hoc basis and is currently only used for firmware
loading (which f/w now loads substantially faster becuase the calling
thread is only woken when all the f/w words are loaded- not for each
one of the 40000 f/w words that gets loaded).

+ If we're about to return from isp_intr with a 'bogus interrupt' indication,
and we're not a 23XX card, check to see whether the semaphore register is
currently *2* (not *1* as it should be) and whether there's an async completion
sitting in outgoing mailbox0. This seems to capture cases of lost fast posting
and RIO interrupts that the 12160 && 1080 have been known to pump out under
extreme load (extreme, as in > 250 active commands).

+ FC_SCRATCH_ACQUIRE/FC_SCRATCH_RELEASE macros.

+ Endian correct swizzle/unswizzle of an ATIO2 that has a WWPN in it.

MFC after: 1 week

Major restructuring for swizzling to the request queue and unswizzling from
the response queue. Instead of the ad hoc ISP_SWIZZLE_REQUEST, we now have
a complete set of inline functions in isp_inline.h. Each platform is
responsible for providing just one of a set of ISP_IOX_{GET,PUT}{8,16,32}
macros.

The reason this needs to be done is that we need to have a single set of
functions that will work correctly on multiple architectures for both little
and big endian machines. It also needs to work correctly in the case that
we have the request or response queues in memory that has to be treated
specially (e.g., have ddi_dma_sync called on it for Solaris after we update
it or before we read from it). It also has to handle the SBus cards (for
platforms that have them) which, while on a Big Endian machine, do *not*
require *most* of the request/response queue entry fields to be swizzled
or unswizzled.

One thing that falls out of this is that we no longer build requests in the
request queue itself. Instead, we build the request locally (e.g., on the
stack) and then as part of the swizzling operation, copy it to the request
queue entry we've allocated. I thought long and hard about whether this was
too expensive a change to make as it in a lot of cases requires an extra
copy. On balance, the flexbility is worth it. With any luck, the entry that
we build locally stays in a processor writeback cache (after all, it's only
64 bytes) so that the cost of actually flushing it to the memory area that is
the shared queue with the PCI device is not all that expensive. We may examine
this again and try to get clever in the future to try and avoid copies.

Another change that falls out of this is that MEMORYBARRIER should be taken
a lot more seriously. The macro ISP_ADD_REQUEST does a MEMORYBARRIER on the
entry being added. But there had been many other places this had been missing.
It's now very important that it be done.

Additional changes:

Fix a longstanding buglet of sorts. When we get an entry via isp_getrqentry,
the iptr value that gets returned is the value we intend to eventually plug
into the ISP registers as the entry *one past* the last one we've written-
*not* the current entry we're updating. All along we've been calling sync
functions on the wrong index value. Argh. The 'fix' here is to rename all
'iptr' variables as 'nxti' to remember that this is the 'next' pointer-
not the current pointer.

Devote a single bit to mboxbsy- and set aside bits for output mbox registers
that we need to pick up- we can have at least one command which does not
have any defined output registers (MBOX_EXECUTE_FIRMWARE).

MFC after: 2 weeks

Note for ATIOs returned because of BDRs or Bus Resets for which bus this
applies to. Do more bus # foo things.

Acknowledge Immediate Notifies right away prior to throwing events upstream
(where they're currently being ignored, *groan*)

Capture ASYNC_LIP_F8 as with ASYNC_LIP_OCCURRED. Don't percolate them
upstream as if they were BUS RESETS- they're not.

Because we now store SCCLUN capabilities in firmware attributes, get
rid of the silly test of isp_maxluns > 16 and use the attibutes directly.

MFC after: 4 weeks

Spring MegaChange #1.

----

Make a device for each ISP- really usable only with devfs and add an ioctl
entry point (this can be used to (re)set debug levels, reset the HBA,
rescan the fabric, issue lips, etc).

----

Add in a kernel thread for Fibre Channel cards. The purpose of this
thread is to be woken up to clean up after Fibre Channel events
block things. Basically, any FC event that casts doubt on the
location or identify of FC devices blocks the queues. When, and
if, we get the PORT DATABASE CHANGED or NAME SERVER DATABASE CHANGED
async event, we activate the kthread which will then, in full thread
context, re-evaluate the local loop and/or the fabric. When it's
satisfied that things are stable, it can then release the blocked
queues and let commands flow again.

The prior mechanism was a lazy evaluation. That is, the next command
to come down the pipe after change events would pay the full price
for re-evaluation. And if this was done off of a softcall, it really
could hang up the system.

These changes brings the FreeBSD port more in line with the Solaris,
Linux and NetBSD ports. It also, more importantly, gets us being
more proactive about topology changes which could then be reflected
upwards to CAM so that the periph driver can be informed sooner
rather than later when things arrive or depart.

---

Add in the (correct) usage of locking macros- we now have lock transition
macros which allow us to transition from holding the CAM lock (Giant)
and grabbing the softc lock and vice versa. Switch over to having this
HBA do real locking. Some folks claim this won't be a win. They're right.
But you have to start somewhere, and this will begin to teach us how
to DTRT for HBAs, etc.

--

Start putting in prototype 2300 support. Add back in LIP
and Loop Reset as async events that each platform will handle.
Add in another int_bogus instrumentation point.

Do some more substantial target mode cleanups.

MFC after: 8 weeks

Perform some more Ansification. Remove and then replace the isp_putback_atio
function- we did it a bit cleaner. We only use this if a CTIO completes with
!CT_OK state. We now have managed to get away without having to poke around
and trying to find the original ATIO- the csio we're using has the tag_id
and lun values with it which is mostly what we need when we do the putback.

Make sure we correctly propagate AT_TQAE->CT_TQAE for tags. Make sure
we call ISP_DMAFREE only if we had DATA to move.

Clean up usage- ct_reserved is really ct_syshandle now.

Switch to using 16 bit handles instead of 32 bit handles.
This is a pretty invasive change, but there are three good
reasons to do this:

1. We'll never have > 16 bits of handle.
2. We can (eventually) enable the RIO (Reduced Interrupt Operation)
bits which return multiple completing 16 bit handles in mailbox
registers.
3. The !)$*)$*~)@$*~)$* Qlogic target mode for parallel SCSI spec
changed such that at_reserved (which was 32 bits) was split into
two pieces- and one of which was a 16 bit handle id that functions
like the at_rxid for Fibre Channel (a tag for the f/w to correlate
CTIOs with a particular command). Since we had to muck with that
and this changed the whole handler architecture, we might as well...

Propagate new at_handle on through int ct_fwhandle. Follow
implications of changing to 16 bit handles.

These above changes at least get Qlogic 1040 cards working in target
mode again. 1080/12160 cards don't work yet.

In isp.c:
Prepare for doing all loop management in outer layers.

Fix typo: wierd -> weird.

There is no such thing as wierd in the english language.

some copyright cleanups

various fixes

Remove isp_tdebug. Change all PRINTF macros to the now common
isp_prt logging function.

If debugging set, zero out an incoming response entry
when we're done reading it (makes checking things easier).
Before calling isp_notify_ack make sure we're at RUNSTATE-
elsewise we can be responding to LIPs or SCSI bus resets
before we've finished some of the wiring.

Remove all ISP2100_SCCLUN define based code and replace it with runtime
comparisons against the tag isp_maxluns- if > 16, we're SCCLUN based.

On initial regular SCSI startup, disable auto-disconnect.

Some minor tweaklets.

Correctly identify which bus of dual bus SCSI adapters some target mode
commands (enable/disable/modify lun && immediate notify) we're talking about.

Approved: jkh

Correct a minor typo in error message.

Approved: jkh@freebsd.org

cleanup- it was not MI code as it should have been

set default target mode debug to 0

These are platform independent functions for target mode support.
This is just a first pass at this and is likely to change a bit
over the next month.