Revert r330897:

This was intended to be a non-functional change. It wasn't. The commit
message was thus wrong. In addition it broke arm, and merged crypto
related code.

Revert with prejudice.

This revert skips files touched in r316370 since that commit was since
MFCed. This revert also skips files that require $FreeBSD$ property
changes.

Thank you to those who helped me get out of this mess including but not
limited to gonzo, kevans, rgrimes.

Requested by: gjb (re)

Partial merge of the SPDX changes

These changes are incomplete but are making it difficult
to determine what other changes can/should be merged.

No objections from: pfg

MFC r315908: Unify initiator and target DMA setup and command sending.

The code is so alike that it is pointless to keep it separate.

MFC r315682, r315683: Remove some dead code left after r246713.

MFC r315677: Clean/unify some macro usage.

MFC r315579, r315670: Add initial support for multiple MSI-X vectors.

For 24xx and above use 2 vectors (default and response queue).
For 26xx and above use 3 vectors (default, response and ATIO queues).
Due to global lock interrupt hardlers never run simultaneously now, but
at least this allows to save one regitster read per interrupt.

MFC r315307: Refactor interrupt handling.

Instead of single isp_intr() function doing all possible magic, introduce
four different functions to handle mailbox operation completions, async
events, response and ATIO queues. The goal is to isolate different code
paths to make code more readable, and to make easier support for multiple
interrupt vectors. Even oldest hardware in many cases can identify what
code path it should run on interrupt. Contemporary hardware can assign
them to different interrupt vectors.

MFC r315234: Improvements around attach, reset and detach.

This change fixes DMA resource leak on driver unload. Also it removes
DMA resources allocation for hardcoded number of requests before fetching
the real number from firmware. Also it prepares ground for more flexible
IRQs allocation according to firmware capabilities.

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Remove NULL checks after M_WAITOK allocations from isp(4).

MFC after: 1 month
Sponsored by: The FreeBSD Foundation

Split DMA buffers for request, response and ATIO queues.

Make 16Gig chips to use new queue pointer registers.

While 24xx-style ATIO and reply queue registers seems like still working,
request queue doesn't. So instead of that use registers from PCI BAR(4).

Remove "disable" hint, which duplicates system-wide "disabled".

Rip off target mode support for parallel SCSI QLogic adapters.

Hacks to enable target mode there complicated code, while didn't really
work. And for outdated hardware fixing it is not really interesting.

Initiator mode tested with Qlogic 1080 adapter is still working fine.

Formalize/unify chip (re-)inits.

Missed addition for r289812.

Some polishing and unification in ISR code.

Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c. It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code. The MD busdma is then given a chance to do any final processing
in the complete() callback.

The cam changes unify the bus_dmamap_load* handling in cam drivers.

The arm and mips implementations are updated to track virtual
addresses for sync(). Previously this was done in a type specific
way. Now it is done in a generic way by recording the list of
virtuals in the map.

Submitted by: jeff (sponsored by EMC/Isilon)
Reviewed by: kan (previous version), scottl,
mjacob (isp(4), no objections for target mode changes)
Discussed with: ian (arm changes)
Tested by: marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)

Don't allow for more than one segment for the control space since
we're not set up to deal with that.

X-MFC: 242479
MFC after: 1 week

Remove dependence on MAXPHYS.

MFC after: 1 month

Add detach logic to SBus variant.

Obtained from: Marius
MFC after: 1 month

Grr.!$()!$$ I missed checking this in even though I *did* run
a tinderbox myself and caught the error.

Change to isp_send_cmd needs a final ecmd argument.

Sponsored by: Spectralogic
MFC after: 1 month
X-MFC: 238869

Adding missing dependancies for loading hptiop(4), hptmv(4) and isp(4) as modules.

PR: kern/166239
Submitted by: Pavel Timofeev <timp87@gmail.com>
Discussed on: -stable, -scsi
Reviewed by: scottl
No objection from: mjacob
Approved by: cperciva
MFC after: 3 days

- Use the correct DMA tag/map pair for synchronize the FC scratch area.
- Allocate coherent DMA memory for the request/response queue area and
and the FC scratch area.

These changes allow isp(4) to work properly on sparc64 with usage of the
IOMMU streaming buffers enabled.

Approved by: mjacob
MFC after: 2 weeks

On sparc64 obtain the initiator ID from the Open Firmware device tree
in order to match what the PROM built-in driver uses.

Approved by: mjacob

Put gone device timer into a structure tag that can hold more than 32 seconds. Oops.

Untangle some of the confusion about what role means when it's in the FCPARAM/SDPARAM
or isp_fc/isp_spi structures. This fixed a problem about seeing targets appear if you've
turned off autologin and find them, or rather don't, via camcontrol rescan.

MFC after: 1 month

Redo how commands handles are created and managed and implement sequence
numbers and handle types in rational way. This will better protect from
(unwittingly) dealing with stale handles/commands.

Fix the watchdog timeout code to better protect itself from mistakes.

If we run an abort on a putatively timed out command, the command
may in fact get completed, so check to make sure the command we're
timing it out is still around. If the abort succeeds, btw, the command
should get returned via a different path.

Unbreak SBus cards which have been broken (apparently) for a while.
Most of the pieces came from Marius- correct settings for channels
and resource management. The one piece missing was that you cannot
for SBus cards replace 32 bit operations with A64 operations- not
supported.

Submitted by: marius
MFC after: 3 days

Add 8Gb support (isp_2500). Fix a fair number of configuration and
firmware loading bugs.

Target mode support has received some serious attention to make it
more usable and stable.

Some backward compatible additions to CAM have been made that make
target mode async events easier to deal with have also been put
into place.

Further refinement and better support for NP-IV (N-port Virtualization)
is now in place.

Code for release prior to RELENG_7 has been stripped away for code clarity.

Sponsored by: Copan Systems

Reviewed by: scottl, ken, jung-uk kim
Approved by: re

Add missing locking for SBus controllers.

Bad merge.

Fix pointy-hat problem with BUS_DMA_ROOTARG macro that caused problems for sparc64.
Candidate for immediate MFC.

Noticed by: Everyone-maxim contacted.

Make this an MP safe driver but also still be multi-release.
Seems to work on RELENG_4 through -current and also on sparc64
now. There may still be some issues with the auto attach/detach
code to sort out.

MFC after: 3 days

Temporarily desupport simultaneous target and initiator mode.

When the linux port changes were imported which split the
target command list to be separate from the initiator command
list and the handle format changed to encode a type in the handle
the implications to the function isp_handle_index (which only
the NetBSD/OpenBSD/FreeBSD ports use) were overlooked.

The fault is twofold: first, the index into the DMA maps
in isp_pci is wrong because a target command handle with
the type bit left in place caused a bad index (and panic)
into dma map. Secondly, the assumption of the array
of DMA maps in either PCS or SBUS attachment structures is
that there is a linear mapping between handle index and
DMA map index. This can no longer be true if there are
overlapping index spaces for initiator mode and target
mode commands.

These changes bandaid around the problem by forcing us
to not have simultaneous dual roles and doing the appropriate
masking to make sure things are indexed correctly. A longer
term fix is being devloped.

Don't derference a pointer before setting it.
Very Pointy Dunce Cap T o: me.
Submitted by: Marcel
MFC after: 3 days

Move bus_space_tag and bus_space_handle register access
tokens into the common isp_osinfo structure instead of being
in bus specific structures. This allows us to implement
a SYNC_REG MEMORYBARRIER call (using bus_space_barrier)
and also reduce the amount of bus specific wrapper structure
usages in isp_pci && isp_sbus.

MFC after: 3 days

Redo previous newbus related change to be kinder to
multi-release support.

o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@

Clean up some of the various platform and release specific dma tag
stuff so it is centralized in isp_freebsd.h.

Take out PCI posting flushed in qla2100/2200 register reads except for
2100s.

Change the remainder of the drivers for DMA'ing devices enabled in the
sparc64 GENERIC and the sound device drivers known working on sparc64
to use bus_get_dma_tag() to obtain the parent DMA tag so we can get rid
of the sparc64_root_dma_tag kludge eventually. Except for ath(4), sk(4),
stge(4) and ti(4) these changes are runtime tested (unless I booted up
the wrong kernels again...).

Implement ISP_RESET0 for PCI and SBUS attachments- isp_reset has
been modified to call ISP_RESET0 if it fails to do a reset. This
gives us a chance to disable interrupts.

Remove dependency on ispfw and firmware as modules.
Either they're there early and the ispfw sets have
registered themselves, or they're not.

The module dependency stuff isn't quite what we want
anyway. If the user doesn't want the load placed on
system memory by loading the firmware, they don't
specify it to be loaded (either by being linked in
or via being a module to be loaded and then hooked
in with firmware(9)). It doesn't then make sense to
then override what they want by pulling it in anyway.

This might be able to work if we were able to pull in
just exactly what we needed for the card we have- but
that's an optimization left for the future.

Add 4Gb (24XX) support and lay the foundation for a lot of new stuff.

More ispfwfunc definitions funnies which break pre-7.0 builds.

Some rearrangement of headers to minimize diffs with outside of
FreeBSD repository and to clean up the license header so as to
not pollute the license with file function.

Zero all mailbox structures prior to use (just in case). Change
the outgoing mailbox count for INIT_FIRMWARE to be correct.

Convert isp(4) and ispfw(4) to use firmware(9) to manage firmware
loading for the QLogic cards.

Because isp(4) exists before the root is mounted, it's not really
possible for us to use the kernel's linker to load modules directly
from disk- that's really too bad.

However, the this is still a net win in in that the firmware has
been split up on a per chip (and in some cases, functionality)
basis, so the amount of stuff loaded *can* be substantially less
than the 1.5MB of firmware images that ispfw now manages. That is,
each specific f/w set is now also built as a module. For example,
QLogic 2322 f/w is built as isp_2322.ko and Initiator/Target 1080
firmware is built as isp_1080_it.ko.

For compatibility purposes (i.e., to perturb folks the least), we
also still build all of the firmware as one ispfw.ko module.

This allows us to let 'ispfw_LOAD' keep on working in existing
loader.conf files. If you now want to strip this down to just
the firmware for your h/w, you can then change loader.conf to
load the f/w you specifically want.

We also still allow for ispfw to be statically built (e.g., for
PAE and sparc64).

Future changes will look at f/w unloading and also role switching
that then uses the kernel linker to load different ips f/w sets.
MFC after: 2 months

Some more gratuitous format and name changes.

Pull in some target mode changes from a private branch.
Pull in some more RELENG_4 compilation changes.

A lot of lines changed, but not much content change yet.

a) clean up some declaration stuff (i.e., make more modern with respect
to getting rid u_int for uint and so on).

b) Turn back on 64 bit DAC support. Cheeze it a bit in that we have two
DMA callback functions- one when we have bus_addr_t > 4 bits in width and
the other which should be normal. Even Cheezier in that we turn off setting
up DMA maps to be BUS_SPACE_MAXADDR if we're in ISP_TARGET_MODE. More work
on this in a week or so.

c) Tested under amd64 and 1MB DFLTPHYS, sparc64, i386 (PAE, but insufficient
memory to really test > 4GB). LINT check under amd64.

MFC after: 1 month

- Don't shift the clock frequency in MHz left by 8 before assigning it
to sbus_mdvec.dv_clock as sbus_mdvec.dv_clock is meant to be specified
in MHz. While this was a bug it shouldn't have affected FreeBSD/sparc64
as sbus_mdvec.dv_clock is used to limit the clock rate of chips when
a machine isn't able to support them at maximum speed which isn't the
case for sun4u machines.
- Remove the code that checks whether the clock frequency returned by
sbus_get_clockfreq() is 0 and falls back to 25MHz if it is as that's
already done in sbus(4).

Approved by: mjacob
MFC after: 3 days

First of several commits as this driver is dusted off and maybe brought
up to date. Principle changes for this reelase is to support 2K Port Login
firmware. This allows us to support the 2322 (and 2422 4Gb) cards which only
come with the 2K Port Login firmware. The 2322 should now work- but we don't
have firmware sets for it in ispfw (as the change to load 2K Port Login f/w
hasn't been made- that f/w is so big it has to be loaded in more than one
chunk).

Other changes are the beginnings of cleaning up some long standing target
mode issues. The next changes here will incorporate a lot of bug fixes
from others.

Finally, some copyright cleanup and attempts to make the parts of the
driver that are FreeBSD specific start conforming more to FreeBSD style.

MFC after: 1 month

- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a
subset ("compatible", "device_type", "model" and "name") of the standard
properties in drivers for devices on Open Firmware supported busses. The
standard properties "reg", "interrupts" und "address" are not covered by
this interface because they are only of interest in the respective bridge
code. There's a remaining standard property "status" which is unclear how
to support properly but which also isn't used in FreeBSD at present.
This ofw_bus kobj-interface allows to replace the various (ebus_get_node(),
ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type()
vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one.
This in turn allows to simplify and remove code-duplication in drivers for
devices that can hang off of more than one OFW supported bus.
- Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the
drivers for their children to use the ofw_bus kobj-interface. The IVAR-
interfaces of the Central, EBus and FHC are entirely replaced by this. The
PCI bus driver used its own kobj-interface and now also uses the ofw_bus
one. The IVARs special to the SBus, e.g. for retrieving the burst size,
remain.
Beware: this causes an ABI-breakage for modules of drivers which used the
IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be
recompiled.
The style-inconsistencies introduced in some of the bus drivers will be
fixed by tmm@ in a generic clean-up of the respective drivers later (he
requested to add the changes in the "new" style).
- Convert the powerpc MacIO bus driver and the drivers for its children to
use the ofw_bus kobj-interface. This invloves removing the IVARs related
to the "reg" property which were unused and a leftover from the NetBSD
origini of the code. There's no ABI-breakage caused by this because none
of these driver are currently built as modules.
There are other powerpc bus drivers which can be converted to the ofw_bus
kobj-interface, e.g. the PCI bus driver, which should be done together
with converting powerpc to use the OFW PCI code from sparc64.
- Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take
advantage of the ofw_bus kobj-interface and simplify them a bit.

Reviewed by: grehan, tmm
Approved by: re (scottl)
Discussed with: tmm
Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386

Add missing <sys/module.h> includes currently relying on nested include
in <sys/kernel.h>

Correct the boundary parameter to the bus_dma_tag_create() calls (it was
(1 << 24) - 2 instead of 1 << 24, which it was obviously intended to
be). This fixes SBus isp(4)s on sparc64 machines.

Report and testing: Marius Strobl <marius@alchemy.franken.de>

Convert callers to the new bus_alloc_resource_any(9) API.

Submitted by: Mark Santcroos <marks@ripe.net>
Reviewed by: imp, dfr, bde

Move the inclusion of <machine/ofw_machdep.h> after the inclusion of
<dev/ofw/openfirm.h> to allow the former to contain prototypes that
use types defined in the latter.

Reviewed by: mjacob@

Use __FBSDID().
Also some minor style cleanups.

s=include <ofw/=include <dev/ofw/= to reflect removal of -I$S/dev

Mega busdma API commit.

Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma. At the moment, this is used for the
asynchronous busdma_swi and callback mechanism. Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg. dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create(). The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms. The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by: tmm, gibbs

Back out M_* changes, per decision of the TRB.

Approved by: trb

Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.

Redo dma tag creation to correctly reflect the boundary and segment
limitations inherent to the isp1000 on SBus cards.

Frequency default should be '25' for 25MHz, not 25000000.

Through the PITA of endiannness, clock has to be MHz freq << 8.

Don't trust NVRAM on SBus cards.

Set a default initiator ID sensibly.

SBus/ISP now working, what with the change to sbus.c earlier today.

Make sure that if are in fact using 'full SMP', make the interrupt
flags include INTR_MPSAFE. Put the flags in a common place so that
both isp_sbus && isp_pci DTRT.

In isp_mbxdma setup, drop any locks prior to calling things like
bus_dmatag_create. This gets rid of these obnoxious WITNESS messages
about 'sleeping with locks held' blah blah blah blah blah.

Remove a couple of debugging lines.

'Support' for ISP SBus cards.

This code does not imply that SBus cards work yet. They hang for me.
But I can't netboot the latest snapshot on my ultra1e, and things
hang at bus_setup_intr time.

Since I'm offline for a while, I thought I'd toss this in in case somebody
else who has a bit better luck wants to fart around with it. Please try
and wait until I get back to check things in.