Revert r330897:

This was intended to be a non-functional change. It wasn't. The commit
message was thus wrong. In addition it broke arm, and merged crypto
related code.

Revert with prejudice.

This revert skips files touched in r316370 since that commit was since
MFCed. This revert also skips files that require $FreeBSD$ property
changes.

Thank you to those who helped me get out of this mess including but not
limited to gonzo, kevans, rgrimes.

Requested by: gjb (re)

Partial merge of the SPDX changes

These changes are incomplete but are making it difficult
to determine what other changes can/should be merged.

No objections from: pfg

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Resolve LINT linking issue by renaming ida_init() to ida_setup(). The
ida_init() symbol name is now taken for use by the LinuxKPI.

Reported by: emaste @
Discussed with: mav @

Remove MAXBSIZE use from drivers where it has nothing to do.

In some cases limits are just not needed, in others -- DFLTPHYS is the
right constant to use instead.

MFC after: 1 month

Rework the DMA handling in ida(4) and add locking to make this driver
MPSAFE.
- Preallocate a full set of QCBs during attach rather than allocating new
ones on demand to avoid allocations in the I/O path.
- Remove the explicit bus space tag/handle and use bus_*() on the
relevant 'struct resource' instead.
- Defer logical drive probing to an intrhook.
- Fix ida_detach() to detach and delete child devices (logical drives).
- Update the DMA handling to support EINPROGRESS by moving the work to
submit a mapped request into the bus_dma callback routine as well as
add support for freezing the queue when EINPROGRESS is encountered.

Tested by: Marco Steinbach coco executive-computing de

Convert a number of drivers to obtaining their parent DMA tag from their
PCI device attachment.

- There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
(bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
since r52045) but even recently added device drivers do this unnecessarily.
Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
Discussed with: jhb
- Also while at it, use __FBSDID.

o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@

Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64. The optimization is a trivial on recent machines.

Reviewed by: -arch (imp, marcel, dfr)

Whitespace cleanup.

Use BUS_PROBE_DEFAULT for pci probe return value

Modify ida_v3_done() to treat FIFO status of -1 as FIFO empty (0).
This is what ida_v4_done() does and seems to be necessary with some
firmware versions on v3 devices.

Reformat arguments bus_dma_tag_create().

Add missing <sys/module.h> includes

Convert callers to the new bus_alloc_resource_any(9) API.

Submitted by: Mark Santcroos <marks@ripe.net>
Reviewed by: imp, dfr, bde

style(9): single tab after #define.

Use PCIR_BAR(x) instead of PCIR_MAPS.

Glanced over by: imp, gibbs
Tested by: i386 LINT

Use __FBSDID().
Also some minor style cleanups.

Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.

Mega busdma API commit.

Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma. At the moment, this is used for the
asynchronous busdma_swi and callback mechanism. Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg. dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create(). The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms. The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by: tmm, gibbs

Use bioq_flush() to drain a bio queue with a specific error code.
Retain the mistake of not updating the devstat API for now.

Spell bioq_disksort() consistently with the remaining bioq_*().

#include <geom/geom_disk.h> where this is more appropriate.

Centralize the devstat handling for all GEOM disk device drivers
in geom_disk.c.

As a side effect this makes a lot of #include <sys/devicestat.h>
lines not needed and some biofinish() calls can be reduced to
biodone() again.

NO_GEOM cleanup:

Move ida driver to "struct disk *" centric api.

Retire major number 109.

Turn on interrupt-entropy harvesting for all/any mass storage devices
I could find. I have no doubt missed a couple.

Interrupt entropy harvesting is still conditional on the
kern.random.sys.harvest_interrupt sysctl.

Add crashdump support.

Tested by: ps

Add a flag value to the board identifiers, and use this to enable the
firmware for selected revisions of the controller.

Spotted by: Alexander Hausner <alex@hugo.bmg.gv.at>

Add PCI id for the RAID LC2 controller.

Pick up correct location for the DEC version of the chip, this
got broken in a previous commit.

Look at both the vendor and subvendor information when determining
whether this is a Smart Array. This fixes a problem where the driver
would incorrectly match a Dell RAID device.

Reviewed by: msmith

The DEC version of the Smart controller has its configuration information
stored at a different location in the PCI space, so adjust accordingly.

Also, when using more than two smart controllers in one machine, the
disks were assigned the wrong drive number; fix this as well.

Add code which actually checks for the NCR PCI id so it can be used.

Add PCI ID for NEC/Compaq controller.

Add PCI id for Compaq Smart Array 431 card.

Separate the struct bio related stuff out of <sys/buf.h> into
<sys/bio.h>.

<sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall
not be made a nested include according to bdes teachings on the
subject of nested includes.

Diskdrivers and similar stuff below specfs::strategy() should no
longer need to include <sys/buf.> unless they need caching of data.

Still a few bogus uses of struct buf to track down.

Repocopy by: peter

Add PCI identification for another SmartArray 4200, which identifies
itself as a DEC card instead of Compaq.

Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>

Add support for older EISA compaq cards and newer Smart 4200 cards.
Change disk names to `idad' to avoid naming conflicts with the controller,
and enable the new disk code to pick up the drives.

Tested by: david.w.james@bt.com (existing compaq support)
Reviewed by: msmith
Approved by: jordan

Removal of sys/device.h

- Move intrhook stuff into kernel.h
- Remove all occurrences of #device <device.h>
- Add kernel.h were necessary (nowhere)
- delete device.h

This file contained the structures for cfdata (old style config) and is no
longer used. It was included by most drivers.

It confuses the remote debugger as the definition of 'struct device' in
device.h is found before the one in bus_private.h.

$Id$ -> $FreeBSD$

Properly set the alignment argument to bus_dma_tag_create(). If we
don't care about the alignment, set it to 1, meaning single byte alignment.

Alter the behavior of sys/kern/subr_bus.c:device_print_child()

- device_print_child() either lets the BUS_PRINT_CHILD
method produce the entire device announcement message or
it prints "foo0: not found\n"

Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on
the previous behavior of device_print_child() (printing the
"foo0: <FooDevice 1.1>" bit of the announce message.)

Provide bus_print_child_header() and bus_print_child_footer()
to actually print the output for bus_generic_print_child().
These functions should be used whenever possible (unless you can
just use bus_generic_print_child())

The BUS_PRINT_CHILD method now returns int instead of void.

Modify everything else that defines or uses a BUS_PRINT_CHILD
method to comply with the above changes.

- Devices are 'on' a bus, not 'at' it.
- If a custom BUS_PRINT_CHILD method does the same thing
as bus_generic_print_child(), use bus_generic_print_child()
- Use device_get_nameunit() instead of both
device_get_name() and device_get_unit()
- All BUS_PRINT_CHILD methods return the number of
characters output.

Reviewed by: dfr, peter

Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire
files. config will leave the whole file out if configured to do so.

Compaq Smart RAID driver for -current. Based on the original ida.c
driver by Mark Dawson. This probably needs some work, but is stable
enough to boot a RAID-only configuration, and survive `make world'.