MFC r354742:

cxgbev(4): Catch up with the pciids in the PF driver.

Sponsored by: Chelsio Communications

MFC r317820 and r317837.

r317820:
cxgbe(4): Update the list of PCIe devices claimed by the driver. At
this point any board with a T6 should just work.

r317837:
cxgbe(4): Update the VF device ids too. This should have been part
of r317820.

Sponsored by: Chelsio Communications

MFC 313020: Fix a couple of issues with t4iov probe and attach.

- Check for Chelsio vendor ID in probe routines.
- Fail attach instead of faulting if pci_find_dbsf() doesn't find a
device.

PR: 216539
Sponsored by: Chelsio Communications

MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906,
305908,306062,306063,306137,306138,306206,306216,306273,306295,306301,
306465,309302:
Add support for adapters using the Terminator T6 ASIC.

305695:
cxgbe(4): Set up fl_starve_threshold2 accurately for T6.

305696:
cxgbe(4): Use correct macro for header length with T6 ASICs. This
affects the transmit of the VF driver only.

305699:
cxgbe(4): Update the pad_boundary calculation for T6, which has a
different range of boundaries.

305702:
cxgbe(4): Use smaller min/max bursts for fl descriptors with a T6.

305703:
cxgbe(4): Deal with the slightly different SGE_STAT_CFG in T6.

305713:
cxgbe(4): Add support for additional port types and link speeds.

305715:
cxgbe(4): Catch up with the rename of tlscaps -> cryptocaps. TLS is one
of the capabilities of the crypto engine in T6.

305827:
cxgbe(4): Use the interface's viid to calculate the PF/VF/VFValid fields
to use in tx work requests.

305852:
cxgbe(4): Attach to cards with the Terminator 6 ASIC. T6 cards will
come up as 't6nex' nexus devices with 'cc' ports hanging off them.

The T6 firmware and configuration files will be added as soon as they
are released. For now the driver will try to work with whatever
firmware and configuration is on the card's flash.

305906:
cxgbe/t4_tom: The SMAC entry for a VI is at a different location in the T6.

305908:
cxgbe/t4_tom: Update the active/passive open code to support T6. Data
path works as-is.

306062:
cxgbe(4): Show wcwr_stats for T6 cards.

306063:
cxgbe(4): Setup congestion response for T6 rx queues.

306137:
cxgbetool: Add T6 support to the SGE context decoder.

306138:
Fix typo.

306206:
cxgbe(4): Catch up with the different layout of WHOAMI in T6.

Note that the code moved below t4_prep_adapter() as part of this change
because now it needs a working chip_id().

306216:
cxgbe(4): Fix the output of the "tids" sysctl on T6.

306273:
cxgbe(4): Fix netmap with T6, which doesn't encapsulate SGE_EGR_UPDATE
message inside a FW_MSG. The base NIC already deals with updates in
either form.

306295:
cxgbe(4): Support SIOGIFXMEDIA so that ifconfig displays correct media
for 25Gbps and 100Gbps ports. This should have been part of r305713,
which is when the driver first started reporting extended media types.

306301:
cxgbe(4): Use the port's top speed to figure out whether it is "high
speed" or not (for the purpose of calculating the number of queues etc.)
This does the right thing for 25Gbps and 100Gbps ports.

306465:
cxgbe(4): Claim the T6 -DBG card.

309302:
cxgbe(4): Include firmware for T6 cards in the driver. Update all
firmwares to 1.16.12.0.

Sponsored by: Chelsio Communications

MFC 303859,305851: Fix a typo and some whitespace nits.

MFC 303205,303722,305032,305752: Create VF devices on Chelsio T4/T5 NICs.

303205:
Add a driver to create VF devices on Chelsio T4/T5 NICs.

Chelsio NICs are a bit unique compared to some other NICs in that they
expose different functionality on different physical functions. In
particular, PF4 is used to manage the NIC interfaces ('t4nex' and 't5nex').
However, PF4 is not able to create VF devices. Instead, VFs are only
supported by physical functions 0 through 3. This commit adds 't4iov'
and 't5iov' drivers that attach to PF0-3.

One extra wrinkle is that the iov devices cannot enable SR-IOV until the
firwmare has been initialized by the main PF4 driver. To handle this
case, a new t4_if kobj interface has been added to permit cross-calls
between the PF drivers. The PF4 driver notifies sibling drivers when it
is fully attached. It also requests sibling drivers to detach before it
detaches. Sibling drivers query the PF4 driver during their attach
routine to see if it is attached. If not, the sibling drivers defer
their attach actions until the PF4 driver informs them it is attached.

VF devices are associated with a single port on the NIC. VF devices
created from PF0 are associated with the first port on the NIC, VFs
from PF1 are associated with the second port, etc. VF devices can
only be created from a PF device that has an associated port. Thus,
on a 2-port card, VFs are only supported on PF0 and PF1.

303722:
Use the port device name for the iov device for Chelsio T4/T5 cards.

Chelsio T4/T5 adapters are multifunction cards. The main driver uses
physical function 4 (PF4). However, VF devices for SR-IOV are only
supported on physical functions 0 through 3, where PF0 creates VFs tied
to port 0, etc. The t4iov/t5iov driver was previously added to
create VF devices for ports that are present on each adapter. This
change uses the recently added pci_iov_attach_name() function to
name the character device in /dev/iov after the associated port on
the card (e.g. /dev/iov/cxl0 is used to create VFs that share the
cxl0 port). With this in place, mark the t4iov/t5iov devices quiet
to prevent them from cluttering dmesg.

305032:
Use device_verbose() to undo device_quiet() when detaching from t[45]iovX.

The device quiet flag is not automatically reset on detach, so it is
inherited by other device drivers (e.g. when switching a device driver
over to ppt for PCI pass through). Cope with this behavior by explicitly
marking the device verbose during detach so that the next driver can make
its own decision.

305752:
Remove explicit device_verbose() from the t4iov driver detach routine
now that this case is handled generically.

Sponsored by: Chelsio Communications