Revert r330897:

This was intended to be a non-functional change. It wasn't. The commit
message was thus wrong. In addition it broke arm, and merged crypto
related code.

Revert with prejudice.

This revert skips files touched in r316370 since that commit was since
MFCed. This revert also skips files that require $FreeBSD$ property
changes.

Thank you to those who helped me get out of this mess including but not
limited to gonzo, kevans, rgrimes.

Requested by: gjb (re)

Partial merge of the SPDX changes

These changes are incomplete but are making it difficult
to determine what other changes can/should be merged.

No objections from: pfg

MFC r311305 (by asomers):
Always null-terminate ccb_pathinq.(sim_vid|hba_vid|dev_name)

The sim_vid, hba_vid, and dev_name fields of struct ccb_pathinq are
fixed-length strings. AFAICT the only place they're read is in
sbin/camcontrol/camcontrol.c, which assumes they'll be null-terminated.
However, the kernel doesn't null-terminate them. A bunch of copy-pasted code
uses strncpy to write them, and doesn't guarantee null-termination. For at
least 4 drivers (mpr, mps, ciss, and hyperv), the hba_vid field actually
overflows. You can see the result by doing "camcontrol negotiate da0 -v".

This change null-terminates those fields everywhere they're set in the
kernel. It also shortens a few strings to ensure they'll fit within the
16-character field.

PR: 215474
Reported by: Coverity
CID: 1009997 1010000 1010001 1010002 1010003 1010004 1010005
CID: 1331519 1010006 1215097 1010007 1288967 1010008 1306000
CID: 1211924 1010009 1010010 1010011 1010012 1010013 1010014
CID: 1147190 1010017 1010016 1010018 1216435 1010020 1010021
CID: 1010022 1009666 1018185 1010023 1010025 1010026 1010027
CID: 1010028 1010029 1010030 1010031 1010033 1018186 1018187
CID: 1010035 1010036 1010042 1010041 1010040 1010039

MFC r313949: Remove dead mentions of CAM target mode APIs from drivers.

This makes grepping kernel for target mode implementation much easier.

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

sys/dev: minor spelling fixes.

Most affect comments, very few have user-visible effects.

Remove MAXBSIZE use from drivers where it has nothing to do.

In some cases limits are just not needed, in others -- DFLTPHYS is the
right constant to use instead.

MFC after: 1 month

Prevent overflow issues in timeout processing

Previously, any timeout value for which (timeout * hz) will overflow the
signed integer, will give weird results, since callout(9) routines will
convert negative values of ticks to '1'. For unsigned integer overflow we
will get sufficiently smaller timeout values than expected.

Switch from callout_reset, which requires conversion to int based ticks
to callout_reset_sbt to avoid this.

Also correct isci to correctly resolve ccb timeout.

This was based on the original work done by Eygene Ryabinkin
<rea@freebsd.org> back in 5 Aug 2011 which used a macro to help avoid
the overlow.

Differential Revision: https://reviews.freebsd.org/D1157
Reviewed by: mav, davide
MFC after: 1 month
Sponsored by: Multiplay

Don't destroy bus_dma maps created by bus_dmamem_alloc(). In some cases,
don't create a map before calling bus_dmamem_alloc() (such maps were
leaked). It is believed that the extra destroy of the map was generally
harmless since bus_dmamem_alloc() often uses special maps for which
bus_dmamap_destroy() is a no-op (e.g. on x86).

Reviewed by: scottl

Fix memory and references leak due to unfreed path.

Coverity CID: 1109815

Reform the busdma API so that new types may be added without modifying
every architecture's busdma_machdep.c. It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code. The MD busdma is then given a chance to do any final processing
in the complete() callback.

The cam changes unify the bus_dmamap_load* handling in cam drivers.

The arm and mips implementations are updated to track virtual
addresses for sync(). Previously this was done in a type specific
way. Now it is done in a generic way by recording the list of
virtuals in the map.

Submitted by: jeff (sponsored by EMC/Isilon)
Reviewed by: kan (previous version), scottl,
mjacob (isp(4), no objections for target mode changes)
Discussed with: ian (arm changes)
Tested by: marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)

Add locking to the bt(4) driver and mark it MPSAFE.
- Use device_printf() and device_get_unit() instead of storing the unit
number in the softc.
- Remove use of explicit bus space handles and tags.
- Return an errno value from bt_eisa_attach() if an error occurs rather
than -1.
- Use BUS_PROBE_DEFAULT rather than 0.

Tested by: no one

Correct double "the the"

Approved by: cperciva
MFC after: 3 days

Remove some always-true comparisons.

Submitted by: clang via rdivacky

Prepare for future integration between CAM and newbus. xpt_bus_register
now takes a device_t to be the parent of the bus that is being created.
Most SIMs have been updated with a reasonable argument, but a few exceptions
just pass NULL for now. This argument isn't used yet and the newbus
integration likely won't be ready until after 7.0-RELEASE.

Remove Giant from CAM. Drivers (SIMs) now register a mutex that CAM will
use to synchornize and protect all data objects that are used for that
SIM. Drivers that are not yet MPSAFE register Giant and operate as
usual. RIght now, no drivers are MPSAFE, though a few will be changed
in the coming week as this work settles down.

The driver API has changed, so all CAM drivers will need to be recompiled.
The userland API has not changed, so tools like camcontrol do not need to
be recompiled.

o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@

Add MODULE_DEPENDS for cam, pci, mca, eisa and isa where needed.

PR: 106543
MFC after: 3 days

2nd and final commit that moves us to CAM_NEW_TRAN_CODE
as the default.

Reviewed by multitudes.

Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64. The optimization is a trivial on recent machines.

Reviewed by: -arch (imp, marcel, dfr)

Start each of the license/copyright comments with /*-, minor shuffle of lines

Remove merge conflict that I didn't notice as it was in the middle of a
comment and thus compiled.

Submitted by: bde

Use __FBSDID().
Also some minor style cleanups.

Fixed wrong function names in the error message that was translated to
C in rev.1.32 so that it doesn't take 2 commits for all branches to fix
this message.

Mega busdma API commit.

Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma. At the moment, this is used for the
asynchronous busdma_swi and callback mechanism. Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg. dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create(). The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms. The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by: tmm, gibbs

Add /* FALLTHROUGH */
Remove break after return

Found by: FlexeLint

Bring back bus_dmasync_op_t. It is now a typedef to an int, though the
BUS_DMASYNC_ definitions remain as before. The does not change the ABI,
and reverts the API to be a bit more compatible and flexible. This has
survived a full 'make universe'.

Approved by: re (bmah)

I deserve a big pointy hat for having missed all those references
to bus_dmasync_op_t in my last commit.

Clean up argument comments for bus_dma_tag_create() calls.

Consolidate MIN/MAX macros into one place (param.h).

Submitted by: Hiten Pandya <hiten@unixdaemons.com>

Add some band-aid casts to quiet warnings. This driver still assumes
that sizeof(int) == sizeof(void *) == 4. However, it also seems that the
hardware assumes this.

Remove #if 0'ed abuse of NPCI

Use ANSI C string contatenation instead of a multi-line string literal.

Reported by: gcc30

Add code, imperfect though it may be, for CAM_NEW_TRAN_CODE compilation.

Turn on interrupt-entropy harvesting for all/any mass storage devices
I could find. I have no doubt missed a couple.

Interrupt entropy harvesting is still conditional on the
kern.random.sys.harvest_interrupt sysctl.

Classify all EISA cards with major firmware revions '2' as 742As.
This allows us to successfully attach early Storage Dimension cards.

Allocate mailboxes for the 742A bellow the 16MB limit. Although these
cards seem to be able to deal with all other types of data anywhere
in a 32bit address space, 24bit addresses are required for mailboxes.

bt_eisa.c:
Add device IDs for all Storage Dimension products I could
find from their web site.

Thanks to Ted Mittelstaed for loaning me the equipment to diagnose
and fix these problems.

Remove unneeded #include <machine/clock.h>

Fix typo (accessable --> accessible).

PR: 18588
Submitted by: Anatoly Vorobey <mellon@pobox.com>
Reviewed by: asmodai

Remove unneeded <sys/buf.h> includes.

Due to some interesting cpp tricks in lockmgr, the LINT kernel shrinks
by 924 bytes.

- Point the right bits at the new location of the bus front ends.
The 'bt' SCSI driver now lives in sys/dev/buslogic.

- Correct a few comments.

$Id$ -> $FreeBSD$

Properly set the alignment argument to bus_dma_tag_create(). If we
don't care about the alignment, set it to 1, meaning single byte alignment.

Poll for interrupts in bt_cmd in case they are masked. A completing
mailbox command will block the completion of an immediate command,
so we must service them for our command to succeed.

PR: 11799

Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.

Add a number of interrelated CAM feature enhancements and bug fixes.

NOTE: These changes will require recompilation of any userland
applications, like cdrecord, xmcd, etc., that use the CAM passthrough
interface. A make world is recommended.

camcontrol.[c8]:
- We now support two new commands, "tags" and "negotiate".

- The tags commands allows users to view the number of tagged
openings for a device as well as a number of other related
parameters, and it allows users to set tagged openings for
a device.

- The negotiate command allows users to enable and disable
disconnection and tagged queueing, set sync rates, offsets
and bus width. Note that not all of those features are
available for all controllers. Only the adv, ahc, and ncr
drivers fully support all of the features at this point.
Some cards do not allow the setting of sync rates, offsets and
the like, and some of the drivers don't have any facilities to
do so. Some drivers, like the adw driver, only support enabling
or disabling sync negotiation, but do not support setting sync
rates.

- new description in the camcontrol man page of how to format a disk
- cleanup of the camcontrol inquiry command
- add support in the 'devlist' command for skipping unconfigured devices if
-v was not specified on the command line.
- make use of the new base_transfer_speed in the path inquiry CCB.
- fix CCB bzero cases

cam_xpt.c, cam_sim.[ch], cam_ccb.h:

- new flags on many CCB function codes to designate whether they're
non-immediate, use a user-supplied CCB, and can only be passed from
userland programs via the xpt device. Use these flags in the transport
layer and pass driver to categorize CCBs.

- new flag in the transport layer device matching code for device nodes
that indicates whether a device is unconfigured

- bump the CAM version from 0x10 to 0x11

- Change the CAM ioctls to use the version as their group code, so we can
force users to recompile code even when the CCB size doesn't change.

- add + fill in a new value in the path inquiry CCB, base_transfer_speed.
Remove a corresponding field from the cam_sim structure, and add code to
every SIM to set this field to the proper value.

- Fix the set transfer settings code in the transport layer.

scsi_cd.c:

- make some variables volatile instead of just casting them in various
places
- fix a race condition in the changer code
- attach unless we get a "logical unit not supported" error. This should
fix all of the cases where people have devices that return weird errors
when they don't have media in the drive.

scsi_da.c:

- attach unless we get a "logical unit not supported" error

scsi_pass.c:

- for immediate CCBs, just malloc a CCB to send the user request in. This
gets rid of the 'held' count problem in camcontrol tags.

scsi_pass.h:

- change the CAM ioctls to use the CAM version as their group code.

adv driver:

- Allow changing the sync rate and offset separately.

adw driver

- Allow changing the sync rate and offset separately.

aha driver:

- Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs.

ahc driver:

- Allow setting offset and sync rate separately

bt driver:

- Don't return CAM_REQ_CMP for SET_TRAN_SETTINGS CCBs.

NCR driver:

- Fix the ultra/ultra 2 negotiation bug
- allow setting both the sync rate and offset separately

Other HBA drivers:
- Put code in to set the base_transfer_speed field for
XPT_GET_TRAN_SETTINGS CCBs.

Reviewed by: gibbs, mjacob (isp), imp (aha)

Remove bt_softcs. It is no longer used.

bt.c:
Simplify some inline functions.
btreg.h:
Correct a comment.

Check bus_setup_intr() as a seatbelt...

Implement an EISA new-bus framework. The old driver probe mechanism
had a quirk that made a shim rather hard to implement properly and it was
just easier to convert the drivers in one go. The changes to the
buslogic driver go beyond just this - the whole driver was new-bus'ed
including pci and isa. I have only tested the EISA part of this so far.

Submitted by: Doug Rabson <dfr@nlsystems.com>

Improve bt_cmd() so that it has a better chance of working when there
are pending I/O transactions. It is not clear that is works 100% of
the time under SMP, but since the bt_cmds() that are sent after other
CPUs are started are not critical, the driver will function until I
can figure out why this is the case.

Add bt_port_probe() a routine shared by the EISA and ISA probe code to
determine IRQ and DRQ information.

Fix a bug that would cause us to attempt to retrieve extended sync
rate information on cards/firmware revs that do not support that command.

Remove unsued variable.

If we are not transfering any data, use a non S/G ccb type that doesn't
return residual information. It seems that some firmware revisions dislike
S/G ccbs with 0 length S/G lists.

Correct bt_cmd() so that we always honor command status that was latched
by our interrupt routine while polling for completion..

Examine all occurrences of sprintf(), strcat(), and str[n]cpy()
for possible buffer overflow problems. Replaced most sprintf()'s
with snprintf(); for others cases, added terminating NUL bytes where
appropriate, replaced constants like "16" with sizeof(), etc.

These changes include several bug fixes, but most changes are for
maintainability's sake. Any instance where it wasn't "immediately
obvious" that a buffer overflow could not occur was made safer.

Reviewed by: Bruce Evans <bde@zeta.org.au>
Reviewed by: Matthew Dillon <dillon@apollo.backplane.com>
Reviewed by: Mike Spengler <mks@networkcs.com>

Move a diagnostic behind "if (bootverbose)".

Noop Commit - Change was in last revision.

If the next available mailbox is not in the free state, print a warning
and handle the condition as a temporary resource shortage. The condition
should never happen, but we shouldn't panic since recovery is possible.

Fix probes when a port address is specified.

Do not disable the ISA compatibility window if it is the same value as
that set for our PCI IO address space. This can happen on the BT-946.

-Wunused cleanup.

Submitted by: Poul-Henning Kamp <phk@freebsd.org>

Honor CAM_TAG_ACTION_NONE.

Hook up ahapoll so that dumps, synchronize cache commands or any other
command that comes in through xpt_polled_action works correctly.

On wide cards with firmware revisions < 5.06L, we have to infer that
wide targets are in fact running wide since the "setup info" command
for these revisions does not fill out the wide negotiation bits.

Use %p with (void *) casts to print pointers with printf.

Fix printf format bugs.

Mylex/Buslogic MultiMaster SCSI-Host Adapter Driver for CAM.