Revert r330897:

This was intended to be a non-functional change. It wasn't. The commit
message was thus wrong. In addition it broke arm, and merged crypto
related code.

Revert with prejudice.

This revert skips files touched in r316370 since that commit was since
MFCed. This revert also skips files that require $FreeBSD$ property
changes.

Thank you to those who helped me get out of this mess including but not
limited to gonzo, kevans, rgrimes.

Requested by: gjb (re)

Partial merge of the SPDX changes

These changes are incomplete but are making it difficult
to determine what other changes can/should be merged.

No objections from: pfg

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

sys/dev: use our nitems() macro when it is avaliable through param.h.

No functional change, only trivial cases are done in this sweep,
Drivers that can get further enhancements will be done independently.

Discussed in: freebsd-current

Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere().

Most calls to bus_alloc_resource() use "anywhere" as the range, with a given
count. Migrate these to use the new bus_alloc_resource_anywhere() API.

Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D5370

Fix build of aha(4).

Submitted by: delphij

Add locking to the aha(4) driver and mark it MPSAFE.
- Remove use of explicit bus space handles and tags.

Tested by: no one

Pass bus_get_dma_tag() into the first argument of bus_dma_create_tag()
rather than NULL.

o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@

Add MODULE_DEPENDS for cam, pci, mca, eisa and isa where needed.

PR: 106543
MFC after: 3 days

Add explicit dependency on cam. This is necessary when both aha.ko and
cam.ko are modules so that aha.ko's undefined symbols can be satisfied by
cam.ko.

Sumitted by: nork
Reviewed by: scottl

Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64. The optimization is a trivial on recent machines.

Reviewed by: -arch (imp, marcel, dfr)

Simplify aha resource management, and fix a few bugs in unwinding
error cases.

nits

Final attempt to make aha 1542A working. If not, oh well, I don't
have the card and no way to reproduce problems. We do this by
applying the workaround to firmware revsion 0.

PR: 14334

Start each of the license/copyright comments with /*-, minor shuffle of lines

Various whitespace nits.

Noticed by: njl

Don't use aha after calling aha_free.

Convert callers to the new bus_alloc_resource_any(9) API.

Submitted by: Mark Santcroos <marks@ripe.net>
Reviewed by: imp, dfr, bde

Save the device so we can do a device_printf.
Use this in preference to aha_name.
Remove aha_name function and #define it to device_get_unitname()
Minor indentation tweaks resulting therefrom

Move 'guessing' code from the probe into the identify routine where it more
properly belongs.

Add my copyright to aha_isa.c to make it crystal clear its license

Let bus space manage softc.

Make this driver a little more style(9) compliant

Use __FBSDID().
Also some minor style cleanups.

Mega busdma API commit.

Add two new arguments to bus_dma_tag_create(): lockfunc and lockfuncarg.
Lockfunc allows a driver to provide a function for managing its locking
semantics while using busdma. At the moment, this is used for the
asynchronous busdma_swi and callback mechanism. Two lockfunc implementations
are provided: busdma_lock_mutex() performs standard mutex operations on the
mutex that is specified from lockfuncarg. dftl_lock() is a panic
implementation and is defaulted to when NULL, NULL are passed to
bus_dma_tag_create(). The only time that NULL, NULL should ever be used is
when the driver ensures that bus_dmamap_load() will not be deferred.
Drivers that do not provide their own locking can pass
busdma_lock_mutex,&Giant args in order to preserve the former behaviour.

sparc64 and powerpc do not provide real busdma_swi functions, so this is
largely a noop on those platforms. The busdma_swi on is64 is not properly
locked yet, so warnings will be emitted on this platform when busdma
callback deferrals happen.

If anyone gets panics or warnings from dflt_lock() being called, please
let me know right away.

Reviewed by: tmm, gibbs

Clean up argument comments for bus_dma_tag_create() calls.

Change BUS_SPACE_UNRESTRICTED (~0ul) to plain ~0 when used in the
'int nsegments' argument to bus_dma_tag_create(). ~0ul does not fit in
an int on machines with 64 bit longs.

Turn on interrupt-entropy harvesting for all/any mass storage devices
I could find. I have no doubt missed a couple.

Interrupt entropy harvesting is still conditional on the
kern.random.sys.harvest_interrupt sysctl.

More pnpids.

Fix plug and play support:
o Cut out the probed stuff. We no longer need it since newbus implicitly
checks for this (likely bt can be changed as well in this way).
o Add preliminary support for unload. Untested because aha doesn't yet
support identify and there are some interactions with PnP that I've
not yet worked out.

With this I can boot the AHA-1542CP FW F.0. All the aha resources
appear to be picked up via pnp now.

* Add struct resource_list* argument to resource_list_alloc and
resource_list_release. This removes the dependancy on the
layout of ivars.

* Move set_resource, get_resource and delete_resource from
isa_if.m to bus_if.m.

* Simplify driver code by providing wrappers to those methods:

bus_set_resource(dev, type, rid, start, count);
bus_get_resource(dev, type, rid, startp, countp);
bus_get_resource_start(dev, type, rid);
bus_get_resource_count(dev, type, rid);
bus_delete_resource(dev, type, rid);

* Delete isa_get_rsrc and use bus_get_resource_start instead.

* Fix a stupid typo in isa_alloc_resource reported by Takahashi
Yoshihiro <nyan@FreeBSD.org>.

* Print a diagnostic message if we can't assign resources to a PnP
device.

* Change device_print_prettyname() so that it doesn't print
"(no driver assigned)-1" for anonymous devices.

Kill unused includes

Use rmand_get_bus{tag,handle} rather than hard wiring things to
I386_BUS_SPACE_IO. Compiles now on the Alpha, but likely will not
work due to bus space address <-> virtual address mapping bogons that
work for i386 but not alpha.

Newbusification of aha. dfr sent me the first cut, and I made it
work. Be more verbose when one cannot allocate IRQ, et al since this
is a common configuration problem. The cards have the IRQ soft wired
into their BIOS and do not try to do collision detection. This can
cause problems when this IRQ is the same as another card/device.

The PNP hasn't been tested. My PNP board is in a deployed system.
I'll sneak in testing of it sometime later. I've been able to mount
the 3.3R cdrom that arrived today and access files off it.

Submitted by: dfr

Move aha driver to dev/aha like the other drivers.

Code relocation only, no code changes.

Stub out the old pnp code till these are converted so GENERIC builds again.

$Id$ -> $FreeBSD$

Properly set the alignment argument to bus_dma_tag_create(). If we
don't care about the alignment, set it to 1, meaning single byte alignment.

Use haveseen_ioport() which is now connected up to the resource manager.

Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition. eisa, isapnp and pccard* are
not yet using the new resource manager. Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
ATA driver to the Alpha. Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by: core

o enable plug and play support for the aha driver. Given the cumbersome
pnp system in freebsd, I'm not sure how useful this will be, but my
1542CP seems to work well in plug and play mode and does seem to
probe correctly at all the oddball addresses/irq/drqs that I tried.
[[
I was unable to get /kernel.conf or /kernel.config to read in, so
I wasn't able to verify that this method of userconfig works. that's
one thing that makes pnp so hard to use in the current scheme.
Pointers to the right new way of doing this accepted.
]]
o Add some kludges to maybe bring support for 1540A/1542A into the
driver. Since I have no 154xA cards, and the only person I know
that has them hasn't given me feedback, I'm making this commit
blind.
o Honor unit numbers that are in the config file now. This allows one
to hard wire the unit numbers (and have high unit numbers for plug
and pray devices, which can't seem to be hardwired) and have the
cards not migrate from aha1 -> aha0 should aha0 go on the fritz. I
didn't verify that hard wired scsi busses would work, but did verify
that hard wired aha addresses did work to a limited extent. Both
aha0 and aha1 must be hardwired, or when the card that was in aha0
goes away, the probe for aha0 might pick up the card that otherwise
would have been aha1.

Fix probes when a port address is specified.

Fix breakage introduced by last patch. bde has added CC_QUIET flag to
hasseen_isadev so this will be less noisy when conflicts do exist.
Also eliminate redundant warnings about conflicts.

Requested by: bde
Reviewed by: gibbs

Fix conficts in probe:
o For bt and aha only probe the one I/O range if a specific I/O is specified
in the config file.
o Don't even try to probe I/O ranges that have been seen already.
o If we conflict with an IRQ or DRQ, then fail the probe.

Requested by: bde, gibbs
Approved by: jkh

Removed unused include of "ioconf.h" again. The CAM changes made ioconf.h
empty but regressed to including it here.

Adaptec 154X SCSI-Host Adapter driver for CAM.

Submitted by: Warner Losh <imp@village.org>