#
331722 |
|
29-Mar-2018 |
eadler |
Revert r330897:
This was intended to be a non-functional change. It wasn't. The commit message was thus wrong. In addition it broke arm, and merged crypto related code.
Revert with prejudice.
This revert skips files touched in r316370 since that commit was since MFCed. This revert also skips files that require $FreeBSD$ property changes.
Thank you to those who helped me get out of this mess including but not limited to gonzo, kevans, rgrimes.
Requested by: gjb (re)
|
#
330897 |
|
14-Mar-2018 |
eadler |
Partial merge of the SPDX changes
These changes are incomplete but are making it difficult to determine what other changes can/should be merged.
No objections from: pfg
|
#
302408 |
|
07-Jul-2016 |
gjb |
Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle. Prune svn:mergeinfo from the new branch, as nothing has been merged here.
Additional commits post-branch will follow.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
284539 |
|
18-Jun-2015 |
neel |
Restructure memory allocation in bhyve to support "devmem".
devmem is used to represent MMIO devices like the boot ROM or a VESA framebuffer where doing a trap-and-emulate for every access is impractical. devmem is a hybrid of system memory (sysmem) and emulated device models.
devmem is mapped in the guest address space via nested page tables similar to sysmem. However the address range where devmem is mapped may be changed by the guest at runtime (e.g. by reprogramming a PCI BAR). Also devmem is usually mapped RO or RW as compared to RWX mappings for sysmem.
Each devmem segment is named (e.g. "bootrom") and this name is used to create a device node for the devmem segment (e.g. /dev/vmm/testvm.bootrom). The device node supports mmap(2) and this decouples the host mapping of devmem from its mapping in the guest address space (which can change).
Reviewed by: tychon Discussed with: grehan Differential Revision: https://reviews.freebsd.org/D2762 MFC after: 4 weeks
|
#
256072 |
|
05-Oct-2013 |
neel |
Merge projects/bhyve_npt_pmap into head.
Make the amd64/pmap code aware of nested page table mappings used by bhyve guests. This allows bhyve to associate each guest with its own vmspace and deal with nested page faults in the context of that vmspace. This also enables features like accessed/dirty bit tracking, swapping to disk and transparent superpage promotions of guest memory.
Guest vmspace: Each bhyve guest has a unique vmspace to represent the physical memory allocated to the guest. Each memory segment allocated by the guest is mapped into the guest's address space via the 'vmspace->vm_map' and is backed by an object of type OBJT_DEFAULT.
pmap types: The amd64/pmap now understands two types of pmaps: PT_X86 and PT_EPT.
The PT_X86 pmap type is used by the vmspace associated with the host kernel as well as user processes executing on the host. The PT_EPT pmap is used by the vmspace associated with a bhyve guest.
Page Table Entries: The EPT page table entries as mostly similar in functionality to regular page table entries although there are some differences in terms of what bits are used to express that functionality. For e.g. the dirty bit is represented by bit 9 in the nested PTE as opposed to bit 6 in the regular x86 PTE. Therefore the bitmask representing the dirty bit is now computed at runtime based on the type of the pmap. Thus PG_M that was previously a macro now becomes a local variable that is initialized at runtime using 'pmap_modified_bit(pmap)'.
An additional wrinkle associated with EPT mappings is that older Intel processors don't have hardware support for tracking accessed/dirty bits in the PTE. This means that the amd64/pmap code needs to emulate these bits to provide proper accounting to the VM subsystem. This is achieved by using the following mapping for EPT entries that need emulation of A/D bits: Bit Position Interpreted By PG_V 52 software (accessed bit emulation handler) PG_RW 53 software (dirty bit emulation handler) PG_A 0 hardware (aka EPT_PG_RD) PG_M 1 hardware (aka EPT_PG_WR)
The idea to use the mapping listed above for A/D bit emulation came from Alan Cox (alc@).
The final difference with respect to x86 PTEs is that some EPT implementations do not support superpage mappings. This is recorded in the 'pm_flags' field of the pmap.
TLB invalidation: The amd64/pmap code has a number of ways to do invalidation of mappings that may be cached in the TLB: single page, multiple pages in a range or the entire TLB. All of these funnel into a single EPT invalidation routine called 'pmap_invalidate_ept()'. This routine bumps up the EPT generation number and sends an IPI to the host cpus that are executing the guest's vcpus. On a subsequent entry into the guest it will detect that the EPT has changed and invalidate the mappings from the TLB.
Guest memory access: Since the guest memory is no longer wired we need to hold the host physical page that backs the guest physical page before we can access it. The helper functions 'vm_gpa_hold()/vm_gpa_release()' are available for this purpose.
PCI passthru: Guest's with PCI passthru devices will wire the entire guest physical address space. The MMIO BAR associated with the passthru device is backed by a vm_object of type OBJT_SG. An IOMMU domain is created only for guest's that have one or more PCI passthru devices attached to them.
Limitations: There isn't a way to map a guest physical page without execute permissions. This is because the amd64/pmap code interprets the guest physical mappings as user mappings since they are numerically below VM_MAXUSER_ADDRESS. Since PG_U shares the same bit position as EPT_PG_EXECUTE all guest mappings become automatically executable.
Thanks to Alan Cox and Konstantin Belousov for their rigorous code reviews as well as their support and encouragement.
Thanks for John Baldwin for reviewing the use of OBJT_SG as the backing object for pci passthru mmio regions.
Special thanks to Peter Holm for testing the patch on short notice.
Approved by: re Discussed with: grehan Reviewed by: alc, kib Tested by: pho
|
#
245678 |
|
20-Jan-2013 |
neel |
Add svn properties to the recently merged bhyve source files.
The pre-commit hook will not allow any commits without the svn:keywords property in head.
|
#
245652 |
|
19-Jan-2013 |
neel |
Merge projects/bhyve to head.
'bhyve' was developed by grehan@ and myself at NetApp (thanks!).
Special thanks to Peter Snyder, Joe Caradonna and Michael Dexter for their support and encouragement.
Obtained from: NetApp
|
#
242163 |
|
26-Oct-2012 |
grehan |
Set the valid field of the newly allocated field as all other vm page allocators do. This fixes a panic when a virtio block device is mounted as root, with the host system dying in vm_page_dirty with invalid bits.
Reviewed by: neel Obtained from: NetApp
|
#
241362 |
|
08-Oct-2012 |
neel |
Allocate memory pages for the guest from the host's free page queue.
It is no longer necessary to hard-partition the memory between the host and guests at boot time.
|
#
241178 |
|
04-Oct-2012 |
neel |
Change vm_malloc() to map pages in the guest physical address space in 4KB chunks. This breaks the assumption that the entire memory segment is contiguously allocated in the host physical address space.
This also paves the way to satisfy the 4KB page allocations by requesting free pages from the VM subsystem as opposed to hard-partitioning host memory at boot time.
|
#
239700 |
|
25-Aug-2012 |
grehan |
Add sysctls to display the total and free amount of hard-wired mem for VMs # sysctl hw.vmm hw.vmm.mem_free: 2145386496 hw.vmm.mem_total: 2145386496
Submitted by: Takeshi HASEGAWA hasegaw at gmail com
|
#
221940 |
|
15-May-2011 |
jhb |
Enable handling of 1GB pages in the direct map since HEAD supports those.
Submitted by: neel
|
#
221914 |
|
14-May-2011 |
jhb |
First cut at porting the kernel portions of 221828 and 221905 from the BHyVe reference branch to HEAD.
|
#
221828 |
|
13-May-2011 |
grehan |
Import of bhyve hypervisor and utilities, part 1. vmm.ko - kernel module for VT-x, VT-d and hypervisor control bhyve - user-space sequencer and i/o emulation vmmctl - dump of hypervisor register state libvmm - front-end to vmm.ko chardev interface
bhyve was designed and implemented by Neel Natu.
Thanks to the following folk from NetApp who helped to make this available: Joe CaraDonna Peter Snyder Jeff Heller Sandeep Mann Steve Miller Brian Pawlowski
|