MFC r330806-r330815, r330837, r330864, r330883

pc98 changes associated with the named commits are also included in this
commit, despite not having been made with the original commits due to its
removal in head.

r330806:
Minor cosmetic changes.

Make sure { on the same line as struct for all struct *devdesc. Move
some type definitions to next to the dv_type define, since that's what
sets the d_type.

r330807:
We can't use d_opendata for blkio storage.

open_disk uses d_opendata for it's own purpse. We can't store blkio
there. Fortunately, blkio is stored elsewhere and we never actually
retrieve blkio from d_opendata. Eliminate it as a source of confusion.
Eliminate all stores of d_opendata in efi since this layer doesn't own
that field.

r330808:
Make struct libi386_devdesc match the struct devdesc better

Move data to top and call it d_opendata.

r330809:
Use the actual struct devdesc at the start of all *_devdesc structs

The current system is fragile and requires very careful layout of all
*_devdesc structures. It also makes it hard to change the base
devdesc. Take a page from CAM and put the 'header' in all the derived
classes and adjust the code to match.

For OFW, move the iHandle h_handle out of a slot conflicting with
d_opendata. Due to quirks in the alignment rules, this worked.
However changing the code to use d_opendata storage now that it's a
pointer is hard, so just have a separate field for it.

All other cleanups were to make the *_devdesc structures match where
they'd taken some liberties that were none-the-less compatible enough
to work.

r330810:
Remove d_type from devdesc. It's not needed as we can fetch it from
d_dev->dv_type when we need it.

r330811:
GC unused routines.

Sponsored by: Netflix

r330812:
Use the one-line-per-file pattern here, and sort the file names.

Sponsored by: Netflix

r330813:
Move the env convenience routines out of boot1.c.

These routines are more generally useful. Even though boot1 is on its
way out, it's better to make these common during the transition than
copy them.

r330814:
Star BootCurrent entry when booting.

Sponsored by: Netflix

r330815:
Print the load and device path as well as BootCurrent and BootOrder

Sponsored by: Netflix

r330837:
biosdisk.c should not set d_opendata.

Same as 330807, d_opendata is owned by open_disk and we should not
set it.

M stand/i386/libi386/biosdisk.c

r330864:
Prefer uintXX_t to u_intXX_t

A foolish consistency is the hobgoblin of little minds, adored by
little statesmen and philosophers and divines. With consistency a
great soul has simply nothing to do. -- Ralph Waldo Emerson

r330883:
Fix typo that misteriously passes compilation.

MFC r329190, r329315, r330131: metadata load file unification

r329190: Unify metadata load files for arm, mips, powerpc, sparc64

Summary:
All metadata.c files are very similar, with only trivial changes. Unify them
into a single common file, with minor special-casing where needed.

r329315: stand: Fix ubldr after r329190

metadata load files were consolidated in r329190, and these relocation fixup
bits were inadvertently dropped in the process. Re-add them to fix boot with
ubldr.

r330131: Fix module loading on arm after the metadata.c unification in
r329190. Arm modules need an additional address fixup not needed by other
platforms.

MFC r325834,r325997,326502: Move sys/boot to stand/

This is effectively a direct commit to stable/11, due to differences between
stable/11 and head. Changes to DTS in sys/boot/fdt/dts were often
accompanied by kernel changes. Many of these were also risc-v updates that
likely had many more dependencies to MFC.

Because of this, sys/boot/fdt/dts remains as-is while everything else in
sys/boot relocates to stand/.

r325834: Move sys/boot to stand. Fix all references to new location

r325997: Remove empty directories.

r326502: Document the sys/boot -> stand move in hier.7 and the top-level README.

MFC r302465:

Remove extra 0x before %p format strings introduced by r296182

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

These changes attempt to put things in order before the introduction of MIPS
ubldr.

The changes are mostly dealing with removing unnecessary casts from the U-Boot
API (we're passing only pointers, no obvious reason to cast them to uint32_t),
cleaning up some compiler warnings and using the proper printf format
specifiers in order to be able to compile cleanly for both 32-bit and 64-bit
MIPS targets.

Reviewed by: imp
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5312

An ARM kernel can be loaded at any 2MB boundary, make ubldr aware of that.

Previously, ubldr would use the virtual addresses in the elf headers by
masking off the high bits and assuming the result was a physical address
where the kernel should be loaded. That would sometimes discard
significant bits of the physical address, but the effects of that were
undone by archsw copy code that would find a large block of memory and
apply an offset to the source/dest copy addresses. The result was that
things were loaded at a different physical address than requested by the
higher code layers, but that worked because other adjustments were applied
later (such as when jumping to the entry point). Very confusing, and
somewhat fragile.

Now the archsw copy routines are just simple copies, and instead
archsw.arch_loadaddr is implemented to choose a load address. The new
routine uses some of the code from the old offset-translation routine to
find the largest block of ram, but it excludes ubldr itself from that
range, and also excludes If ubldr splits the largest block of ram in
two, the kernel is loaded into the bottom of whichever resulting block is
larger.

As part of eliminating ubldr itself from the ram ranges, export the heap
start/end addresses in a pair of new global variables.

This change means that the virtual addresses in the arm kernel elf headers
now have no meaning at all, except for the entry point address. There is
an implicit assumption that the entry point is in the first text page, and
that the address in the the header can be turned into an offset by masking
it with PAGE_MASK. In the future we can link all arm kernels at a virtual
address of 0xC0000000 with no need to use any low-order part of the
address to influence where in ram the kernel gets loaded.

Print kernel args as late as possible before jumping into kernel.

Print kernel args when booting the kernel.

Determine kernel load address dynamically from u-boot memory map.

The generic ELF loading code maps the kernel into low memory
by subtracting KERN_BASE. So the copyin/copyout/readin functions
are always called with low addresses. This code finds the largest
DRAM block from the U-Boot memory map and adds that base to
the addresses.

In particular, this fixes ubldr on AM3358, which has DRAM
mapped to 0x80000000 at power-on.

Move U-Boot compatibility library to WARNS=2 level.

style(9) & style.Makefile(9)

Reviewed by: raj

MFp4 (e500):

Add support for U-Boot. This uses the U-Boot API as developed by
Rafal and which is (will be) part of U-Boot 1.3.2 and later.

Credits to: raj@