MFC r304572 (by bz):
Remove the kernel optoion for IPSEC_FILTERTUNNEL, which was deprecated
more than 7 years ago in favour of a sysctl in r192648.

MFC r305122:
Remove redundant sanity checks from ipsec[46]_common_input_cb().

This check already has been done in the each protocol callback.

MFC r309144,309174,309201 (by fabient):
IPsec RFC6479 support for replay window sizes up to 2^32 - 32 packets.

Since the previous algorithm, based on bit shifting, does not scale
with large replay windows, the algorithm used here is based on
RFC 6479: IPsec Anti-Replay Algorithm without Bit Shifting.
The replay window will be fast to be updated, but will cost as many bits
in RAM as its size.

The previous implementation did not provide a lock on the replay window,
which may lead to replay issues.

Obtained from: emeric.poupon@stormshield.eu
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D8468

MFC r309143,309146 (by fabient):
In a dual processor system (2*6 cores) during IPSec throughput tests,
we see a lot of contention on the arc4 lock, used to generate the IV
of the ESP output packets.

The idea of this patch is to split this mutex in order to reduce the
contention on this lock.

Update r309143 to prevent false sharing.

Reviewed by: delphij, markm, ache
Approved by: so
Obtained from: emeric.poupon@stormshield.eu
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D8130

MFC r313330:
Merge projects/ipsec into head/.

Small summary
-------------

o Almost all IPsec releated code was moved into sys/netipsec.
o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel
option IPSEC_SUPPORT added. It enables support for loading
and unloading of ipsec.ko and tcpmd5.ko kernel modules.
o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by
default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type
support was removed. Added TCP/UDP checksum handling for
inbound packets that were decapsulated by transport mode SAs.
setkey(8) modified to show run-time NAT-T configuration of SA.
o New network pseudo interface if_ipsec(4) added. For now it is
build as part of ipsec.ko module (or with IPSEC kernel).
It implements IPsec virtual tunnels to create route-based VPNs.
o The network stack now invokes IPsec functions using special
methods. The only one header file <netipsec/ipsec_support.h>
should be included to declare all the needed things to work
with IPsec.
o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed.
Now these protocols are handled directly via IPsec methods.
o TCP_SIGNATURE support was reworked to be more close to RFC.
o PF_KEY SADB was reworked:
- now all security associations stored in the single SPI namespace,
and all SAs MUST have unique SPI.
- several hash tables added to speed up lookups in SADB.
- SADB now uses rmlock to protect access, and concurrent threads
can do SA lookups in the same time.
- many PF_KEY message handlers were reworked to reflect changes
in SADB.
- SADB_UPDATE message was extended to support new PF_KEY headers:
SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They
can be used by IKE daemon to change SA addresses.
o ipsecrequest and secpolicy structures were cardinally changed to
avoid locking protection for ipsecrequest. Now we support
only limited number (4) of bundled SAs, but they are supported
for both INET and INET6.
o INPCB security policy cache was introduced. Each PCB now caches
used security policies to avoid SP lookup for each packet.
o For inbound security policies added the mode, when the kernel does
check for full history of applied IPsec transforms.
o References counting rules for security policies and security
associations were changed. The proper SA locking added into xform
code.
o xform code was also changed. Now it is possible to unregister xforms.
tdb_xxx structures were changed and renamed to reflect changes in
SADB/SPDB, and changed rules for locking and refcounting.

Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9352

MFC r313331:
Add removed headers into the ObsoleteFiles.inc.

MFC r313561 (by glebius):
Move tcp_fields_to_net() static inline into tcp_var.h, just below its
friend tcp_fields_to_host(). There is third party code that also uses
this inline.

MFC r313697:
Remove IPsec related PCB code from SCTP.

The inpcb structure has inp_sp pointer that is initialized by
ipsec_init_pcbpolicy() function. This pointer keeps strorage for IPsec
security policies associated with a specific socket.
An application can use IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket
options to configure these security policies. Then ip[6]_output()
uses inpcb pointer to specify that an outgoing packet is associated
with some socket. And IPSEC_OUTPUT() method can use a security policy
stored in the inp_sp. For inbound packet the protocol-specific input
routine uses IPSEC_CHECK_POLICY() method to check that a packet conforms
to inbound security policy configured in the inpcb.

SCTP protocol doesn't specify inpcb for ip[6]_output() when it sends
packets. Thus IPSEC_OUTPUT() method does not consider such packets as
associated with some socket and can not apply security policies
from inpcb, even if they are configured. Since IPSEC_CHECK_POLICY()
method is called from protocol-specific input routine, it can specify
inpcb pointer and associated with socket inbound policy will be
checked. But there are two problems:
1. Such check is asymmetric, becasue we can not apply security policy
from inpcb for outgoing packet.
2. IPSEC_CHECK_POLICY() expects that caller holds INPCB lock and
access to inp_sp is protected. But for SCTP this is not correct,
becasue SCTP uses own locks to protect inpcb.

To fix these problems remove IPsec related PCB code from SCTP.
This imply that IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket options
will be not applicable to SCTP sockets. To be able correctly check
inbound security policies for SCTP, mark its protocol header with
the PR_LASTHDR flag.

Differential Revision: https://reviews.freebsd.org/D9538

MFC r313746:
Add missing check to fix the build with IPSEC_SUPPORT and without MAC.

MFC r313805:
Fix LINT build for powerpc.

Build kernel modules support only when both IPSEC and TCP_SIGNATURE
are not defined.

MFC r313922:
For translated packets do not adjust UDP checksum if it is zero.

In case when decrypted and decapsulated packet is an UDP datagram,
check that its checksum is not zero before doing incremental checksum
adjustment.

MFC r314339:
Document that the size of AH ICV for HMAC-SHA2-NNN should be half of
NNN bits as described in RFC4868.

PR: 215978

MFC r314812:
Introduce the concept of IPsec security policies scope.

Currently are defined three scopes: global, ifnet, and pcb.
Generic security policies that IKE daemon can add via PF_KEY interface
or an administrator creates with setkey(8) utility have GLOBAL scope.
Such policies can be applied by the kernel to outgoing packets and checked
agains inbound packets after IPsec processing.
Security policies created by if_ipsec(4) interfaces have IFNET scope.
Such policies are applied to packets that are passed through if_ipsec(4)
interface.
And security policies created by application using setsockopt()
IP_IPSEC_POLICY option have PCB scope. Such policies are applied to
packets related to specific socket. Currently there is no way to list
PCB policies via setkey(8) utility.

Modify setkey(8) and libipsec(3) to be able distinguish the scope of
security policies in the `setkey -DP` listing. Add two optional flags:
'-t' to list only policies related to virtual *tunneling* interfaces,
i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL
scope. By default policies from all scopes are listed.

To implement this PF_KEY's sadb_x_policy structure was modified.
sadb_x_policy_reserved field is used to pass the policy scope from the
kernel to userland. SADB_SPDDUMP message extended to support filtering
by scope: sadb_msg_satype field is used to specify bit mask of requested
scopes.

For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy
is used to pass if_ipsec's interface if_index to the userland. For GLOBAL
policies sadb_x_policy_priority is used only to manage order of security
policies in the SPDB. For IFNET policies it is not used, so it can be used
to keep if_index.

After this change the output of `setkey -DP` now looks like:
# setkey -DPt
0.0.0.0/0[any] 0.0.0.0/0[any] any
in ipsec
esp/tunnel/87.250.242.144-87.250.242.145/unique:145
spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0
refcnt=1
# setkey -DPg
::/0 ::/0 icmp6 135,0
out none
spid=5 seq=1 pid=872 scope=global
refcnt=1

Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D9805

PR: 212018
Relnotes: yes
Sponsored by: Yandex LLC

Copy head@r302406 to stable/11 as part of the 11.0-RELEASE cycle.
Prune svn:mergeinfo from the new branch, as nothing has been merged
here.

Additional commits post-branch will follow.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Nm ipsec

Put parentheses around a few macros to prevent mdoc warnings.

Correct typo.

Reported by: gabor
MFC after: 5 days

Enable IPcomp by default.

PR: kern/123587
MFC after: 5 days

Add sysctls to toggle the behaviour of the (former) IPSEC_FILTERTUNNEL
kernel option.
This also permits tuning of the option per virtual network stack, as
well as separately per inet, inet6.

The kernel option is left for a transition period, marked deprecated,
and will be removed soon.

Initially requested by: phk (1 year 1 day ago)
MFC after: 4 weeks

Rename option IPSEC_FILTERGIF to IPSEC_FILTERTUNNEL.
Also rename the related functions in a similar way.
There are no functional changes.

For a packet coming in with IPsec tunnel mode, the default is
to only call into the firewall with the "outer" IP header and
payload.

With this option turned on, in addition to the "outer" parts,
the "inner" IP header and payload are passed to the
firewall too when going through ip_input() the second time.

The option was never only related to a gif(4) tunnel within
an IPsec tunnel and thus the name was very misleading.

Discussed at: BSDCan 2007
Best new name suggested by: rwatson
Reviewed by: rwatson
Approved by: re (bmah)

Remove the last entries to fast_ipsec.
Merge in parts of the old fast_ipsec.4 man page to ipsec.4 and
start updating ipsec.4 man page.

Reviewed by: brueffer, sam (slightly earlier versions), bmah
Approved by: re (bmah)

Markup fixes.

- add note about IPSEC_FILTERGIF to fast_ipsec(4) and let the users know
that it is not possible to use Fast IPsec in conjuction with KAME IPsec
- add available kernel options to ipsec(4)
- add reference for fast_ipsec(4) to ipsec(4)

Reviewed by: trhodes (mentor), keramida (mentor)
Approved by: keramida (mentor)

A little extra cleaning up.

MFC after: 1 week

Clean up some descriptions and remove ambiguities in the language.
Add explanations to the examples.

MFC after: 1 week

Expand contractions.

Fixed the misplaced $FreeBSD$.

List RFCs under SEE ALSO.

PR: 46918

mdoc(7) police: Use the new .In macro for #include statements.

mdoc(7) police:

Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text.
Not only this slows down the mdoc(7) processing significantly, but it also
has an undesired (in this case) effect of disabling hyphenation within the
entire enclosed block.

mdoc(7) police: remove extraneous .Pp before and/or after .Sh.

clarify problem with inbound AH.
spdadd A B -P in ipsec esp/tunnel/C-D/use ah/tunnel/C-D/require;
does not work due to 1-bit validation bit we are using with inbound
policy checking.

Submitted by: itojun
Obtained from: KAME
MFC after: 1 week

Sync with recent KAME.
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.

TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.

Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks

Correct cross-references:
setsockopt.3 --> setsockopt.2
syslog.8 --> syslogd.8
tcpdump.8 --> tcpdump.1

MFC after: 1 week

Prepare for mdoc(7)NG.

mdoc(7) police: use the new features of the Nm macro.

bring in latest kame doc. talk about ah tunnel caveat.

Remove references to man pages that don't exist.

PR: docs/17506

Merge from KAME. Basically man doc improvement and contents fix.

Obtained from: KAME project

Change .Os macro to an empty one to denote that the KAME files are
not FreeBSD specific.

Made happy: sheldonh

libipsec and IPsec related apps. (and some KAME related man pages)

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project