| #
328454 |
|
26-Jan-2018 |
jhb |
MFC 326184: Decode kevent structures logged via ktrace(2) in kdump.
- Add a new KTR_STRUCT_ARRAY ktrace record type which dumps an array of
structures.
The structure name in the record payload is preceded by a size_t
containing the size of the individual structures. Use this to
replace the previous code that dumped the kevent arrays dumped for
kevent(). kdump is now able to decode the kevent structures rather
than dumping their contents via a hexdump.
One change from before is that the 'changes' and 'events' arrays are
not marked with separate 'read' and 'write' annotations in kdump
output. Instead, the first array is the 'changes' array, and the
second array (only present if kevent doesn't fail with an error) is
the 'events' array. For kevent(), empty arrays are denoted by an
entry with an array containing zero entries rather than no record.
- Move kevent decoding tables from truss to libsysdecode.
This adds three new functions to decode members of struct kevent:
sysdecode_kevent_filter, sysdecode_kevent_flags, and
sysdecode_kevent_fflags.
kdump uses these helper functions to pretty-print kevent fields.
- Move structure definitions for freebsd11 and freebsd32 kevent
structures to <sys/event.h> so that they can be shared with userland.
The 32-bit structures are only exposed if _WANT_KEVENT32 is defined.
The freebsd11 structures are only exposed if _WANT_FREEBSD11_KEVENT is
defined. The 32-bit freebsd11 structure requires both.
- Decode freebsd11 kevent structures in truss for the compat11.kevent()
system call.
- Log 32-bit kevent structures via ktrace for 32-bit compat kevent()
system calls.
- While here, constify the 'void *data' argument to ktrstruct().
Note that this version of the change for 11.x does not include freebsd11
kevent structures or _WANT_FREEBSD11_KEVENT. It also does not include
the change to decode the compat11.kevent system call in truss.
|
| #
326044 |
|
21-Nov-2017 |
jhb |
MFC 319493,319509,319520,319595,319677,319679-319681,319688,319689,
319761-319768,320010,322899,322959,323020,323021,323151:
Sync libsysdecode, kdump, and truss with head (aside from changes such
as ino64 that are not applicable to 11).
319493:
Decode the arguments passed to __cap_rights_get() and cap_rights_limit().
319509:
Decode the argument passed to cap_getmode().
The returned integer value is output.
319520:
Decode the 'who' argument passed to getrusage().
Add a new sysdecode_getrusage_who() which decodes the RUSAGE_* constant
passed as the first argument to getrusage(). Use this function in both
kdump and truss to decode the first argument to getrusage().
319595:
Decode arguments to dup, dup2, getdirentries, pread, and pwrite.
- dup and dup2 print fd arguments in decimal.
- pread and pwrite are similar to read and write with the addition of the
file offset.
- getdirentries displays the output entries as a string for now and also
prints the value returned in *basep. Eventually the buffer for
getdirentries should perhaps be decoded as an array of dirent
structures.
319677:
Decode arguments to ACL related system calls.
This only decodes the raw arguments but not the contents of the struct acl
objects.
319679:
Decode arguments passed to extended attribute related system calls.
The cmd argument passed to extattrctl() is not decoded as a string constant
but is just printed in hex. The value is filesystem-specific but in
practice is only used with UFS1 filesystems.
319680:
Decode arguments to minherit().
319681:
Decode arguments to mlock(), mlockall(), and munlock().
319688:
Decode flags passed to mount(), nmount(), and unmount().
319689:
Decode arguments passed to msync().
319761:
Fix decoding of setpriority() arguments.
The PRIO_* 'which' value is stored in the first argument to setpriority(2),
not the last. While here, decode the arguments to getpriority(2).
319762:
Decode arguments to getpriority() and setpriority().
319763:
Decode the arguments to ptrace().
This does not decode structures returned by ptrace().
319764:
Decode the arguments to quotactl().
319765:
Improve decoding of RB_AUTOBOOT in the 'howto' argument to reboot().
The reboot() system call accepts a mode (RB_AUTOBOOT, RB_HALT, RB_POWEROFF,
or RB_REROOT) as well as zero or more optional flags in 'howto'.
However, RB_AUTOBOOT was only displayed if 'howto' was exactly 0.
Combinations like 'RB_AUTOBOOT | RB_DUMP' were decoded as 'RB_DUMP'.
Instead, imply that RB_AUTOBOOT was specified if none of the other "mode"
flags were specified.
319766:
Decode the 'howto' argument to reboot().
319767:
Decode arguments to rtprio_thread() (same as rtprio()).
319768:
Decode arguments to rtprio() and rtprio_thread().
320010:
Decode arguments to sched_* family of system calls.
This includes decoding both scheduler policy constants and the sched_param
structure for sched_get_priority_max(), sched_get_priority_min(),
sched_getparam(), sched_getscheduler(), sched_rr_get_interval(),
sched_setparam(), and sched_setscheduler().
322899:
Decode arguments passed to thr_set_name().
322959:
Decode extra signal information for caught signals.
Decode fields from the siginfo_t stored in the PT_LWPINFO structure when a
signal is caught by a traced process. This includes the signal code
(si_code) as well as additional members such as si_addr, si_pid, etc.
323020:
Trim stale prototype for ioctlname().
323021:
Decode signal information returned by system calls.
Specifically, decode the siginfo structure returned by sigtimedwait(),
sigwaitinfo(), and wait6(). While here, also decode the signal number
returned in the second argument to sigwait().
323151:
Decode pathconf() names, *at() flags, and sysarch() numbers in libsysdecode.
Move tables that were previously in truss over to libsysdecode. truss
output is unchanged, but kdump has been updated to decode these fields.
In addition, sysdecode_sysarch_number() should support all platforms
whereas the old table in truss only supported x86.
PR: 214885, 215448
|
| #
311999 |
|
12-Jan-2017 |
jhb |
MFC 307538,307948,308602,308603,311151: Move kdump's mksubr into libsysdecode.
307538:
Move mksubr from kdump into libsysdecode.
Restructure this script so that it generates a header of tables instead
of a source file. The tables are included in a flags.c source file which
provides functions to decode various system call arguments.
For functions that decode an enumeration, the function returns a pointer
to a string for known values and NULL for unknown values.
For functions that do more complex decoding (typically of a bitmask), the
function accepts a pointer to a FILE object (open_memstream() can be used
as a string builder) to which decoded values are written. If the
function operates on a bitmask, the function returns true if any bits
were decoded or false if the entire value was valid. Additionally, the
third argument accepts a pointer to a value to which any undecoded bits
are stored. This pointer can be NULL if the caller doesn't care about
remaining bits.
Convert kdump over to using decoder functions from libsysdecode instead of
mksubr. truss also uses decoders from libsysdecode instead of private
lookup tables, though lookup tables for objects not decoded by kdump remain
in truss for now. Eventually most of these tables should move into
libsysdecode as the automated table generation approach from mksubr is
less stale than the static tables in truss.
Some changes have been made to truss and kdump output:
- The flags passed to open() are now properly decoded in that one of
O_RDONLY, O_RDWR, O_WRONLY, or O_EXEC is always included in a decoded
mask.
- Optional arguments to open(), openat(), and fcntl() are only printed
in kdump if they exist (e.g. the mode is only printed for open() if
O_CREAT is set in the flags).
- Print argument to F_GETLK/SETLK/SETLKW in kdump as a pointer, not int.
- Include all procctl() commands.
- Correctly decode pipe2() flags in truss by not assuming full
open()-like flags with O_RDONLY, etc.
- Decode file flags passed to *chflags() as file flags (UF_* and SF_*)
rather than as a file mode.
- Fix decoding of quotactl() commands by splitting out the two command
components instead of assuming the raw command value matches the
primary command component.
In addition, truss and kdump now build without triggering any warnings.
All of the sysdecode manpages now include the required headers in the
synopsis.
307948:
Use binary and (&) instead of logical to extract the mask of a capability.
308602:
Generate and use a proper .depend file for tables.h.
308603:
Move libsysdecode-specific hack out of buildworld.
This should fix the lib32 build since it was not removing the generated
ioctl.c. This file is generated by a find(1) call, so cannot use normal
dependency tracking methods.
311151:
Update libsysdecode for getfsstat() 'flags' argument changing to 'mode'.
As a followup to r310638, update libsysdecode (and kdump) to decode the
'mode' argument to getfsstat(). sysdecode_getfsstat_flags() has been
renamed to sysdecode_getfsstat_mode() and now treats the argument as an
enumerated value rather than a mask of flags.
|