- Copy stable/10@296371 to releng/10.3 in preparation for 10.3-RC1
builds.
- Update newvers.sh to reflect RC1.
- Update __FreeBSD_version to reflect 10.3.
- Update default pkg(8) configuration to use the quarterly branch.

Approved by: re (implicit)

MFC r282209:
Emulate the 'bit test' instruction.

MFC r282259:
Re-implement RTC current time calculation to eliminate the possibility of
losing time.

MFC r282281:
Advertise the MTRR feature via CPUID and emulate the minimal set of MTRR MSRs.

MFC r282284:
When an instruction cannot be decoded just return to userspace so bhyve(8)
can dump the instruction bytes.

MFC r282287:
Don't require <sys/cpuset.h> to be always included before <machine/vmm.h>.

MFC r282296:
Emulate MSR_SYSCFG which is accessed by Linux on AMD cpus when MTRRs are
enabled.

MFC r282301:
Relax limits when transitioning a vector from the IRR to the ISR and also
when extinguishing it from the ISR in response to an EOI.

MFC r282335:
Advertise an additional memory BAR in the "dummy" device emulation.

MFC r282336:
Emulate machine check related MSRs to allow guest OSes like Windows to boot.

MFC r282351:
Don't advertise the Intel SMX capability to the guest.

MFC r282407:
Emulate the 'CMP r/m8, imm8' instruction.

MFC r282519:
Add macros for AMD-specific bits in MSR_EFER: LMSLE, FFXSR and TCE.

MFC r282520:
Emulate guest writes to EFER_MSR properly.

MFC r282558:
Deprecate the 3-way return values from vm_gla2gpa() and vm_copy_setup().

MFC r282571:
Check 'td_owepreempt' and yield the vcpu thread if it is set.

MFC r282595:
Allow byte reads of AHCI registers.

MFC r282784:
Handling indirect descriptors is a capability of the host and not one that
needs to be negotiated. Use the host capabilities field and not the negotiated
field when verifying that indirect descriptors are supported.

MFC r282788:
Allow configuration of the sector size advertised to the guest.

MFC r282865:
Set the subvendor field in config space to the vendor ID. This is required
by the Windows virtio drivers to correctly match a device.

MFC r282922:
Bump the size of the blockif scatter-gather list to 67.

MFC r283075:
Fix off-by-one in array index bounds check. bhyveload would allow you to
create 33 entries on an array that only has 32 slots

MFC r283168:
Temporarily revert r282922 which bumped the max descriptors.

MFC r283255:
Emulate the "CMP r/m, reg" instruction (opcode 39H).

MFC r283256:
Add an option "--get-vmcs-exit-inst-length" to display the instruction length
of the instruction that caused the VM-exit.

MFC r283264:
Change the header type of the emulated host-bridge from type 1 to type 0.

MFC r283293:
Don't rely on the 'VM-exit instruction length' field in the VMCS to always
have an accurate length on an EPT violation.

MFC r283299:
Remove bogus verification of instruction length after instruction decode.

MFC r283308:
Exceptions don't deliver an error code in real mode.

MFC r283657:
Fix non-deterministic delays when accessing a vcpu that was in "running" or
"sleeping" state.

MFC r283973:
Use tunable 'hw.vmm.svm.features' to disable specific SVM features even
though they might be available in hardware. Use tunable 'hw.vmm.svm.num_asids'
to limit the number of ASIDs used by the hypervisor.

MFC r284046:
Fix regression in 'verify_gla()' with the RIP-relative addressing mode.

MFC r284174:
Support guest writes to the TSC by enabling the "use TSC offsetting"
execution control.

MFC r276428:
Replace bhyve's minimal RTC emulation with a fully featured one in vmm.ko.

MFC r276432:
Initialize all fields of 'struct vm_exception exception' before passing it
to vm_inject_exception().

MFC r276763:
Clear blocking due to STI or MOV SS in the hypervisor when an instruction is
emulated or when the vcpu incurs an exception.

MFC r277149:
Clean up usage of 'struct vm_exception' to only to communicate information
from userspace to vmm.ko when injecting an exception.

MFC r277168:
Fix typo (missing comma).

MFC r277309:
Make the error message explicit instead of just printing the usage if the
virtual machine name is not specified.

MFC r277310:
Simplify instruction restart logic in bhyve.

MFC r277359:
Fix a bug in libvmmapi 'vm_copy_setup()' where it would return success even
if the 'gpa' was in the guest MMIO region.

MFC r277360:
MOVS instruction emulation.

MFC r277626:
Add macro to identify AVIC capability (advanced virtual interrupt controller)
in AMD processors.

MFC r279220:
Don't close a block context if it couldn't be opened avoiding a null deref.

MFC r279225:
Add "-u" option to bhyve(8) to indicate that the RTC should maintain UTC time.

MFC r279227:
Emulate MSR 0xC0011024 when running on AMD processors.

MFC r279228:
Always emulate MSR_PAT on Intel processors and don't rely on PAT save/restore
capability of VT-x. This lets bhyve run nested in older VMware versions that
don't support the PAT save/restore capability.

MFC r279540:
Fix warnings/errors when building vmm.ko with gcc.

MFC r270326
Fix a recursive lock acquisition in vi_reset_dev().

MFC r270434
Return the spurious interrupt vector (IRQ7 or IRQ15) if the atpic cannot find
any unmasked pin with an interrupt asserted.

MFC r270436
Fix a bug in the emulation of CPUID leaf 0x4.

MFC r270437
Add "hw.vmm.topology.threads_per_core" and "hw.vmm.topology.cores_per_package"
tunables to modify the default cpu topology advertised by bhyve.

MFC r270855
Set the 'inst_length' to '0' early on before any error conditions are detected
in the emulation of the task switch. If any exceptions are triggered then the
guest %rip should point to instruction that caused the task switch as opposed
to the one after it.

MFC r270857
The "SUB" instruction used in getcc() actually does 'x -= y' so use the
proper constraint for 'x'. The "+r" constraint indicates that 'x' is an
input and output register operand.

While here generate code for different variants of getcc() using a macro
GETCC(sz) where 'sz' indicates the operand size.

Update the status bits in %rflags when emulating AND and OR opcodes.

MFC r271439
Initialize 'bc_rdonly' to the right value.

MFC r271451
Optimize the common case of injecting an interrupt into a vcpu after a HLT
by explicitly moving it out of the interrupt shadow.

MFC r271888
Restructure the MSR handling so it is entirely handled by processor-specific
code.

MFC r271890
MSR_KGSBASE is no longer saved and restored from the guest MSR save area. This
behavior was changed in r271888 so update the comment block to reflect this.

MFC r271891
Add some more KTR events to help debugging.

MFC r272197
mmap(2) requires either MAP_PRIVATE or MAP_SHARED for non-anonymous mappings.

MFC r272395
Get rid of code that dealt with the hardware not being able to save/restore
the PAT MSR on guest exit/entry. This workaround was done for a beta release
of VMware Fusion 5 but is no longer needed in later versions.

All Intel CPUs since Nehalem have supported saving and restoring MSR_PAT
in the VM exit and entry controls.

MFC r272670
Inject #UD into the guest when it executes either 'MONITOR' or 'MWAIT'.

MFC r272710
Implement the FLUSH operation in the virtio-block emulation.

MFC r272838
iasl(8) expects integer fields in data tables to be specified as hexadecimal
values. Therefore the bit width of the "PM Timer Block" was actually being
interpreted as 50-bits instead of the expected 32-bit.

This eliminates an error message emitted by a Linux 3.17 guest during boot:
"Invalid length for FADT/PmTimerBlock: 50, using default 32"

MFC r272839
Support Intel-specific MSRs that are accessed when booting up a linux in bhyve:
- MSR_PLATFORM_INFO
- MSR_TURBO_RATIO_LIMITx
- MSR_RAPL_POWER_UNIT

MFC r273108
Emulate "POP r/m". This is needed to boot OpenBSD/i386 MP kernel in bhyve.

MFC r273212
Support stopping and restarting the AHCI command list via toggling PxCMD.ST
from '1' to '0' and back. This allows the driver a chance to recover if
for instance a timeout occurred due to activity on the host.

MFC r267921, r267934, r267949, r267959, r267966, r268202, r268276,
r268427, r268428, r268521, r268638, r268639, r268701, r268777,
r268889, r268922, r269008, r269042, r269043, r269080, r269094,
r269108, r269109, r269281, r269317, r269700, r269896, r269962,
r269989.

Catch bhyve up to CURRENT.

Lightly tested with FreeBSD i386/amd64, Linux i386/amd64, and
OpenBSD/amd64. Still resolving an issue with OpenBSD/i386.

Many thanks to jhb@ for all the hard work on the prior MFCs !

r267921 - support the "mov r/m8, imm8" instruction
r267934 - document options
r267949 - set DMI vers/date to fixed values
r267959 - doc: sort cmd flags
r267966 - EPT misconf post-mortem info
r268202 - use correct flag for event index
r268276 - 64-bit virtio capability api
r268427 - invalidate guest TLB when cr3 is updated, needed for TSS
r268428 - identify vcpu's operating mode
r268521 - use correct offset in guest logical-to-linear translation
r268638 - chs value
r268639 - chs fake values
r268701 - instr emul operand/address size override prefix support
r268777 - emulation for legacy x86 task switching
r268889 - nested exception support
r268922 - fix INVARIANTS build
r269008 - emulate instructions found in the OpenBSD/i386 5.5 kernel
r269042 - fix fault injection
r269043 - Reduce VMEXIT_RESTARTs in task_switch.c
r269080 - fix issues in PUSH emulation
r269094 - simplify return values from the inout handlers
r269108 - don't return -1 from the push emulation handler
r269109 - avoid permanent sleep in vm_handle_hlt()
r269281 - list VT-x features in base kernel dmesg
r269317 - Mark AHCI fatal errors as not completed
r269700 - Support PCI extended config space in bhyve
r269896 - Minor cleanup
r269962 - use max guest memory when creating IOMMU domain
r269989 - fix interrupt mode names

Add emulation for legacy x86 task switching mechanism.

FreeBSD/i386 uses task switching to handle double fault exceptions and this
change enables that to work.

Reported by: glebius