- Copy stable/10@296371 to releng/10.3 in preparation for 10.3-RC1
builds.
- Update newvers.sh to reflect RC1.
- Update __FreeBSD_version to reflect 10.3.
- Update default pkg(8) configuration to use the quarterly branch.

Approved by: re (implicit)

MFC r267921, r267934, r267949, r267959, r267966, r268202, r268276,
r268427, r268428, r268521, r268638, r268639, r268701, r268777,
r268889, r268922, r269008, r269042, r269043, r269080, r269094,
r269108, r269109, r269281, r269317, r269700, r269896, r269962,
r269989.

Catch bhyve up to CURRENT.

Lightly tested with FreeBSD i386/amd64, Linux i386/amd64, and
OpenBSD/amd64. Still resolving an issue with OpenBSD/i386.

Many thanks to jhb@ for all the hard work on the prior MFCs !

r267921 - support the "mov r/m8, imm8" instruction
r267934 - document options
r267949 - set DMI vers/date to fixed values
r267959 - doc: sort cmd flags
r267966 - EPT misconf post-mortem info
r268202 - use correct flag for event index
r268276 - 64-bit virtio capability api
r268427 - invalidate guest TLB when cr3 is updated, needed for TSS
r268428 - identify vcpu's operating mode
r268521 - use correct offset in guest logical-to-linear translation
r268638 - chs value
r268639 - chs fake values
r268701 - instr emul operand/address size override prefix support
r268777 - emulation for legacy x86 task switching
r268889 - nested exception support
r268922 - fix INVARIANTS build
r269008 - emulate instructions found in the OpenBSD/i386 5.5 kernel
r269042 - fix fault injection
r269043 - Reduce VMEXIT_RESTARTs in task_switch.c
r269080 - fix issues in PUSH emulation
r269094 - simplify return values from the inout handlers
r269108 - don't return -1 from the push emulation handler
r269109 - avoid permanent sleep in vm_handle_hlt()
r269281 - list VT-x features in base kernel dmesg
r269317 - Mark AHCI fatal errors as not completed
r269700 - Support PCI extended config space in bhyve
r269896 - Minor cleanup
r269962 - use max guest memory when creating IOMMU domain
r269989 - fix interrupt mode names

MFC 266125:
Implement a PCI interrupt router to route PCI legacy INTx interrupts to
the legacy 8259A PICs.

MFC 261904,261905,262143,262184,264921,265211,267169,267292,267294:
Various PCI fixes:
- Allow PCI devices to be configured on all valid bus numbers from 0 to 255.
- Tweak the handling of PCI capabilities in emulated devices to remove
the non-standard zero capability list terminator.
- Add a check to validate that memory BARs of passthru devices are 4KB
aligned.
- Respect and track the enable bit in the PCI configuration address word.
- Handle quad-word access to 32-bit register pairs.

MFC 260239,261268,265058:
Expand the support for PCI INTx interrupts including providing interrupt
routing information for INTx interrupts to I/O APIC pins and enabling
INTx interrupts in the virtio and AHCI backends.

MFC 261217:
Remove support for legacy PCI devices. These haven't been needed since
support for LPC uart devices was added and it conflicts with upcoming
patches to add PCI INTx support.

Approved by: grehan

MFC 258859,259081,259085,259205,259213,259275,259482,259537,259702,259779:
Several changes to the local APIC support in bhyve:
- Rename 'vm_interrupt_hostcpu()' to 'vcpu_notify_event()'.
- If a vcpu disables its local apic and then executes a 'HLT' then spin
down the vcpu and destroy its thread context. Also modify the 'HLT'
processing to ignore pending interrupts in the IRR if interrupts have
been disabled by the guest. The interrupt cannot be injected into the
guest in any case so resuming it is futile.
- Use callout(9) to drive the vlapic timer instead of clocking it on each
VM exit.
- When the guest is bringing up the APs in the x2APIC mode a write to the
ICR register will now trigger a return to userspace with an exitcode of
VM_EXITCODE_SPINUP_AP.
- Change the vlapic timer lock to be a spinlock because the vlapic can be
accessed from within a critical section (vm run loop) when guest is using
x2apic mode.
- Fix the vlapic version register.
- Add a command to bhyvectl to inject an NMI on a specific vcpu.
- Add an API to deliver message signalled interrupts to vcpus. This allows
callers to treat the MSI 'addr' and 'data' fields as opaque and also lets
bhyve implement multiple destination modes: physical, flat and clustered.
- Rename the ambiguously named 'vm_setup_msi()' and 'vm_setup_msix()' to
'vm_setup_pptdev_msi()' and 'vm_setup_pptdev_msix()' respectively.
- Consolidate the virtual apic initialization in a single function:
vlapic_reset()
- Add a generic routine to trigger an LVT interrupt that supports both
fixed and NMI delivery modes.
- Add an ioctl and bhyvectl command to trigger local interrupts inside a
guest. In particular, a global NMI similar to that raised by SERR# or
PERR# can be simulated by asserting LINT1 on all vCPUs.
- Extend the LVT table in the vCPU local APIC to support CMCI.
- Flesh out the local APIC error reporting a bit to cache errors and
report them via ESR when ESR is written to. Add support for asserting
the error LVT when an error occurs. Raise illegal vector errors when
attempting to signal an invalid vector for an interrupt or when sending
an IPI.
- Export table entries in the MADT and MP Table advertising the stock x86
config of LINT0 set to ExtInt and LINT1 wired to NMI.

MFC 260206:
Rework the DSDT generation code a bit to generate more accurate info about
LPC devices. Among other things, the LPC serial ports now appear as
ACPI devices.

MFC 257422,257661,258075,258476,258494,258579,258609,258699:
Several enhancements to the I/O APIC support in bhyve including:
- Move the I/O APIC device model from userspace into vmm.ko and add
ioctls to assert and deassert I/O APIC pins.
- Add HPET device emulation including a single timer block with 8 timers.
- Remove the 'vdev' abstraction.

Approved by: neel

MFC r257293.

Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached
to a virtual machine then we implicitly create COM1 and COM2 ISA devices.

Prior to this change the only way of attaching a COM port to the virtual
machine was by presenting it as a PCI device that is mapped at the legacy
I/O address 0x3F8 or 0x2F8.

There were some issues with the original approach:
- It did not work at all with UEFI because UEFI will reprogram the PCI device
BARs and remap the COM1/COM2 ports at non-legacy addresses.
- OpenBSD GENERIC kernel does not create a /dev/console because it expects
the uart device at the legacy 0x3F8/0x2F8 address to be an ISA device.
- It was functional with a FreeBSD guest but caused the console to appear
on /dev/ttyu2 which was not intuitive.

The uart emulation is now independent of the bus on which it resides. Thus it
is possible to have uart devices on the PCI bus in addition to the legacy
COM1/COM2 devices behind the LPC bus.

The command line option to attach ISA COM1/COM2 ports to a virtual machine is
"-s <bus>,lpc -l com1,stdio".

The command line option to create a PCI-attached uart device is:
"-s <bus>,uart[,stdio]"

The command line option to create PCI-attached COM1/COM2 device is:
"-S <bus>,uart[,stdio]". This style of creating COM ports is deprecated.

Approved by: re (glebius)

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Support an optional "mac=" parameter to virtio-net config, to allow
users to set the MAC address for a device.

Clean up some obsolete code in pci_virtio_net.c

Allow an error return from a PCI device emulation's init routine
to be propagated all the way back to the top-level and result in
the process exiting.

Submitted by: Dinakar Medavaram dinnu sun at gmail (original version)

Gripe if some <slot,function> tuple is specified more than once instead of
silently overwriting the previous assignment.

Gripe if the emulation is not recognized instead of silently ignoring the
emulated device.

If an error is detected by pci_parse_slot() then exit from the command line
parsing loop in main().

Submitted by (initial version): Chris Torek (chris.torek@gmail.com)

Get rid of unused struct member.

Pointed out by: Gopakumar T
Obtained from: NetApp

Advertise PCI-E capability in the hostbridge device presented to the guest.

FreeBSD wants to see this capability in at least one device in the PCI
hierarchy before it allows use of MSI or MSI-X.

Obtained from: NetApp

Fix a bug in the passthru implementation where it would assume that all
devices are MSI-X capable. This in turn would lead it to treat bar 0 as
the MSI-X table bar even if the underlying device did not support MSI-X.

Fix this by providing an API to query the MSI-X table index of the emulated
device. If the underlying device does not support MSI-X then this API will
return -1.

Obtained from: NetApp

Add support for MSI-X interrupts in the virtio network device and make that
the default.

The current behavior of advertising a single MSI vector can be requested by
setting the environment variable "BHYVE_USE_MSI" to "true". The use of MSI
is not compliant with the virtio specification and will be eventually phased
out.

Submitted by: Gopakumar T
Obtained from: NetApp

Allocate the memory for the MSI-X table dynamically instead of allocating 32KB
statically. In most cases the number of table entries will be far less than
the maximum of 2048 allowed by the PCI specification.

Reuse macros from pcireg.h to interpret the MSI-X capability instead of rolling
our own.

Obtained from: NetApp

Get rid of redundant 'table_size' field in struct pi_msix. If needed it can
always be calculated from the number of entries in the MSI-X table.

Obtained from: NetApp

Add svn properties to the recently merged bhyve source files.

The pre-commit hook will not allow any commits without the svn:keywords
property in head.

Merge projects/bhyve to head.

'bhyve' was developed by grehan@ and myself at NetApp (thanks!).

Special thanks to Peter Snyder, Joe Caradonna and Michael Dexter for their
support and encouragement.

Obtained from: NetApp

Remove mptable generation code from libvmmapi and move it to bhyve.
Firmware tables require too much knowledge of system configuration,
and it's difficult to pass that information in general terms to a library.
The upcoming ACPI work exposed this - it will also livein bhyve.

Also, remove code specific to NetApp from the mptable name, and remove
the -n option from bhyve.

Reviewed by: neel
Obtained from: NetApp

Rework how guest MMIO regions are dealt with.

- New memory region interface. An RB tree holds the regions,
with a last-found per-vCPU cache to deal with the common case
of repeated guest accesses to MMIO registers in the same page.

- Support memory-mapped BARs in PCI emulation.

mem.c/h - memory region interface

instruction_emul.c/h - remove old region interface.
Use gpa from EPT exit to avoid a tablewalk to
determine operand address. Determine operand size
and use when calling through to region handler.

fbsdrun.c - call into region interface on paging
exit. Distinguish between instruction emul error
and region not found

pci_emul.c/h - implement new BAR callback api.
Split BAR alloc routine into routines that
require/don't require the BAR phys address.

ioapic.c
pci_passthru.c
pci_virtio_block.c
pci_virtio_net.c
pci_uart.c - update to new BAR callback i/f

Reviewed by: neel
Obtained from: NetApp

Add 16550 uart emulation as a PCI device. This allows it to
be activated as part of the slot config options.
The syntax is:

-s <slotnum>,uart[,stdio]

The stdio parameter instructs the code to perform i/o using
stdin/stdout. It can only be used for one instance.
To allow legacy i/o ports/irqs to be used, a new variant of
the slot command, -S, is introduced. When used to specify a
slot, the device will use legacy resources if it supports
them; otherwise it will be treated the same as the '-s' option.
Specifying the -S option with the uart will first use the 0x3f8/irq 4
config, and the second -S will use 0x2F8/irq 3.

Interrupt delivery is awaiting the arrival of the i/o apic code,
but this works fine in uart(4)'s polled mode.

This code was written by Cynthia Lu @ MIT while an intern at NetApp,
with further work from neel@ and grehan@.

Obtained from: NetApp

MSI-x interrupt support for PCI pass-thru devices.

Includes instruction emulation for memory r/w access. This
opens the door for io-apic, local apic, hpet timer, and
legacy device emulation.

Submitted by: ryan dot berryhill at sandvine dot com
Reviewed by: grehan
Obtained from: Sandvine

First cut to port bhyve, vmmctl, and libvmmapi to HEAD.

Import of bhyve hypervisor and utilities, part 1.
vmm.ko - kernel module for VT-x, VT-d and hypervisor control
bhyve - user-space sequencer and i/o emulation
vmmctl - dump of hypervisor register state
libvmm - front-end to vmm.ko chardev interface

bhyve was designed and implemented by Neel Natu.

Thanks to the following folk from NetApp who helped to make this available:
Joe CaraDonna
Peter Snyder
Jeff Heller
Sandeep Mann
Steve Miller
Brian Pawlowski