- Copy stable/10@296371 to releng/10.3 in preparation for 10.3-RC1
builds.
- Update newvers.sh to reflect RC1.
- Update __FreeBSD_version to reflect 10.3.
- Update default pkg(8) configuration to use the quarterly branch.

Approved by: re (implicit)

MFC 266125:
Implement a PCI interrupt router to route PCI legacy INTx interrupts to
the legacy 8259A PICs.

MFC 261904,261905,262143,262184,264921,265211,267169,267292,267294:
Various PCI fixes:
- Allow PCI devices to be configured on all valid bus numbers from 0 to 255.
- Tweak the handling of PCI capabilities in emulated devices to remove
the non-standard zero capability list terminator.
- Add a check to validate that memory BARs of passthru devices are 4KB
aligned.
- Respect and track the enable bit in the PCI configuration address word.
- Handle quad-word access to 32-bit register pairs.

MFC 260239,261268,265058:
Expand the support for PCI INTx interrupts including providing interrupt
routing information for INTx interrupts to I/O APIC pins and enabling
INTx interrupts in the virtio and AHCI backends.

MFC 258859,259081,259085,259205,259213,259275,259482,259537,259702,259779:
Several changes to the local APIC support in bhyve:
- Rename 'vm_interrupt_hostcpu()' to 'vcpu_notify_event()'.
- If a vcpu disables its local apic and then executes a 'HLT' then spin
down the vcpu and destroy its thread context. Also modify the 'HLT'
processing to ignore pending interrupts in the IRR if interrupts have
been disabled by the guest. The interrupt cannot be injected into the
guest in any case so resuming it is futile.
- Use callout(9) to drive the vlapic timer instead of clocking it on each
VM exit.
- When the guest is bringing up the APs in the x2APIC mode a write to the
ICR register will now trigger a return to userspace with an exitcode of
VM_EXITCODE_SPINUP_AP.
- Change the vlapic timer lock to be a spinlock because the vlapic can be
accessed from within a critical section (vm run loop) when guest is using
x2apic mode.
- Fix the vlapic version register.
- Add a command to bhyvectl to inject an NMI on a specific vcpu.
- Add an API to deliver message signalled interrupts to vcpus. This allows
callers to treat the MSI 'addr' and 'data' fields as opaque and also lets
bhyve implement multiple destination modes: physical, flat and clustered.
- Rename the ambiguously named 'vm_setup_msi()' and 'vm_setup_msix()' to
'vm_setup_pptdev_msi()' and 'vm_setup_pptdev_msix()' respectively.
- Consolidate the virtual apic initialization in a single function:
vlapic_reset()
- Add a generic routine to trigger an LVT interrupt that supports both
fixed and NMI delivery modes.
- Add an ioctl and bhyvectl command to trigger local interrupts inside a
guest. In particular, a global NMI similar to that raised by SERR# or
PERR# can be simulated by asserting LINT1 on all vCPUs.
- Extend the LVT table in the vCPU local APIC to support CMCI.
- Flesh out the local APIC error reporting a bit to cache errors and
report them via ESR when ESR is written to. Add support for asserting
the error LVT when an error occurs. Raise illegal vector errors when
attempting to signal an invalid vector for an interrupt or when sending
an IPI.
- Export table entries in the MADT and MP Table advertising the stock x86
config of LINT0 set to ExtInt and LINT1 wired to NMI.

MFC 259826,259997,259998:
Support soft power-off via the ACPI S5 state for bhyve guests and wire
up a virtual power button to SIGTERM:
- Implement the PM1_EVT and PM1_CTL registers required by ACPI.
- Emulate the Reset Control register at I/O port 0xcf9.
- Advertise an _S5 package.
- Implement an SMI_CMD register with commands to enable and disable ACPI.
Currently the only change when ACPI is enabled is to enable the virtual
power button via SIGTERM.
- Implement a fixed-feature power button when ACPI is enabled by asserting
PWRBTN_STS in PM1_EVT when SIGTERM is received.
- Add support for EVFILT_SIGNAL events to mevent.
- Implement support for the ACPI system command interrupt (SCI) and assert
it when needed based on the values in PM1_EVT. Mark the SCI as active-low
and level triggered in the MADT and MP Table.

MFC 257422,257661,258075,258476,258494,258579,258609,258699:
Several enhancements to the I/O APIC support in bhyve including:
- Move the I/O APIC device model from userspace into vmm.ko and add
ioctls to assert and deassert I/O APIC pins.
- Add HPET device emulation including a single timer block with 8 timers.
- Remove the 'vdev' abstraction.

Approved by: neel

MFC 259013:
Fix the processor table entry structure to use a fixed-width type for
32-bit fields so it is the correct size on amd64. Remove a workaround
for the broken structure from bhyve(8).

MFC r256657,r257018,r257347,r257423,r257729,r257767,
r257933,r258609,r258614,r258668,r258673,r258855

Pull in some minor bugfixes and functionality enhancements
from CURRENT. These are candidates to be moved to 10.0-release.

r258855
mdoc: quote string properly.

r258673
Don't create an initial value for the host filesystem of "/".

r258668
Allow bhyve and bhyveload to attach to tty devices.

r258614
The 22-bit Data Byte Count (DBC) field of a Physical Region Descriptor was
being read as a 32-bit quantity by the bhyve AHCI driver.

r258609
Fix discrepancy between the IOAPIC ID advertised by firmware tables and the
actual value read by the guest.

r257933
Route the legacy timer interrupt (IRQ0) to pin 2 of the IOAPIC.

r257767
Fix an off-by-one error when iterating over the emulated PCI BARs.

r257729
Add the VM name to the process name with setproctitle().

r257423
Make the virtual ioapic available unconditionally in a bhyve virtual machine.

r257347
Update copyright to include the author of the LPC bridge emulation code.

hand-merge r257018
Tidy usage messages for bhyve and bhyveload.

r256657
Add an option to bhyveload(8) that allows setting a loader environment variable
from the command line.

Discussed with: neel

MFC r256709:

Eliminate unconditional debug printfs.

Linux writes to these nominally read-only registers,
so avoid having bhyve write warning messages to stdout
when the reg writes can be safely ignored. Change the
WPRINTF to DPRINTF which is conditional.

Approved by: re (delphij)

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

config checksum is over the entire fixed portion, not just the
config header. FreeBSD doesn't check this but other o/s's do.

Obtained from: NetApp

Simplify the assignment of memory to virtual machines by requiring a single
command line option "-m <memsize in MB>" to specify the memory size.

Prior to this change the user needed to explicitly specify the amount of
memory allocated below 4G (-m <lowmem>) and the amount above 4G (-M <highmem>).

The "-M" option is no longer supported by 'bhyveload' and 'bhyve'.

The start of the PCI hole is fixed at 3GB and cannot be directly changed
using command line options. However it is still possible to change this in
special circumstances via the 'vm_set_lowmem_limit()' API provided by
libvmmapi.

Submitted by: Dinakar Medavaram (initial version)
Reviewed by: grehan
Obtained from: NetApp

Specify the length of the mapping requested from 'paddr_guest2host()'.

This seems prudent to do in its own right but it also opens up the possibility
of not having to mmap the entire guest address space in the 'bhyve' process
context.

Discussed with: grehan
Obtained from: NetApp

Add svn properties to the recently merged bhyve source files.

The pre-commit hook will not allow any commits without the svn:keywords
property in head.

Merge projects/bhyve to head.

'bhyve' was developed by grehan@ and myself at NetApp (thanks!).

Special thanks to Peter Snyder, Joe Caradonna and Michael Dexter for their
support and encouragement.

Obtained from: NetApp

Rename fbsdrun.* -> bhyverun.*

bhyve is intended to be a generic hypervisor, and not FreeBSD-specific.

(renaming internal routines will come later)

Reviewed by: neel
Obtained from: NetApp

Remove mptable generation code from libvmmapi and move it to bhyve.
Firmware tables require too much knowledge of system configuration,
and it's difficult to pass that information in general terms to a library.
The upcoming ACPI work exposed this - it will also livein bhyve.

Also, remove code specific to NetApp from the mptable name, and remove
the -n option from bhyve.

Reviewed by: neel
Obtained from: NetApp

Allow the 'bhyve' process to control whether or not the virtual machine sees an
ioapic.

Obtained from: NetApp

First cut to port bhyve, vmmctl, and libvmmapi to HEAD.

Import of bhyve hypervisor and utilities, part 1.
vmm.ko - kernel module for VT-x, VT-d and hypervisor control
bhyve - user-space sequencer and i/o emulation
vmmctl - dump of hypervisor register state
libvmm - front-end to vmm.ko chardev interface

bhyve was designed and implemented by Neel Natu.

Thanks to the following folk from NetApp who helped to make this available:
Joe CaraDonna
Peter Snyder
Jeff Heller
Sandeep Mann
Steve Miller
Brian Pawlowski