- Copy stable/10@296371 to releng/10.3 in preparation for 10.3-RC1
builds.
- Update newvers.sh to reflect RC1.
- Update __FreeBSD_version to reflect 10.3.
- Update default pkg(8) configuration to use the quarterly branch.

Approved by: re (implicit)

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Use DEVMETHOD_END macro defined in sys/bus.h instead of {0, 0} sentinel on device_method_t arrays

Reviewed by: cognet
Approved by: cognet

Fix function prototype for device_shutdown method.

o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@

Fix another edge case I just noticed when committing the previous changes:
If bus_setup_intr() fails, cleanup the ifnet setup in vx_attach() by
calling ether_ifdetach() and if_free().

MFC after: 1 week

Rototill vx(4), add locking, and mark MPSAFE:
- Rename vxfoo() functions to vx_foo() to improve readability and
consistency with other drivers.
- Prefix most the softc members with 'vx_' (the other members already had
the prefix).
- Switch to using callout_init_mtx() and callout_*() rather than
timeout() and untimeout().
- Add some missing calls to if_free() in some failure cases in vx_attach().
- Use if_printf() and remove the unit number from the softc.
- Remove uses of the 'register' keyword and spls.
- Add locked variants of vx_init() and vx_start().
- Add a mutex to the softc and lock it in various appropriate places.
- Setup the interrupt handler last during attach.

Tested by: imp
MFC after: 1 week

Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64. The optimization is a trivial on recent machines.

Reviewed by: -arch (imp, marcel, dfr)

Use BUS_PROBE_DEFAULT in preference to 0. Also for vx, return
BUS_PROBE_LOW_PRIORITY in stead of ifdef for devices that xl and vx
both support so that xl will snarf them on up.

Start each of the license/copyright comments with /*-, minor shuffle of lines

ss if_vx through indent, and use ANSI function definitions, prior to adding
if_media and DMA support to the driver. The previous style was inconsistent
making it difficult to emulate existing style.

Add missing <sys/module.h> includes

Convert callers to the new bus_alloc_resource_any(9) API.

Submitted by: Mark Santcroos <marks@ripe.net>
Reviewed by: imp, dfr, bde

Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By: re (in principle)
Reviewed By: njl, imp
Tested On: i386, amd64, sparc64
Obtained From: NetBSD (if_xname)

Start to minimize diffs between vx and ep. These latter is based on a
more advanced version of the chips supported by the former. Matt Dodd
and I are working towards merging them, and this a step on that path.

Use PCIR_BAR(x) instead of PCIR_MAPS.

Glanced over by: imp, gibbs
Tested by: i386 LINT

Use __FBSDID().
Also some minor style cleanups.

Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.

- Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
such abuse isn't really needed. (And if we do need type information
associated with a module then we should make it explicit and not
use hacks.)

Update the vortex driver so that it no longer needs the PCI compat
interface. In addition to using newbus, it also uses bus_space rather
than inb/outb to make it MI. The grody static softc allocation stuff
has been removed as well.

Warn that this as an oldpci device..

Remove #if NVX > 0 and #if NEISA > 0 (and #include "eisa.h") as it's not
needed.

Clean up after removing sys/eventhandler.h from sys/systm.h at the last
minute. This should cover all of the missed cases (and should let LINT
build again).

Implement a new generic mechanism for attaching handler functions to
events, in order to pave the way for removing a number of the ad-hoc
implementations currently in use.

Retire the at_shutdown family of functions and replace them with
new event handler lists.

Rework kern_shutdown.c to take greater advantage of the use of event
handlers.

Reviewed by: green

Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire
files. config will leave the whole file out if configured to do so.

Missing revision markers.

Simplify the COMPAT_PCI_DRIVER/DATA_SET hack. We can add:
#define COMPAT_PCI_DRIVER(name,data) DATA_SET(pcidevice_set,data)
.. to 2.2.x and 3.x if people think it's worth it. Driver writers can do
this if it's not defined. (The reason for this is that I'm trying to
progressively eliminate use of linker_sets where it hurts modularity and
runtime load capability, and these DATA_SET's keep getting in the way.)

Use COMPAT_PCI_DRIVER() for registration if it exists. This shouldn't
hurt the driver portability to 3.x too much for where drivers are shared.

Switch type of vxintr instead of using the previous casts.

Requested by: bde

Silence warning by casting vxintr to correct type

vxalloc() can return NULL. Deal with it.

pci_device pd_probe function changed from returning char * to returning
const char *. Originally I was going to add casts from const char * to
char * in some of the pci device drivers, but the reality is that the
pci device probes return constant quoted strings.

Import the (Fast) Etherlink XL driver. I'm reasonally confident in its
stability now. ALso modify /sys/conf/files, /sys/i386/conf/GENERIC
and /sys/i386/conf/LINT to add entries for the XL driver. Deactivate
support for the XL adapters in the vortex driver. LAstly, add a man
page.

(Also added an MLINKS entry for the ThunderLAN man page which I forgot
previously.)

Removed unused #includes.

Make INET a proper option.

This will not make any of object files that LINT create change; there
might be differences with INET disabled, but hardly anything compiled
before without INET anyway. Now the 'obvious' things will give a
proper error if compiled without inet - ipx_ip, ipfw, tcp_debug. The
only thing that _should_ work (but can't be made to compile reasonably
easily) is sppp :-(

This commit move struct arpcom from <netinet/if_ether.h> to
<net/if_arp.h>.

Yank the casts.

Add a cast to eliminate a compiler warning.

Don't cast function pointers to (void *). This will cause warnings.
They should be fixed when similar warnings for the general interrupt
attach routines are fixed.

Removed unused #include.

Some imporvemnets to the vx driver.
1. 'connector_table' is shortened to 'conn_tab'.
2. More reliable connector change code.
3. Display message like "vx0: selected bnc. (link1)"
when the connector changed by link[012].
4. Handle MII properly.
5. Potentially slightly better performance.
6. Fixed a silly typo.

Submitted by: Naoki Hamada <nao@sbl.cl.nec.co.jp>

New vx driver for:

3COM 3C590 Etherlink III PCI,
3COM 3C595 Fast Etherlink PCI,
3COM 3C592 Etherlink III EISA,
3COM 3C590 Fast Etherlink EISA,
3COM 3C900 Etherlink XL PCI and
3COM 3C905 Fast Etherlink XL PCI.

This driver is based on OpenBSD's driver. I modified it to run under FreeBSd
and made it actually work usefully.
Afterwards, nao@tom-yam.or.jp (HAMADA Naoki) added EISA support as well as
early support for 3C900 Etherlink XL PCI and 3C905 Fast Etherlink XL PCI.
He also split up the driver in a bus independant and bus dependant parts.

Especially the 3c59X support should be pretty stable now.

Submitted by: partly nao@tom-yam.or.jp (HAMADA Naoki)
Obtained from:partly OpenBSD