#
296373 |
|
04-Mar-2016 |
marius |
- Copy stable/10@296371 to releng/10.3 in preparation for 10.3-RC1 builds. - Update newvers.sh to reflect RC1. - Update __FreeBSD_version to reflect 10.3. - Update default pkg(8) configuration to use the quarterly branch.
Approved by: re (implicit) |
#
278507 |
|
10-Feb-2015 |
hselasky |
MFC r278071: Section 3.2.9 in the XHCI specification about control transfers says that we should use a normal-TRB if there are more TRBs extending the data-stage TRB. Add a dedicated state bit to the internal USB transfer flags to handle this case.
|
#
266575 |
|
23-May-2014 |
hselasky |
MFC r265358, r265427, r265777, r265783, r265806, r265872, r266012 and r266394:
- Multiple DWC OTG host mode related fixes, improvements and optimisations. - Add full support for ISOCHRONOUS transfers to the DWC OTG driver. - Use the interrupt filter to handle basic USB FIFO interrupts. - Fixed unbalanced unlock in case of "dwc_otg_init_fifo()" failure. - Add common spinlock to the USB bus structure.
|
#
263643 |
|
22-Mar-2014 |
hselasky |
MFC r263159: Workaround for USB MIDI adapters which use non-supported values of wMaxPacketSize for BULK endpoints.
|
#
256281 |
|
10-Oct-2013 |
gjb |
Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
246123 |
|
30-Jan-2013 |
hselasky |
Provide one global language string descriptor for american english instead of giving each module its own.
Submitted by: Christoph Mallon
|
#
239214 |
|
12-Aug-2012 |
hselasky |
Add support for the so-called streams feature of BULK endpoints in SUPER-speed mode, USB 3.0.
This feature has not been tested yet, due to lack of hardware.
This feature is useful when implementing protocols like UASP, USB attached SCSI which promises higher USB mass storage throughput.
This patch also implements support for hardware processing of endpoints for increased performance. The switching to hardware processing of an endpoint is done via a callback to the USB controller driver. The stream feature is implemented like a variant of a hardware USB protocol.
USB controller drivers implementing device mode needs to be updated to implement the new "xfer_stall" USB controller method and remove the "xfer" argument from the "set_stall" method.
The API's toward existing USB drivers are preserved. To setup a USB transfer in stream mode, set the "stream_id" field of the USB config structure to the desired value.
The maximum number of BULK streams is currently hardcoded and limited to 8 via a define in usb_freebsd.h.
All USB drivers should be re-compiled after this change.
LibUSB will be updated next week to support streams mode. A new IOCTL to setup BULK streams as already been implemented. The ugen device nodes currently only supports stream ID zero.
The FreeBSD version has been bumped.
MFC after: 2 weeks
|
#
199672 |
|
22-Nov-2009 |
thompsa |
Improve High Speed slot allocation mechanism by moving the computation to the endpoint rather than per xfer and provide functions around get/free of resources.
Submitted by: Hans Petter Selasky
|
#
199059 |
|
08-Nov-2009 |
thompsa |
improve support for high speed isochronous endpoints which does not run 1:1, but needs intervalling 1:2, 1:4 or 1:8
Submitted by: Hans Petter Selasky
|
#
198775 |
|
01-Nov-2009 |
thompsa |
Fix a corner case where usbd_transfer_drain() can return too early if the callback has dropped the mutex, leading to a panic.
Submitted by: HPS MFC after: 3 days
|
#
196219 |
|
14-Aug-2009 |
jhb |
Purge mergeinfo from files that were temporarily renamed while USB2 was imported into the tree alongside USB.
Approved by: re (mergeinfo blanket)
|
#
194677 |
|
23-Jun-2009 |
thompsa |
- Make struct usb_xfer opaque so that drivers can not access the internals - Reduce the number of headers needed for a usb driver, the common case is just usb.h and usbdi.h
|
#
194230 |
|
15-Jun-2009 |
thompsa |
Fix _USB2_* refernces in the header protection defines.
|
#
194228 |
|
15-Jun-2009 |
thompsa |
s/usb2_/usb_|usbd_/ on all function names for the USB stack.
|
#
194227 |
|
15-Jun-2009 |
thompsa |
Remove usb2_cv_* and just use the kernel condvar implementation, it was needed earlier since condition variables didnt work with Giant but this was fixed 10 months ago.
|
#
194064 |
|
12-Jun-2009 |
thompsa |
Minor device side improvement. Make sure a not complete state gets paired with a complete state in device side mode for the default control endpoint.
Submitted by: Hans Petter Selasky
|
#
193733 |
|
08-Jun-2009 |
thompsa |
Change driver_info to a ulong as it always stores a number and remove the only diff of the usb_device_id struct to Linux.
Reviewed by: HPS
|
#
193644 |
|
07-Jun-2009 |
thompsa |
Rename usb pipes to endpoints as it better represents what they are, and struct usb_pipe may be used for a different purpose later on.
|
#
193074 |
|
30-May-2009 |
thompsa |
Revert the size_t part of the last commit for the moment, this blows up the USB_ADD_BYTES macro.
|
#
193045 |
|
29-May-2009 |
thompsa |
s/usb2_/usb_/ on all typedefs for the USB stack.
|
#
192984 |
|
28-May-2009 |
thompsa |
s/usb2_/usb_/ on all C structs for the USB stack.
|
#
192938 |
|
27-May-2009 |
thompsa |
Allocate the usb serial, manufacturer and product strings rather than use char arrays in the usb_device struct. This also eliminates USB_HAVE_STRINGS.
|
#
192552 |
|
21-May-2009 |
thompsa |
Improve device mode (gadget) stall handling.
Some hardware easily comes out of sync with regard to whether the current or the next control transfer should be stalled, if a stall command is always issued before receiving the SETUP packet. After this patch the stall command will only be issued when a transfer should actually be stalled.
Submitted by: Hans Petter Selasky
|
#
192500 |
|
21-May-2009 |
thompsa |
Use enums for speed and rev data types.
|
#
192499 |
|
21-May-2009 |
thompsa |
- rename usb2_mode to usb_mode [1] - change variable types to use the enum
Submitted by: Hans Petter Selasky [1]
|
#
192056 |
|
13-May-2009 |
thompsa |
Add parenthesis around the xfer macro argument.
Submitted by: Hans Petter Selasky
|
#
191824 |
|
05-May-2009 |
thompsa |
Revert part of r191494 which used the udev state to mark suspending, this needs to be set via two variables (peer_suspended and self_suspended) and can not be merged into one.
Submitted by: Hans Petter Selasky Pointy hat: me
|
#
191498 |
|
25-Apr-2009 |
thompsa |
Make the state string descriptions public.
|
#
191494 |
|
25-Apr-2009 |
thompsa |
Track the usb device state as its powered on, addressed and configured. This helps to avoid touching the device when it is not going to respond and would otherwise timeout.
Implement the suspend tracking as a udev state too.
|
#
191402 |
|
22-Apr-2009 |
thompsa |
MFp4 //depot/projects/usb@160930
Change the roothub exec functions to take the usb request and data pointers directly rather than placing them on the parent bus struct.
Submitted by: Hans Petter Selasky
|
#
190754 |
|
06-Apr-2009 |
thompsa |
Provide a better commit log for r190735, forced by making a whitespace change.
Refactor how we interface with the root HUB. This is achieved by making a direct call from usb2_do_request to the host controller for root hub requests, this call will perform the controller specific register read/writes and return the error code.
This cuts out a lot of code in the host controller files and saves one thread per USB bus.
Submitted by: Hans Petter Selasky
|
#
190749 |
|
05-Apr-2009 |
piso |
Remove pointeless mergeinfo that crept in from r190633.
|
#
190735 |
|
05-Apr-2009 |
thompsa |
MFp4 //depot/projects/usb@159922
Refactor how we interface with the root HUB. This cuts around 1200 lines of code totally and saves one thread per USB bus.
Submitted by: Hans Petter Selasky
|
#
190734 |
|
05-Apr-2009 |
thompsa |
MFp4 //depot/projects/usb@159909
- make usb2_power_mask_t 16-bit - remove "usb2_config_sub" structure from "usb2_config". To compensate for this "usb2_config" has a new field called "usb_mode" which select for which mode the current xfer entry is active. Options are: a) Device mode only b) Host mode only (default-by-zero) c) Both modes. This change was scripted using the following sed script: "s/\.mh\././g". - the standard packet size table in "usb_transfer.c" is now a function, hence the code for the function uses less memory than the table itself.
Submitted by: Hans Petter Selasky
|
#
190633 |
|
01-Apr-2009 |
piso |
Implement an ipfw action to reassemble ip packets: reass.
|
#
190581 |
|
30-Mar-2009 |
mav |
Integrate user/mav/ata branch:
Add ch_suspend/ch_resume methods for PCI controllers and implement them for AHCI. Refactor AHCI channel initialization according to it.
Fix Port Multipliers operation. It is far from perfect yet, but works now. Tested with JMicron JMB363 AHCI + SiI 3726 PMP pair. Previous version was also tested with SiI 4726 PMP.
Hardware sponsored by: Vitsch Electronics / VEHosting.nl
|
#
190185 |
|
20-Mar-2009 |
thompsa |
MFp4 //depot/projects/usb
Sync usb_core.h after header changes.
Submitted by: Hans Petter Selasky
|
#
190181 |
|
20-Mar-2009 |
thompsa |
MFp4 //depot/projects/usb @159431,159437,159438
- start using the new USB typedefs in the USB core - Remove usage of USB_ADD_BYTES()
Submitted by: Hans Petter Selasky
|
#
190180 |
|
20-Mar-2009 |
thompsa |
MFp4 //depot/projects/usb@159392
Add ifdefs for making parts of usb conditional.
Submitted by: Hans Petter Selasky
|
#
190174 |
|
20-Mar-2009 |
thompsa |
MFp4 //depot/projects/usb @159430
- Move tunable defines into usb_core.h and dependancy towards usb_defs.h - Leave hardcoded defines in "usb_defs.h". - Allow overriding all tunable defines. - Add more customisable typedefs. - Correct maximum device number.
Submitted by: Hans Petter Selasky
|
#
189599 |
|
09-Mar-2009 |
thompsa |
MFp4 //depot/projects/usb 158942,158948
Allow USB to be compiled without ugen support.
Submitted by: Hans Petter Selasky
|
#
189110 |
|
27-Feb-2009 |
thompsa |
Change USB over to make_dev() for all device nodes, previously it hooked into the devfs clone handler to open the (invisible) devices on the fly.
The /dev entries are layed out as follows,
/dev/usbctl = master device /dev/usb/0.1.0.5 = usb device, (<bus>.<dev>.<iface>.<endpoint>) /dev/ugen0.1 -> usb/0.1.0.0 = ugen link to ctrl endpoint
This also removes the custom permissions model from USB. Bump __FreeBSD_version to 800066.
Submitted by: rink (earlier version)
|
#
188983 |
|
24-Feb-2009 |
thompsa |
MFp4 //depot/projects/usb@157853
Clean up old way of polling the USB hardware. The existing polling support was a bit hackish.
Submitted by: Hans Petter Selasky
|
#
188942 |
|
23-Feb-2009 |
thompsa |
Move the new USB stack into its new home.
|
#
188600 |
|
13-Feb-2009 |
thompsa |
MFp4 //depot/projects/usb; 157501, 157608, 157609
- Make usb2_transfer_pending() part of the USB core header file. - Make usb2_transfer_pending() NULL safe. - Make sure that USB process functions return if the process has been drained. - Remove two unused functions.
Submitted by: Hans Petter Selasky
|
#
188411 |
|
09-Feb-2009 |
thompsa |
MFp4 //depot/projects/usb; 157069, 157429, 157430
- Change "usb2_pause_mtx" so that it takes the timeout value in ticks - Factor out USB ethernet and USB serial driver specific control request. - USB process naming cleanup.
Submitted by: Hans Petter Selasky
|
#
187173 |
|
13-Jan-2009 |
thompsa |
MFp4: //depot/projects/usb@155839
This change is about removing three fields from "struct usb2_xfer" which can be reached from "struct usb2_xfer_root" instead and cleaning up the code after this change. The fields are "xfer->udev", "xfer->xfer_mtx" and "xfer->usb2_sc". In this process the following changes were also made: Rename "usb2_root" to "xroot" which is short for "xfer root". Rename "priv_mtx" to "xfer_mtx" in USB core. The USB_XFER_LOCK and USB_XFER_UNLOCK macros should only be used in the USB core due to dependency towards "xroot". Substitute macros for the real lock in two USB device drivers.
Submitted by: Hans Petter Selasky
|
#
187171 |
|
13-Jan-2009 |
thompsa |
MFp4: //depot/projects/usb@155829
Code style changes requested by: M. Warner Losh
Submitted by: Hans Petter Selasky
|
#
186730 |
|
04-Jan-2009 |
alfred |
Sync with usb4bsd:
src/lib/libusb20/libusb20_desc.c
Make "libusb20_desc_foreach()" more readable.
src/sys/dev/usb2/controller/*.[ch] src/sys/dev/usb2/core/*.[ch]
Implement support for USB power save for all HC's.
Implement support for Big-endian EHCI.
Move Huawei quirks back into "u3g" driver.
Improve device enumeration.
src/sys/dev/usb2/ethernet/*[ch]
Patches for supporting new AXE Gigabit chipset.
src/sys/dev/usb2/serial/*[ch]
Fix IOCTL return code.
src/sys/dev/usb2/wlan/*[ch]
Sync with old USB stack.
Submitted by: hps
|
#
185948 |
|
11-Dec-2008 |
thompsa |
Format and wrap function declarations.
|
#
185087 |
|
19-Nov-2008 |
alfred |
src/sys/dev/usb2/controller/uss820dci_pccard.c src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h
These files are not used any more.
src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist
Make "usbconfig" and "libusb20" a part of the default build.
src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c
Use common include file.
src/sys/dev/usb2/bluetooth/ng_ubt2.c
Make USB bluetooth depend on "ng_hci" module.
src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h
Patches for Marvell EHCI.
src/sys/dev/usb2/core/usb2_busdma.c
Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases.
src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h
Bugfix for libusb filesystem interface.
New feature: Add support for filtering device data at the expense of the userland process.
Add some more comments.
Some minor code styling.
Remove unused function, usb2_fifo_get_data_next().
Fix an issue about "fifo_index" being used instead of "ep_index".
src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c
Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting.
Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting.
src/sys/dev/usb2/core/usb2_hub.c
Improvement: Check all USB HUB ports by default at least one time.
src/sys/dev/usb2/core/usb2_request.c
Bugfix: Make sure destination ASCII string is properly zero terminated in all cases.
Improvement: Skip invalid characters instead of replacing with a dot.
src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c
Spelling.
src/sys/dev/usb2/include/Makefile
Share "usbdevs" with the old USB stack.
src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h
Regenerate files.
Alfred: Please fix the RCS tag at the top.
src/sys/dev/usb2/include/usb2_ioctl.h
Fix compilation of "kdump".
src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c
Remove device ID's which will end up in a new 3G driver.
src/sys/dev/usb2/sound/uaudio2.c
Correct a debug printout.
src/sys/dev/usb2/storage/umass2.c
Sync with old USB stack.
src/lib/libusb20/libusb20.3
Add more documentation.
src/lib/libusb20/libusb20.c
Various bugfixes and improvements.
src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c
New commands for dumping strings and doing custom USB requests from the command line.
Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
|
#
184824 |
|
10-Nov-2008 |
thompsa |
Convert the two main locking areas into macros to make it clear on what we are grabbing and why. These are now:
USB_BUS_LOCK/USB_BUS_UNLOCK USB_XFER_LOCK/USB_XFER_UNLOCK
Reviewed by: alfred
|
#
184610 |
|
04-Nov-2008 |
alfred |
Bring in USB4BSD, Hans Petter Selasky rework of the USB stack that includes significant features and SMP safety.
This commit includes a more or less complete rewrite of the *BSD USB stack, including Host Controller and Device Controller drivers and updating all existing USB drivers to use the new USB API:
1) A brief feature list:
- A new and mutex enabled USB API.
- Many USB drivers are now running Giant free.
- Linux USB kernel compatibility layer.
- New UGEN backend and libusb library, finally solves the "driver unloading" problem. The new BSD licensed libusb20 library is fully compatible with libusb-0.1.12 from sourceforge.
- New "usbconfig" utility, for easy configuration of USB.
- Full support for Split transactions, which means you can use your full speed USB audio device on a high speed USB HUB.
- Full support for HS ISOC transactions, which makes writing drivers for various HS webcams possible, for example.
- Full support for USB on embedded platforms, mostly cache flushing and buffer invalidating stuff.
- Safer parsing of USB descriptors.
- Autodetect of annoying USB install disks.
- Support for USB device side mode, also called USB gadget mode, using the same API like the USB host side. In other words the new USB stack is symmetric with regard to host and device side.
- Support for USB transfers like I/O vectors, means more throughput and less interrupts.
- ... see the FreeBSD quarterly status reports under "USB project"
2) To enable the driver in the default kernel build:
2.a) Remove all existing USB device options from your kernel config file.
2.b) Add the following USB device options to your kernel configuration file:
# USB core support device usb2_core
# USB controller support device usb2_controller device usb2_controller_ehci device usb2_controller_ohci device usb2_controller_uhci
# USB mass storage support device usb2_storage device usb2_storage_mass
# USB ethernet support, requires miibus device usb2_ethernet device usb2_ethernet_aue device usb2_ethernet_axe device usb2_ethernet_cdce device usb2_ethernet_cue device usb2_ethernet_kue device usb2_ethernet_rue device usb2_ethernet_dav
# USB wireless LAN support device usb2_wlan device usb2_wlan_rum device usb2_wlan_ral device usb2_wlan_zyd
# USB serial device support device usb2_serial device usb2_serial_ark device usb2_serial_bsa device usb2_serial_bser device usb2_serial_chcom device usb2_serial_cycom device usb2_serial_foma device usb2_serial_ftdi device usb2_serial_gensa device usb2_serial_ipaq device usb2_serial_lpt device usb2_serial_mct device usb2_serial_modem device usb2_serial_moscom device usb2_serial_plcom device usb2_serial_visor device usb2_serial_vscom
# USB bluetooth support device usb2_bluetooth device usb2_bluetooth_ng
# USB input device support device usb2_input device usb2_input_hid device usb2_input_kbd device usb2_input_ms
# USB sound and MIDI device support device usb2_sound
2) To enable the driver at runtime:
2.a) Unload all existing USB modules. If USB is compiled into the kernel then you might have to build a new kernel.
2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same base name like the kernel device option.
Submitted by: Hans Petter Selasky hselasky at c2i dot net Reviewed by: imp, alfred
|