- Copy stable/10@296371 to releng/10.3 in preparation for 10.3-RC1
builds.
- Update newvers.sh to reflect RC1.
- Update __FreeBSD_version to reflect 10.3.
- Update default pkg(8) configuration to use the quarterly branch.

Approved by: re (implicit)

MFC r275944, r275946, r275949, r275950:

Add code to set and reset open-drain mode on the bus when requested.

When command and data interrupts have been aggregated together, don't do
the data-completed processing if a command-error interrupt is also asserted.

Add a new sdhci quirk, SDHCI_QUIRK_WAITFOR_RESET_ASSERTED, to work around
TI OMAP controllers which will return the reset-in-progress bit as zero if
you read the status register too fast after setting the reset bit.

MFC: r270885, r270948

- Nuke unused sdhci_softc.
- Static'ize sdhci_debug local to sdhci.c.
- Const'ify PCI device description strings.
- Nuke redundant resource ID members from sdhci_pci_softc.
- Nuke unused hw.sdhci_pci.debug tunable.
- Add support for using MSI instead of INTx, controllable via the tunable
hw.sdhci.enable_msi (defaulting to on) and tested with a RICOH R5CE823 SD
controller.
- Use NULL instead of 0 for pointers.

MFC r264096, r264097, r264099 r264100, r264101, r264102, r264119:

Fixes to the ti_sdhci and sdhci drivers (fix clock divisor calcs).

Use the ti_sdhci driver instead of ti_mmchs for Pandaboard.

MFC r261410

Follow r261352 by updating all drivers which are children of simplebus
to check the status property in their probe routines.

MFC r258356:

Bugfixes... the host capabilties from FDT data are stored in host.caps, not
host.host_ocr, examine the correct field when setting up the hardware. Also,
the offset for the capabilties register should be 0x140, not 0x240.

MFC r257518, r257519:

TI sdhci driver improvements, mostly related to fdt data...

Use the published compatible strings (our own invention, "ti,mmchs" is
still accepted as well, for now).

Don't blindly turn on 8-bit bus mode, because even though the controller
supports it, the board has to be wired appropriately as well. Use the
published property (bus-width=<n>) and honor all the valid values (1,4,8).

The eMMC device on a Beaglebone Black is wired for 8-bit, update the dts.

The mmchs controller can inherently do both 1.8v and 3.0v on the first
device and 1.8v only on other devices, unless an external transceiver is
used. Set the voltage automatically for the first device and honor
the published fdt property (ti,dualvolt) for other devices.

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Make the standard sdhci(4) driver work for the TI OMAP family SoCs.
The MMCHS hardware is pretty much a standard SDHCI v2.0 controller with a
couple quirks, which are now supported by sdhci(4) as of r254507.

This should work for all TI SoCs that use the MMCHS hardware, but it has
only been tested on AM335x right now, so this enables it on those platforms
but leaves the existing ti_mmchs driver in place for other OMAP variants
until they can be tested.

This initial incarnation lacks DMA support (coming soon). Even without it
this improves performance pretty noticibly over the ti_mmchs driver,
primarily because it now does multiblock IO.