- Copy stable/10@296371 to releng/10.3 in preparation for 10.3-RC1
builds.
- Update newvers.sh to reflect RC1.
- Update __FreeBSD_version to reflect 10.3.
- Update default pkg(8) configuration to use the quarterly branch.

Approved by: re (implicit)

MFC r268838, r277644:

Add support for Toradex Apalis i.MX6 development board.

Add support for imx6 audio transmitting, include drivers for:
o Digital Audio Multiplexer (AUDMUX)
o Smart Direct Memory Access Controller (SDMA)
o Synchronous Serial Interface (SSI)

MFC r277454, r277460, r277465, r277466, r277467, r277469, r277470, r277471,
r277472, r277473, r277474, r277475, r277476, r277477, r277478, r277479,
r277480, r277512, r277516:

Add inline implementations of arm bus_space_read/write_N().

Revise the arm bus_space implementation to avoid dereferencing the tag on
every operation to retrieve the bs_cookie value almost nothing actually uses.

Use the explicit member initializer style to init the bus_space struct.

Use arm/bus_space-v6.c for all armv6 systems

Consolidate many identical implementations of bus_space to a single
common tag and implementation shared by armv4 and armv6.

Micro-optimize the new arm inline bus_space implementation by grouping all
the data the inline functions access together at the start of the bus_space
struct so that they all fit in a single cache line.

MFC r257740, r257739: Switch to using common armv6 bus_space tag.

MFC r271595, r271601, r271607, r271630:

Add compat strings for all the flavors of GIC this driver should support.
Also allow the driver to attach to ofwbus as well as simplebus, some FDT
data puts the root interrupt controller on the root bus.

Add a common routine for parsing FDT data describing an ARM GIC interrupt.

Use gic_decode_fdt() rather than a local routine to parse fdt interrupt
properties. Move fdt_pic_table and fdt_fixup_table into imx6_machdep.c,
which means imx6 doesn't need imx_common.c anymore.

The private peripheral interrupts start at offset 16, not 0. Also, use
names rather than inline mystery constants for these offsets.

MFC r271550, r271591:

Replace the imx5 and imx6 iomux drivers with a single common driver that
uses the new fdt_pinctrl interface.

MFC r271097, r271100, r271101, r271102, r271124:

- Add a basic iomux driver for imx6.
- Implement the same public interface in imx51 and imx6 iomux
- The iomux driver is no longer optional, remove it from kernel configs.
- Implement the imx_iomux_get/set_gpr() interface for imx6.
- Stop setting the iomux device status to disabled, now that we have a driver.

MFC r268973, r268977: Rename i.MX I2C driver file, enable it on imx6.

MFC r268834, r268835:

o Enable GPIO device driver for i.MX6.
It was originally written for i.MX5 and compatible with newer chip.
o Extend device tree information
o style(9) fixes
o Rename gpio driver file.

MFC 264054, 264056

Switch imx6 to using the mpcore per-cpu event timers, but continue to use
the GPT timer, which is fixed-frequency, as a timecounter.

Change NO_EVENTTIMERS from an arm-specific to an MI option, so that it can
be used in MI code.

MFC 262952, 262958, 262966, 262979, 262980, 262986, 262987, 262995, 262997,
263030, 263033, 263034, 263056, 263057,

Remove all the redundant external declarations of exception vectors and
runtime setting of the pointers that's scattered around various places.

Remove all traces of support for ARM chips prior to the arm9 series.

Make the default exception handler vectors point to where I thought they
were already pointing: the default handlers (not a panic that says there
is no default handler).

Eliminate irq_dispatch.S. Move the data items it contained into
arm/intr.c and the functionality it provided into arm/exception.S.

Move the exception vector table (so-called "page0" data) into exception.S
and eliminate vectors.S.

Change the way the asm GET_CURTHREAD_PTR() macro is defined so that code
using it doesn't have to have an "AST_LOCALS" macro somewhere in the file.

Arrange for arm fork_trampoline() to return to userland via the standard
swi_exit code in exception.S instead of having its own inline expansion
of the DO_AST and PULLFRAME macros.

Now that the PUSHFRAME and PULLFRAME macros are used only in the swi
entry/exit code, they don't need to be macros. Except that didn't work
and the whole change was reverted.

Remove some unnecessary indirection and jump right to the handler functions.

Use panic rather than printf to "handle" an arm26 address exception
(should never happen on arm32).

Remove the unreferenced DATA() macro.

Remove #include <machine/asmacros.h> from files that don't need it.

MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
262925, 262929, 262932, 262935, 262940, 262941, 262942, 262948, 262949,
262950

Strip arm/conf/DEFAULTS down to just items that are mandatory for running
the architecture.

Move all the files named foo/common.c to foo/foo_common.c

Initial cut for DTS on the hl201 board.

Add commented out dts for sam9260ek as well as early printf support.

Make clock optional on uart nodes, then back it out ("I don't know what I
was thinking, but it is lame.")

Set the baud rate if it isn't 0

Make at91_soc_id() public.

Properly round at91 resource on unmapping.

Move AT91 AIC related stuff to own file.

Fix another bug in multicast filtering. i.MX uses 6 bits from MSB in
LE CRC32 for the hash value, not the lowest 6 bits in BE CRC32.

Follow r262916 with one more config file that references a renamed common.c

Remove bogus AT91 define that causes compile errors. Most of the defines
for SAM9X are going away soonish anyway (once FDT works), but until
then...

Remove all dregs of a per-thread undefined-exception-mode stack.

Rework the VFP code that handles demand-based save and restore of state.

Always call vfp_discard() on thread death.

When a thread begins life it doesn't own the VFP hardware state on any cpu.

Make undefined exception entry MP-safe.

MFC r262409, r262411, r262413, r262420, r262426, r262427, r262440, r262456,
r262482, r262483, r262531,

Move the declaration for mpentry() into a header file instead of pasting
it into a bunch of different .c files.

If the L2 cache type is PIPT, pass a physical address for a flush.

Actually set the proper bit to indicate TTB shared memory.

Add a new cache maintenance function, idcache_inv_all, to the table, and
implementations for each of the chips we support.

Invalidate caches immediately upon entry to init_secondary(). Also set
the Bufferable bit in the PDE entries of the secondary processor startup
pagetables.

Add the bits needed to run SMP on imx6.

Invalidate the SCU cache tag ram on all 4 cores, not just 1-3.

Minor tweaks to the imx GPT timer

Vybrid enhancements...
- Pin configuration is a complete iomux register now and includes
drive strength, pull mode, mux mode, speed, etc.
- Add i2c devices to the tree
- Add IPG clock
- Add support for Quartz Module.
- Pin configuration is a complete iomux register now and includes
drive strength, pull mode, mux mode, speed, etc.
- Add i2c devices to the tree
- Add IPG clock

MFC r261938, r261939, r261940, r261944, r261945, r261946, r261947, r261956, r261957, r261983, r261094,
r261955, r261958,

Add a driver to provide access to imx6 on-chip one-time-programmble data.

Make it possible to access the ocotp registers before the ocotp device
is attached, by establishing a temporary mapping of the registers when
necessary.

It turns out Freescale cleverly made the ocotp device compatible across
several different families of SoCs, so move it to the freescale directory
and prefix everything with fsl rather than imx6.

Convert the imx6 sdhci "R1B fix" from a busy-loop in the interrupt handler
to a callout.

Increase the wait time for acquiring the SD bus from 10 to 250ms.

If no compatible cards were found after probing the SD bus, say so.

Add timeout logic to sdhci, separate from the timeouts done by the hardware.

After a timeout, reset the controller using SDHCI_RESET_CMD|SDHCI_RESET_DATA
rather than SDHCI_RESET_ALL; the latter turns off clocks and power, removing
any possibility of recovering from the error.

Add a helper routine to depth-search the device tree for a node with a
matching 'compatible' property.

MFC r259270

After r266105 ofw_iicbuc.c will be built by default for any kernel which
includes options 'iicbus' and 'fdt'. Remove the (now) unnecessary entries.

MFC r257483, r257486, r257489:

Add the Soc- / machine-dependent parts of imx6 support.
Add dts source for imx6 SoCs and for Wandboard boards.
Add kernel config for Wandboard.

Add the Soc- / machine-dependent parts of imx6 support.