- Copy stable/10@296371 to releng/10.3 in preparation for 10.3-RC1
builds.
- Update newvers.sh to reflect RC1.
- Update __FreeBSD_version to reflect 10.3.
- Update default pkg(8) configuration to use the quarterly branch.

Approved by: re (implicit)

MFC r277454, r277460, r277465, r277466, r277467, r277469, r277470, r277471,
r277472, r277473, r277474, r277475, r277476, r277477, r277478, r277479,
r277480, r277512, r277516:

Add inline implementations of arm bus_space_read/write_N().

Revise the arm bus_space implementation to avoid dereferencing the tag on
every operation to retrieve the bs_cookie value almost nothing actually uses.

Use the explicit member initializer style to init the bus_space struct.

Use arm/bus_space-v6.c for all armv6 systems

Consolidate many identical implementations of bus_space to a single
common tag and implementation shared by armv4 and armv6.

Micro-optimize the new arm inline bus_space implementation by grouping all
the data the inline functions access together at the start of the bus_space
struct so that they all fit in a single cache line.

MFC r257740, r257739: Switch to using common armv6 bus_space tag.

MFC r271550, r271591:

Replace the imx5 and imx6 iomux drivers with a single common driver that
uses the new fdt_pinctrl interface.

MFC r271097, r271100, r271101, r271102, r271124:

- Add a basic iomux driver for imx6.
- Implement the same public interface in imx51 and imx6 iomux
- The iomux driver is no longer optional, remove it from kernel configs.
- Implement the imx_iomux_get/set_gpr() interface for imx6.
- Stop setting the iomux device status to disabled, now that we have a driver.

MFC r268973, r268977: Rename i.MX I2C driver file, enable it on imx6.

MFC r268834, r268835:

o Enable GPIO device driver for i.MX6.
It was originally written for i.MX5 and compatible with newer chip.
o Extend device tree information
o style(9) fixes
o Rename gpio driver file.

MFC 264251: Updates to i.MX53:

* Define support for the SDHCI driver, although it doesn't work yet
* Fix the memory mappings for IPU

MFC 264180, 264181, 264182:

Follow files.imx51 and add vt support for imx53.

Add fsl,imx53 compatible string.

Need to include machine/fdt.h in vt_early_fb.c

MFC 262952, 262958, 262966, 262979, 262980, 262986, 262987, 262995, 262997,
263030, 263033, 263034, 263056, 263057,

Remove all the redundant external declarations of exception vectors and
runtime setting of the pointers that's scattered around various places.

Remove all traces of support for ARM chips prior to the arm9 series.

Make the default exception handler vectors point to where I thought they
were already pointing: the default handlers (not a panic that says there
is no default handler).

Eliminate irq_dispatch.S. Move the data items it contained into
arm/intr.c and the functionality it provided into arm/exception.S.

Move the exception vector table (so-called "page0" data) into exception.S
and eliminate vectors.S.

Change the way the asm GET_CURTHREAD_PTR() macro is defined so that code
using it doesn't have to have an "AST_LOCALS" macro somewhere in the file.

Arrange for arm fork_trampoline() to return to userland via the standard
swi_exit code in exception.S instead of having its own inline expansion
of the DO_AST and PULLFRAME macros.

Now that the PUSHFRAME and PULLFRAME macros are used only in the swi
entry/exit code, they don't need to be macros. Except that didn't work
and the whole change was reverted.

Remove some unnecessary indirection and jump right to the handler functions.

Use panic rather than printf to "handle" an arm26 address exception
(should never happen on arm32).

Remove the unreferenced DATA() macro.

Remove #include <machine/asmacros.h> from files that don't need it.

MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
262925, 262929, 262932, 262935, 262940, 262941, 262942, 262948, 262949,
262950

Strip arm/conf/DEFAULTS down to just items that are mandatory for running
the architecture.

Move all the files named foo/common.c to foo/foo_common.c

Initial cut for DTS on the hl201 board.

Add commented out dts for sam9260ek as well as early printf support.

Make clock optional on uart nodes, then back it out ("I don't know what I
was thinking, but it is lame.")

Set the baud rate if it isn't 0

Make at91_soc_id() public.

Properly round at91 resource on unmapping.

Move AT91 AIC related stuff to own file.

Fix another bug in multicast filtering. i.MX uses 6 bits from MSB in
LE CRC32 for the hash value, not the lowest 6 bits in BE CRC32.

Follow r262916 with one more config file that references a renamed common.c

Remove bogus AT91 define that causes compile errors. Most of the defines
for SAM9X are going away soonish anyway (once FDT works), but until
then...

Remove all dregs of a per-thread undefined-exception-mode stack.

Rework the VFP code that handles demand-based save and restore of state.

Always call vfp_discard() on thread death.

When a thread begins life it doesn't own the VFP hardware state on any cpu.

Make undefined exception entry MP-safe.

MFC r259270

After r266105 ofw_iicbuc.c will be built by default for any kernel which
includes options 'iicbus' and 'fdt'. Remove the (now) unnecessary entries.

MFC r257383, r257384:

Add some bare-bones support for enabling usb and usbphy clocks.

Add a "no-op" USB PHY driver for imx-family SoCs.

MFC r257197:

Maximize available kva space by doing static device mapping from the top
of the address space downwards, and then returning the lowest mapped
device address from initarm_lastaddr(). Premap most of the device's
on-chip peripherals.

MFC r256806, r256919, r257167:

Add a driver for the Freescale Fast Ethernet Controller found on various
Freescale SoCs including the i.MX series. This also works for the newer
SoCs with the ENET gigabit controller, but doesn't use any of the new
hardware features other than enabling gigabit speed.

Mask out non-address bits in the mac address register, for proper
detection of an all-zeroes address. Also remove a misplaced return.

Switch to using ofw_bus_search_compatible() table-driven compat lookup.
Add compat strings for Freescale Vybrid family SoCs.

MFC r256804:

Switch to using the standard uart console driver instead of the special
driver for early boot debugging.

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Initial support for the Digi ConnectCore(c) i.MX53 / Wi-i.MX53 boards.

There are many drivers missing, but we can reach single user mode now.

Hardware graciously donated by Douglas Beattie.