- Copy stable/10@296371 to releng/10.3 in preparation for 10.3-RC1
builds.
- Update newvers.sh to reflect RC1.
- Update __FreeBSD_version to reflect 10.3.
- Update default pkg(8) configuration to use the quarterly branch.

Approved by: re (implicit)

MFC r270326
Fix a recursive lock acquisition in vi_reset_dev().

MFC r270434
Return the spurious interrupt vector (IRQ7 or IRQ15) if the atpic cannot find
any unmasked pin with an interrupt asserted.

MFC r270436
Fix a bug in the emulation of CPUID leaf 0x4.

MFC r270437
Add "hw.vmm.topology.threads_per_core" and "hw.vmm.topology.cores_per_package"
tunables to modify the default cpu topology advertised by bhyve.

MFC r270855
Set the 'inst_length' to '0' early on before any error conditions are detected
in the emulation of the task switch. If any exceptions are triggered then the
guest %rip should point to instruction that caused the task switch as opposed
to the one after it.

MFC r270857
The "SUB" instruction used in getcc() actually does 'x -= y' so use the
proper constraint for 'x'. The "+r" constraint indicates that 'x' is an
input and output register operand.

While here generate code for different variants of getcc() using a macro
GETCC(sz) where 'sz' indicates the operand size.

Update the status bits in %rflags when emulating AND and OR opcodes.

MFC r271439
Initialize 'bc_rdonly' to the right value.

MFC r271451
Optimize the common case of injecting an interrupt into a vcpu after a HLT
by explicitly moving it out of the interrupt shadow.

MFC r271888
Restructure the MSR handling so it is entirely handled by processor-specific
code.

MFC r271890
MSR_KGSBASE is no longer saved and restored from the guest MSR save area. This
behavior was changed in r271888 so update the comment block to reflect this.

MFC r271891
Add some more KTR events to help debugging.

MFC r272197
mmap(2) requires either MAP_PRIVATE or MAP_SHARED for non-anonymous mappings.

MFC r272395
Get rid of code that dealt with the hardware not being able to save/restore
the PAT MSR on guest exit/entry. This workaround was done for a beta release
of VMware Fusion 5 but is no longer needed in later versions.

All Intel CPUs since Nehalem have supported saving and restoring MSR_PAT
in the VM exit and entry controls.

MFC r272670
Inject #UD into the guest when it executes either 'MONITOR' or 'MWAIT'.

MFC r272710
Implement the FLUSH operation in the virtio-block emulation.

MFC r272838
iasl(8) expects integer fields in data tables to be specified as hexadecimal
values. Therefore the bit width of the "PM Timer Block" was actually being
interpreted as 50-bits instead of the expected 32-bit.

This eliminates an error message emitted by a Linux 3.17 guest during boot:
"Invalid length for FADT/PmTimerBlock: 50, using default 32"

MFC r272839
Support Intel-specific MSRs that are accessed when booting up a linux in bhyve:
- MSR_PLATFORM_INFO
- MSR_TURBO_RATIO_LIMITx
- MSR_RAPL_POWER_UNIT

MFC r273108
Emulate "POP r/m". This is needed to boot OpenBSD/i386 MP kernel in bhyve.

MFC r273212
Support stopping and restarting the AHCI command list via toggling PxCMD.ST
from '1' to '0' and back. This allows the driver a chance to recover if
for instance a timeout occurred due to activity on the host.

MFC r267921, r267934, r267949, r267959, r267966, r268202, r268276,
r268427, r268428, r268521, r268638, r268639, r268701, r268777,
r268889, r268922, r269008, r269042, r269043, r269080, r269094,
r269108, r269109, r269281, r269317, r269700, r269896, r269962,
r269989.

Catch bhyve up to CURRENT.

Lightly tested with FreeBSD i386/amd64, Linux i386/amd64, and
OpenBSD/amd64. Still resolving an issue with OpenBSD/i386.

Many thanks to jhb@ for all the hard work on the prior MFCs !

r267921 - support the "mov r/m8, imm8" instruction
r267934 - document options
r267949 - set DMI vers/date to fixed values
r267959 - doc: sort cmd flags
r267966 - EPT misconf post-mortem info
r268202 - use correct flag for event index
r268276 - 64-bit virtio capability api
r268427 - invalidate guest TLB when cr3 is updated, needed for TSS
r268428 - identify vcpu's operating mode
r268521 - use correct offset in guest logical-to-linear translation
r268638 - chs value
r268639 - chs fake values
r268701 - instr emul operand/address size override prefix support
r268777 - emulation for legacy x86 task switching
r268889 - nested exception support
r268922 - fix INVARIANTS build
r269008 - emulate instructions found in the OpenBSD/i386 5.5 kernel
r269042 - fix fault injection
r269043 - Reduce VMEXIT_RESTARTs in task_switch.c
r269080 - fix issues in PUSH emulation
r269094 - simplify return values from the inout handlers
r269108 - don't return -1 from the push emulation handler
r269109 - avoid permanent sleep in vm_handle_hlt()
r269281 - list VT-x features in base kernel dmesg
r269317 - Mark AHCI fatal errors as not completed
r269700 - Support PCI extended config space in bhyve
r269896 - Minor cleanup
r269962 - use max guest memory when creating IOMMU domain
r269989 - fix interrupt mode names

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Add svn properties to the recently merged bhyve source files.

The pre-commit hook will not allow any commits without the svn:keywords
property in head.

Merge projects/bhyve to head.

'bhyve' was developed by grehan@ and myself at NetApp (thanks!).

Special thanks to Peter Snyder, Joe Caradonna and Michael Dexter for their
support and encouragement.

Obtained from: NetApp

First cut at porting the kernel portions of 221828 and 221905 from the
BHyVe reference branch to HEAD.

Import of bhyve hypervisor and utilities, part 1.
vmm.ko - kernel module for VT-x, VT-d and hypervisor control
bhyve - user-space sequencer and i/o emulation
vmmctl - dump of hypervisor register state
libvmm - front-end to vmm.ko chardev interface

bhyve was designed and implemented by Neel Natu.

Thanks to the following folk from NetApp who helped to make this available:
Joe CaraDonna
Peter Snyder
Jeff Heller
Sandeep Mann
Steve Miller
Brian Pawlowski