- Copy stable/10@285827 to releng/10.2 in preparation for 10.2-RC1
builds.
- Update newvers.sh to reflect RC1.
- Update __FreeBSD_version to reflect 10.2.
- Update default pkg(8) configuration to use the quarterly branch.[1]

Discussed with: re, portmgr [1]
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC r261351, r261352, r261355, r261396, r261397, r261398, r261403, r261404,
r261405

Open Firmware interrupt specifiers can consist of arbitrary-length byte
strings and include arbitrary information (IRQ line/domain/sense). When the
ofw_bus_map_intr() API was introduced, it assumed that, as on most systems,
these were either 1 cell, containing an interrupt line, or 2, containing
a line number plus a sense code. It turns out a non-negligible number of
ARM systems use 3 (or even 4!) cells for interrupts, so make this more
general.

Provide a simpler and more standards-compliant simplebus implementation to
get the Routerboard 800 up and running with the vendor device tree. This
does not implement some BERI-specific features (which hopefully won't be
necessary soon), so move the old code to mips/beri, with a higher attach
priority when built, until MIPS interrupt domain support is rearranged.

Allow nesting of simplebuses.

Add a set of helpers (ofw_bus_get_status() and ofw_bus_status_okay()) to
process "status" properties of OF nodes.

Fix one remnant endian flaw in nexus.

MFC r258800, r258802, r258805, r258806, r258807, r258851, r258857,
r259199, r259484, r259513, r259514, r259516

The kernel stack guard pages are only below the stack pointer, not above.

Remove unnecessary double-setting of the thread's onfault state in
copyinstr().

Open Firmware mandates that certain cross-references, in particular those
in /chosen, be ihandles. The ePAPR spec makes those cross-reference phandles,
since FDT has no concept of ihandles. Have the OF FDT CI module interpret
queries about ihandles as cross-reference phandles.

Real OF systems have an ihandle under /chosen/stdout, not a phandle. Use
the right type.

Rearchitect platform memory map parsing to make it less
Open Firmware-centric.

Remove fdtbus_bs_tag definition, which is now obsolete. The remainder of
this file is also slated for future demolition.

Return the correct IEEE 1275 code for "nextprop".

Use the common Open Firmware PCI interrupt routing code instead of the
duplicate version in dev/fdt.

Configure interrupt sense based on device tree information.

Simplify the ofw_bus_lookup_imap() API slightly: make it allocate maskbuf
internally instead of requiring the caller to allocate it.

MFC r256994, r257016, r257055, r257059, r257060, r257075

Add two new interfaces to ofw_bus:
- ofw_bus_map_intr()
Maps an (iparent, IRQ) tuple to a system-global interrupt number in some
platform dependent way. This is meant to be implemented as a replacement
for [FDT_]MAP_IRQ() that is an MI interface that knows about the bus
hierarchy.
- ofw_bus_config_intr()
Configures an interrupt (previously mapped) based on firmware sense flags.
This replaces manual interpretation of the sense field in bus drivers and
will, in a follow-up, allow that interpretation to be redirected to the PIC
drivers where it belongs. This will eventually replace the tables in
/sys/dev/fdt/fdt_ARCH.c

The PowerPC/AIM code has been converted to use these globally, with an
implementation in terms of MAP_IRQ() and powerpc_config_intr(), assuming
OpenPIC, at the bus root in nexus(4). The ofw_bus_config_intr() will shortly
be integrated into pic_if.m and bounced through nexus into the PIC tree.

Factor out MI portions of the PowerPC nexus device into /sys/dev/ofw. The
sparc64 driver will be modified to use this shortly.

Allow PIC drivers to translate firmware sense codes for themselves. This
is designed to replace the tables in dev/fdt/fdt_ARCH.c, but will not
happen quite yet.

Do not map IRQs twice. This fixes PowerPC/FDT systems with multiple PICs,
which would try to treat the previously-mapped interrupts from
fdt_decode_intr() as interrupt line numbers on the same parent PIC.

Remove some of the code required for supporting ssm(4) on SPARC in favor
of a more PowerPC/FDT-focused design. Whenever SPARC64 is integrated
into this rework, this should be (trivially) revisited.

MFC r256814, r256816, r256818, r256846, r256855, r256864 (by nwhitehorn):

- Handle 2GB of ram
- Allow the OFW interrupt mapping code to work with PCI devices not
enumerated by Open Firmware, as in the case of FDT.
- Provide an interface for PCI bus drivers that need some of ofw_pci's
metadata during attach.
- Use standard ofw_bus helpers instead of reinventing the wheel.
- Make hard-wired TLB allocations be at minimum one page.

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Make ofw_bus_get_node() consistently return -1 when there is no associated
OF node, instead of a random mixture of 0 and -1. Update all checks for 0
to check for -1 instead.

MFC after: 4 weeks

Inherit from PCI bridge driver instead of manually specifying all of its
methods.

Obtained from: sparc64
MFC after: 1 week

- There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
(bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
since r52045) but even recently added device drivers do this unnecessarily.
Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
Discussed with: jhb
- Also while at it, use __FBSDID.

Rename INTR_VEC to MAP_IRQ. From the OFW or FDT we obtain a
PIC handle with interrupt pin. This we map to the resource
called SYS_RES_IRQ.

Add MSI support for PCI devices attached to the CPC925 and CPC945 bridges
found in Apple and IBM G5 systems.

Provide for multiple, cascaded PICs on PowerPC systems, and extend the
OFW interrupt map interface to also return the device's interrupt parent.

MFC after: 8.1-RELEASE

Adapt parts of the sparc64 Open Firmware bus enumeration code (in particular,
the code for parsing interrupt maps) to PowerPC and reflect their new MI
status by moving them to the shared dev/ofw directory.

This commit also modifies the OFW PCI enumeration procedure on PowerPC to
allow the bus to find non-firmware-enumerated devices that Apple likes to add,
and adds some useful Open Firmware properties (compat and name) to the pnpinfo
string of children on OFW SBus, EBus, PCI, and MacIO links. Because of the
change to PCI enumeration on PowerPC, X has started working again on PPC
machines with Grackle hostbridges.

Reviewed by: marius
Obtained from: sparc64

Convert PowerPC AIM PCI and nexus busses to standard OFW bus interface. This
simplifies certain device attachments (Kauai ATA, for instance), and makes
possible others on new hardware.

On G5 systems, there are several otherwise standard PCI devices
(Serverworks SATA) that will not allow their interrupt properties to be
written, so this information must be supplied directly from Open Firmware.

Obtained from: sparc64

- Make pcib_devclass private to sys/dev/pci/pci_pci.c and change all the
various pcib drivers to use their own private devclass_t variables for
their modules.
- Use the DEFINE_CLASS_0() macro to declare drivers for the various pcib
drivers while I'm here.

Instead of "OpenFirmware", "openfirmware", etc. use the official spelling
"Open Firmware" from IEEE 1275 and OpenFirmware.org (no pun intended).

Ok'ed by: tmm

Catchup to now-required <sys/module.h> for PowerPC

Prefer new location of pci include files (which have only been in the
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.

Add a pcib variant to allow us to fix up interrupt assignments.

We probably want to do something wrt bus enumeration as well at some point.