#
285830 |
|
23-Jul-2015 |
gjb |
- Copy stable/10@285827 to releng/10.2 in preparation for 10.2-RC1 builds. - Update newvers.sh to reflect RC1. - Update __FreeBSD_version to reflect 10.2. - Update default pkg(8) configuration to use the quarterly branch.[1]
Discussed with: re, portmgr [1] Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
256281 |
|
10-Oct-2013 |
gjb |
Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
249083 |
|
04-Apr-2013 |
mav |
Remove all legacy ATA code parts, not used since options ATA_CAM enabled in most kernels before FreeBSD 9.0. Remove such modules and respective kernel options: atadisk, ataraid, atapicd, atapifd, atapist, atapicam. Remove the atacontrol utility and some man pages. Remove useless now options ATA_CAM.
No objections: current@, stable@ MFC after: never
|
#
232896 |
|
12-Mar-2012 |
jmallett |
o) Use ABI, not ISA_* options, to determine whether to compile bits if libkern required for the ABI the kernel is being built for. XXX This is implemented in a kind-of nasty way that involves including source files, but it's still an improvement. o) Retire ISA_* options since they're unused and were always wrong.
|
#
220982 |
|
24-Apr-2011 |
mav |
Switch the GENERIC kernels for all architectures to the new CAM-based ATA stack. It means that all legacy ATA drivers are disabled and replaced by respective CAM drivers. If you are using ATA device names in /etc/fstab or other places, make sure to update them respectively (adX -> adaY, acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential numbers for each type in order of detection, unless configured otherwise with tunables, see cam(4)).
ataraid(4) functionality is now supported by the RAID GEOM class. To use it you can load geom_raid kernel module and use graid(8) tool for management. Instead of /dev/arX device names, use /dev/raid/rX.
|
#
202175 |
|
12-Jan-2010 |
imp |
Set the svn:eol-style = native and svn:mime-type = text/plain properties on all files in this tree.
Submitted by: rpaulo@
|
#
202035 |
|
10-Jan-2010 |
imp |
Merge from projects/mips to head by hand:
r201881 | imp | 2010-01-08 20:08:22 -0700 (Fri, 08 Jan 2010) | 3 lines Rename mips_pcpu_init to mips_pcpu0_init since it applies only to the BSP. Provide a missing prototype.
r198669 | rrs | 2009-10-30 02:53:11 -0600 (Fri, 30 Oct 2009) | 5 lines With this commit our friend RMI will now compile. I have not tested it and the chances of it running yet are about ZERO.. but it will now compile. The hard part now begins, making it run ;-)
r198154 | rrs | 2009-10-15 15:03:32 -0600 (Thu, 15 Oct 2009) | 10 lines Does 4 things: 1) Adds future RMI directories 2) Places intr_machdep.c in specfic files.arch pointing to the generic intr_machdep.c. This allows us to have an architecture dependant intr_machdep.c (which we will need for RMI) in the machine specific directory 3) removes intr_machdep.c from files.mips 4) Adds some TARGET_XLR_XLS ifdef's for the machine specific intra_machdep.h. We may need to look at finding a better place to put this. But first I want to get this thing compiling.
r196836 | gonzo | 2009-09-04 13:02:11 -0600 (Fri, 04 Sep 2009) | 2 lines - Clean out some XXXMIPS comments that's not relevant now
r196236 | imp | 2009-08-14 19:03:13 -0600 (Fri, 14 Aug 2009) | 3 lines Fix style error replicated multiple times. Move to mips_bus_space_generic for octeon obio impl.
r195496 | imp | 2009-07-09 09:04:52 -0600 (Thu, 09 Jul 2009) | 2 lines Don't force ISA_MIPS32.
r195495 | imp | 2009-07-09 09:04:24 -0600 (Thu, 09 Jul 2009) | 4 lines Make the yamon function pointer stuff 64-bit safe. Make the base unsigned long, and sign extend the address of the function we're calling through.
r195494 | imp | 2009-07-09 08:54:09 -0600 (Thu, 09 Jul 2009) | 3 lines Addresses should be unsigned long. Make the address constants unsigned long.
r194929 | gonzo | 2009-06-24 16:42:52 -0600 (Wed, 24 Jun 2009) | 6 lines - Do not use hardcoded uart speed - Call mips_timer_early_init before initializing uart in order to make DELAY usable for ns8250 driver Submitted by: Neelkanth Natu
r194212 | gonzo | 2009-06-14 14:54:46 -0600 (Sun, 14 Jun 2009) | 2 lines - Fix prototypes to make compiler happy
r192864 | gonzo | 2009-05-26 16:40:12 -0600 (Tue, 26 May 2009) | 4 lines - Replace CPU_NOFPU and SOFTFLOAT options with CPU_FPU. By default we assume that there is no FPU, because majority of SoC does not have it.
r192788 | gonzo | 2009-05-25 22:51:56 -0600 (Mon, 25 May 2009) | 3 lines - Provide proper pre_thread/post_ithread functions for GT PCI controller.
r191282 | gonzo | 2009-04-19 16:02:14 -0600 (Sun, 19 Apr 2009) | 3 lines - Make mips_bus_space_generic be of type bus_space_tag_t instead of struct bus_space and update all relevant places.
r191084 | gonzo | 2009-04-14 20:28:26 -0600 (Tue, 14 Apr 2009) | 6 lines Use FreeBSD/arm approach for handling bus space access: space tag is a pointer to bus_space structure that defines access methods and hence every bus can define own accessors. Default space is mips_bus_space_generic. It's a simple interface to physical memory, values are read with regard to host system byte order.
|
#
182736 |
|
03-Sep-2008 |
obrien |
Catch up with the move from mips32/.
|
#
180332 |
|
06-Jul-2008 |
imp |
As discussed on IRC and at BSDcan, move the mips32/* directories up a level. The distinction was artificial. Some more movement around the deck charis is likely depending on the fallout from this one.
Paths were corrected after the svn mv. Hope that's OK.
|
#
178173 |
|
13-Apr-2008 |
imp |
FreeBSD/mips port. The FreeBSD/mips port targets mips32, mips64, mips32r2 and mips64r2 (and close relatives) processors. There presently is support for ADMtek ADM5120, A mips 4Kc in a malta board, the RB533 routerboard (based on IDT RC32434) and some preliminary support for sibtye/broadcom designs. Other hardware support will be forthcomcing.
This port boots multiuser under gxemul emulating the malta board and also bootstraps on the hardware whose support is forthcoming...
Oleksandr Tymoshenko, Wojciech Koszek, Warner Losh, Olivier Houchard, Randall Stewert and others that have contributed to the mips2 and/or mips2-jnpr perforce branches. Juniper contirbuted a generic mips port late in the life cycle of the misp2 branch. Warner Losh merged the mips2 and Juniper code bases, and others list above have worked for the past several months to get to multiuser.
In addition, the mips2 work owe a debt to the trail blazing efforts of the original mips branch in perforce done by Juli Mallett.
|