- Copy stable/10@285827 to releng/10.2 in preparation for 10.2-RC1
builds.
- Update newvers.sh to reflect RC1.
- Update __FreeBSD_version to reflect 10.2.
- Update default pkg(8) configuration to use the quarterly branch.[1]

Discussed with: re, portmgr [1]
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC r282577:
Add support for DYMO LabelWriter PnP.

MFC r278105:
Separate out detection of prevent and allow medium removal quirk.

PR: 185747

MFC r277044:
Increase the maximum number of dynamic USB quirks. USB memory stick
devices which don't support the synchronize cache SCSI command are
likely to also not support the prevent-allow medium removal SCSI
command.

PR: 185747

MFC r269575, r269576 and r269578:
- Add a second Huawei SCSI eject command as USB mode switch config files
sometimes use one or the other. Maybe newer Huawei modems switched.
- Return USB_ERR_INVAL if the eject method is not known.

PR: 145319

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Fix some statical clang analyzer warnings.

- Move scratch data from the USB bus structure to the USB device structure
so that simultaneous access cannot happen. Protect scratch area using
the enumeration lock. Also reduce stack usage in usbd_transfer_setup()
by moving some big stack members to the scratch area. This saves around
200 bytes of stack.
- Fix a whitespace.

MFC after: 1 week

Fix some nits.

Modify the FreeBSD USB kernel code so that it can be compiled directly
into the FreeBSD boot loader, typically for non-USB aware BIOSes, EFI systems
or embedded platforms. This is also useful for out of the system compilation
of the FreeBSD USB stack for various purposes. The USB kernel files can
now optionally include a global header file which should include all needed
definitions required to compile the FreeBSD USB stack. When the global USB
header file is included, no other USB header files will be included by
default.

Add new file containing the USB stack configuration for the
FreeBSD loader build.

Replace some __FBSDID()'s by /* $FreeBSD$ */ comments. Now all
USB files follow the same style.

Use cases:
- console in loader via USB
- loading kernel via USB

Discussed with: Hiroki Sato, hrs @ EuroBSDCon

Fix more regression issue after r244503.

usbd_transfer_setup() does not set a default length for USB transfers.
Only the number of frames is automatically setup.

MFC after: 1 week

Fix regression issue after r244503.

MFC after: 1 week

Make sure all USB drivers allocate buffer memory
through the USB API and/or busdma.

The following assumptions have been made:
umass - buffers passed from CAM/SCSI layer are OK
network - mbufs are OK.

Some other nits while at it.

MFC after: 1 week
Suggested by: imp

If a USB mass storage device doesn't respond properly
to the initial SCSI INQUIRY command, enable all quirks.
This fixes detection of some Transcend TS2GUFM devices.

MFC after: 1 week
Reported by: Michael Dexter

Improve auto-quirks detection for certain Kingston memory sticks.

MFC after: 2 weeks

Fix compiler warnings, mostly signed issues,
when USB modules are compiled with WARNS=9.

MFC after: 1 weeks

Fix a compile warning with clang.

Reported by: arundel @
MFC after: 3 days

Style change.
- Make it easier to port the USB code to other platforms by only using
one set of memory functions for clearing and copying memory. None of
the memory copies are overlapping. This means using bcopy() is not
required.
- Fix a compile warning when USB_HAVE_BUSDMA=0
- Add missing semicolon in avr32dci.
- Update some comments.

MFC after: 1 week

Improve USB mass storage quirk auto detection.

MFC after: 3 days

Reduce USB memory usage during enumeration.

We are allocating some kilobytes of extra memory during USB device enumeration.
This does not change alot under FreeBSD, but makes sense for various embedded
operating systems using the FreeBSD USB stack, which have less memory
resources available.

Approved by: re (kib)
MFC after: 1 week

Some USB mass storage devices requires that the sense information
is retrieved after a failed SCSI command to continue normal
operation. Else this sense information is retrived at the next
SCSI command.

Approved by: re (kib)
Reported by: Alex Kozlov
MFC after: 1 week
PR: usb/160299

This patch adds automatic detection of USB mass storage devices
which does not support the no synchronize cache SCSI command.

The __FreeBSD_version version macro has been bumped and
external kernel modules needs to be recompiled after
this patch.

Approved by: re (kib)
MFC after: 1 week
PR: usb/160299

Remove duplicate header includes

- Move execution of event handlers into the probe and attach function so that
dynamically loaded device drivers get a chance to run their event hooks.

- Decouple the USB suspend and resume lock from witness. It produces some
false warnings due to reusing the lock name among multiple devices.

MFC after: 3 days

Remove unneeded includes of <sys/linker_set.h>. Other headers that use
it internally contain nested includes.

Reviewed by: bde

We already have dummy receive buffer in sc->buffer.

Suggested by: hselasky

Remove extra assignment.

Add support to Alcatel/TCTMobile X080S USB 3G modem. The device needs
special eject command to reappear as modem. It also requires DIR_IN flag
in the command message, so we supply some dummy data along with the command.

Feedback from X080S owners appreciated. I have not a pure Alcatel/TCTMobile
device, but another one under "Svyaznoy" (Связной) brand, and I didn't yet
managed to get it working. It is successfully recognized, it responds to
AT commands, but it shuts up right after successfull CONNECT response.

Reviewed by: hps

Add support for the E1752 3G modem and the required eject command.

Submitted by: Milan Obuch

Fix debug printf on 64bit arches.

Spotted by: b. f.

Improve u3g device ejecting by providing additional methods for the eject
command in the usb_msctest routines, as well as a general tidyup.

This now properly ejects the ZTE MF636, Option Gi0322 and Novatel MC950D
devices I have on my desk.

Remove overuse of exclamation marks in kernel printfs, there mere fact a
message has been printed is enough to get someones attention. Also remove the
line number for DPRINTF/DPRINTFN, it already prints the funtion name and a
unique message.

Purge mergeinfo from files that were temporarily renamed while USB2 was
imported into the tree alongside USB.

Approved by: re (mergeinfo blanket)

- Make struct usb_xfer opaque so that drivers can not access the internals
- Reduce the number of headers needed for a usb driver, the common case is just usb.h and usbdi.h

s/usb2_/usb_|usbd_/ on all function names for the USB stack.

Remove usb2_cv_* and just use the kernel condvar implementation, it was needed
earlier since condition variables didnt work with Giant but this was fixed 10
months ago.

Revert the size_t part of the last commit for the moment, this blows up the
USB_ADD_BYTES macro.

s/usb2_/usb_/ on all typedefs for the USB stack.

s/usb2_/usb_/ on all C structs for the USB stack.

Remove pointeless mergeinfo that crept in from r190633.

MFp4 //depot/projects/usb@159909

- make usb2_power_mask_t 16-bit
- remove "usb2_config_sub" structure from "usb2_config". To compensate for this
"usb2_config" has a new field called "usb_mode" which select for which mode
the current xfer entry is active. Options are: a) Device mode only b) Host
mode only (default-by-zero) c) Both modes. This change was scripted using
the following sed script: "s/\.mh\././g".
- the standard packet size table in "usb_transfer.c" is now a function, hence
the code for the function uses less memory than the table itself.

Submitted by: Hans Petter Selasky

Implement an ipfw action to reassemble ip packets: reass.

Integrate user/mav/ata branch:

Add ch_suspend/ch_resume methods for PCI controllers and implement them
for AHCI. Refactor AHCI channel initialization according to it.

Fix Port Multipliers operation. It is far from perfect yet, but works now.
Tested with JMicron JMB363 AHCI + SiI 3726 PMP pair.
Previous version was also tested with SiI 4726 PMP.

Hardware sponsored by: Vitsch Electronics / VEHosting.nl

MFp4 //depot/projects/usb@159517

Fix warnings with the IAR compiler.

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb @159431,159437,159438

- start using the new USB typedefs in the USB core
- Remove usage of USB_ADD_BYTES()

Submitted by: Hans Petter Selasky

MFp4 //depot/projects/usb @159430

- Move tunable defines into usb_core.h and dependancy towards usb_defs.h
- Leave hardcoded defines in "usb_defs.h".
- Allow overriding all tunable defines.
- Add more customisable typedefs.
- Correct maximum device number.

Submitted by: Hans Petter Selasky

Move the new USB stack into its new home.

MFp4 //depot/projects/usb; 157069, 157429, 157430

- Change "usb2_pause_mtx" so that it takes the timeout value in ticks
- Factor out USB ethernet and USB serial driver specific control request.
- USB process naming cleanup.

Submitted by: Hans Petter Selasky

Sync with usb4bsd:

src/lib/libusb20/libusb20_desc.c

Make "libusb20_desc_foreach()" more readable.

src/sys/dev/usb2/controller/*.[ch]
src/sys/dev/usb2/core/*.[ch]

Implement support for USB power save for all HC's.

Implement support for Big-endian EHCI.

Move Huawei quirks back into "u3g" driver.

Improve device enumeration.

src/sys/dev/usb2/ethernet/*[ch]

Patches for supporting new AXE Gigabit chipset.

src/sys/dev/usb2/serial/*[ch]

Fix IOCTL return code.

src/sys/dev/usb2/wlan/*[ch]

Sync with old USB stack.

Submitted by: hps

Remove superfluous return statements from the end of void functions.

src/lib/libusb20/libusb20_compat01.c

Fix some issues about re-scanning of the devices.

src/lib/libusb20/libusb20_ugen20.c

Fix issue about libusb20 having to release the
USB transfers before doing a SET_CONFIG, else
the kernel will kill the file handle.

src/sys/dev/usb2/core/usb2_device.
src/sys/dev/usb2/core/usb2_generic.c
src/sys/dev/usb2/core/usb2_generic.h

Add support for U3G devices.
Improve and cleanup FIFO free handling.
Improve device re-enumeration.

src/sys/dev/usb2/core/usb2_msctest.c
src/sys/dev/usb2/core/usb2_msctest.h

Fix some problems in the USB Mass Storage Test.
Add Huawei vendor specific quirks.

src/sys/dev/usb2/core/usb2_request.c

Improve device re-enumeration.

src/sys/dev/usb2/ethernet/if_aue2.c
src/sys/dev/usb2/include/usb2_devid.h
src/sys/dev/usb2/include/usb2_devtable.h
src/sys/dev/usb2/quirk/usb2_quirk.c

Integrate changes from the old USB driver.

src/sys/dev/usb2/include/usb2_standard.h

Add definition of USB3.0 structures from USB.org.

src/sys/dev/usb2/serial/u3g2.c
src/sys/dev/usb2/serial/ugensa2.c
src/sys/modules/usb2/Makefile
src/sys/modules/usb2/serial_3g/Makefile

Import U3G driver.

Submitted by: Hans Petter Selasky (usb4bsd)

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.

This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:

1) A brief feature list:

- A new and mutex enabled USB API.

- Many USB drivers are now running Giant free.

- Linux USB kernel compatibility layer.

- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.

- New "usbconfig" utility, for easy configuration of USB.

- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.

- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.

- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.

- Safer parsing of USB descriptors.

- Autodetect of annoying USB install disks.

- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.

- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.

- ... see the FreeBSD quarterly status reports under "USB project"

2) To enable the driver in the default kernel build:

2.a) Remove all existing USB device options from your kernel config
file.

2.b) Add the following USB device options to your kernel configuration
file:

# USB core support
device usb2_core

# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci

# USB mass storage support
device usb2_storage
device usb2_storage_mass

# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav

# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd

# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom

# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng

# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms

# USB sound and MIDI device support
device usb2_sound

2) To enable the driver at runtime:

2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.

2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.

Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred