- Copy stable/10@285827 to releng/10.2 in preparation for 10.2-RC1
builds.
- Update newvers.sh to reflect RC1.
- Update __FreeBSD_version to reflect 10.2.
- Update default pkg(8) configuration to use the quarterly branch.[1]

Discussed with: re, portmgr [1]
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC r278964:

The __FreeBSD_version was changed to 1001510 to be appropriate for
stable/10.

I will followup with a commit to mpr(4) and mps(4) in head to reflect
the stable/10 __FreeBSD_version and merge the change back to stable/10.

------------------------------------------------------------------------
r278964 | ken | 2015-02-18 11:30:19 -0700 (Wed, 18 Feb 2015) | 46 lines

Make sure that the flags for the XPT_DEV_ADVINFO CCB are initialized
properly.

If there is garbage in the flags field, it can sometimes include a
set CDAI_FLAG_STORE flag, which may cause either an error or
perhaps result in overwriting the field that was intended to be
read.

sys/cam/cam_ccb.h:
Add a new flag to the XPT_DEV_ADVINFO CCB, CDAI_FLAG_NONE,
that callers can use to set the flags field when no store
is desired.

sys/cam/scsi/scsi_enc_ses.c:
In ses_setphyspath_callback(), explicitly set the
XPT_DEV_ADVINFO flags to CDAI_FLAG_NONE when fetching the
physical path information. Instead of ORing in the
CDAI_FLAG_STORE flag when storing the physical path, set
the flags field to CDAI_FLAG_STORE.

sys/cam/scsi/scsi_sa.c:
Set the XPT_DEV_ADVINFO flags field to CDAI_FLAG_NONE when
fetching extended inquiry information.

sys/cam/scsi/scsi_da.c:
When storing extended READ CAPACITY information, set the
XPT_DEV_ADVINFO flags field to CDAI_FLAG_STORE instead of
ORing it into a field that isn't initialized.

sys/dev/mpr/mpr_sas.c,
sys/dev/mps/mps_sas.c:
When fetching extended READ CAPACITY information, set the
XPT_DEV_ADVINFO flags field to CDAI_FLAG_NONE instead of
setting it to 0.

sbin/camcontrol/camcontrol.c:
When fetching a device ID, set the XPT_DEV_ADVINFO flags
field to CDAI_FLAG_NONE instead of 0.

sys/sys/param.h:
Bump __FreeBSD_version to 1100061 for the new XPT_DEV_ADVINFO
CCB flag, CDAI_FLAG_NONE.

Sponsored by: Spectra Logic

MFC Alexander Motin's direct dispatch, multi-queue, and finer-grained
locking support for CAM

r256826:
Fix several target mode SIMs to not blindly clear ccb_h.flags field of
ATIO CCBs. Not all CCB flags there belong to them.

r256836:
Remove hard limit on number of BIOs handled with one ATA TRIM request.

r256843:
Merge CAM locking changes from the projects/camlock branch to radically
reduce lock congestion and improve SMP scalability of the SCSI/ATA stack,
preparing the ground for the coming next GEOM direct dispatch support.

r256888:
Unconditionally acquire periph reference on CCB allocation failure.

r256895:
Fix memory and references leak due to unfreed path.

r256960:
Move CAM_UNQUEUED_INDEX setting to the last moment and under the periph lock.
This fixes race condition with cam_periph_ccbwait(), causing use-after-free.

r256975:
Minor (mostly cosmetical) addition to r256960.

r257054:
Some microoptimizations for da and ada drivers:
- Replace ordered_tag_count counter with single flag;
- From da remove outstanding_cmds counter, duplicating pending_ccbs list;
- From da_softc remove unused links field.

r257482:
Fix lock recursion, triggered by `smartctl -a /dev/adaX`.

r257501:
Make getenv_*() functions and respectively TUNABLE_*_FETCH() macros not
allocate memory and so not require sleepable environment. getenv() has
already used on-stack temporary storage, so just use it more rationally.
getenv_string() receives buffer as argument, so don't need another one.

r257914:
Some CAM locks polishing:
- Fix LOR and possible lock recursion when handling high-power commands.
Introduce new lock to protect left power quota and list of frozen devices.
- Correct locking around xpt periph creation.
- Remove seems never used XPT_FLAG_OPEN xpt periph flag.

Again, Netflix assisted with testing the merge, but all of the credit goes
to Alexander and iX Systems.

Submitted by: mav
Sponsored by: iX Systems

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Make SES driver adequately react on simple enclosure devices -- read Short
Enclosure status to enclosure status field, clear previous state and exit.

Fix kernel panic if cache->nelms is zero.

MFC after: 2 weeks

Make CAM return and GEOM DISK pass through new GEOM::lunid attribute.

SPC-4 specification states that serial number may be property of device,
but not a specific logical unit. People reported about FC storages using
serial number in that way, making it unusable for purposes of LUN multipath
detection. SPC-4 states that designators associated with logical unit from
the VPD page 83h "Device Identification" should be used for that purpose.
Report first of them in the new attribute in such preference order: NAA,
EUI-64, T10 and SCSI name string.

While there, make GEOM DISK properly report GEOM::ident in XML output also
using d_getattr() method, if available. This fixes serial numbers reporting
for SCSI disks in `geom disk list` output and confxml.

Discussed with: gibbs, ken
Sponsored by: iXsystems, Inc.
MFC after: 2 weeks

Sanitize the element descriptor string before using it as a device name.

Reported and tested by: Vitalij Satanivskij
Reviewed by: gibbs, mav

Make SES driver to not fall out on some errors in Additional Status page.
This allows CAM devices still get their physical paths even if status of
later elements it corrupted.

Sponsored by: iXsystems, Inc.

Fix bug in r242720, that caused additional status page to not be used if
descriptor page is supported.

Use information about suported diagnostic pages to avoid reading optional
Element Descriptor page if it is not supported. This removes one error
message from verbose logs during boot on systems with some enclosures.

Sponsored by: iXsystems, Inc.

remove duplicate semicolons where possible.

Approved by: cperciva
MFC after: 1 week

XPT_DEV_MATCH is probably the only xpt_action() method that is called
without holding SIM lock. It really doesn't need that lock, but adding it
removes that specific exception, allowing to assert locking there later.

Submitted by: ken@ (earlier version)

Get SIM lock in several places while calling CAM functions.
This fixes several use-after-free panics on systems with SAS enclosures.

Submitted by: ken@, mav@

1. Remove SEN support. I doubt there are any working examples
of this hardware still running (close to twenty years now).

2. Quiesece and use ENC_VLOG instead of ENC_LOG for most
complaints. That is, they're visible with bootverbose, but
otherwise quiesced and not repeatedly spamming messages
with constant reminders that hardware in this space is
rarely fully compliant.

MFC after: 1 month

Remove opt_enc.h from files committed with r235911. enc(4) is the
'encapsulating interface' used with IPsec and has nothing to do with
storage 'enclosure' services.

MFC after: 3 days
Noticed while: debugging why enc(4) is no longer automatically created

Do not call ses_softc_cleanup() in case of configuration read failure.
Just free inclomplete daemon cache instead to let it retry next time.
Premature ses_softc_cleanup() caused NULL dereference when freed softc
was accessed later.

MFprojects/zfsd:
Revamp the CAM enclosure services driver.
This updated driver uses an in-kernel daemon to track state changes and
publishes physical path location information\for disk elements into the
CAM device database.

Sponsored by: Spectra Logic Corporation
Sponsored by: iXsystems, Inc.
Submitted by: gibbs, will, mav