- Copy stable/10@285827 to releng/10.2 in preparation for 10.2-RC1
builds.
- Update newvers.sh to reflect RC1.
- Update __FreeBSD_version to reflect 10.2.
- Update default pkg(8) configuration to use the quarterly branch.[1]

Discussed with: re, portmgr [1]
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924,
262925, 262929, 262932, 262935, 262940, 262941, 262942, 262948, 262949,
262950

Strip arm/conf/DEFAULTS down to just items that are mandatory for running
the architecture.

Move all the files named foo/common.c to foo/foo_common.c

Initial cut for DTS on the hl201 board.

Add commented out dts for sam9260ek as well as early printf support.

Make clock optional on uart nodes, then back it out ("I don't know what I
was thinking, but it is lame.")

Set the baud rate if it isn't 0

Make at91_soc_id() public.

Properly round at91 resource on unmapping.

Move AT91 AIC related stuff to own file.

Fix another bug in multicast filtering. i.MX uses 6 bits from MSB in
LE CRC32 for the hash value, not the lowest 6 bits in BE CRC32.

Follow r262916 with one more config file that references a renamed common.c

Remove bogus AT91 define that causes compile errors. Most of the defines
for SAM9X are going away soonish anyway (once FDT works), but until
then...

Remove all dregs of a per-thread undefined-exception-mode stack.

Rework the VFP code that handles demand-based save and restore of state.

Always call vfp_discard() on thread death.

When a thread begins life it doesn't own the VFP hardware state on any cpu.

Make undefined exception entry MP-safe.

MFC 262695, 262708, 262709, 262710, 262711, 262728, 262870, 262877, 262880,
262885, 262891, 262903,

imx6: Add a tunable to set the number of active cores, enable SMP by default.

ffec: Fix multicast filtering.

Allwinner a10/a20...
- Add gpio and clock bits for A10/A20's EMAC ethernet controller driver
- EMAC gpio configuration
- EMAC clock activation
- Add Static Random Access Memory controller driver for A10/A20.
A10/A20's SRAM is used by devices, such as CPU, EMAC,
for extra fast memory or as cache.
- Add EMAC 10/100 Ethernet controller driver for A10/A20.
It is available mostly in A10 devices like Hackberry, Marsboard,
Mele A1000, A2000, A100 HTPC, cubieboard1 and A20 device
like cubieboard2.
TX performance can be improved using both channels 0 and 1.
RX performance is poor and needs improvement with the assistance of
external DMA controller in case there
- Add EMAC and SRAM controller entries to FDT.
- Add EMAC device to kernel config files and enable EMAC, SRAM drivers.

OMAP: When calculating the MPU freq, make sure not to overflow.

Vybrid:
- Add driver for Port control and interrupts (PORT).
- Export panel info to DTS
- Reset all the layers before setup first one
- Enable display

nandfs: Slight code reordering to make error branch last.

Add option TMPFS to arm/conf/DEFAULTS, remove it from the few configs
that have it individually. Concensus on freebsd-arm@ is that it should
be included in all ARM kernels.

Fix the arm sys_sigreturn(): its argument is a struct ucontext, not a
struct sigframe containing the struct ucontext.

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Set machine correctly on ARM. This allows universe to use the correct world
when building each kernel.

Reviewed by: imp

Disable the option VFS_ALLOW_NONMPSAFE by default on all the supported
platforms.
This will make every attempt to mount a non-mpsafe filesystem to the
kernel forbidden, unless it is expressely compiled with
VFS_ALLOW_NONMPSAFE option.

This patch is part of the effort of killing non-MPSAFE filesystems
from the tree.

No MFC is expected for this patch.

Introduce the option VFS_ALLOW_NONMPSAFE and turn it on by default on
all the architectures.
The option allows to mount non-MPSAFE filesystem. Without it, the
kernel will refuse to mount a non-MPSAFE filesytem.

This patch is part of the effort of killing non-MPSAFE filesystems
from the tree.

No MFC is expected for this patch.

Tested by: gianni
Reviewed by: kib

Revert 200594. This file isn't intended for these sorts of things.

Add INCLUDE_CONFIG_FILE, and a note in comments about how to also
include the comments with CONFIGARGS

Make gpart the default partitioning class on all platforms.
Both ia64 and powerpc were using gpart exclusively already
so there's no change for those two.

Discussed on: arch@

Add arm/conf/DEFAULTS and populate it with:
machine arm
device mem
options GEOM_BSD
options GEOM_MBR

Remove the first two from all kernel configuration files and
change geom_bsd and geom_mbr from standard to optional.