#
285830 |
|
23-Jul-2015 |
gjb |
- Copy stable/10@285827 to releng/10.2 in preparation for 10.2-RC1 builds. - Update newvers.sh to reflect RC1. - Update __FreeBSD_version to reflect 10.2. - Update default pkg(8) configuration to use the quarterly branch.[1]
Discussed with: re, portmgr [1] Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
256281 |
|
10-Oct-2013 |
gjb |
Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
243974 |
|
07-Dec-2012 |
adrian |
Add a new 900MHz GSM regulatory SKU for the Xagyl Communications XC900M.
The XC900M acts as a Ubiquiti XR9 (and I _think_ SR9) by default; it uses the same 900MHz<->2.4GHz downconverter mapping.
However it has an alternative frequency mapping which squeezes in a couple more half/quarter rate channels. Since the default HAL doesn't support fractional tuning (sub-1MHz) in 2.4GHz mode on the AR5413/AR5414, they implement it using a jumper.
Datasheet: http://www.xagyl.com/download/XC900M_Datasheet.pdf
Thankyou to Xagyl Communications for the XC900M NICs and Edgar Martinez for organising the donation.
Tested:
* XC900M <-> XC900M * Ubiquiti XR9 <-> XC900M
TODO:
* Test against SR9 and GZ901 if possible (the IEEE channel<->frequency mapping may not match up, thanks to the slightly different channels involved)
|
#
223998 |
|
14-Jul-2011 |
adrian |
More Japan regulatory domain fixes:
* Add HT40 entries for the two new Japan bands * Fix a channel separation bug in one of the new bands I introduced in a previous commit.
|
#
223996 |
|
14-Jul-2011 |
adrian |
Japan regulatory domain update #1 - sync with CRDA entries.
Specifics:
* add 4920MHz-4980MHz for 11a and 11n/HT20 * add 5040MHz-5080MHz for 11a and 11n/HT20 * add 5500MHz-5700MHz for 11a and 11n/HT20 (DFS needed) * add 5500MHz-5680MHz for 11n/HT40 (DFS needed)
TODO:
* add correct HT40 bands for 4920-4980 and 5040-5080
For the curious:
There's been many revisions to the Japan regulatory rules. Apparently, the requirements require old cards certified on a previous version of the rules to obey the older rules, not the newer rules.
The regdomain.xml outlines the -current- restrictions.
The card driver (eg the ath_hal regulatory domain code) may include previous revisions of the Japan rules.
The ath_hal regdomain code populates the initial channel list based on what the EEPROM indicates is possible. The regdomain.xml database imposes further restrictions on this.
So regdomain.xml only needs to have the -current- rules. If the card was certified on an earlier set of JP rules, it may only support a subset of those channels - these are calculated at device attach and this restricted list is kicked to net80211. regdomain.xml operates on -this- list of channels.
And thus, the correct regulatory behaviour for Japan is handled with only one regdomain.xml Japan database entry.
(phew.)
Obtained from: Linux wireless-regdb
|
#
223564 |
|
26-Jun-2011 |
adrian |
I think 23dBm is the correct value to use here. CRDA uses 20dBm + 3dB max antenna gain; I believe net80211 doesn't take antenna gain into account and leaves it up to the driver to enforce. (ath_hal(4) certainly tries to do this.)
|
#
223563 |
|
26-Jun-2011 |
adrian |
Add a couple more frequency ranges to the FCC3 (FCC + DFS) regulatory domain.
The frequency range 5490MHz -> 5710MHz was opened up sometime in 2009, but regdomain.xml wasn't updated.
FCC reference: (Section 15.407): http://louise.hallikainen.org/FCC/FccRules/2009/15/407/
The hole between 5600-5650MHz is due to a request from Airports using a weather radar system which also utilises this range. The GIT commit explaining this hole in more detail can be found here:
http://git.kernel.org/?p=linux/kernel/git/linville/wireless-regdb.git;a=commit;h=fcbf9225d56e82d9a4e506187d42285e76d81523
|
#
223561 |
|
26-Jun-2011 |
adrian |
Replace tab with 8 spaces, bringing it in line with the rest of the file.
|
#
223504 |
|
24-Jun-2011 |
adrian |
Fix another broken HT40 channel band reference.
|
#
223498 |
|
24-Jun-2011 |
adrian |
More incorrect HT/40 setups in FCC.
Noticed-by: bschmidt@
|
#
223497 |
|
24-Jun-2011 |
adrian |
Fix an incorrect frequency band for HT/40 in the FCC SKU.
Noticed by: bschmidt@
|
#
223496 |
|
24-Jun-2011 |
adrian |
Import one of the two missing US FCC DFS bands to FCC3.
The FCC opened up this band sometime in 2009 (and ath was updated); but regdomain.xml wasn't updated.
|
#
208060 |
|
14-May-2010 |
dougb |
Remove trailing white space. No functional changes.
|
#
187846 |
|
28-Jan-2009 |
sam |
Remove gsm hacks now that we can do this "right": o no need for special country codes; it's sufficient to use the sku o no need to specify bands w/ 2.4G frequencies, use the real values o remove duplicate band specs
|
#
187343 |
|
16-Jan-2009 |
sam |
add FCC4 SKU to expose Public Safety Band (PSB) frequencies; this is modeled after the Atheros SKU of the same name
|
#
186106 |
|
15-Dec-2008 |
sam |
o fix DEBUG sku definition o add definitions for 900MHz radios: Ubiquiti SR9 and XR9, and ZComax GZ-901
|
#
178355 |
|
20-Apr-2008 |
sam |
802.11 regulatory definitions used by ifconfig
Support by: Hobnob
|