#
272461 |
|
02-Oct-2014 |
gjb |
Copy stable/10@r272459 to releng/10.1 as part of the 10.1-RELEASE process.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
256281 |
|
10-Oct-2013 |
gjb |
Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
247047 |
|
20-Feb-2013 |
kib |
Convert machine/elf.h, machine/frame.h, machine/sigframe.h, machine/signal.h and machine/ucontext.h into common x86 includes, copying from amd64 and merging with i386.
Kernel-only compat definitions are kept in the i386/include/sigframe.h and i386/include/signal.h, to reduce amd64 kernel namespace pollution. The amd64 compat uses its own definitions so far.
The _MACHINE_ELF_WANT_32BIT definition is to allow the sys/boot/userboot/userboot/elf32_freebsd.c to use i386 ELF definitions on the amd64 compile host. The same hack could be usefully abused by other code too.
|
#
230426 |
|
21-Jan-2012 |
kib |
Add support for the extended FPU states on amd64, both for native 64bit and 32bit ABIs. As a side-effect, it enables AVX on capable CPUs.
In particular:
- Query the CPU support for XSAVE, list of the supported extensions and the required size of FPU save area. The hw.use_xsave tunable is provided for disabling XSAVE, and hw.xsave_mask may be used to select the enabled extensions.
- Remove the FPU save area from PCB and dynamically allocate the (run-time sized) user save area on the top of the kernel stack, right above the PCB. Reorganize the thread0 PCB initialization to postpone it after BSP is queried for save area size.
- The dumppcb, stoppcbs and susppcbs now do not carry the FPU state as well. FPU state is only useful for suspend, where it is saved in dynamically allocated suspfpusave area.
- Use XSAVE and XRSTOR to save/restore FPU state, if supported and enabled.
- Define new mcontext_t flag _MC_HASFPXSTATE, indicating that mcontext_t has a valid pointer to out-of-struct extended FPU state. Signal handlers are supplied with stack-allocated fpu state. The sigreturn(2) and setcontext(2) syscall honour the flag, allowing the signal handlers to inspect and manipilate extended state in the interrupted context.
- The getcontext(2) never returns extended state, since there is no place in the fixed-sized mcontext_t to place variable-sized save area. And, since mcontext_t is embedded into ucontext_t, makes it impossible to fix in a reasonable way. Instead of extending getcontext(2) syscall, provide a sysarch(2) facility to query extended FPU state.
- Add ptrace(2) support for getting and setting extended state; while there, implement missed PT_I386_{GET,SET}XMMREGS for 32bit binaries.
- Change fpu_kern KPI to not expose struct fpu_kern_ctx layout to consumers, making it opaque. Internally, struct fpu_kern_ctx now contains a space for the extended state. Convert in-kernel consumers of fpu_kern KPI both on i386 and amd64.
First version of the support for AVX was submitted by Tim Bird <tim.bird am sony com> on behalf of Sony. This version was written from scratch.
Tested by: pho (previous version), Yamagi Burmeister <lists yamagi org> MFC after: 1 month
|
#
190620 |
|
01-Apr-2009 |
kib |
Save and restore segment registers on amd64 when entering and leaving the kernel on amd64. Fill and read segment registers for mcontext and signals. Handle traps caused by restoration of the invalidated selectors.
Implement user-mode creation and manipulation of the process-specific LDT descriptors for amd64, see sysarch(2).
Implement support for TSS i/o port access permission bitmap for amd64.
Context-switch LDT and TSS. Do not save and restore segment registers on the context switch, that is handled by kernel enter/leave trampolines now. Remove segment restore code from the signal trampolines for freebsd/amd64, freebsd/ia32 and linux/i386 for the same reason.
Implement amd64-specific compat shims for sysarch.
Linuxolator (temporary ?) switched to use gsbase for thread_area pointer.
TODO: Currently, gdb is not adapted to show segment registers from struct reg. Also, no machine-depended ptrace command is added to set segment registers for debugged process.
In collaboration with: pho Discussed with: peter Reviewed by: jhb Linuxolator tested by: dchagin
|
#
153666 |
|
22-Dec-2005 |
jhb |
Tweak how the MD code calls the fooclock() methods some. Instead of passing a pointer to an opaque clockframe structure and requiring the MD code to supply CLKF_FOO() macros to extract needed values out of the opaque structure, just pass the needed values directly. In practice this means passing the pair (usermode, pc) to hardclock() and profclock() and passing the boolean (usermode) to hardclock_cpu() and hardclock_process(). Other details: - Axe clockframe and CLKF_FOO() macros on all architectures. Basically, all the archs were taking a trapframe and converting it into a clockframe one way or another. Now they can just extract the PC and usermode values directly out of the trapframe and pass it to fooclock(). - Renamed hardclock_process() to hardclock_cpu() as the latter is more accurate. - On Alpha, we now run profclock() at hz (profhz == hz) rather than at the slower stathz. - On Alpha, for the TurboLaser machines that don't have an 8254 timecounter, call hardclock() directly. This removes an extra conditional check from every clock interrupt on Alpha on the BSP. There is probably room for even further pruning here by changing Alpha to use the simplified timecounter we use on x86 with the lapic timer since we don't get interrupts from the 8254 on Alpha anyway. - On x86, clkintr() shouldn't ever be called now unless using_lapic_timer is false, so add a KASSERT() to that affect and remove a condition to slightly optimize the non-lapic case. - Change prototypeof arm_handler_execute() so that it's first arg is a trapframe pointer rather than a void pointer for clarity. - Use KCOUNT macro in profclock() to lookup the kernel profiling bucket.
Tested on: alpha, amd64, arm, i386, ia64, sparc64 Reviewed by: bde (mostly)
|
#
153241 |
|
08-Dec-2005 |
jhb |
MFi386: - Move PUSH_FRAME and POP_FRAME to asmacros.h and use PUSH_FRAME in atpic entry points. - Move PCPU_* asm macros out of the middle of the asm profiling macros. - Pass IRQ vector argument as an int rather than void * to reduce diffs with i386. - EOI the lapic in C for the lapic timer handler. - GC unused Xcpuast function. - Split IPI_STOP handling code of ipi_nmi_handler() out into a cpustop_handler() function and call it from Xcpustop rather than duplicating all the logic in assembly. - Fixup the list of symbols with interrupt frames in ddb traces. Xatpic_fastintr* have never existed on amd64, and the lapic timer handler and various IPI handlers were missing. - Use trapframe instead of intrframe for interrupt entry points (on amd64 the interrupt vector was already a separate argument, so the two frames were already identical) and GC intrframe.
Submitted by: peter (3)
|
#
131942 |
|
10-Jul-2004 |
marcel |
Remove obsolete prototype of kdb_trap().
|
#
127920 |
|
05-Apr-2004 |
imp |
Remove advertising clause from University of California Regent's license, per letter dated July 22, 1999 and email from Peter Wemm.
Approved by: core, peter
|
#
122296 |
|
08-Nov-2003 |
peter |
Update the graffiti.
|
#
121103 |
|
15-Oct-2003 |
peter |
Pull the tier-2 card one last time and break the get/setcontext and sigreturn() ABI and the signal context on the stack.
Make the trapframe (and its shadows in the ucontext and sigframe etc) 8 bytes larger in order to preserve 16 byte stack alignment for the following C code calls. I could have done some padding after the trapframe was saved, but some of the C code still expects an argument of 'struct trapframe'. Anyway, this gives me a spare field that can be used to store things like 'partial trapframe' status or something else in the future.
The runtime impact is fairly small, *except* for threaded apps and things that decode contexts and the signal stack (eg: cvsup binary). Signal delivery isn't too badly affected because the kernel generates the sigframe that sigreturn uses after the handler has been called.
The size of mcontext_t and struct sigframe hasn't changed. Only the last few fields (sc_eip etc) got moved a little and I eliminated a spare field. mc_len/sc_len did change location though so the sanity checks there will still trap it.
|
#
114952 |
|
12-May-2003 |
peter |
For the page fault handler, save %cr2 in the outer trap handler so that we do not have to run so long with interrupts disabled. This involved creating tf_addr in the trapframe. Reorganize the trap stubs so that they consistently reserve the stack space and initialize any missing bits.
Approved by: re (amd64 stuff)
|
#
114349 |
|
30-Apr-2003 |
peter |
Commit MD parts of a loosely functional AMD64 port. This is based on a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to attempt to get a stable base to start from. There is a lot missing still. Worth noting: - The kernel runs at 1GB in order to cheat with the pmap code. pmap uses a variation of the PAE code in order to avoid having to worry about 4 levels of page tables yet. - It boots in 64 bit "long mode" with a tiny trampoline embedded in the i386 loader. This simplifies locore.s greatly. - There are still quite a few fragments of i386-specific code that have not been translated yet, and some that I cheated and wrote dumb C versions of (bcopy etc). - It has both int 0x80 for syscalls (but using registers for argument passing, as is native on the amd64 ABI), and the 'syscall' instruction for syscalls. int 0x80 preserves all registers, 'syscall' does not. - I have tried to minimize looking at the NetBSD code, except in a couple of places (eg: to find which register they use to replace the trashed %rcx register in the syscall instruction). As a result, there is not a lot of similarity. I did look at NetBSD a few times while debugging to get some ideas about what I might have done wrong in my first attempt.
|
#
92761 |
|
20-Mar-2002 |
alfred |
Remove __P.
|
#
66714 |
|
05-Oct-2000 |
jhb |
Interrupt frames don't include the saved cpl anymore since cpl is dead.
|
#
51792 |
|
29-Sep-1999 |
marcel |
sigset_t change (part 3 of 5) -----------------------------
By introducing a new sigframe so that the signal handler operates on the new siginfo_t and on ucontext_t instead of sigcontext, we now need two version of sendsig and sigreturn.
A flag in struct proc determines whether the process expects an old sigframe or a new sigframe. The signal trampoline handles which sigreturn to call. It does this by testing for a magic cookie in the frame.
The alpha uses osigreturn to implement longjmp. This means that osigreturn is not only used for compatibility with existing binaries. To handle the new sigset_t, setjmp saves it in sc_reserved (see NOTE).
the struct sigframe has been moved from frame.h to sigframe.h to handle the complex header dependencies that was caused by the new sigframe.
NOTE: For the i386, the size of jmp_buf has been increased to hold the new sigset_t. On the alpha this has been prevented by using sc_reserved in sigcontext.
|
#
50477 |
|
27-Aug-1999 |
peter |
$Id$ -> $FreeBSD$
|
#
48621 |
|
06-Jul-1999 |
cracauer |
Implement SA_SIGINFO for i386. Thanks to Bruce Evans for much more than a review, this was a nice puzzle.
This is supposed to be binary and source compatible with older applications that access the old FreeBSD-style three arguments to a signal handler.
Except those applications that access hidden signal handler arguments bejond the documented third one. If you have applications that do, please let me know so that we take the opportunity to provide the functionality they need in a documented manner.
Also except application that use 'struct sigframe' directly. You need to recompile gdb and doscmd. `make world` is recommended.
Example program that demonstrates how SA_SIGINFO and old-style FreeBSD handlers (with their three args) may be used in the same process is at http://www3.cons.org/tmp/fbsd-siginfo.c
Programs that use the old FreeBSD-style three arguments are easy to change to SA_SIGINFO (although they don't need to, since the old style will still work):
Old args to signal handler: void handler_sn(int sig, int code, struct sigcontext *scp)
New args: void handler_si(int sig, siginfo_t *si, void *third) where: old:code == new:second->si_code old:scp == &(new:si->si_scp) /* Passed by value! */
The latter is also pointed to by new:third, but accessing via si->si_scp is preferred because it is type-save.
FreeBSD implementation notes: - This is just the framework to make the interface POSIX compatible. For now, no additional functionality is provided. This is supposed to happen now, starting with floating point values. - We don't use 'sigcontext_t.si_value' for now (POSIX meant it for realtime-related values). - Documentation will be updated when new functionality is added and the exact arguments passed are determined. The comments in sys/signal.h are meant to be useful.
Reviewed by: BDE
|
#
47024 |
|
11-May-1999 |
luoqi |
Yet another place I missed when increasing trapframe size, which causes problem to SIGFPE handling.
Reviewed by: Bruce Evans <bde@zeta.org.au>
|
#
46129 |
|
27-Apr-1999 |
luoqi |
Enable vmspace sharing on SMP. Major changes are, - %fs register is added to trapframe and saved/restored upon kernel entry/exit. - Per-cpu pages are no longer mapped at the same virtual address. - Each cpu now has a separate gdt selector table. A new segment selector is added to point to per-cpu pages, per-cpu global variables are now accessed through this new selector (%fs). The selectors in gdt table are rearranged for cache line optimization. - fask_vfork is now on as default for both UP and SMP. - Some aio code cleanup.
Reviewed by: Alan Cox <alc@cs.rice.edu> John Dyson <dyson@iquest.net> Julian Elischer <julian@whistel.com> Bruce Evans <bde@zeta.org.au> David Greenman <dg@root.com>
|
#
27993 |
|
08-Aug-1997 |
dyson |
VM86 kernel support. Work done by BSDI, Jonathan Lemon <jlemon@americantv.com>, Mike Smith <msmith@gsoft.com.au>, Sean Eric Fagan <sef@kithrup.com>, and probably alot of others. Submitted by: Jnathan Lemon <jlemon@americantv.com>
|
#
22975 |
|
22-Feb-1997 |
peter |
Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not ready for it yet.
|
#
21673 |
|
14-Jan-1997 |
jkh |
Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!) avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been insane otherwise.
|
#
13765 |
|
30-Jan-1996 |
mpp |
Fix a bunch of spelling errors in the comment fields of a bunch of system include files.
|
#
12817 |
|
14-Dec-1995 |
phk |
Make math_emulators LKMable.
|
#
7090 |
|
16-Mar-1995 |
bde |
Add and move declarations to fix all of the warnings from `gcc -Wimplicit' (except in netccitt, netiso and netns) and most of the warnings from `gcc -Wnested-externs'. Fix all the bugs found. There were no serious ones.
|
#
1549 |
|
25-May-1994 |
rgrimes |
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.
Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
|
#
1051 |
|
31-Jan-1994 |
dg |
WINE/user LDT support from John Brezak, ported to FreeBSD by Jeffrey Hsu <hsu@soda.berkeley.edu>.
|
#
924 |
|
03-Jan-1994 |
dg |
Convert syscall to trapframe. Based on work done by John Brezak.
|
#
879 |
|
18-Dec-1993 |
wollman |
Make everything compile with -Wtraditional. Make it easier to distribute a binary link-kit. Make all non-optional options (pagers, procfs) standard, and update LINT to reflect new symtab requirements.
NB: -Wtraditional will henceforth be forgotten. This editing pass was primarily intended to detect any constructions where the old code might have been relying on traditional C semantics or syntax. These were all fixed, and the result of fixing some of them means that -Wall is now a realistic possibility within a few weeks.
|
#
827 |
|
03-Dec-1993 |
alm |
From: Jeffrey Hsu <hsu@soda.berkeley.edu>
The following patch adds the addr argument to signal handlers.
The kernel with the patch is no more and no less in compliance or in violation of POSIX and ANSI C than the kernel before the patch.
The added functionality this addr argument provides is quite useful. It enables an entire class of algorithms which use mprotect to trace memory references. Beside garbage collectors, I have heard of this technique being applied to debuggers and profilers. The only benchmarking I've performed is using akcl to compile maxima: without the kernel patch, it takes 7 hours to compile maxima, while with stratified garbage collection, it only takes 50 minutes.
Basically, I can't think of a reason not to add the addr argument and there is a compelling need for it.
If you find the patch acceptable, please let me know so I can send my FreeBSD akcl config files to wfs for inclusion in the core akcl release. The old 386BSD config files there won't work on either NetBSD or FreeBSD.
|
#
778 |
|
17-Nov-1993 |
wollman |
Fixed comments that start within a comment, so code compiles cleanly with -Wcomment.
|
#
719 |
|
07-Nov-1993 |
wollman |
Made all header files idempotent and moved incorrect common data from headers into a related source file. Added cons.h as first step towards moving i386/i386/cons.h to machine/cons.h where it belongs.
|
#
557 |
|
08-Oct-1993 |
rgrimes |
All: Remove patch kit headers, and add $Id$ This is mostly to align some more code with NetBSD.
cpu.h: Remove the old function vs. include configuration stuff that was ifdefed out when we went to inline functions. Remove the define of resettodr that made it a nop, there is already a function that makes it a nop, no need to #define one. Remove the #defines of processor types, they are now defined in cputypes.h, #include that file. Add struct cpu_nameclass for support of cpu types.
frame.h: include sys/signal.h, it will be needed in the future. put the sigframe structure here that was in machdep.c
pcb.h: Add multiple inclusion protection. Add pcb_ldt and pcb_ldt_len to pcb structure, this is for the user mode ldt.
|
#
5 |
|
12-Jun-1993 |
rgrimes |
This commit was generated by cvs2svn to compensate for changes in r4, which included commits to RCS files with non-trunk default branches.
|
#
4 |
|
12-Jun-1993 |
rgrimes |
Initial import, 0.1 + pk 0.2.4-B1
|