Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

MFC r261423, r261424, r261516, r261513, r261562, r261563, r261564, r261565,
r261596, r261606

Add the imx sdhci controller.

Move Open Firmware device root on PowerPC, ARM, and MIPS systems to
a sub-node of nexus (ofwbus) rather than direct attach under nexus. This
fixes FDT on x86 and will make coexistence with ACPI on ARM systems easier.
SPARC is unchanged.

Add the missing ')' at end of sentence. Reword it to use a more common idiom.

Pass the kernel physical address to initarm through the boot param struct.

Make functions only used in vfp.c static, and remove vfp_enable.

Fix __syscall on armeb EABI. As it returns a 64-bit value it needs to
place 32-bit data in r1, not r0. 64-bit data is already packed correctly.

Use abp_physaddr for the physical address over KERNPHYSADDR. This helps us
remove the need to load the kernel at a fixed address.

Remove references to PHYSADDR where it's used only in debugging output.

Dynamically generate the page table. This will allow us to detect the
physical address we are loaded at to change the mapping.

MFC r261351, r261352, r261355, r261396, r261397, r261398, r261403, r261404,
r261405

Open Firmware interrupt specifiers can consist of arbitrary-length byte
strings and include arbitrary information (IRQ line/domain/sense). When the
ofw_bus_map_intr() API was introduced, it assumed that, as on most systems,
these were either 1 cell, containing an interrupt line, or 2, containing
a line number plus a sense code. It turns out a non-negligible number of
ARM systems use 3 (or even 4!) cells for interrupts, so make this more
general.

Provide a simpler and more standards-compliant simplebus implementation to
get the Routerboard 800 up and running with the vendor device tree. This
does not implement some BERI-specific features (which hopefully won't be
necessary soon), so move the old code to mips/beri, with a higher attach
priority when built, until MIPS interrupt domain support is rearranged.

Allow nesting of simplebuses.

Add a set of helpers (ofw_bus_get_status() and ofw_bus_status_okay()) to
process "status" properties of OF nodes.

Fix one remnant endian flaw in nexus.

MFC r256994, r257016, r257055, r257059, r257060, r257075

Add two new interfaces to ofw_bus:
- ofw_bus_map_intr()
Maps an (iparent, IRQ) tuple to a system-global interrupt number in some
platform dependent way. This is meant to be implemented as a replacement
for [FDT_]MAP_IRQ() that is an MI interface that knows about the bus
hierarchy.
- ofw_bus_config_intr()
Configures an interrupt (previously mapped) based on firmware sense flags.
This replaces manual interpretation of the sense field in bus drivers and
will, in a follow-up, allow that interpretation to be redirected to the PIC
drivers where it belongs. This will eventually replace the tables in
/sys/dev/fdt/fdt_ARCH.c

The PowerPC/AIM code has been converted to use these globally, with an
implementation in terms of MAP_IRQ() and powerpc_config_intr(), assuming
OpenPIC, at the bus root in nexus(4). The ofw_bus_config_intr() will shortly
be integrated into pic_if.m and bounced through nexus into the PIC tree.

Factor out MI portions of the PowerPC nexus device into /sys/dev/ofw. The
sparc64 driver will be modified to use this shortly.

Allow PIC drivers to translate firmware sense codes for themselves. This
is designed to replace the tables in dev/fdt/fdt_ARCH.c, but will not
happen quite yet.

Do not map IRQs twice. This fixes PowerPC/FDT systems with multiple PICs,
which would try to treat the previously-mapped interrupts from
fdt_decode_intr() as interrupt line numbers on the same parent PIC.

Remove some of the code required for supporting ssm(4) on SPARC in favor
of a more PowerPC/FDT-focused design. Whenever SPARC64 is integrated
into this rework, this should be (trivially) revisited.

MFC r256932, r256938, r256966, r256953, r256967, r256969, r257015:

Add a new function (OF_getencprop()) that undoes the transformation applied
by encode-int. Specifically, it takes a set of 32-bit cell values and
changes them to host byte order. Most non-string instances of OF_getprop()
should be using this function, which is a no-op on big-endian platforms.

Use the new function all over the place.

MFC r256901, r256914 (by nwhitehorn):

Catch up on 6 years of improvements in Open Firmware nexus devices by
importing the sparc64 one. At least 90% of this code is MI and will be
moved into /sys/dev/ofw at some point in the future.

Ignore registers on devices where the reg property is malformed. Issue a
warning if this happens under bootverbose. This prevents some
strange-looking entries in dmesg for SMU devices on Apple G5 systems.

MFC r256814, r256816, r256818, r256846, r256855, r256864 (by nwhitehorn):

- Handle 2GB of ram
- Allow the OFW interrupt mapping code to work with PCI devices not
enumerated by Open Firmware, as in the case of FDT.
- Provide an interface for PCI bus drivers that need some of ofw_pci's
metadata during attach.
- Use standard ofw_bus helpers instead of reinventing the wheel.
- Make hard-wired TLB allocations be at minimum one page.

MFC r256792, r256793, r256799 (by nwhitehorn): Unify AIM and booke code.

Since the PS3 port was committed, the AIM nexus device works perfectly fine
on all PowerPC platforms, whether or not they have Open Firmware. Remove
some more duplication and have there be only one nexus driver.

Raise artificial limits on number of CPUs and number of interrupts.

Approved by: re (kib)

- There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
(bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
since r52045) but even recently added device drivers do this unnecessarily.
Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
Discussed with: jhb
- Also while at it, use __FBSDID.

Remove unused variables. Spotted by a cppcheck
(devel/cppcheck, http://sourceforge.net/projects/cppcheck) run.

Approved by: nwhitehorn (mentor)

Make AIM early-boot code function correctly without Open Firmware.

bus_add_child: change type of order parameter to u_int

This reflects actual type used to store and compare child device orders.
Change is mostly done via a Coccinelle (soon to be devel/coccinelle)
semantic patch.
Verified by LINT+modules kernel builds.

Followup to: r212213
MFC after: 10 days

Make nexus report name and compat fields as pnpinfo for devices on the
first level of hierarchy, same as done on deeper levels.

Remove an unnecessary include of opt_psim.h, which is not present on
powerpc64.

Configure interrupts on SMP systems to be distributed among all online
CPUs by default, and provide a functional version of BUS_BIND_INTR().
While here, fix some potential concurrency problems in the interrupt
handling code.

Provide for multiple, cascaded PICs on PowerPC systems, and extend the
OFW interrupt map interface to also return the device's interrupt parent.

MFC after: 8.1-RELEASE

Get nexus(4) out of the RTC business. The interface used by nexus(4)
in Open Firmware was Apple-specific, and we have complete coverage of Apple
system controllers, so move RTC responsibilities into the system controller
drivers. This avoids interesting problems from manipulating these devices
through Open Firmware behind the backs of their drivers.

Obtained from: NetBSD
MFC after: 2 weeks

Convert PowerPC AIM PCI and nexus busses to standard OFW bus interface. This
simplifies certain device attachments (Kauai ATA, for instance), and makes
possible others on new hardware.

On G5 systems, there are several otherwise standard PCI devices
(Serverworks SATA) that will not allow their interrupt properties to be
written, so this information must be supplied directly from Open Firmware.

Obtained from: sparc64

Switch to using genclock. Have nexus double as clock device for
now. While here, add a proper attach() method to nexus.

Requested by: phk

Forced commit to record that this file was repocopied from
src/sys/powerpc/powerpc and modified for its new location.

Revamp the interrupt handling in support of INTR_FILTER. This includes:
o Revamp the PIC I/F to only abstract the PIC hardware. The
resource handling has been moved to nexus, where it belongs.
o Include EOI and MASK+EOI methods to the PIC I/F in support of
INTR_FILTER.
o With the allocation of interrupt resources and setup of
interrupt handlers in the common platform code we can delay
talking to the PIC hardware after enumeration of all devices.
Introduce a call to powerpc_intr_enable() in configure_final()
to achieve that and have powerpc_setup_intr() only program the
PIC when !cold.
o As a consequence of the above, remove all early_attach() glue
from the OpenPIC and Heathrow PIC drivers and have them
register themselves when they're found during enumeration.
o Decouple the interrupt vector from the interrupt request line.
Allocate vectors increasingly so that they can be used for
the intrcnt index as well. Extend the Heathrow PIC driver to
translate between IRQ and vector. The OpenPIC driver already
has the support for vectors in hardware.

Approved by: re (blanket)

Add ofw bus methods to the ppc nexus driver. This will be used in future
EFIKA platform support.

PR: 111522
Submitted by: Andrew Turner, andrew at fubar geek nz

Update openpic to support the new bus_setup_intr() syntax.

Reviewed by: marcel

/* -> /*- for license, minor formatting changes

Instead of "OpenFirmware", "openfirmware", etc. use the official spelling
"Open Firmware" from IEEE 1275 and OpenFirmware.org (no pun intended).

Ok'ed by: tmm

Catchup to now-required <sys/module.h> for PowerPC

- constify devinfo strings to eliminate compile warning
- remove trailing whitespace

Allow child devices to set the OpenFirmware device node ivar

Remove hard-coded knowledge of specific OFW devices. Use bus_generic_probe
and add_child entry point to allow devices to use the identify
method to add themselves if need be (e.g. openpic, syscons).
Export interrupt-controller-add routine for extern int cntlr drivers.
Eliminate recursive OFW device-tree walk and only iterate the
top-level ala sparc64. Allow child devices to set the device
type with write_ivars.

Step 1 of many in removing the hard-dependency on OpenFirmware.

Back out M_* changes, per decision of the TRB.

Approved by: trb

Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.

psim device support

Approved by: benno

Remove some diagnostic code that snuck in.

- Add the "compatible" property to the list that we keep in ivars.
- Add interrupt alloc/setup/teardown/dealloc support, via whichever PIC
OpenFirmware gives us.

Add a nexus device.

Copied from: sparc64