Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Migrate structs arpstat, icmpstat, mrtstat, pimstat and udpstat to PCPU
counters.

Prepare network statistics structures for migration to PCPU counters.
Use uint64_t as type for all fields of structures.

Changed structures: ahstat, arpstat, espstat, icmp6_ifstat, icmp6stat,
in6_ifstat, ip6stat, ipcompstat, ipipstat, ipsecstat, mrt6stat, mrtstat,
pfkeystat, pim6stat, pimstat, rip6stat, udpstat.

Discussed with: arch@

- Merge changes to the base system to support OFED. These include
a wider arg2 for sysctl, updates to vlan code, IFT_INFINIBAND,
and other miscellaneous small features.

Add ARP statistics to the kernel and netstat.

New counters now exist for:
requests sent
replies sent
requests received
replies received
packets received
total packets dropped due to no ARP entry
entrys timed out
Duplicate IPs seen

The new statistics are seen in the netstat command
when it is given the -s command line switch.

MFC after: 2 weeks
In collaboration with: bz

- Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
through ifp anyway. IF_LLADDR() works faster, and all (except
one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
and drop the IFP2ENADDR() macro; all users have been converted
to use IF_LLADDR() instead.

- Make IFP2ENADDR() a pointer to IF_LLADDR() rather than another
copy of Ethernet address.

- Change iso88025_ifattach() and fddi_ifattach() to accept MAC
address as an argument, similar to ether_ifattach(), to make
this work.

Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.

Reviewed by: sobomax, sam

/* -> /*- for license, minor formatting changes

Add a new driver to support IP over firewire. This driver is intended to
conform to the rfc2734 and rfc3146 standard for IP over firewire and
should eventually supercede the fwe driver. Right now the broadcast
channel number is hardwired and we don't support MCAP for multicast
channel allocation - more infrastructure is required in the firewire
code itself to fix these problems.

+ rename and document an unused field in struct arpcom (field is still
there so there are no ABI changes);
+ replace 5 redefinitions of the IPF2AC macro with one in if_arp.h

Eventually (but before freezing the ABI) we need to get rid of
struct arpcom (initially with the help of some smart #defines
to avoid having to touch each and every driver, see below).

Apart from the struct ifnet, struct arpcom now only stores a copy
of the MAC address (ac_enaddr, but we already have another copy in
the struct ifnet -- if_addrhead), and a netgraph-specific field
which is _always_ accessed through the ifp, so it might well go
into the struct ifnet too (where, besides, there is already an entry
for AF_NETGRAPH data...)

Too bad ac_enaddr is widely referenced by all drivers. But
this can be fixed as follows:

#define ac_enaddr ac_if.the_original_ac_enaddr_in_struct_ifnet

(note that the right hand side would likely be a pointer rather than
the base address of an array.)

Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson

- Use if_broadcastaddr from struct ifnet rather than relying on
extern 'etherbroadcastaddr'.
- Make 'etherbroadcastaddr' static.

Reviewed by: imp

bring in ARP support for variable length link level addresses

Reviewed by: jdp
Approved by: jdp
Obtained from: NetBSD
MFC after: 6 weeks

Make the ng_ether(4) node type dynamically loadable like the rest.
This means 'options NETGRAPH' is no longer necessary in order to get
netgraph-enabled Ethernet interfaces. This supports loading/unloading
the ng_ether.ko and attaching/detaching the Ethernet interface in any
order.

Add two new hooks 'upper' and 'lower' to allow access to the protocol
demux engine and the raw device, respectively. This enables bridging
to be defined as a netgraph node, if so desired.

Reviewed by: freebsd-net@freebsd.org

Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot). This is consistant with the other
BSD's who made this change quite some time ago. More commits to come.

Whistle's Netgraph link-layer (sometimes more) networking infrastructure.
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.

Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from: Whistle CVS tree

$Id$ -> $FreeBSD$

World, I'd like you to meet the first FreeBSD token Ring driver.
This is for various Olicom cards. An IBM driver is following.
This patch also adds support to tcpdump to decode packets on tokenring.
Congratulations to the proud father.. (below)

Submitted by: Larry Lile <lile@stdio.com>

Fixed change prerequisites for <net/if_arp.h>:
- don't declare `struct arpcom' except in the kernel, so that there is no
dependency on <net/if.h> except in the kernel. This may break something
else.
- spell ETHER_ADDR_LEN as 6 again, so that there is no dependency on
<net/ethernet.h> even in the kernel.

Make INET a proper option.

This will not make any of object files that LINT create change; there
might be differences with INET disabled, but hardly anything compiled
before without INET anyway. Now the 'obvious' things will give a
proper error if compiled without inet - ipx_ip, ipfw, tcp_debug. The
only thing that _should_ work (but can't be made to compile reasonably
easily) is sppp :-(

This commit move struct arpcom from <netinet/if_ether.h> to
<net/if_arp.h>.

Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.

Make the long-awaited change from $Id$ to $FreeBSD$

This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.

Removed nested include if <sys/socket.h> from <net/if.h> and
<net/if_arp.h> and fixed the things that depended on it. The nested
include just allowed unportable programs to compile and made my
simple #include checking program report that networking code doesn't
need to include <sys/socket.h>.

#include <socket.h> -> <sys/socket.h>

Include <sys/socket.h> for declaration of struct sockaddr. This helps
genassym compile when KERNEL is not defined.

Uniformize idempotency ifdef.

Make idempotent.

Submitted by: Paul

Added $Id$

This commit was generated by cvs2svn to compensate for changes in r1541,
which included commits to RCS files with non-trunk default branches.

BSD 4.4 Lite Kernel Sources