#
272461 |
|
02-Oct-2014 |
gjb |
Copy stable/10@r272459 to releng/10.1 as part of the 10.1-RELEASE process.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
269398 |
|
01-Aug-2014 |
rmacklem |
MFC: r268115 Merge the NFSv4.1 server code in projects/nfsv4.1-server over into head. The code is not believed to have any effect on the semantics of non-NFSv4.1 server behaviour. It is a rather large merge, but I am hoping that there will not be any regressions for the NFS server.
|
#
256281 |
|
10-Oct-2013 |
gjb |
Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
249592 |
|
17-Apr-2013 |
ken |
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server.
The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support.
This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching.
The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed.
This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order.
In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code.
This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time.
I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS.
The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another.
sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built.
sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode.
sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs.
sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro.
sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call.
sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code.
Add the malloc flag argument to newnfs_realign().
Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code.
sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type.
sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE.
sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc.
There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before.
In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module.
In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused.
The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread.
The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread.
Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc.
Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread.
Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage.
Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons.
nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them.
Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread.
sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the
The shims contain all of the code and definitions that are specific to the NFS servers.
They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables.
sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign().
sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c.
sys/modules/nfsserver/Makefile: Add nfs_fha_old.c.
Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
|
#
244042 |
|
08-Dec-2012 |
rmacklem |
Move the NFSv4.1 client patches over from projects/nfsv4.1-client to head. I don't think the NFS client behaviour will change unless the new "minorversion=1" mount option is used. It includes basic NFSv4.1 support plus support for pNFS using the Files Layout only. All problems detecting during an NFSv4.1 Bakeathon testing event in June 2012 have been resolved in this code and it has been tested against the NFSv4.1 server available to me. Although not reviewed, I believe that kib@ has looked at it.
|
#
241896 |
|
22-Oct-2012 |
kib |
Remove the support for using non-mpsafe filesystem modules.
In particular, do not lock Giant conditionally when calling into the filesystem module, remove the VFS_LOCK_GIANT() and related macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does not result in the interface signatures changes.
Conducted and reviewed by: attilio Tested by: pho
|
#
240289 |
|
09-Sep-2012 |
rmacklem |
Add a simple printf() based debug facility to the new nfs client. Use it for a printf() that can be harmlessly generated for mmap()'d files. It will be used extensively for the NFSv4.1 client. Debugging printf()s are enabled by setting vfs.nfs.debuglevel to a non-zero value. The higher the value, the more debugging printf()s.
Reviewed by: jhb MFC after: 2 weeks
|
#
239039 |
|
04-Aug-2012 |
kib |
The header uma_int.h is internal uma header, unused by this source file. Do not include it needlessly.
Reviewed by: alc MFC after: 1 week
|
#
231805 |
|
16-Feb-2012 |
rmacklem |
Delete a couple of out of date comments that are no longer true in the new NFS client.
Requested by: bde MFC after: 1 week
|
#
229956 |
|
11-Jan-2012 |
rmacklem |
jwd@ reported via email that the "CacheSize" field reported by "nfsstat -e -s" would go negative after using the "-z" option to zero out the stats. This patch fixes that by not zeroing out the srvcache_size field for "-z", since it is the size of the cache and not a counter.
MFC after: 2 weeks
|
#
224121 |
|
17-Jul-2011 |
zack |
Revert revision 224079 as Rick pointed out that I would be calling VOP_PATHCONF without the vnode lock held.
Implicitly approved by: zml (mentor)
|
#
224086 |
|
16-Jul-2011 |
zack |
Add DEXITCODE plumbing to NFS.
Isilon has the concept of an in-memory exit-code ring that saves the last exit code of a function and allows for stack tracing. This is very helpful when debugging tough issues.
This patch is essentially a no-op for BSD at this point, until we upstream the dexitcode logic itself. The patch adds DEXITCODE calls to every NFS function that returns an errno error code. A number of code paths were also reorganized to have single exit paths, to reduce code duplication.
Submitted by: David Kwan <dkwan@isilon.com> Reviewed by: rmacklem Approved by: zml (mentor) MFC after: 2 weeks
|
#
224079 |
|
16-Jul-2011 |
zack |
Change loadattr and fillattr to ask the file system for the pathconf variable.
Small modification where VOP_PATHCONF was being called directly.
Reviewed by: rmacklem Approved by: zml (mentor) MFC after: 2 weeks
|
#
224078 |
|
16-Jul-2011 |
zack |
Move nfsvno_pathconf to be accessible to sys/fs/nfs; no functionality change.
Reviewed by: rmacklem Approved by: zml (mentor) MFC after: 2 weeks
|
#
221973 |
|
15-May-2011 |
rmacklem |
Change the sysctl naming for the old and new NFS clients to vfs.oldnfs.xxx and vfs.nfs.xxx respectively. This makes the default nfs client use vfs.nfs.xxx after r221124.
|
#
221439 |
|
04-May-2011 |
rmacklem |
Add kernel support for NFSSVC_ZEROCLTSTATS and NFSSVC_ZEROSRVSTATS so that they can be used by nfsstat(1) to implement the "-z" option for the new NFS subsystem.
MFC after: 2 weeks
|
#
221438 |
|
04-May-2011 |
rmacklem |
Revert r221306, since NFSSVC_ZEROSTATS zero'd both client and server stats, when separate modifiers for NFSSVC_GETSTATS for each of client and server stats is what it required by nfsstat(1).
|
#
221306 |
|
01-May-2011 |
rmacklem |
Add the kernel support needed to zero out the nfsstats structure for the new NFS subsystem. This will be used by nfsstats.c to implement the "-z" option.
MFC after: 2 weeks
|
#
220751 |
|
17-Apr-2011 |
rmacklem |
Fix up some of the sysctls for the experimental NFS client so that they use the same names as the regular client. Also add string descriptions for them.
MFC after: 2 weeks
|
#
220648 |
|
14-Apr-2011 |
rmacklem |
Fix the experimental NFSv4 server so that it uses VOP_PATHCONF() to determine if a file system supports NFSv4 ACLs. Since VOP_PATHCONF() must be called with a locked vnode, the function is called before nfsvno_fillattr() and the result is passed in as an extra argument.
MFC after: 2 weeks
|
#
210268 |
|
19-Jul-2010 |
rmacklem |
For the experimental NFSv4 server's dumplocks operation, add the MPSAFE flag to cn_flags so that it doesn't panic. The panics weren't seen since nfsdumpstate(8) is broken for the "-l" case, so this was never done. I'll do a separate commit to fix nfsdumpstate(8).
Submitted by: zack.kirsch at isilon.com MFC after: 2 weeks
|
#
207170 |
|
24-Apr-2010 |
rmacklem |
An NFSv4 server will reply NFSERR_GRACE for non-recovery RPCs during the grace period after startup. This grace period must be at least the lease duration, which is typically 1-2 minutes. It seems prudent for the experimental NFS client to wait a few seconds before retrying such an RPC, so that the server isn't flooded with non-recovery RPCs during recovery. This patch adds an argument to nfs_catnap() to implement a 5 second delay for this case.
MFC after: 1 week
|
#
206688 |
|
15-Apr-2010 |
rmacklem |
The experimental NFS client was not filling in recovery credentials for opens done locally in the client when a delegation for the file was held. This could cause the client to crash in crsetgroups() when recovering from a server crash/reboot. This patch fills in the recovery credentials for this case, in order to avoid the client crash. Also, add KASSERT()s to the credential copy functions, to catch any other cases where the credentials aren't filled in correctly.
MFC after: 1 week
|
#
205941 |
|
30-Mar-2010 |
rmacklem |
This patch should fix handling of byte range locks locally on the server for the experimental nfs server. When enabled by setting vfs.newnfs.locallocks_enable to non-zero, the experimental nfs server will now acquire byte range locks on the file on behalf of NFSv4 clients, such that lock conflicts between the NFSv4 clients and processes running locally on the server, will be recognized and handled correctly.
MFC after: 2 weeks
|
#
205572 |
|
24-Mar-2010 |
rmacklem |
Fix the experimental NFS subsystem so that it uses the correct preprocessor macro name for not requiring strict data alignment.
Suggested by: marius MFC after: 2 weeks
|
#
200069 |
|
03-Dec-2009 |
trasz |
Remove unneeded ifdefs.
Reviewed by: rmacklem
|
#
194498 |
|
19-Jun-2009 |
brooks |
Rework the credential code to support larger values of NGROUPS and NGROUPS_MAX, eliminate ABI dependencies on them, and raise the to 1024 and 1023 respectively. (Previously they were equal, but under a close reading of POSIX, NGROUPS_MAX was defined to be too large by 1 since it is the number of supplemental groups, not total number of groups.)
The bulk of the change consists of converting the struct ucred member cr_groups from a static array to a pointer. Do the equivalent in kinfo_proc.
Introduce new interfaces crcopysafe() and crsetgroups() for duplicating a process credential before modifying it and for setting group lists respectively. Both interfaces take care for the details of allocating groups array. crsetgroups() takes care of truncating the group list to the current maximum (NGROUPS) if necessary. In the future, crsetgroups() may be responsible for insuring invariants such as sorting the supplemental groups to allow groupmember() to be implemented as a binary search.
Because we can not change struct xucred without breaking application ABIs, we leave it alone and introduce a new XU_NGROUPS value which is always 16 and is to be used or NGRPS as appropriate for things such as NFS which need to use no more than 16 groups. When feasible, truncate the group list rather than generating an error.
Minor changes: - Reduce the number of hand rolled versions of groupmember(). - Do not assign to both cr_gid and cr_groups[0]. - Modify ipfw to cache ucreds instead of part of their contents since they are immutable once referenced by more than one entity.
Submitted by: Isilon Systems (initial implementation) X-MFC after: never PR: bin/113398 kern/133867
|
#
192898 |
|
27-May-2009 |
rmacklem |
Add a function to the experimental nfs subsystem that tests to see if a local file system supports NFSv4 ACLs. This allows the NFSHASNFS4ACL() macro to be correctly implemented. The NFSv4 ACL support should now work when the server exports a ZFS volume.
Approved by: kib (mentor)
|
#
192695 |
|
24-May-2009 |
rmacklem |
Crib the realign function out of nfs_krpc.c and add a call to it for the client side reply. Hopefully this fixes the problem with using the new krpc for arm for the experimental nfs client.
Approved by: kib (mentor)
|
#
191783 |
|
04-May-2009 |
rmacklem |
Add the experimental nfs subtree to the kernel, that includes support for NFSv4 as well as NFSv2 and 3. It lives in 3 subdirs under sys/fs: nfs - functions that are common to the client and server nfsclient - a mutation of sys/nfsclient that call generic functions to do RPCs and handle state. As such, it retains the buffer cache handling characteristics and vnode semantics that are found in sys/nfsclient, for the most part. nfsserver - the server. It includes a DRC designed specifically for NFSv4, that is used instead of the generic DRC in sys/rpc. The build glue will be checked in later, so at this point, it consists of 3 new subdirs that should not affect kernel building.
Approved by: kib (mentor)
|