#
272461 |
|
02-Oct-2014 |
gjb |
Copy stable/10@r272459 to releng/10.1 as part of the 10.1-RELEASE process.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
256281 |
|
10-Oct-2013 |
gjb |
Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
227908 |
|
23-Nov-2011 |
marius |
Use DEVMETHOD_END.
|
#
226154 |
|
08-Oct-2011 |
marius |
- Follow the lead of dcphy(4) and pnphy(4) and move the reminder of the PHY drivers that only ever attach to a particular MAC driver, i.e. inphy(4), ruephy(4) and xlphy(4), to the directory where the respective MAC driver lives and only compile it into the kernel when the latter is also there, also removing it from miibus.ko and moving it into the module of the respective MAC driver. - While at it, rename exphy.c, which comes from NetBSD where the MAC driver it corresponds to also is named ex(4) instead of xl(4) but that in FreeBSD actually identifies itself as xlphy(4), and its function names accordingly for consistency. - Additionally while at it, fix some minor style issues like whitespace in the register headers and add multi-inclusion protection to inphyreg.h.
|
#
221407 |
|
03-May-2011 |
marius |
- Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP (reporting IFM_LOOP based on BMCR_LOOP is left in place though as it might provide useful for debugging). For most mii(4) drivers it was unclear whether the PHYs driven by them actually support loopback or not. Moreover, typically loopback mode also needs to be activated on the MAC, which none of the Ethernet drivers using mii(4) implements. Given that loopback media has no real use (and obviously hardly had a chance to actually work) besides for driver development (which just loopback mode should be sufficient for though, i.e one doesn't necessary need support for loopback media) support for it is just dropped as both NetBSD and OpenBSD already did quite some time ago. - Let mii_phy_add_media() also announce the support of IFM_NONE. - Restructure the PHY entry points to use a structure of entry points instead of discrete function pointers, and extend this to include a "reset" entry point. Make sure any PHY-specific reset routine is always used, and provide one for lxtphy(4) which disables MII interrupts (as is done for a few other PHYs we have drivers for). This includes changing NIC drivers which previously just called the generic mii_phy_reset() to now actually call the PHY-specific reset routine, which might be crucial in some cases. While at it, the redundant checks in these NIC drivers for mii->mii_instance not being zero before calling the reset routines were removed because as soon as one PHY driver attaches mii->mii_instance is incremented and we hardly can end up in their media change callbacks etc if no PHY driver has attached as mii_attach() would have failed in that case and not attach a miibus(4) instance. Consequently, NIC drivers now no longer should call mii_phy_reset() directly, so it was removed from EXPORT_SYMS. - Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe(). The purpose of that function is to perform the common steps to attach a PHY driver instance and to hook it up to the miibus(4) instance and to optionally also handle the probing, addition and initialization of the supported media. So all a PHY driver without any special requirements has to do in its bus attach method is to call mii_phy_dev_attach() along with PHY-specific MIIF_* flags, a pointer to its PHY functions and the add_media set to one. All PHY drivers were updated to take advantage of mii_phy_dev_attach() as appropriate. Along with these changes the capability mask was added to the mii_softc structure so PHY drivers taking advantage of mii_phy_dev_attach() but still handling media on their own do not need to fiddle with the MII attach arguments anyway. - Keep track of the PHY offset in the mii_softc structure. This is done for compatibility with NetBSD/OpenBSD. - Keep track of the PHY's OUI, model and revision in the mii_softc structure. Several PHY drivers require this information also after attaching and previously had to wrap their own softc around mii_softc. NetBSD/OpenBSD also keep track of the model and revision on their mii_softc structure. All PHY drivers were updated to take advantage as appropriate. - Convert the mebers of the MII data structure to unsigned where appropriate. This is partly inspired by NetBSD/OpenBSD. - According to IEEE 802.3-2002 the bits actually have to be reversed when mapping an OUI to the MII ID registers. All PHY drivers and miidevs where changed as necessary. Actually this now again allows to largely share miidevs with NetBSD, which fixed this problem already 9 years ago. Consequently miidevs was synced as far as possible. - Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that weren't explicitly converted to support flow control before. It's unclear whether flow control actually works with these but typically it should and their net behavior should be more correct with these changes in place than without if the MAC driver sets MIIF_DOPAUSE.
Obtained from: NetBSD (partially) Reviewed by: yongari (earlier version), silence on arch@ and net@
|
#
213893 |
|
15-Oct-2010 |
marius |
Convert the PHY drivers to honor the mii_flags passed down and convert the NIC drivers as well as the PHY drivers to take advantage of the mii_attach() introduced in r213878 to get rid of certain hacks. For the most part these were: - Artificially limiting miibus_{read,write}reg methods to certain PHY addresses; we now let mii_attach() only probe the PHY at the desired address(es) instead. - PHY drivers setting MIIF_* flags based on the NIC driver they hang off from, partly even based on grabbing and using the softc of the parent; we now pass these flags down from the NIC to the PHY drivers via mii_attach(). This got us rid of all such hacks except those of brgphy() in combination with bce(4) and bge(4), which is way beyond what can be expressed with simple flags.
While at it, I took the opportunity to change the NIC drivers to pass up the error returned by mii_attach() (previously by mii_phy_probe()) and unify the error message used in this case where and as appropriate as mii_attach() actually can fail for a number of reasons, not just because of no PHY(s) being present at the expected address(es).
Reviewed by: jhb, yongari
|
#
213364 |
|
02-Oct-2010 |
marius |
- In the spirit of previous simplifications factor out the checks for a different PHY instance being selected and isolation out into the wrappers around the service methods rather than duplicating them over and over again (besides, a PHY driver shouldn't need to care about which instance it actually is). - Centralize the check for the need to isolate a non-zero PHY instance not supporting isolation in mii_mediachg() and just ignore it rather than panicing, which should sufficient given that a) things are likely to just work anyway if one doesn't plug in more than one port at a time and b) refusing to attach in this case just leaves us in a unknown but most likely also not exactly correct configuration (besides several drivers setting MIIF_NOISOLATE didn't care about these anyway, probably due to setting this flag for no real reason). - Minor fixes like removing unnecessary setting of sc->mii_anegticks, using sc->mii_anegticks instead of hardcoded values etc.
|
#
213229 |
|
27-Sep-2010 |
marius |
Use the mii_data provided via mii_attach_args and mii_pdata respectively instead of reaching out for the softc of the parent.
|
#
213188 |
|
26-Sep-2010 |
marius |
- Remove clause 3 and 4 from TNF licenses. - Remove closes 3 & 4 from Manuel Bouyer's license.
Obtained from: NetBSD
|
#
165988 |
|
12-Jan-2007 |
marius |
- Take advantage of mii_phy_dev_probe(). - In exphy_service() for the MII_TICK case don't bother to check whether the currently selected media is of type IFM_AUTO as auto-negotiation doesn't need to be kicked anyway. - Remove #if 0'ed unapplicable code. - Fix some whitespace nits.
MFC after: 1 week
|
#
165985 |
|
12-Jan-2007 |
marius |
Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table indices when manually adding media. Some of these I've missed while converting drivers to take advantage of said fuctions recently, others where longstanding bugs.
|
#
160076 |
|
03-Jul-2006 |
yongari |
Replace hard-coded magic constants to system defined constants (BUS_PROBE_DEFAULT, BUS_PROBE_GENERIC etc). There is no functional changes.
Reviewed by: oleg, scottl
|
#
150763 |
|
30-Sep-2005 |
imp |
Use ansi function definitions in preference to K&R to reduce diffs with NetBSD (and cause it looks cooler).
|
#
139749 |
|
05-Jan-2005 |
imp |
Start each of the license/copyright comments with /*-, minor shuffle of lines
|
#
129844 |
|
29-May-2004 |
marius |
Remove double __FBSDID and move the remaining one into a common place after the license(s) and before the driver comment (the latter only in drivers not having __FBSDID at that location).
|
#
119418 |
|
24-Aug-2003 |
obrien |
Use __FBSDID(). Also some minor style cleanups.
|
#
113038 |
|
03-Apr-2003 |
obrien |
Use __FBSDID rather than rcsid[].
|
#
109514 |
|
19-Jan-2003 |
obrien |
Remove miidevs.h and generate it from miidevs at compile time. The devlist2h.awk tool to do this has been repocopied to sys/tools/.
|
#
105135 |
|
14-Oct-2002 |
alfred |
Put function return types on a line by themselves. Cleanup my earlier de-__P sweep and remove whitespace between function names and paramters.
|
#
99439 |
|
05-Jul-2002 |
benno |
Use 3C905C instead of 3c905Cphy as the identifier for the Broadcom PHY used in the 3C905C. This is mainly cosmetic.
I'm doing this mainly so we share the same identifier as NetBSD.
|
#
95723 |
|
29-Apr-2002 |
phk |
Convert exphy and ukphy over to the new code.
exphy is done flying blind, ukphy is tested on one card.
|
#
95722 |
|
29-Apr-2002 |
phk |
Make one generic mii_phy_detach() to replace 19 slightly different ones.
Rename mii_phy_auto_stop() mii_phy_down().
Introduce mii_down(), use it from nge. Do not indirect it to 19 identical case's in 19 switchstatements like NetBSD did.
|
#
95667 |
|
28-Apr-2002 |
phk |
Don't pass three args when one will do just fine, and even prevent mistakes like the one brgphy.c (now corrected).
|
#
95665 |
|
28-Apr-2002 |
phk |
Improve an API by about 4 lines per driver.
|
#
92739 |
|
20-Mar-2002 |
alfred |
Remove __P.
|
#
84145 |
|
29-Sep-2001 |
jlemon |
Cleanup pass for mii drivers. . Make internal service routines static. . Use a consistent ordering of checks in MII_TICK. Do the work in the mii_phy_tick() subroutine if appropriate. . Call mii_phy_update() to trigger the callbacks.
|
#
69925 |
|
12-Dec-2000 |
wpaul |
Grrrrr. That last commit was supposed to be to the head, not to -stable (even though I want the fixes in -stable anyway). I'm sure I'm going to get flamed now for committing to -stable and -current too quickly. *sigh*
|
#
59391 |
|
19-Apr-2000 |
phk |
Remove ~25 unneeded #include <sys/conf.h> Remove ~60 unneeded #include <sys/malloc.h>
|
#
50758 |
|
01-Sep-1999 |
wpaul |
Re-arrange things in the attach routines of the 3Com and RealTek PHY drivers so that we don't clobber things or leave them uninitialized if we abort due a failure.
Submitted by: Luoqi Chen
|
#
50577 |
|
29-Aug-1999 |
wpaul |
The ASIC on the 3c905C appears to be manufactured by Broadcom (previous ones were made by Lucent). The Broadcom chip also appears to use an internal PHY made by Broadcom which uses the Broadcom OUI. This is different from previous ASICs which always returned 0 in the PHY ID registers. To account for this, I added the necessary ID values for the Broadcom PHY so that it can be detected and attached using the 3Com PHY driver instead of defaulting to the generic one.
|
#
50477 |
|
27-Aug-1999 |
peter |
$Id$ -> $FreeBSD$
|
#
50120 |
|
21-Aug-1999 |
wpaul |
This commit adds support for the NetBSD MII abstraction layer and MII-compliant PHY drivers. Many 10/100 ethernet NICs available today either use an MII transceiver or have built-in transceivers that can be programmed using an MII interface. It makes sense then to separate this support out into common code instead of duplicating it in all of the NIC drivers. The mii code also handles all of the media detection, selection and reporting via the ifmedia interface.
This is basically the same code from NetBSD's /sys/dev/mii, except it's been adapted to FreeBSD's bus architecture. The advantage to this is that it automatically allows everything to be turned into a loadable module. There are some common functions for use in drivers once an miibus has been attached (mii_mediachg(), mii_pollstat(), mii_tick()) as well as individual PHY drivers. There is also a generic driver for all PHYs that aren't handled by a specific driver. It's possible to do this because all 10/100 PHYs implement the same general register set in addition to their vendor-specific register sets, so for the most part you can use one driver for pretty much any PHY. There are a couple of oddball exceptions though, hence the need to have specific drivers.
There are two layers: the generic "miibus" layer and the PHY driver layer. The drivers are child devices of "miibus" and the "miibus" is a child of a given NIC driver. The "miibus" code and the PHY drivers can actually be compiled and kldoaded as completely separate modules or compiled together into one module. For the moment I'm using the latter approach since the code is relatively small.
Currently there are only three PHY drivers here: the generic driver, the built-in 3Com XL driver and the NS DP83840 driver. I'll be adding others later as I convert various NIC drivers to use this code.
I realize that I'm cvs adding this stuff instead of importing it onto a separate vendor branch, but in my opinion the import approach doesn't really offer any significant advantage: I'm going to be maintaining this stuff and writing my own PHY drivers one way or the other.
|