Copy stable/10@r272459 to releng/10.1 as part of
the 10.1-RELEASE process.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Remove opt_wi.h

The APDL-325 is a Wireless LAN pcmcia adapter that sits inside some
Billion Access Points. Fix wi(4) to recognise the adapter.

PR: 77913
Submitted by: Daan Vreeken [PA4DAN]
MFC after: 3 days

Add an altnerative Siemens SpeedStream ID. This one is for a Prism 3
card. I got a pair of these at a garage sale for US$1.00 today...

Multi-bss (aka vap) support for 802.11 devices.

Note this includes changes to all drivers and moves some device firmware
loading to use firmware(9) and a separate module (e.g. ral). Also there
no longer are separate wlan_scan* modules; this functionality is now
bundled into the wlan module.

Supported by: Hobnob and Marvell
Reviewed by: many
Obtained from: Atheros (some bits)

Add ELSA XI330 product. This is rebadged and sold as SMC 2532W-B and
I/O Data also resells it. Add an alternative airvast an100 id.

MFp4: save mac addr hint, eliminage OLDCARD shims

Add a boatload of new device ids, gleaned from the pcmcia-cs-3.2.8
distribution. Add the appropriate devices to the man pages.

Obtained from: pcmcia-cs
Approved by: re (scottl)

Eliminate unused argument in PCMCIA_CARD macro.

Provide a backwards compatible way to have the extra macro by defining
PCCARD_API_LEVEL 5 before including pccarddevs for driver writers that
want/need to have the same driver on 5 and 6 with pccard attachments.

Approved by: re (dwhite)

Unbreak style(9) breakage from last commit. We try to avoid defining
variables in internal blocks.
Also, go ahead and fail if we can't load the firmware. It should have
failed like this, but never did (firmware loads generally don't fail).

Unbreak LINT.

purge dead code

Noticed by: Coverity Prevent analysis tool

The two PLANEX cards listed in pccarddevs, identified only by their
CIS, weren't actually used anywhere (other than the generic PC Card
code when certain variables are defined). They aren't used in NetBSD
either. Make things simpler by removing them. Change PLANEX_2 to
PLANEX and tweak wi and owi to use that instead. The PLANEX id seems
to actually be pci ID assigned to planex, not its pcmcia id. Ooops.
I don't know if this is a reporting error from where this entry came
from, or if it is a mistake on PLANEX's part. I suspect the latter,
as ACTIONTEC and NEWMEDIA made the same mistake (although new media
may be because it uses an advansys chip inside). Make a note of this
in the file. The 0xc entires may be JEITA assigned, so note that as
well.

# This leaves just 3 entries that are totally unknown: airvast, archos
# and edimax although the arivast number is the same assigned to
# avertec in usb...

Use Intersil chip names for the symbols, since many makers use the
intersil IDs but their own name in the CIS.

Add support for SENAO SL-2511CD

Info submitted by: Paulo Fragoso

Call wi_free after we turn off the interrupts. If we call it before,
then we reference parts of the softc.

# My appologies, but this was sent to me by someone whose name I've lost.

Start each of the license/copyright comments with /*-, minor shuffle of lines

Only match cards that claim to be network cards. I've had two
different cards that matched vendor/id, but weren't wi cards. This is
because the vendor foolishly didn't have unique product ids. Symbol
has a serial card that would otherwise match the wi driver, for
example...

Taken from a patch for xe posted by: Carlos Velasco

Fix disordering of pccarddevs.h noticed by bde. Also remove a few
redundant includes and fix some of the include disordering.

Submitted by: bde

Move to generating pccarddevs.h on the fly, both for the kernel and
the modules.

Also generate usbdevs.h automatically now, but a non-kernel file is
stopping that at the moment.

It turns out that the module dependency on pccard is in error. Since
there's not dependencies on pccard symboles, such a dependency is not
necessary. This means that drivers that have multiple attachments can
not drag bogus devices into the kernel at load time.

We can't (yet) do this with pci and isa. Drivers written for them
actually do seem to have symbols that depend on these busses'
implementation code.

ndis not touched until other things can be tested.

Add support for a new variant of the prism3 that has appaered in the
wild. This one is marketed by D-Link model DWL-650, but appears to be
a ISL3710P-10 under the hood.

Reported by: Brian O'Shea

Fix slight disordering of supported cards.

Sony PEGA-WL110 Wireless LAN

Obtained from: NetBSD (onoe-san)

New Proxim Harmony OEM card.

Submitted by: Jeremy Bingham

o add experimental radiotap capture format
o add netbsd logic to convert rssi to device-independent values

Obtained from: NetBSD (rssi conversion code)

This doesn't work, so back them out.

Return -100 rather than 0 for pccard probe routines. This allows
other drivers to attach to these cards, if so desired.

LINKSYS2 -> BROMAX

Update to reflect NETGEAR_2 -> INTERSIL and INTERSIL -> INTERSIL2
changes to pccarddevs.

Add microsoft mn-520 wlan card.

Submitted by: Kirk Strauser

Add Linksys WCF12: from Scott Lambert

OpenBSD calls this AIRVAST, so use that instead

Add Siemens SpeedStream 1021

Obainted from: openbsd (in spirit); millert

Add support for asus wl100

PR: 49033/53249

Add corega PCCL-11 to match entry added to pccarddevs a while ago.

Noticed going into openbsd...

update for new 802.11 support

ARtem ONAIR card

Submitted by: Ben Gras

Call wi_free on the failure cases of pccard.

Tested by: scottl

Add generic OEM1 PRISM3 card.

Submitted by: mwlucas

- Express hard dependencies on bus (pci, isa, pccard) and
network layer (ether).
- Don't abuse module names to facilitate ifconfig module loading;
such abuse isn't really needed. (And if we do need type information
associated with a module then we should make it explicit and not
use hacks.)

Make sure that pp_name is non-null before setting the device
description. This allows us to rely entirely on the CIS entries if
necessary...

Back out the _ND change. I plan on making all drivers default to that with
a special _DESC version for those cards whose CIS is insufficient for some
reason. This should save about 3k of kernel strings when complete.

Use the new _ND macros to not include the description strings. If any
of the entries have a description, we'll use that to override the
description that the pccard layer generates for us.

This saves about 930 bytes in the module, so I feel it won't hurt the
crowded boot disks....

# other modules to follow

Don't set the decription, since the pccard layer does that for us now.
Remove the duplicate entries that were there to disambiguate different
cards that were the same, yet people wanted to have different dmesg.

Use __FBSDID rather than rcsid[].

Add DLINK DWL650H

From NetBSD by way of deischen

Add YIS YWL-11B. This card has same vendor id and product id
as XI300 Wireless LAN. So use PCMCIA_CARD2().

Add Allied Telesis WR211PCM.

new wi driver that uses the 802.11 link layer code

Reviewed by: imp
Obtained from: NetBSD (originally)

o Comment out the symbol download code for 4.x.
o Add hooks for doing power management of the output signal.
o Minor hacks to make flexlint happy wrt staticness of functions.

Some renamings from pccarddevs
Add Linksys WCF11
Bay eMobility 11B

Add Planex GWNS11H

Submitted by: hanai-san

Move the symbol firmware loading routines into if_wi.
Define some basic firmware downloading commands.

Add code that will download firmware to a Symbol LA4100-series of CF
cards. Since the firmware is hard coded into the kernel, I've made it
a kernel option (WI_SYMBOL_FIRMWARE).

Note: This only downloads into the RAM of these cards. It doesn't
download into FLASH, and is somewhat limited. There needs to be a
better way to deal, but this works for now. My Symbol LA4132 CF card
works now.

Obtained from: NetBSD

Add support for Elsa XI325, Netgear MA401RA, and Nokia C110. From OpenBSD
by various people there.

Make this driver compile for -stable also to prep for MFC

unifdef -DWI_HOSTAP, like OpenBSD does

Add ActionTec HWC01170 and Linksys IWN2

Obtained from: OpenBSD

Integrate the hostap stuff that Thomas Skibo <skibo@packbell.net>
wrote. This code was for 4.5-release, so I've ported it to -current
and made a few minor tweaks. The biggest non-style tweak was to not
make access point the default.

More changes will be needed to get this actually working, but I wanted
to get a relatively pure baseline. This doesn't seem to break what
works now.

The 3Com 3CRWE62092A (the XJack antenna product) does not have a host
interface that is compatible with the LUCENT or HERMES firmware.
Instead, it is like the various No Wires Necessary products that were
produced a while ago and then sold to intersil. It will require a
different driver altogether. Remove it from the list of supported
cards.

The 3CRWE777A apperas to be a re-badged SMC 2602W card, so the driver
appears to support it. Add it to the list.

Thanks to Todd Miller for loaning me the card during tonight's FRUUG
meeting for testing against CU's wireless infrastructure.

It would appear, from preliminary indications, that No Wires Necessary
cards aren't compatible with either Lucent or Intersil firmware.

Add some devices from OpenBSD/NetBSD:

o 3Com 3crwe62092a
o Addtron awp100
o No Wires Necessary WLAN 550 and 1148
o Proxim RANGELANDS 8340

and reorder linksys to be in proper sort order.

Obtained from: OpenBSD (mostly)

First cut at breaking out the bus attachment from the bus independent
part of the driver. Also, move the softc and some other stuff to
if_wivar.h from if_wireg.h to make future merging activities easier.