272461 |
03-Oct-2014 |
gjb |
Copy stable/10@r272459 to releng/10.1 as part of the 10.1-RELEASE process.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
269038 |
24-Jul-2014 |
jhb |
MFC 267883: Expand r261243 even further and ignore any I/O port resources assigned to PCI root bridges except for the one known-valid case on x86 where bridges claim the I/O port registers used for PCI config space access.
|
267983 |
27-Jun-2014 |
jhb |
MFC 267647: Trust the state of a power resource that we get from a working _STA method instead of trying to cache it.
|
265999 |
14-May-2014 |
ian |
MFC r257334, r257336, r257337, r257338, r257341, r257342, r257343, r257370, r257368, r257416
Hints-only devices should return BUS_PROBE_NOWILDCARD from their probe methods.
|
265655 |
08-May-2014 |
smh |
MFC r264849 & r264883
Exposed debug.acpi.max_tasks and debug.acpi.max_threads via sysctls so their values can be viewed.
Sponsored by: Multiplay
|
265653 |
08-May-2014 |
smh |
MFC r264878
Increase ACPI_MAX_TASKS to be 4 x the number of CPU's as 2 x was still insufficient on some machines
Sponsored by: Multiplay
|
263022 |
11-Mar-2014 |
jhb |
MFC 261243: Some BIOSes incorrectly use standard memory resource ranges to list the memory ranges that they decode for downstream devices rather than creating ResourceProducer range resource entries. The result is that we allocate the full range to the PCI root bridge device causing allocations in child devices to all fail.
As a workaround, ignore any standard memory resources on a PCI root bridge device. It is normal for a PCI root bridge to allocate an I/O resource for the I/O ports used for PCI config access, but I have not seen any PCI root bridges that legitimately allocate a memory resource.
|
261455 |
04-Feb-2014 |
eadler |
MFC r258779,r258780,r258787,r258822:
Fix undefined behavior: (1 << 31) is not defined as 1 is an int and this shifts into the sign bit. Instead use (1U << 31) which gets the expected result.
Similar to the (1 << 31) case it is not defined to do (2 << 30).
This fix is not ideal as it assumes a 32 bit int, but does fix the issue for most cases.
A similar change was made in OpenBSD.
|
260350 |
05-Jan-2014 |
mav |
MFC r258164: Handle case when ACPI reports HPET device, but does not provide memory resource for it. In such case take the address range from the HPET table.
This fixes hpet(4) driver attach on Asrock C2750D4I board.
|
259512 |
17-Dec-2013 |
kib |
MFC DMAR busdma implementation.
MFC r257251: Import the driver for VT-d DMAR hardware. Implement the busdma(9) using DMARs.
MFC r257512: Add support for queued invalidation.
MFC miscellaneous follow-ups to r257251.
MFC r257266: Remove redundand assignment to error variable and check for its value.
MFC r257308: Remove redundand declaration.
MFC r257511: Return BUS_PROBE_NOWILDCARD from the DMAR probe method.
MFC r257860,r257896,r257900,r257902,r257903 (by dim): Fixes for gcc compilation.
|
256281 |
10-Oct-2013 |
gjb |
Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
255726 |
20-Sep-2013 |
gibbs |
Add support for suspend/resume/migration operations when running as a Xen PVHVM guest.
Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D Reviewed by: gibbs Approved by: re (blanket Xen) MFC after: 2 weeks
sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: - Make sure that are no MMU related IPIs pending on migration. - Reset pending IPI_BITMAP on resume. - Init vcpu_info on resume.
sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: sys/x86/acpica/acpi_wakeup.c: sys/x86/x86/intr_machdep.c: sys/x86/isa/atpic.c: sys/x86/x86/io_apic.c: sys/x86/x86/local_apic.c: - Add a "suspend_cancelled" parameter to pic_resume(). For the Xen PIC, restoration of interrupt services differs between the aborted suspend and normal resume cases, so we must provide this information.
sys/dev/acpica/acpi_timer.c: sys/dev/xen/timer/timer.c: sys/timetc.h: - Don't swap out "suspend safe" timers across a suspend/resume cycle. This includes the Xen PV and ACPI timers.
sys/dev/xen/control/control.c: - Perform proper suspend/resume process for PVHVM: - Suspend all APs before going into suspension, this allows us to reset the vcpu_info on resume for each AP. - Reset shared info page and callback on resume.
sys/dev/xen/timer/timer.c: - Implement suspend/resume support for the PV timer. Since FreeBSD doesn't perform a per-cpu resume of the timer, we need to call smp_rendezvous in order to correctly resume the timer on each CPU.
sys/dev/xen/xenpci/xenpci.c: - Don't reset the PCI interrupt on each suspend/resume.
sys/kern/subr_smp.c: - When suspending a PVHVM domain make sure there are no MMU IPIs in-flight, or we will get a lockup on resume due to the fact that pending event channels are not carried over on migration. - Implement a generic version of restart_cpus that can be used by suspended and stopped cpus.
sys/x86/xen/hvm.c: - Implement resume support for the hypercall page and shared info. - Clear vcpu_info so it can be reset by APs when resuming from suspension.
sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/x86/xen/xen_intr.c: - Support UP kernel configurations.
sys/x86/xen/xen_intr.c: - Properly rebind per-cpus VIRQs and IPIs on resume.
|
255077 |
30-Aug-2013 |
dumbbell |
acpi_thermal: Warn about insane _TMP temperature only once
A warning is emitted again if the temperature became briefly valid meanwhile. This avoids spamming the user when the sensor is broken.
Other values (ie. not _TMP) always raise a warning.
|
254300 |
13-Aug-2013 |
jkim |
Tidy up global locks for ACPICA. There is no functional change.
|
253392 |
16-Jul-2013 |
jhb |
Workaround some broken BIOSes that specify edge-sensitive but active-low settings for ACPI-enumerated serial ports by forcing any IRQs that use an ISA IRQ value with these settings to active-high instead of active-low.
This is known to occur with the BIOS on an Intel D2500CCE motherboard.
Tested by: Robert Ames <robertames@hotmail.com>, lev Submitted by: Juergen Weiss weiss at uni-mainz.de (original patch)
|
252576 |
03-Jul-2013 |
jhb |
Don't perform the acpi_DeviceIsPresent() check for PCI-PCI bridges. If we are probing a PCI-PCI bridge it is because we found one by enumerating the devices on a PCI bus, so the bridge is definitely present. A few BIOSes report incorrect status (_STA) for some bridges that claimed they were not present when in fact they were.
While here, move this check earlier for Host-PCI bridges so attach fails before doing any work that needs to be torn down.
PR: kern/91594 Tested by: Jack Vogel @ Intel MFC after: 1 week
|
252276 |
27-Jun-2013 |
jkim |
Consistently cast ACPICA 64-bit integer types when we print them.
|
250838 |
20-May-2013 |
jkim |
Merge ACPICA 20130517.
|
250834 |
20-May-2013 |
jkim |
- Prefer ACPI_COMPARE_NAME(a, b) macro over strncmp(a, b, ACPI_NAME_SIZE). - Make sure the predefined name is a string type. - Return slightly more useful errors.
|
250833 |
20-May-2013 |
jkim |
Fix white spaces.
|
249767 |
22-Apr-2013 |
jhb |
- Some BIOSes use an Extended IRQ resource descriptor in _PRS for a link that uses non-ISA IRQs but use a plain IRQ resource in _CRS. However, a non-ISA IRQ can't fit into a plain IRQ resource. If we encounter a link like this, build the resource buffer from _PRS instead of _CRS. - Set the correct size of the end tag in a resource buffer.
Tested by: Benjamin Lee <ben@b1c1l1.com> MFC after: 2 weeks
|
248415 |
17-Mar-2013 |
rpaulo |
Fix a typo in a comment.
|
248170 |
11-Mar-2013 |
mav |
Add "else" missed at r248154.
|
248154 |
11-Mar-2013 |
mav |
Reduce HPET eventtimer priority on systems with 8 or more cores. Price of the lock congestion may be too high there (2.5% on 4x4 core AMD Opteron).
|
247463 |
28-Feb-2013 |
mav |
MFcalloutng: Switch eventtimers(9) from using struct bintime to sbintime_t. Even before this not a single driver really supported full dynamic range of struct bintime even in theory, not speaking about practical inexpediency. This change legitimates the status quo and cleans up the code.
|
247460 |
28-Feb-2013 |
davide |
MFcalloutng (r247427 by mav): We don't need any precision here. Let it be fast and dirty shift then slow and excessively precise 64-bit division.
|
247454 |
28-Feb-2013 |
davide |
MFcalloutng: When CPU becomes idle, cpu_idleclock() calculates time to the next timer event in order to reprogram hw timer. Return that time in sbintime_t to the caller and pass it to acpi_cpu_idle(), where it can be used as one more factor (quite precise) to extimate furter sleep time and choose optimal sleep state. This is a preparatory change for further callout improvements will be committed in the next days.
The commmit is not targeted for MFC.
|
246252 |
02-Feb-2013 |
avg |
revert accidentally committed unneeded changes from r246250
MFC after: 7 days X-MFC with: r246250
|
246251 |
02-Feb-2013 |
avg |
acpi: clear power button status bit after waking up...
so that it is not confused for a new power off request.
Learned from: Linux and ACPI specification Tested by: gjb MFC after: 12 days
|
246250 |
02-Feb-2013 |
avg |
acpi: after wakeup from a state > S1 re-enable SCI_EN with a direct write
This hack is picked up from Linux, which claims that it follows Windows behavior.
PR: amd64/174409 Tested by: Sergey V. Dyatko <sergey.dyatko@gmail.com>, KAHO Toshikazu <kaho@elam.kais.kyoto-u.ac.jp>, Slawa Olhovchenkov <slw@zxy.spb.ru> MFC after: 13 days
|
246128 |
30-Jan-2013 |
sbz |
Use DEVMETHOD_END macro defined in sys/bus.h instead of {0, 0} sentinel on device_method_t arrays
Reviewed by: cognet Approved by: cognet
|
246042 |
28-Jan-2013 |
jkim |
Fix two misusages of return_*() macros for ACPICA.
Noticed by: avg
|
246041 |
28-Jan-2013 |
jkim |
Fix white spaces for style consistency.
|
245582 |
18-Jan-2013 |
jkim |
Merge ACPICA 20130117.
|
245266 |
10-Jan-2013 |
mav |
Remove not very useful printf, that can be too chatty.
ASUS P8Z77-V board reports _AC2, _AC3 and _AC4 setpoints as 0C. With active cooling already automatically set to _AC2, that still caused driver to print two useless lines about temperature above _AC3 and _AC4 every ten seconds. Three setponts of 0C is probably a board bug, but the same spam could happen also in correct case if system is runnign not with the lowest cooling level.
|
243761 |
01-Dec-2012 |
avg |
acpi_cpu_notify: disable acpi_cpu_idle while updating C-state data
... to avoid any races or inconsistencies. This should fix a regression introduced in r243404.
Also, remove a stale comment that has not been true for quite a while now.
Pointyhat to: avg Teested by: trociny, emaste, dumbbell (earlier version) MFC after: 1 week
|
243760 |
01-Dec-2012 |
avg |
acpi_cpu: change cpu_disable_idle to be a per-cpu flag...
and make it safe to manipulate and check the flag
With help from: jhb Tested by: trociny, emaste, dumbbell MFC after: 1 week
|
243404 |
22-Nov-2012 |
avg |
acpi_cpu: use fixed resource ids for cx state i/o resources
... instead of the ever increasing ones. Also, do free old resources when allocating new ones when cx states change.
Tested by: Tom Lislegaard <Tom.Lislegaard@proact.no> Obtained from: jkim MFC after: 1 week
|
242922 |
12-Nov-2012 |
sbruno |
Update MAX_TASKS to scale a bit based on MAXCPU
This alleviates issues on newer Sandy/Ivy Bridge gear that seems to require boatloads more ACPI resources than before.
Reviewed by: avg@ Obtained from: Yahoo! Inc. MFC after: 2 weeks
|
241973 |
23-Oct-2012 |
jkim |
Merge ACPICA 20121018.
|
241885 |
22-Oct-2012 |
eadler |
This isn't functionally identical. In some cases a hint to disable unit 0 would in fact disable all units.
This reverts r241856
Approved by: cperciva (implicit)
|
241856 |
22-Oct-2012 |
eadler |
Now that device disabling is generic, remove extraneous code from the device drivers that used to provide this feature.
Reviewed by: des Approved by: cperciva MFC after: 1 week
|
241748 |
19-Oct-2012 |
jhb |
When checking to see if a video output's _ADR matches an entry in the parent adapter's _DOD list, only check the low 16 bits of both _ADR and _DOD. The language in the ACPI spec seems to indicate that the _ADR values should exactly match the entries in _DOD. However, I assume that the masking added to _DOD values was added to work around some known busted machines (the commit history doesn't indicate either way), and the ACPI spec does require that the low 16 bits are unique for all video outputs, so only check the low 16 bits should be fine.
This fixes recognition of video outputs that use the new standardized device ID scheme in ACPI 3.0 that set bit 31 such as certain Dell laptops.
Tested by: Juergen Lock nox jelal kn-bremen de MFC after: 3 days
|
241538 |
14-Oct-2012 |
avg |
acpi_thermal: when _ACx is tripped, all _ALi i>= x should be on
... and not just _ALx as it is now.
MFC after: 20 days
|
241386 |
10-Oct-2012 |
neel |
Grab the softc from the ACPI host-pci bridge device instead of from the pci endpoint device.
Reviewed by: jhb
|
240634 |
18-Sep-2012 |
avg |
acpi_cpu: explicitly notify userland about c-state changes
... after they are committed. A notification is sent per CPU.
Reviewed by: imp MFC after: 3 weeks
|
240367 |
11-Sep-2012 |
avg |
revert r240344: cpu_devices[] is used in other functions and must be kept
Reported by: gjb, glebius Pointyhat to: avg MFC after: 1 day X-MFC note: fake MFC, reminder to never MFC r240344
|
240344 |
11-Sep-2012 |
avg |
acpi_cpu: free result of device_get_children
MFC after: 1 week
|
240286 |
09-Sep-2012 |
mav |
At least from A70M FCH chipsets AMD started to use their real vendor ID (1022) in HPET. But according to report they still haven't fixed problem with level-triggered interrupts. Make workaround used for earlier chipsets apply to this new ID also.
PR: amd64/171355 MFC after: 3 days
|
239340 |
16-Aug-2012 |
jkim |
Merge ACPICA 20120816.
|
238943 |
31-Jul-2012 |
mav |
Add several performance optimizations to acpi_cpu_idle().
For C1 and C2 states use cpu_ticks() to measure sleep time instead of much slower ACPI timer. We can't do it for C3, as TSC may stop there. But it is less important there as wake up latency is high any way.
For C1 and C2 states do not check/clear bus mastering activity status, as it is important only for C3. As side effect it can make CPU enter C2 instead of C3 if last BM activity was two sleeps back (unlike one before), but that may be even good because of collecting more statistics. Premature BM wakeup from C3, entered because of overestimation, can easily be worse then entering C2 from both performance and power consumption points of view.
Together on dual Xeon E5645 system on sequential 512 bytes read test this change makes cpu_idle_acpi() as fast as simplest cpu_idle_hlt() and only few percents slower then cpu_idle_mwait(), while deeper states are still actively used during idle periods.
To help with diagnostics, add C-state type into dev.cpu.X.cx_supported.
Sponsored by: iXsystems, Inc.
|
238418 |
13-Jul-2012 |
avg |
acpi_cpu: separate a notion of current deepest allowed+available Cx level
... from a user-set persistent limit on the said level. Allow to set the user-imposed limit below current deepest available level as the available levels may be dynamically changed by ACPI platform in both directions. Allow "Cmax" as an input value for cx_lowest sysctls to mean that there is not limit and OS can use all available C-states. Retire global cpu_cx_count as it no longer serves any meaningful purpose.
Reviewed by: jhb, gianni, sbruno Tested by: sbruno, Vitaly Magerya <vmagerya@gmail.com> MFC after: 2 weeks
|
238229 |
08-Jul-2012 |
avg |
acpi_cpu: we are able to handle _CST change notifications...
so un-ifdef code that is supposed to tell ACPI platform about that
Tested by: Taku YAMAMOTO <taku@tackymt.homeip.net> MFC after: 2 weeks
|
238199 |
07-Jul-2012 |
eadler |
Remove variables which are initialized but never used thereafter reported by gcc46 warning
Approved by: cperciva MFC after: 1 week
|
238194 |
07-Jul-2012 |
avg |
acpi_cpu_generic_cx_probe: for consistency set cpu_non_c3 here too
although by default only C1 is enabled (cx_lowest=0) and enabling deeper states goes through acpi_cpu_set_cx_lowest which re-evaluates cpu_non_c3
MFC after: 2 weeks
|
238193 |
07-Jul-2012 |
avg |
acpi_cpu_cx_list: there is no need to re-evaluate cpu_non_c3 here
cpu_non_c3 is already evaluated in acpi_cpu_cx_cst and in acpi_cpu_set_cx_lowest. Besides acpi_cpu_cx_list is not protected by any locking.
As a result also move setting of cpu_can_deep_sleep to more appropriate places.
MFC after: 2 weeks
|
238192 |
07-Jul-2012 |
avg |
acpi_cpu_cx_cst: consistently use cpu_cx_count during state enumeration
cpu_cx_count is an index into accepted states, while i is an index into original _CST states
MFC after: 1 week
|
238009 |
02-Jul-2012 |
sbruno |
Revert r238004 as more review has come in and there is now a discussion on how to best proceed.
|
238004 |
02-Jul-2012 |
sbruno |
Cosmetic display change of Cx states via cx_supported sysctl entries.
Adjust power_profile script to handle the new world order as well.
Some vendors are opting out of a C2 state and only defining C1 & C3. This leads the acpi_cpu display to indicate that the machine supports C1 & C2 which is caused by the (mis)use of the index of the cx_state array as the ACPI_STATE_CX value.
e.g. the code was pretending that cx_state[i] would always convert to i by subtracting 1.
cx_state[2] == ACPI_STATE_C3 cx_state[1] == ACPI_STATE_C2 cx_state[0] == ACPI_STATE_C1
however, on certain machines this would lead to cx_state[1] == ACPI_STATE_C3 cx_state[0] == ACPI_STATE_C1
This didn't break anything but led to a display of: * dev.cpu.0.cx_supported: C1/1 C2/96
Instead of * dev.cpu.0.cx_supported: C1/1 C3/96
MFC after: 2 weeks
|
237197 |
17-Jun-2012 |
iwasaki |
Resotre LCD brightness level on resuming.
MFC after: 3 days
|
236772 |
09-Jun-2012 |
iwasaki |
Add x86/acpica/acpi_wakeup.c for amd64 and i386. Difference of suspend/resume procedures are minimized among them.
common: - Add global cpuset suspended_cpus to indicate APs are suspended/resumed. - Remove acpi_waketag and acpi_wakemap from acpivar.h (no longer used). - Add some variables in acpi_wakecode.S in order to minimize the difference among amd64 and i386. - Disable load_cr3() because now CR3 is restored in resumectx().
amd64: - Add suspend/resume related members (such as MSR) in PCB. - Modify savectx() for above new PCB members. - Merge acpi_switch.S into cpu_switch.S as resumectx().
i386: - Merge(and remove) suspendctx() into savectx() in order to match with amd64 code.
Reviewed by: attilio@, acpi@
|
236424 |
01-Jun-2012 |
jkim |
Consistently use ACPI_SUCCESS() and ACPI_FAILURE() macros wherever possible.
|
236408 |
01-Jun-2012 |
jkim |
Execute AcpiLeaveSleepStatePrep() for S1 and reduce code duplication.
MFC after: 3 days
|
236403 |
01-Jun-2012 |
iwasaki |
Call AcpiLeaveSleepStatePrep() in interrupt disabled context (described in ACPICA source code).
- Move intr_disable() and intr_restore() from acpi_wakeup.c to acpi.c and call AcpiLeaveSleepStatePrep() in interrupt disabled context. - Add acpi_wakeup_machdep() to execute wakeup MD procedures and call it twice in interrupt disabled/enabled context (ia64 version is just dummy). - Rename wakeup_cpus variable in acpi_sleep_machdep() to suspcpus in order to be shared by acpi_sleep_machdep() and acpi_wakeup_machdep(). - Move identity mapping related code to acpi_install_wakeup_handler() (i386 version) for preparation of x86/acpica/acpi_wakeup.c (MFC candidate).
Reviewed by: jkim@ MFC after: 2 days
|
236221 |
29-May-2012 |
iwasaki |
Reorder resume procedures.
DEVICE_RESUME() should be done before AcpiLeaveSleepState() because PCI config space evaluation can be occurred during control method executions.
This should fix one of the hang up problems on resuming.
MFC after: 3 days
|
236220 |
29-May-2012 |
iwasaki |
Fix the problem acpi_sleep_force() hang.
Suspending from callout cause the freeze in DEVICE_SUSPEND(). Suspend from acpi_task thread in stead.
MFC after: 3 days
|
235945 |
24-May-2012 |
jkim |
Merge ACPICA 20120518.
|
235845 |
23-May-2012 |
jkim |
Restore Processor object path for verbose boot message.
|
235834 |
23-May-2012 |
jhb |
Rework the previous change to honor MADT processor IDs when probing processor objects. Instead of forcing the new-bus CPU objects to use a unit number equal to pc_cpuid, adjust acpi_pcpu_get_id() to honor the MADT IDs by default. As with the previous change, setting debug.acpi.cpu_unordered to 1 in the loader will revert to the old behavior.
Tested by: jimharris MFC after: 1 month
|
235772 |
22-May-2012 |
iwasaki |
Ignore the power button press event for resuming rather than starting shutdown.
MFC after: 2 days
|
235692 |
20-May-2012 |
iwasaki |
Don't start the sleep state transition procedure while sleep is disabled or the system is in shutdown procedure.
This should fix the problem which kernel never response to the sleep button press events after the message `suspend request ignored (not ready yet)'.
MFC after: 3 days
|
235556 |
17-May-2012 |
jhb |
Centralize declaration of the debug.acpi sysctl node.
|
235029 |
04-May-2012 |
jkim |
Complete commit message for r235024:
Use MADT to match ACPI Processor objects to CPUs. MADT and DSDT/SSDTs may list CPUs in different orders, especially for disabled logical cores. Now we match ACPI IDs from the MADT with Processor objects, strictly order CPUs accordingly, and ignore disabled cores. This prevents us from executing methods for other CPUs, e. g., _PSS for disabled logical core, which may not exist. Unfortunately, it is known that there are a few systems with buggy BIOSes that do not have unique ACPI IDs for MADT and Processor objects. To work around these problems, 'debug.acpi.cpu_unordered' tunable is added. Set this to a non-zero value to restore the old behavior. Many thanks to jhb for pointing me to the right direction and the manual page change.
Reported by: Harris, James R (james dot r dot harris at intel dot com) Tested by: Harris, James R (james dot r dot harris at intel dot com) Reviewed by: jhb MFC after: 1 month
|
235024 |
04-May-2012 |
jkim |
Use MADT to match ACPI Processor objects to CPUs. MADT and DSDT/SSDTs may list CPUs in different orders, especially for disabled logical cores. Now we match ACPI IDs from the MADT with Processor objects, strictly order CPUs accordingly, and ignore disabled cores. This prevents us from executing methods for other CPUs, e. g., _PSS for disabled logical core, which may not exist. Unfortunately, it is known that there are a few systems with buggy BIOSes that do not have unique ACPI IDs for MADT and Processor objects. To work around these problems
|
233676 |
29-Mar-2012 |
jhb |
Use a more proper fix for enabling HT MSI mapping windows on Host-PCI bridges. Rather than blindly enabling the windows on all of them, only enable the window when an MSI interrupt is enabled for a device behind the bridge, similar to what already happens for HT PCI-PCI bridges.
To implement this, each x86 Host-PCI bridge driver has to be able to locate it's actual backing device on bus 0. For ACPI, use the _ADR method to find the slot and function of the device. For the non-ACPI case, the legacy(4) driver already scans bus 0 looking for Host-PCI bridge devices. Now it saves the slot and function of each bridge that it finds as ivars that the Host-PCI bridge driver can then use in its pcib_map_msi() method.
This fixes machines where non-MSI interrupts were broken by the previous round of HT MSI changes.
Tested by: bapt MFC after: 1 week
|
233579 |
27-Mar-2012 |
jkim |
Restore interrupt state after executing AcpiEnterSleepState().
|
233313 |
22-Mar-2012 |
jkim |
Add ACPI_LV_REPAIR debug level, available since ACPICA 20091214 (r200553).
MFC after: 3 days
|
233250 |
20-Mar-2012 |
jkim |
Merge ACPICA 20120320.
|
232797 |
10-Mar-2012 |
mav |
ServerWorks HT1000 HPET reported to have problems with IRQs >= 16. Lower (ISA) IRQs are working, but allowed mask is not set correctly. Block both by default to allow HP BL465c G6 blade system to boot.
Reported by: Attila Nagy <bra@fsn.hu> MFC after: 1 week
|
232403 |
02-Mar-2012 |
jhb |
- Add a bus_dma tag to each PCI bus that is a child of a Host-PCI bridge. The tag enforces a single restriction that all DMA transactions must not cross a 4GB boundary. Note that while this restriction technically only applies to PCI-express, this change applies it to all PCI devices as it is simpler to implement that way and errs on the side of caution. - Add a softc structure for PCI bus devices to hold the bus_dma tag and a new pci_attach_common() routine that performs actions common to the attach phase of all PCI bus drivers. Right now this only consists of a bootverbose printf and the allocate of a bus_dma tag if necessary. - Adjust all PCI bus drivers to allocate a PCI bus softc and to call pci_attach_common() from their attach routines.
MFC after: 2 weeks
|
232132 |
24-Feb-2012 |
jkim |
Fix a long-standing bug for AcpiOsGetTimer(). time_t is 32-bit on i386 and it needs proper casting before multiplication.
MFC after: 3 days
|
231844 |
16-Feb-2012 |
jkim |
Merge ACPICA 20120215.
|
231474 |
10-Feb-2012 |
jkim |
De-obfuscate acpi_acquire_global_lock(). It seems the function was directly translated from i386 assembly version.
|
231295 |
09-Feb-2012 |
jkim |
Refine r231226. Swap timecounters before suspending any device drivers.
|
231227 |
08-Feb-2012 |
jkim |
Reset clock after atrtc(4) is properly resumed.
|
231226 |
08-Feb-2012 |
jkim |
Revert r211288 and move the logic to the acpi_timer itself.
|
231161 |
07-Feb-2012 |
jkim |
- Give all clocks and timers on acpi0 the equal probing order. - Increase probing order for ECDT table to match HID-based probing. - Decrease probing order for HPET table to match HID-based probing. - Decrease probing order for CPUs and system resources. - Fix ACPI_DEV_BASE_ORDER to reflect the reality.
|
228961 |
29-Dec-2011 |
jhb |
Further relax the strictness of enforcing allocations to only come from decoded ranges. Pass any request for a specific range that fails because it is not in a decoded range for an ACPI Host-PCI bridge up to the parent to see if it can still be allocated. This is based on the assumption that many BIOSes are inconsistent/broken and that settings programmed into BARs or resources assigned to other built-in components are more trustworthy than the list of decoded resource ranges in _CRS. This effectively limits the decoded ranges to only being used for "wildcard" ranges when allocating fresh resources for a BAR, etc. At some point I would like to only be this permissive during an early scan of firmware-assigned resources during boot and to be strict about all later allocations, but that isn't viable currently.
MFC after: 2 weeks
|
227992 |
26-Nov-2011 |
dumbbell |
Prevent a division by zero with some broken batteries
This problem was seen on a laptop with a dead battery.
|
227843 |
22-Nov-2011 |
marius |
- There's no need to overwrite the default device method with the default one. Interestingly, these are actually the default for quite some time (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9) since r52045) but even recently added device drivers do this unnecessarily. Discussed with: jhb, marcel - While at it, use DEVMETHOD_END. Discussed with: jhb - Also while at it, use __FBSDID.
|
227642 |
17-Nov-2011 |
eadler |
- be more precise about the unit of measurement
Approved by: jhb MFC after: 3 days
|
227626 |
17-Nov-2011 |
eadler |
- be more precise about the unit of measurement
Submitted by: Oliver Pinter <oliver.pntr@gmail.com> Approved by: jhb MFC after: 3 days
|
227309 |
07-Nov-2011 |
ed |
Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of that node. If there's no SYSCTL_DECL macro anywhere else, there's no reason why it shouldn't be static.
|
227293 |
07-Nov-2011 |
ed |
Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
|
226302 |
12-Oct-2011 |
jhb |
If an allocation for a specific resource range fails because it is not in a decoded range for an ACPI Host-PCI bridge, try to allocate it from the ACPI system resource range. If that works, permit the resource allocation regardless.
MFC after: 1 week
|
225533 |
13-Sep-2011 |
brueffer |
Improve the sleep_delay sysctl description by specifying which unit the number is in.
PR: 159975 Submitted by: gcooper Approved by: re (kib) MFC after: 1 week
|
224919 |
16-Aug-2011 |
mav |
Always check current HPET counter value after comparator programming to avoid lost timer interrupts. Previous optimization attempt doing it only for intervals less then 5000 ticks (~300us) reported to be unreliable by some people. Probably because of some heavy SMI code on their boards. Introduce additional safety interval of 128 counter ticks (~9us) between programmed comparator and counter values to cover different cases of delayed write found on some chipsets.
Approved by: re (kib)
|
224254 |
21-Jul-2011 |
jhb |
Allow non-fixed endpoints for a producer address range if the length of the resource covers the entire range. Some BIOSes appear to mark endpoints as non-fixed incorrectly (non-fixed endpoints are supposed to be used in _PRS when OSPM is allowed to allocate a certain chunk of address space within a larger range, I don't believe it is supposed to be used for _CRS).
Approved by: re (kib)
|
224130 |
17-Jul-2011 |
jhb |
Don't ignore negatively decoded address ranges.
Reported by: scottl
|
224069 |
15-Jul-2011 |
jhb |
Respect the BIOS/firmware's notion of acceptable address ranges for PCI resource allocation on x86 platforms: - Add a new helper API that Host-PCI bridge drivers can use to restrict resource allocation requests to a set of address ranges for different resource types. - For the ACPI Host-PCI bridge driver, use Producer address range resources in _CRS to enumerate valid address ranges for a given Host-PCI bridge. This can be disabled by including "hostres" in the debug.acpi.disabled tunable. - For the MPTable Host-PCI bridge driver, use entries in the extended MPTable to determine the valid address ranges for a given Host-PCI bridge. This required adding code to parse extended table entries.
Similar to the new PCI-PCI bridge driver, these changes are only enabled if the NEW_PCIB kernel option is enabled (which is enabled by default on amd64 and i386).
Approved by: re (kib)
|
223624 |
28-Jun-2011 |
kevlo |
Remove duplicate header includes
|
223527 |
25-Jun-2011 |
marcel |
Now that ia64 has been switched to the event timers, remove the conditional compilation work-arounds.
|
223502 |
24-Jun-2011 |
jhb |
Typo.
|
223449 |
22-Jun-2011 |
jkim |
Fix build on ia64 after r223426.
|
223426 |
22-Jun-2011 |
jkim |
Set negative quality to TSC timecounter when C3 state is enabled for Intel processors unless the invariant TSC bit of CPUID is set. Intel processors may stop incrementing TSC when DPSLP# pin is asserted, according to Intel processor manuals, i. e., TSC timecounter is useless if the processor can enter deep sleep state (C3/C4). This problem was accidentally uncovered by r222869, which increased timecounter quality of P-state invariant TSC, e.g., for Core2 Duo T5870 (Family 6, Model f) and Atom N270 (Family 6, Model 1c).
Reported by: Fabian Keil (freebsd-listen at fabiankeil dot de) Ian FREISLICH (ianf at clue dot co dot za) Tested by: Fabian Keil (freebsd-listen at fabiankeil dot de) - Core2 Duo T5870 (C3 state available/enabled) jkim - Xeon X5150 (C3 state unavailable)
|
223424 |
22-Jun-2011 |
jhb |
Add a helper routine to conditionally modify the start address of a resource allocation from an x86 Host-PCI bridge driver so that it can be reused by the ACPI Host-PCI bridge driver (and eventually the MPTable Host-PCI bridge driver) instead of duplicating the same logic. Note that this means that hw.acpi.host_mem_start is now replaced with the hw.pci.host_mem_start tunable that was already used in the non-ACPI case. This also removes hw.acpi.host_mem_start on ia64 where it was not applicable (the implementation was very x86-specific).
While here, adjust the logic to apply the new start address on any "wildcard" allocation even if that allocation comes from a subset of the allowable address range.
Reviewed by: imp (1)
|
223383 |
21-Jun-2011 |
jhb |
Fix build with ACPI_DEBUG defined.
Submitted by: jkim Pointy hat to: jhb
|
223370 |
21-Jun-2011 |
jhb |
Use AcpiWalkResources() to parse the resource list from _CRS rather than using a home-rolled loop. While here, add support for 64-bit address range resources.
Silence on: acpi@ (older version)
|
223207 |
17-Jun-2011 |
jhb |
Don't create a device_t object or parse current resources (via _CRS) for ACPI Device() objects that do not have any device IDs available via the _HID or _CID methods. Without a device ID a device driver cannot attach to the device anyway. Namespace objects that are devices but not of type ACPI_TYPE_DEVICE are not affected.
A few BIOSes have also attached a _CRS method to a PCI device to allocate resources that are not managed via a BAR. With the previous code those resources are allocated from acpi0 directly which can interfere with the new PCI-PCI bridge driver (since the PCI device in question may be behind a bridge and its resources should be allocated from that bridge's windows instead). The resources were also orphaned and and would end up associated with some other random device whose device_t reused the pointer of the original ACPI-enumerated device (after it was free'd by the ACPI PCI bus driver) in devinfo output which was confusing. If we want to handle _CRS on PCI devices we can adjust the ACPI PCI bus driver to do that in the future and associate the resources with the proper device object respecting PCI-PCI bridges, etc.
Note that with this change the ACPI PCI bus driver no longer has to delete ACPI-enumerated device_t devices that mirror PCI devices since they should in general not exist. There are rare cases when a BIOS will give a PCI device a _HID (e.g. I've seen a PCI-ISA bridge given a _HID for a system resource device). In that case we leave both the ACPI and PCI-enumerated device_t objects around just as in the previous code.
|
222929 |
10-Jun-2011 |
jhb |
Implement BUS_ADJUST_RESOURCE() for the x86 drivers that sit between the Host-PCI bridge drivers and nexus.
|
222544 |
31-May-2011 |
jkim |
Merge ACPICA 20110527.
|
222222 |
23-May-2011 |
jkim |
Decrease ACPI-fast timecounter quality to 900 and increase HPET timecounter quality to 950. HPET on modern platforms usually have better resolution and lower latency than ACPI timer. Effectively this changes default timecounter hardware from ACPI-fast to HPET by default when both are available.
Discussed with: avg
|
221393 |
03-May-2011 |
jhb |
Reimplement how PCI-PCI bridges manage their I/O windows. Previously the driver would verify that requests for child devices were confined to any existing I/O windows, but the driver relied on the firmware to initialize the windows and would never grow the windows for new requests. Now the driver actively manages the I/O windows.
This is implemented by allocating a bus resource for each I/O window from the parent PCI bus and suballocating that resource to child devices. The suballocations are managed by creating an rman for each I/O window. The suballocated resources are mapped by passing the bus_activate_resource() call up to the parent PCI bus. Windows are grown when needed by using bus_adjust_resource() to adjust the resource allocated from the parent PCI bus. If the adjust request succeeds, the window is adjusted and the suballocation request for the child device is retried.
When growing a window, the rman_first_free_region() and rman_last_free_region() routines are used to determine if the front or end of the existing I/O window is free. From using that, the smallest ranges that need to be added to either the front or back of the window are computed. The driver will first try to grow the window in whichever direction requires the smallest growth first followed by the other direction if that fails.
Subtractive bridges will first attempt to satisfy requests for child resources from I/O windows (including attempts to grow the windows). If that fails, the request is passed up to the parent PCI bus directly however.
The PCI-PCI bridge driver will try to use firmware-assigned ranges for child BARs first and only allocate a "fresh" range if that specific range cannot be accommodated in the I/O window. This allows systems where the firmware assigns resources during boot but later wipes the I/O windows (some ACPI BIOSen are known to do this) to "rediscover" the original I/O window ranges.
The ACPI Host-PCI bridge driver has been adjusted to correctly honor hw.acpi.host_mem_start and the I/O port equivalent when a PCI-PCI bridge makes a wildcard request for an I/O window range.
The new PCI-PCI bridge driver is only enabled if the NEW_PCIB kernel option is enabled. This is a transition aide to allow platforms that do not yet support bus_activate_resource() and bus_adjust_resource() in their Host-PCI bridge drivers (and possibly other drivers as needed) to use the old driver for now. Once all platforms support the new driver, the kernel option and old driver will be removed.
PR: kern/143874 kern/149306 Tested by: mav
|
221336 |
02-May-2011 |
jhb |
The ACPI Host-PCI bridge driver actually supports multiple domains via the optional _SEG function. Return that value (ap->segment) rather than 0 for the pcib domain ivar.
|
221324 |
02-May-2011 |
jhb |
Add implementations of BUS_ADJUST_RESOURCE() to the PCI bus driver, generic PCI-PCI bridge driver, x86 nexus driver, and x86 Host to PCI bridge drivers.
|
220871 |
19-Apr-2011 |
mdf |
Correctly output the entire array for hw.acpi.thermal._ACx.
Reported by: Taku YAMAMOTO < taku AT tackymt DOT homeip DOT net > Tested by: Nick Ulen < uncle AT wolfman DOT devio DOT us >
|
220805 |
18-Apr-2011 |
jkim |
Do not assume PM timer GAS type is I/O or memory. It may be an unsupported type, i. e., a broken table. Also, do not hardcode ACPI timer frequency in device description.
|
220798 |
18-Apr-2011 |
mdf |
Fix a few acpi sysctls that want "IK" formatting to specify CTLTYPE_INT. This got broken after r217586.
Pointy hat: to me Tested by: David Wolfskill < davit AT catwhisker DOT org >
|
220647 |
14-Apr-2011 |
jkim |
Add event handlers for (ACPI) suspend/resume events. Suspend event handlers are invoked right before device drivers go into sleep state and resume event handlers are invoked right after all device drivers are waken up.
|
220613 |
14-Apr-2011 |
jkim |
Add some tunable descriptions about x86 timers.
Requested by: arundel
|
220433 |
07-Apr-2011 |
jkim |
Use atomic load & store for TSC frequency. It may be overkill for amd64 but safer for i386 because it can be easily over 4 GHz now. More worse, it can be easily changed by user with 'machdep.tsc_freq' tunable (directly) or cpufreq(4) (indirectly). Note it is intentionally not used in performance critical paths to avoid performance regression (but we should, in theory). Alternatively, we may add "virtual TSC" with lower frequency if maximum frequency overflows 32 bits (and ignore possible incoherency as we do now).
|
220369 |
05-Apr-2011 |
jkim |
Lower the bar for ACPI-fast on real machines slightly. Empirical evidences show that there are perfectly working PM timers with occasional "hiccups", probably because of an SMI. Now we ignore the maximum if it happens once in the test loop and the width is small enough. Also, relax normal width a bit to count in a boundary case.
|
220338 |
04-Apr-2011 |
jkim |
Move a trivial acpi_TimerDelta() to acpivar.h to make it inlineable.
|
220336 |
04-Apr-2011 |
jkim |
Always check the current minimum value to make the test more predictable. Use INT32_MAX instead of an arbitrary big number for the initial minimum.
|
220334 |
04-Apr-2011 |
jkim |
Fix bogus logic to calculate delta between two values from ACPI timers.
|
220333 |
04-Apr-2011 |
jkim |
Lower the bar for ACPI-fast on virtual machines. The current logic depends on the fact that real hardware has almost fixed cost to read the ACPI timer. It is virtually always false for hardware emulation and it makes no sense to read it multiple times, which is already quite expensive for full emulation.
|
220331 |
04-Apr-2011 |
jkim |
Add inline to acpi_timer_read() to reduce unnecessary jumps and calls.
|
219037 |
25-Feb-2011 |
jkim |
Add more definitions for vendor-specific CPU capability bits to the last revision, which is renamed to "Intel Processor Vendor-Specific ACPI".
|
218687 |
14-Feb-2011 |
jkim |
Rework r218685. Copy just enough data for the resource type.
Reviewed by: jhb, mdf
|
218685 |
14-Feb-2011 |
mdf |
Prevent reading from the ACPI_RESOURCE past its actual end. For paranoia limit to the size of the ACPI_RESOURCE as well.
Reviewd by: jhb (in spirit) MFC after: 1 week
|
218660 |
13-Feb-2011 |
marcel |
Use the preload_fetch_addr() and preload_fetch_size() convenience functions to obtain the address and size of the overriding DSDT.
Sponsored by: Juniper Networks.
|
217566 |
19-Jan-2011 |
mdf |
Fix a few more SYSCTL_PROC() that were missing a CTLFLAG type specifier.
|
217537 |
18-Jan-2011 |
jhb |
Remove bogus check. pcib_get_bus() (like other BUS_ACCESSOR() methods) doesn't "fail", it may merely return garbage if it is not a valid ivar for a given device. Our parent device must be a 'pcib' device, so we can just assume it implements pcib IVARs, and all pcib devices have a bus number.
Submitted by: clang via rdivacky
|
217279 |
11-Jan-2011 |
jkim |
Work around a witness(4) panic introduced in r217238.
Reported by: jh
|
217278 |
11-Jan-2011 |
jkim |
Fix a witness(4) warning introduced in r217238.
|
217241 |
10-Jan-2011 |
jkim |
Remove impossible error conditions.
|
217240 |
10-Jan-2011 |
jkim |
Add forgotten free(9) in the previous commit for an error case.
|
217238 |
10-Jan-2011 |
jkim |
Allow AcpiOsInstallInterruptHandler() and AcpiOsRemoveInterruptHandler() to install or remove non-SCI interrupt handlers per ACPI Component Architecture User Guide and Programmer Reference. ACPICA may install such interrupt handler when a GPE block device is found, for example. Add a wrapper for ACPI_OSD_HANDLER, convert its return values to ours, and make it a filter. Prefer KASSERT(9) over panic(9) as we have never seen those in reality. Clean up some style(9) nits and add my copyright.
|
217236 |
10-Jan-2011 |
jkim |
Prefer KASSERT(9) over panic(9) as it was never seen in reality.
|
216965 |
04-Jan-2011 |
jkim |
Clarify the previous commit. AcpiFinishGpe() will not clear GPE for us because we set it to edge-trigger.
|
216942 |
04-Jan-2011 |
jkim |
Clear GPE from a query handler if the task was deferred.
|
216940 |
03-Jan-2011 |
jkim |
Fix parameters for wakeup(9) and tsleep(9).
MFC after: 3 days
|
216680 |
23-Dec-2010 |
jhb |
Don't try to reserve a resource that is already allocated. If the ECDT table is present, then the acpi_ec(4) driver will allocate its resources from nexus0 before the acpi0 device reserves resources for child devices.
Reviewed by: jkim
|
216674 |
22-Dec-2010 |
jhb |
Use resource_list_reserve() to reserve I/O port and memory resources for ACPI devices even if they are not allocated by a device driver since the resources are in use and should not be allocated to another device.
|
216503 |
17-Dec-2010 |
avg |
small cleanup of acpi battery status setting and checking
This is based on the patch submitted by Yuri Skripachov. Overview of the changes: - clarify double-use of some ACPI_BATT_STAT_* definitions - clean up undefined/extended status bits returned by _BST - warn about charging+discharging bits being set at the same time
PR: kern/124744 Submitted by: Yuri Skripachov <y.skripachov@gmail.com> Tested by: Yuri Skripachov <y.skripachov@gmail.com> MFC after: 2 weeks
|
216490 |
16-Dec-2010 |
jhb |
Small style fixes: - Avoid side-effect assignments in if statements when possible. - Don't use ! to check for NULL pointers, explicitly check against NULL. - Explicitly check error return values against 0. - Don't use INTR_MPSAFE for interrupt handlers with only filters as it is meaningless. - Remove unneeded function casts.
|
216488 |
16-Dec-2010 |
jhb |
Spelling fix.
|
216471 |
15-Dec-2010 |
jkim |
Merge ACPICA 20101209.
|
216443 |
14-Dec-2010 |
jkim |
Stop lying about supporting cpu_est_clockrate() when TSC is invariant. This function always returned the nominal frequency instead of current frequency because we use RDTSC instruction to calculate difference in CPU ticks, which is supposedly constant for the case. Now we support cpu_get_nominal_mhz() for the case, instead. Note it should be just enough for most usage cases because cpu_est_clockrate() is often times abused to find maximum frequency of the processor.
|
216263 |
07-Dec-2010 |
jhb |
Use proper resource ID's for HPET IRQ resources. This mostly consists of looking to see if there is an existing IRQ resource for a given IRQ provided by the BIOS and using that RID if so. Otherwise, allocate a new RID for the new IRQ.
Reviewed by: mav (a while ago)
|
215473 |
18-Nov-2010 |
jhb |
Various small typos and grammar nits in comments.
|
215188 |
12-Nov-2010 |
jkim |
Create C1 state when _CST is valid but _CST does not have one. Some BIOSes do not report C1 state in _CST object, probably because it is a mandatory state with or without existence of the optional _CST.
Reviewed by: avg
|
215097 |
10-Nov-2010 |
jkim |
Make APM emulation look more closer to its origin. Use device_get_softc(9) instead of hardcoding acpi(4) unit number as we have device_t for it.
|
215072 |
10-Nov-2010 |
jkim |
Refactor acpi_machdep.c for amd64 and i386, move APM emulation into a new file acpi_apm.c, and place it on sys/x86/acpica.
|
214998 |
08-Nov-2010 |
jkim |
Consistently use padding `_' in the comment.
|
214849 |
05-Nov-2010 |
jkim |
Add a forgotten change from the previous commit.
|
214848 |
05-Nov-2010 |
jkim |
Fix a use-after-free bug for extended IRQ resource[1]. When _PRS buffer is copied as a template for _SRS, a string pointer for descriptor name is also copied and it becomes stale as soon as it gets de-allocated[2]. Now _CRS is used as a template for _SRS as ACPI specification suggests if it is usable. The template from _PRS is still utilized but only when _CRS is not available or broken. To avoid use-after-free the problem in this case, however, only mandatory fields are copied, optional data is removed, and structure length is adjusted accordingly.
Reported by: hps[1] Analyzed by: avg[2] Tested by: hps
|
214765 |
03-Nov-2010 |
jkim |
Adjust a comment to clarify why \_SB_ and \_TZ_ are defined as device type in ACPICA. Reshuffle the code a bit to make sure this kludge only applies to these two specical cases and to make it cleaner.
|
214390 |
26-Oct-2010 |
jkim |
Add two new loader tunables 'hw.acpi.install_interface' and 'hw.acpi.remove_interface'. hw.acpi.install_interface lets you install new interfaces. Conversely, hw.acpi.remove_interface lets you remove OS interfaces from the pre-defined list in ACPICA. For example,
hw.acpi.install_interface="FreeBSD"
lets _OSI("FreeBSD") method to return 0xffffffff (or success) and
hw.acpi.remove_interface="Windows 2009"
lets _OSI("Windows 2009") method to return zero (or failure). Both are comma-separated lists and leading white spaces are ignored. For example, the following examples are valid:
hw.acpi.install_interface="Linux, FreeBSD" hw.acpi.remove_interface="Windows 2006, Windows 2006.1"
|
214110 |
20-Oct-2010 |
jkim |
Introduce a new tunable 'hw.pci.do_power_suspend'. This tunable lets you avoid PCI power state transition from D0 to D3 for suspending case. Default is 1 or enabled.
|
214076 |
19-Oct-2010 |
jkim |
Remove undocumented and stale debug.acpi.do_powerstate tunable. It was added with hw.pci.do_powerstate but the PCI version was splitted into two separate tunables later and now this is completely stale. To make it worse, PCI devices enumerated in ACPI tree ignore this tunable as it is handled by a function in acpi_pci.c instead.
|
214072 |
19-Oct-2010 |
jkim |
Remove PCI_SET_POWERSTATE method from acpi.c and eradicate all PCI-specific knowledges from the file. All PCI devices enumerated in ACPI tree must use correct one from acpi_pci.c any way. Reduce duplicate codes as we did for pci.c in r213905. Do not return ESRCH from PCIB_POWER_FOR_SLEEP method. When the method is not found, just return zero without modifying the given default value as it is completely optional. As a side effect, the return state must not be NULL. Note there is actually no functional change by removing ESRCH because acpi_pcib_power_for_sleep() always returns zero. Adjust debugging messages and add new ones under bootverbose to help debugging device power state related issues.
Reviewed by: jhb, imp (earlier versions)
|
214068 |
19-Oct-2010 |
jkim |
Make any PCI devices enumerated in ACPI tree honor do_power_resume as well.
|
213787 |
13-Oct-2010 |
jkim |
Clean up unused headers.
|
213783 |
13-Oct-2010 |
jkim |
Remove acpi_bus_number() completely. It had to be removed in r212761.
Pointed out by: jhb
|
213772 |
13-Oct-2010 |
rpaulo |
Mark acpi_bus_number() as __unused. This allows clang to this file without any warnings.
|
213755 |
13-Oct-2010 |
jkim |
Use AcpiReset() from ACPICA instead of rolling our own, which is actually incomplete. If FADT says the register is available, enable the capability by default. Remove the previous default value from acpi(4).
|
213737 |
12-Oct-2010 |
avg |
acpi_ec: changes in communication with hardware
Short description of the changes: - attempt to retry some commands for which it is possible (read, query) - always make a short sleep before checking EC status in polled mode - periodically poll EC status in interrupt mode - change logic for detecting broken interrupt delivery and falling back to polled mode - check that EC is ready for input before starting a new command, wait if necessary
This commit is based on the original patch by David Naylor.
PR: kern/150517 Submitted by: David Naylor <naylor.b.david@gmail.com> Reviewed by: jkim MFC after: 3 weeks
|
213302 |
30-Sep-2010 |
mav |
Do not use regular interrupts on NVidia HPETs. NVidia MCP5x chipsets have number of unexplained interrupt problems. For some reason, using HPET interrupts there breaks HDA sound. Legacy route mode interrupts reported to work fine there.
|
212997 |
22-Sep-2010 |
mav |
Quick fix for unmotivated C2 state usage during boot, introduced at r212541. That caused LAPIC timer failure and huge delays during boot on some systems.
|
212993 |
22-Sep-2010 |
avg |
acpi_attach: do not explicitly install default handlers for default address spaces
There has been no need to do that starting with ACPICA 20040427 as AcpiEnableSubsystem() installs the handlers automatically. Additionaly, explicitly calling AcpiInstallAddressSpaceHandler before AcpiEnableSubsystem is not supported by ACPICA and leads to too early execution of _REG methods in some DSDTs, which may result in problems.
Big thanks to Robert Moore of ACPICA/Intel for explaining the above.
Reported by: Daniel Bilik <daniel.bilik@neosystem.cz> Tested by: Daniel Bilik <daniel.bilik@neosystem.cz> Reviewed by: jkim Suggested by: "Moore, Robert" <robert.moore@intel.com> MFC after: 1 week
|
212761 |
16-Sep-2010 |
jkim |
Merge ACPICA 20100915.
|
212549 |
13-Sep-2010 |
avg |
acpi_cpu: do not apply P_LVLx_LAT rules to latencies returned by _CST
ACPI specification sates that if P_LVL2_LAT > 100, then a system doesn't support C2; if P_LVL3_LAT > 1000, then C3 is not supported. But there are no such rules for Cx state data returned by _CST. If a state is not supported it should not be included into the return package. In other words, any latency value returned by _CST is valid, it's up to the OS and/or user to decide whether to use it.
Submitted by: nork Suggested by: mav MFC after: 1 week
|
212541 |
13-Sep-2010 |
mav |
Refactor timer management code with priority to one-shot operation mode. The main goal of this is to generate timer interrupts only when there is some work to do. When CPU is busy interrupts are generating at full rate of hz + stathz to fullfill scheduler and timekeeping requirements. But when CPU is idle, only minimum set of interrupts (down to 8 interrupts per second per CPU now), needed to handle scheduled callouts is executed. This allows significantly increase idle CPU sleep time, increasing effect of static power-saving technologies. Also it should reduce host CPU load on virtualized systems, when guest system is idle.
There is set of tunables, also available as writable sysctls, allowing to control wanted event timer subsystem behavior: kern.eventtimer.timer - allows to choose event timer hardware to use. On x86 there is up to 4 different kinds of timers. Depending on whether chosen timer is per-CPU, behavior of other options slightly differs. kern.eventtimer.periodic - allows to choose periodic and one-shot operation mode. In periodic mode, current timer hardware taken as the only source of time for time events. This mode is quite alike to previous kernel behavior. One-shot mode instead uses currently selected time counter hardware to schedule all needed events one by one and program timer to generate interrupt exactly in specified time. Default value depends of chosen timer capabilities, but one-shot mode is preferred, until other is forced by user or hardware. kern.eventtimer.singlemul - in periodic mode specifies how much times higher timer frequency should be, to not strictly alias hardclock() and statclock() events. Default values are 2 and 4, but could be reduced to 1 if extra interrupts are unwanted. kern.eventtimer.idletick - makes each CPU to receive every timer interrupt independently of whether they busy or not. By default this options is disabled. If chosen timer is per-CPU and runs in periodic mode, this option has no effect - all interrupts are generating.
As soon as this patch modifies cpu_idle() on some platforms, I have also refactored one on x86. Now it makes use of MONITOR/MWAIT instrunctions (if supported) under high sleep/wakeup rate, as fast alternative to other methods. It allows SMP scheduler to wake up sleeping CPUs much faster without using IPI, significantly increasing performance on some highly task-switching loads.
Tested by: many (on i386, amd64, sparc64 and powerc) H/W donated by: Gheorghe Ardelean Sponsored by: iXsystems, Inc.
|
212533 |
13-Sep-2010 |
mav |
Add tunable 'hint.hpet.X.per_cpu' to specify how much per-CPU timers driver should provide if there is sufficient hardware. Default is 1.
|
212491 |
12-Sep-2010 |
mav |
Instead of storing last event timestamp, store the next event timestamp. It corrects handling of the first event offset in emulated periodic mode.
|
212413 |
10-Sep-2010 |
avg |
bus_add_child: change type of order parameter to u_int
This reflects actual type used to store and compare child device orders. Change is mostly done via a Coccinelle (soon to be devel/coccinelle) semantic patch. Verified by LINT+modules kernel builds.
Followup to: r212213 MFC after: 10 days
|
212323 |
08-Sep-2010 |
mav |
During SMP startup there is time window, when SMP started, but interrupts are still bound to BSP. It confuses timer management logic in per-CPU mode and may cause timer not being reloaded. Check such cases on interrupt arival and reload timer to give system some more time to manage proper binding.
|
212238 |
05-Sep-2010 |
mav |
Several improvements to HPET driver: - Add special check for case when time expires before being programmed. This fixes interrupt loss and respectively timer death on attempt to program very short interval. Increase minimal supported period to more realistic value. - Add support for hint.hpet.X.allowed_irqs tunable, allowing manually specify which interrupts driver allowed to use. Unluckily, many BIOSes program wrong allowed interrupts mask, so driver tries to stay on safe side by not using unshareable ISA IRQs. This option gives control over this limitation, allowing more per-CPU timers to be provided, when FSB interrupts are not supported. Value of this tunable is bitmask. - Do not use regular interrupts on virtual machines. QEMU and VirtualBox do not support them properly, that may cause problems. Stay safe by default. Same time both QEMU and VirtualBox work fine in legacy_route mode. VirtualBox also works fine if manually specify allowed ISA IRQs with above.
|
212172 |
03-Sep-2010 |
avg |
acpi: update stale comments about order of cpu devices probing
These comments should have been updated in r203776 when the order was changed.
Pointyhat to: avg MFC after: 3 days
|
211430 |
17-Aug-2010 |
jhb |
Add a new method to the PCI bridge interface, PCIB_POWER_FOR_SLEEP(). This method is used by the PCI bus driver to query the power management system to determine the proper device state to be used for a device during suspend and resume. For the ACPI PCI bridge drivers this calls acpi_device_pwr_for_sleep(). This removes ACPI-specific knowledge from the PCI and PCI-PCI bridge drivers.
Reviewed by: jkim
|
210977 |
06-Aug-2010 |
jkim |
When EC burst mode is activated and multiple bytes are accessed, do not disable and enable repeatedly, just do it once per call. It also reduces code duplication. Check all parameters early and fail immediately.
|
210976 |
06-Aug-2010 |
jkim |
Merge ACPICA 20100806.
|
210864 |
05-Aug-2010 |
jhb |
- Retire acpi_pcib_resume(). It is has just been an alias for bus_generic_resume() since the pci_link(4) driver was added. - Change the ACPI PCI-PCI bridge driver to inherit most of its methods from the generic PCI-PCI bridge driver. In particular, this will now restore PCI config registers for ACPI PCI-PCI bridges.
Tested by: Oleg Sharoyko osharoiko of gmail
|
210298 |
20-Jul-2010 |
mav |
Fix several un-/signedness bugs of r210290 and r210293. Add one more check.
|
210290 |
20-Jul-2010 |
mav |
Extend timer driver API to report also minimal and maximal supported period lengths. Make MI wrapper code to validate periods in request. Make kernel clock management code to honor these hardware limitations while choosing hz, stathz and profhz values.
|
210157 |
16-Jul-2010 |
jkim |
Simplify AcpiOsReadPort() and AcpiOsWritePort() with iodev_read_*() and iodev_write_*(). This removes unnecessary uses of temporary macros as well. There is no functional change after this (verified with md5(1) on amd64).
|
210155 |
16-Jul-2010 |
jkim |
Use pmap_mapdev()/pmap_unmapdev() to map device memory instead of using AcpiOsMapMemory()/AcpiOsUnmapMemory() (-> pmap_mapbios()/pmap_unmapbios()) for AcpiOsReadMemory() and AcpiOsWriteMemory(). Although they do not sound too obvious, these functions are exclusively used to access memory mapped IO in ACPICA.
|
210150 |
15-Jul-2010 |
jkim |
If there is any pending sleep request, disallow entering S5 state. Otherwise, bad things may happen. ;-)
|
210137 |
15-Jul-2010 |
jkim |
- AcpiOsReadPciConfiguration() needs similar fixes as r209965 and r210129. According to ACPICA User Guide and Programmer Reference, the read data must be zero extended to fill the 64-bit return value even if the bit width of the location is less than 64. - Return error when 64-bit access is requested as we do not support 64-bit PCI register access (yet). XXX We may have to split it up into two 32-bit accesses if it is really required.
|
210129 |
15-Jul-2010 |
jkim |
- AcpiOsReadMemory() needs similar fixes as r209965. [1] According to ACPICA User Guide and Programmer Reference, the read data must be zero extended to fill the 32-bit return value even if the bit width of the port is less than 32. - Remove 64-bit read/write from AcpiOsReadMemory() and AcpiOsWriteMemory(). These functions do not support 64-bit access (yet). Clean up style nits and unnecessary bit masking while I am here.
Reported by: Liu, Jinsong (jinsong dot liu at intel dot com) via Lin Ming (ming dot m dot lin at intel dot com) [1]
|
210003 |
13-Jul-2010 |
jkim |
Make SMP code path conditional at run-time.
|
209990 |
13-Jul-2010 |
mav |
Rise knowledge about curthread->td_intr_frame by one step. Make timer callback argument really opaque. Not repeat interrupt handler's problem in case somebody will ever need to have both argument and frame.
|
209966 |
13-Jul-2010 |
jkim |
Fix white spaces.
|
209965 |
13-Jul-2010 |
jkim |
According to ACPICA User Guide and Programmer Reference, the read data must be zero extended to fill the 32-bit return value even if the bit width of the port is less than 32.
|
209747 |
06-Jul-2010 |
jkim |
Fix mis-merges in the previous commit.
|
209746 |
06-Jul-2010 |
jkim |
Merge ACPICA 20100702.
|
209440 |
22-Jun-2010 |
mav |
Add "legacy route" support to HPET driver. When enabled, this mode makes HPET to steal IRQ0 from i8254 and IRQ8 from RTC timers. It can be suitable for HPETs without FSB interrupts support, as it gives them two unshared IRQs. It allows them to provide one per-CPU event timer on dual-CPU system, that should be suitable for further tickless kernels.
To enable it, such lines may be added to /boot/loader.conf: hint.atrtc.0.clock=0 hint.attimer.0.clock=0 hint.hpet.0.legacy_route=1
|
209431 |
22-Jun-2010 |
mav |
Do not set level-triggered interrupt mode if we are not going to use it. This fixes QEMU crash due to unsupported level-triggered HPET interrupts.
Reported by: kib@
|
209402 |
21-Jun-2010 |
mav |
Fix ia64 build broken by r209371. ia64, same as amd64 has ACPI and always has APIC.
Submitted by: jhb@
|
209371 |
20-Jun-2010 |
mav |
Implement new event timers infrastructure. It provides unified APIs for writing event timer drivers, for choosing best possible drivers by machine independent code and for operating them to supply kernel with hardclock(), statclock() and profclock() events in unified fashion on various hardware.
Infrastructure provides support for both per-CPU (independent for every CPU core) and global timers in periodic and one-shot modes. MI management code at this moment uses only periodic mode, but one-shot mode use planned for later, as part of tickless kernel project.
For this moment infrastructure used on i386 and amd64 architectures. Other archs are welcome to follow, while their current operation should not be affected.
This patch updates existing drivers (i8254, RTC and LAPIC) for the new order, and adds event timers support into the HPET driver. These drivers have different capabilities: LAPIC - per-CPU timer, supports periodic and one-shot operation, may freeze in C3 state, calibrated on first use, so may be not exactly precise. HPET - depending on hardware can work as per-CPU or global, supports periodic and one-shot operation, usually provides several event timers. i8254 - global, limited to periodic mode, because same hardware used also as time counter. RTC - global, supports only periodic mode, set of frequencies in Hz limited by powers of 2.
Depending on hardware capabilities, drivers preferred in following orders, either LAPIC, HPETs, i8254, RTC or HPETs, LAPIC, i8254, RTC. User may explicitly specify wanted timers via loader tunables or sysctls: kern.eventtimer.timer1 and kern.eventtimer.timer2. If requested driver is unavailable or unoperational, system will try to replace it. If no more timers available or "NONE" specified for second, system will operate using only one timer, multiplying it's frequency by few times and uing respective dividers to honor hz, stathz and profhz values, set during initial setup.
|
209330 |
19-Jun-2010 |
mav |
Oops! Add " / hz" missed in r209328. Assume interrupt rate hz/2, not 1/2.
|
209328 |
19-Jun-2010 |
mav |
While we indeed can't precisely measure time spent in C1, we can consider measured interval as upper bound. It should be more precise then just assuming hz/2. For idle CPU it should be quite precise, for busy - not worse then before.
|
209213 |
15-Jun-2010 |
jhb |
When updating individual CPU's lowest Cx state to use, never set it to a state lower than the lowest one supported by the current CPU. This closes some races with changes to the hw.acpi.cpu_cx_lowest sysctl while Cx states for individual CPUs were changing (e.g. unplugging the AC adapter of a laptop) that could result in panics.
Submitted by: Giovanni Trematerra Tested by: David Demelier demelier dot david of gmail MFC after: 3 days
|
209065 |
11-Jun-2010 |
jkim |
Simplify a function for getting brightness levels.
|
209064 |
11-Jun-2010 |
jkim |
Remove unused assignment.
Found by: clang static analyzer Found by: Coverity Prevent[tm] (CID 4537, 4538, 4539)
|
209062 |
11-Jun-2010 |
avg |
fix a few cases where a string is passed via format argument instead of via %s
Most of the cases looked harmless, but this is done for the sake of correctness. In one case it even allowed to drop an intermediate buffer.
Found by: clang MFC after: 2 week
|
209059 |
11-Jun-2010 |
jhb |
Update several places that iterate over CPUs to use CPU_FOREACH().
|
208925 |
08-Jun-2010 |
jhb |
The lock associated with the /dev/apm knote is already held, so use KNOTE_LOCKED() instead of KNOTE_UNLOCKED().
Reported by: mav MFC after: 3 days
|
208722 |
01-Jun-2010 |
jkim |
Remove unnecessary pointer type castings, shift operations and dead code.
|
208438 |
23-May-2010 |
mav |
Oops, HPET ID optionally stored in _UID, not in _ADR.
|
208436 |
23-May-2010 |
mav |
Make table-based HPET identification more clever. Before creating fake device, make sure we have no real HPET device entry with same ID. As side effect, it potentially allows several HPETs to be attached. Use first of them for timecounting, rest (if ever present) could later be used as event sources.
|
207344 |
28-Apr-2010 |
jkim |
Merge ACPICA 20100428.
|
206117 |
02-Apr-2010 |
jkim |
Merge ACPICA 20100331 (and four additional upstream patches).
|
204965 |
10-Mar-2010 |
jkim |
Fix white spaces.
|
204916 |
09-Mar-2010 |
jkim |
- Allow users to enable dumping Debug objects without ACPI debugger. Setting the new sysctl MIB "debug.acpi.enable_debug_objects" to a non-zero value enables us to print Debug object when something is written to it. - Allow users to disable interpreter slack mode. Setting the new tunable "debug.acpi.interpreter_slack" to zero disables some workarounds for common BIOS mistakes and enables strict ACPI implementations by the specification.
|
204773 |
05-Mar-2010 |
jkim |
Merge ACPICA 20100304.
|
203936 |
15-Feb-2010 |
jkim |
Rename some macros to clarify their intentions and fix style nits.
|
203935 |
15-Feb-2010 |
jkim |
Add support for `cycle' and `zero' events for LCD brightness control.
Submitted by: Daniel Walter (d dot walter at 0x90 dot at) (intial version)
|
203813 |
13-Feb-2010 |
jkim |
Make sanity check slightly more useful and tweak an error message.
|
203810 |
13-Feb-2010 |
jkim |
Implement LCD brightness control notify handler.
Submitted by: Daniel Walter(d dot walter at 0x90 dot at) (intial version)
|
203785 |
11-Feb-2010 |
avg |
acpi: drop the second bus_generic_attach pass
It is belived that that pass s not needed anymore. Specifically it is not required now for the reasons that were given in the removed comment.
Discussed with: jhb MFC after: 4 weeks
|
203776 |
11-Feb-2010 |
avg |
acpi cpu: probe+attach before all other enumerated children on acpi bus
Some current systems dynamically load SSDT(s) when _PDC/_OSC method of Processor is evaluated. Other devices in ACPI namespace may access objects defined in the dynamic SSDT. Drivers for such devices might have to have a rather high priority, because of other dependencies. Good example is acpi_ec driver for EC. Thus we attach to Processors as early as possible to load the SSDTs before any other drivers may try to evaluate control methods. It also seems to be a natural order for a processor in a device hierarchy.
On the other hand, some child devices on acpi cpu bus need to access other system resources like PCI configuration space of chipset devices, so they need to be probed and attached rather late. For this reason we probe and attach the cpu bus at SI_SUB_CONFIGURE:SI_ORDER_MIDDLE SYSINIT level. In the future this could be done more elegantly via multipass.
Please note that acpi drivers that might access ACPI namespace from device_identify will do that before _PDC/_OSC of Processors are evaluated.
Legacy cpu driver is not affected by this change.
PR: kern/142561 (in part) Reviewed by: jhb Silence from: acpi@ MFC after: 5 weeks
|
203546 |
06-Feb-2010 |
avg |
acpi_cpu: prefer _OSC over _PDC, just in case
_PDC was deprecated in favor of _OSC long time ago, but it seems that they still peacefully coexist and in some case only _PDC is present. Still _OSC provides a reacher interface and is capable to report back its status. If the status is non-zero, then report it, we may find it useful to understand what firmware expects from OS. Also clean up some comments that became less useful over time.
Reviewed by: njl, jhb, rpaulo MFC after: 3 weeks
|
203430 |
03-Feb-2010 |
avg |
acpi_cpu: correct capabilities arguments for Processor _OSC evaluation
Populate capabilities buffer according to Intel Processor Vendor-Specific ACPI Interface Specification.
MFC after: 2 weeks
|
203062 |
27-Jan-2010 |
avg |
acpi_hpet: correctly get number of timers/comparators in a timer block
Also, account for a quirk of AMD/ATI HPET which reports number of timers instead of id of the last timer as manadated by the specification. Currently this has no effect on functionality but in the future we may make actual use of the HPET timers, not only of its timecounter.
MFC after: 2 weeks
|
202771 |
21-Jan-2010 |
jkim |
Merge ACPICA 20100121.
|
202567 |
18-Jan-2010 |
avg |
acpi_ec: remove redundant acpi_disabled check in probe method
MFC after: 4 days
|
202558 |
18-Jan-2010 |
avg |
acpi_ec: clean up 'private' ivar when freeing memory to which it points
This is not only a prudent thing to do, but also makes sure that probe method is not confused by non-NULL 'private', if the previous attach attempt fails for any reason.
PR: kern/142561 Tested by: Alex Goncharov <alex-goncharov@comcast.net> MFC after: 4 days
|
199337 |
16-Nov-2009 |
jkim |
Merge ACPICA 20091112.
|
199016 |
07-Nov-2009 |
avg |
acpi: remove 'magic' ivar
o acpi_hpet: auto-added 'wildcard' devices can be identified by non-NULL handle attribute. o acpi_ec: auto-add 'wildcard' devices can be identified by unset (NULL) private attribute. o acpi_cpu: use private instead of magic to store cpu id.
Reviewed by: jhb Silence from: acpi@ MFC after: 2 weeks X-MFC-Note: perhaps the ivar should stay for ABI stability
|
197649 |
30-Sep-2009 |
jhb |
Do not hold the ACPI A/C adapter lock when changing the power profile.
MFC after: 2 weeks
|
197648 |
30-Sep-2009 |
jhb |
Split the 'video' ACPI lock up into two locks to resolve a LOR with the sysctl lock. The 'video' lock now protects the 'bus' of video output devices attached to a graphics adapter. It is used when iterating over the list of outputs, etc. The 'video_output' lock is used to lock the output-specific data similar to a driver lock for the individual video outputs.
MFC after: 2 weeks
|
197536 |
27-Sep-2009 |
jkim |
Copy apm(4) emulation from sys/i386/acpica/acpi_machdep.c and install apm(8) and apm_bios.h on amd64.
|
197439 |
23-Sep-2009 |
jhb |
Extract the code to find and map the MADT ACPI table during early kernel startup and genericize it so it can be reused to map other tables as well: - Add a routine to walk a list of ACPI subtables such as those used in the APIC and SRAT tables in the MI acpi(4) driver. - Move the routines for mapping and unmapping an ACPI table as well as mapping the RSDT or XSDT and searching for a table with a given signature out into acpica_machdep.c for both amd64 and i386.
|
197438 |
23-Sep-2009 |
jhb |
Uninline an instance of STAILQ_FOREACH_SAFE().
|
197105 |
11-Sep-2009 |
jkim |
Catch up with ACPICA 20090903.
|
196520 |
24-Aug-2009 |
jhb |
Tweak the way that the ACPI and ISA bus drivers match hint devices to BIOS-enumerated devices: - Assume a device is a match if the memory and I/O ports match even if the IRQ or DRQ is wrong or missing. Some BIOSes don't include an IRQ for the atrtc device for example. - Add a hack to better match floppy controller devices. Many BIOSes do not include the starting port of the floppy controller listed in the hints (0x3f0) in the resources for the device. So far, however, all the BIOS variations encountered do include the 'port + 2' resource (0x3f2), so adjust the matching for "fdc" devices to look for 'port + 2'.
Reviewed by: imp MFC after: 3 days
|
196403 |
20-Aug-2009 |
jhb |
Temporarily revert the new-bus locking for 8.0 release. It will be reintroduced after HEAD is reopened for commits by re@.
Approved by: re (kib), attilio
|
196037 |
02-Aug-2009 |
attilio |
Make the newbus subsystem Giant free by adding the new newbus sxlock. The newbus lock is responsible for protecting newbus internIal structures, device states and devclass flags. It is necessary to hold it when all such datas are accessed. For the other operations, softc locking should ensure enough protection to avoid races.
Newbus lock is automatically held when virtual operations on the device and bus are invoked when loading the driver or when the suspend/resume take place. For other 'spourious' operations trying to access/modify the newbus topology, newbus lock needs to be automatically acquired and dropped.
For the moment Giant is also acquired in some key point (modules subsystem) in order to avoid problems before the 8.0 release as module handlers could make assumptions about it. This Giant locking should go just after the release happens.
Please keep in mind that the public interface can be expanded in order to provide more support, if there are really necessities at some point and also some bugs could arise as long as the patch needs a bit of further testing.
Bump __FreeBSD_version in order to reflect the newbus lock introduction.
Reviewed by: ed, hps, jhb, imp, mav, scottl No answer by: ariff, thompsa, yongari Tested by: pho, G. Trematerra <giovanni dot trematerra at gmail dot com>, Brandon Gooch <jamesbrandongooch at gmail dot com> Sponsored by: Yahoo! Incorporated Approved by: re (ksmith)
|
195666 |
13-Jul-2009 |
jkim |
Match PCI Express root bridge _HID directly instead of relying on _CID.
Reviewed by: jhb Approved by: re (kib)
|
194639 |
22-Jun-2009 |
jkim |
Add a missing return in NULL mutex case.
Submitted by: Pawel Worach (pawel dot worach at gmail dot com)
|
194011 |
11-Jun-2009 |
jkim |
- Remove unnecessary read memory barriers from atomic operations[1]. - Define a macro to make my intention more clearer.
Submitted by: jhb [1]
|
193963 |
10-Jun-2009 |
jkim |
Catch up with r193750 (OsdSynch.c locking changes):
- Preallocate some memory for ACPI tasks early enough. We cannot use malloc(9) any more because spin mutex may be held here. The reserved memory can be tuned via debug.acpi.max_tasks tunable or ACPI_MAX_TASKS in kernel configuration. The default is 32 tasks. - Implement a custom taskqueue_fast to wrap the new memory allocation. This implementation is not the fastest in the world but we are being conservative here.
|
193829 |
09-Jun-2009 |
jhb |
Rework the _BBN handling for Host-PCI bridges. Previously we only trusted a _BBN value of 0 if it was for the first bridge encountered since some older systems returned _BBN of 0 for all bridges. However, some newer systems enumerate bridges with non-zero _BBN before bus 0 which is perfectly valid. Handle both cases by trusting the first bridge that has a _BBN of 0 and falling back to reading from non-standard config registers only for subsequent bridges with a _BBN of 0. We also only perform this check for segment (domain) 0. We assume that _BBN is always correct for segments other than 0.
Tested by: Josef Moellers josef.moellers at fujitsu MFC after: 1 week
|
193753 |
08-Jun-2009 |
jkim |
Remove redundant checks for ACPI_WAIT_FOREVER cases.
|
193750 |
08-Jun-2009 |
jkim |
Rewrite OsdSynch.c to reflect the latest ACPICA more closely:
- Implement ACPI semaphore (ACPI_SEMAPHORE) with condvar(9) and mutex(9). - Implement ACPI mutex (ACPI_MUTEX) with mutex(9). - Implement ACPI lock (ACPI_SPINLOCK) with spin mutex(9).
|
193530 |
05-Jun-2009 |
jkim |
Import ACPICA 20090521.
|
192450 |
20-May-2009 |
imp |
We no longer need to use d_thread_t, migrate to struct thread *.
|
191764 |
03-May-2009 |
mav |
Make dev.cpu.X.cx_usage sysctl also report current average of sleep time.
|
191763 |
03-May-2009 |
mav |
Remove unused variable and fix spelling in comment.
|
191760 |
02-May-2009 |
mav |
Avoid comparing negative signed to positive unsignad values. It was leading to a bug, when C-state does not decrease on sleep shorter then declared transition latency. Fixing this deprecates workaround for broken C-states on some hardware.
By the way, change state selecting logic a bit. Instead of last sleep time use short-time average of it. Global interrupts rate in system is a quite random value, to corellate subsequent sleeps so directly.
|
191699 |
30-Apr-2009 |
jkim |
Fix off-by-one bug. S5 state must be checked as well.
|
191697 |
30-Apr-2009 |
jkim |
Fix style(9).
|
191696 |
30-Apr-2009 |
jkim |
Prefer device_printf() over printf() where ever possible.
|
191695 |
30-Apr-2009 |
jkim |
General sleep state change clean up.
- Probe supported sleep states from acpi_attach() just once and do not call AcpiGetSleepTypeData() again. It is redundant because AcpiEnterSleepStatePrep() does it any way. - Treat UNKNOWN sleep state as NONE, i.e., "do nothing", and remove obscure NONE state (ACPI_S_STATES_MAX + 1) to avoid confusions. - Do not set unsupported sleep states as default button/switch events. If the default sleep state is not supported, just set it as UNKNOWN/NONE. - Do not allow sleep state change if the system is not fully up and running. This should prevent entering S5 state multiple times, which causes strange behaviours later. - Make sleep states case-insensitive when they are used with sysctl(8). For example,
sysctl hw.acpi.lid_switch_state=s1 sysctl hw.acpi.sleep_button_state=none
are now legal and equivalent to the uppercase ones.
|
191627 |
28-Apr-2009 |
avg |
acpi: do not run resume/backout code when entering S0/S5 states
This change adds (possibly redundant) early check for invalid state input parameter (including S0). Handling of S5 request is reduced to simply calling shutdown_nice(). As a result control flow of acpi_EnterSleepState is somewhat simplified and resume/backout half of the function is not executed for S5 (soft poweroff) request and invalid state requests.
Note: it seems that shutdown_nice may act as nop when initproc is already initialized (to grab pid of 1), but init process is in "pre-natal" state.
Tested by: Fabian Keil <fk@fabiankeil.de> Reviewed by: njl, jkim Approved by: rpaulo
|
190454 |
26-Mar-2009 |
jhb |
Move the code to update cpu_cx_count out of acpi_cpu_generic_cx_probe() and into acpi_cpu_startup() which is where all the other code to update this global variable lives. This fixes a bug where cpu_cx_count was not updated correctly if acpi_cpu_generic_cx_probe() returned early.
PR: kern/108581 Debugged by: Bruce Cran Reviewed by: avg, njl, sepotvin MFC after: 3 days
|
190340 |
23-Mar-2009 |
jkim |
Add a function to reset system time after resuming, which will be used by amd64 shortly. It can be turned off by setting "debug.acpi.reset_clock" tunable to zero.
|
190339 |
23-Mar-2009 |
jkim |
Check whether devd is running before calling resume notifier and reshuffle code to reduce unnecessary locking coverage.
|
189903 |
17-Mar-2009 |
jkim |
Initial suspend/resume support for amd64.
This code is heavily inspired by Takanori Watanabe's experimental SMP patch for i386 and large portion was shamelessly cut and pasted from Peter Wemm's AP boot code.
|
188814 |
19-Feb-2009 |
avg |
acpi_cpu: fixup for PIIX4E PCI config related to C2
This is triggered only if BIOS configures ACPI_BITREG_BUS_MASTER_RLD aka BRLD_EN_BM to 1. Rationale: 1. we do not support C3 on PIIX4E 2. bus master activity need not break out of C2 state 3. because of CPU_QUIRK_NO_BM_CTRL quirk we may reset bus master status which would result in immediate break out from C2
So if you have seen cpu0: too many short sleeps, backing off to C1 with this chipset before you may want to try cx_lowest of C2 again.
Reviewed by: rpaulo (mentor), njl Approved by: rpaulo (mentor)
|
188163 |
05-Feb-2009 |
imp |
pcib_read_config and pcib_write_config take u_int params.
|
187368 |
17-Jan-2009 |
mav |
Convert battery capacity/rate from mA to mW only when summary is requested. Unconditional conversion causes incorrect rate units reported by acpiconf.
MFC after: 2 weeks
|
186031 |
13-Dec-2008 |
silby |
Quick change to r186026. One of the conditionals was:
if (batt_sleep_ms) AcpiOsSleep(1);
where the rest are all:
if (batt_sleep_ms) AcpiOsSleep(batt_sleep_ms);
I can't recall why that one was different, so change it to match the rest.
Pointed out by: Christoph Mallon MFC after: 2 weeks
|
186026 |
13-Dec-2008 |
silby |
Add the sysctl debug.acpi.batt.batt_sleep_ms.
On some laptops with smart batteries, enabling battery monitoring software causes keystrokes from atkbd to be lost. This has also been reported on Linux, and is apparently due to the keyboard and I2C line for the battery being routed through the same chip. Whether that's accurate or not, adding extra sleeps to the status checking code causes the problem to go away.
I've been running this for nearly six months now on my laptop, it works like a charm.
Reviewed by: Nate Lawson (in a previous revision) MFC after: 2 weeks
|
185308 |
25-Nov-2008 |
ganbold |
Remove unused variable.
Found with: Coverity Prevent(tm) CID: 3678
Approved by: njl
|
185103 |
19-Nov-2008 |
jkim |
Make sure legacy replacement route is turned off when enbling HPET.
Reviewed by: jhb
|
185059 |
18-Nov-2008 |
jhb |
Allow device hints to wire the unit numbers of devices. - An "at" hint now reserves a device name. - A new BUS_HINT_DEVICE_UNIT method is added to the bus interface. When determining the unit number of a device, this method is invoked to let the bus driver specify the unit of a device given a specific devclass. This is the only way a device can be given a name reserved via an "at" hint. - Implement BUS_HINT_DEVICE_UNIT() for the acpi(4) and isa(4) bus drivers. Both of these busses implement this by comparing the resources for a given hint device with the resources enumerated by ACPI/PnPBIOS and wire a unit if the hint resources are a subset of the "real" resources. - Use bus_hinted_children() for adding hinted devices on isa(4) busses now instead of doing it by hand. - Remove the unit kludging from sio(4) as it is no longer necessary.
Prodding from: peter, imp OK'd by: marcel MFC after: 1 month
|
184596 |
03-Nov-2008 |
mav |
Remove " + 1". Thread ID can't be zero anyway while increment may give owerflow.
|
184563 |
02-Nov-2008 |
imp |
Make the no driver stuff an ifdef.
|
184558 |
02-Nov-2008 |
mav |
As soon as we have several threads per process now, it is not correct to use process ID as ACPI thread ID. Concurrent requests with equal thread IDs broke ACPI mutexes operation causing unpredictable errors including AE_AML_MUTEX_NOT_ACQUIRED that I have seen.
Use kernel thread ID instead of process ID for ACPI thread.
|
183190 |
19-Sep-2008 |
jkim |
Clean up DSDT and XSDT correctly instead of FADT when the tables are bad.
Submitted by: jhb Tested by: olli MFC after: 3 days
|
182071 |
23-Aug-2008 |
imp |
Handle errors from device_get_children.
|
181987 |
22-Aug-2008 |
jhb |
Extend the support for PCI-e memory mapped configuration space access: - Rename pciereg_cfgopen() to pcie_cfgregopen() and expose it to the rest of the kernel. It now also accepts parameters via function arguments rather than global variables. - Add a notion of minimum and maximum bus numbers and reject requests for an out of range bus. - Add more range checks on slot/func/reg/bytes parameters to the cfg reg read/write routines. Don't panic on any invalid parameters, just fail the request (writes do nothing, reads return -1). This matches the behavior of the other cfg mechanisms. - Port the memory mapped configuration space access to amd64. On amd64 we simply use the direct map (via pmap_mapdev()) for the memory mapped window. - During acpi_attach() just after loading the ACPI tables, check for a MCFG table. If it exists, call pciereg_cfgopen() on each subtable (memory mapped window). For now we only support windows for domain 0 that start with bus 0. This removes the need for more chipset-specific quirks in the MD code. - Remove the chipset-specific quirks for the Intel 5000P/V/Z chipsets since these machines should all have MCFG tables via ACPI. - Updated pci_cfgregopen() to DTRT if ACPI had invoked pcie_cfgregopen() earlier.
MFC after: 2 weeks
|
181299 |
04-Aug-2008 |
jhb |
Fix a typo.
|
180760 |
23-Jul-2008 |
jhb |
Further refine the probe order of devices to more closely match the previous behavior. Specifically, probe Host-PCI bridges in the order they are encountered in the tree. For CPUs, just use an order of 100000 and assume that no Host-PCI bridges will be more than 10000 levels deep in the namespace. This fixes an issue on some boxes where the HPET timer stopped attaching.
|
178506 |
25-Apr-2008 |
rpaulo |
Initialize tz_active to a new constant TZ_ACTIVE_UNKNOWN and make no assumptions about the state of the cooling devices. Instead, switch them off on init and, only after that, we are in TZ_ACTIVE_NONE.
Submited by: Andriy Gapon <avg at icyb.net.ua> Reviewed by: njl
|
178146 |
12-Apr-2008 |
rpaulo |
Update the list of Cx states when ACPICA notifies us. Usually, this notification is sent when the AC plug is plugged in/out.
This is required on some laptops, namely the MacBooks.
Silence on: freebsd-acpi
|
177985 |
07-Apr-2008 |
jhb |
Revert back to probing Host-PCI bridges in the order we encounter them in the tree rather than sorting them by their address on PCI bus 0.
Reported by: kan
|
177934 |
05-Apr-2008 |
takawata |
GPE lock may recurse on resume path.
|
177157 |
13-Mar-2008 |
jhb |
Rework how the nexus(4) device works on x86 to better handle the idea of different "platforms" on x86 machines. The existing code already handles having two platforms: ACPI and legacy. However, the existing approach was rather hardcoded and difficult to extend. These changes take the approach that each x86 hardware platform should provide its own nexus(4) driver (it can inherit most of its behavior from the default legacy nexus(4) driver) which is responsible for probing for the platform and performing appropriate platform-specific setup during attach (such as adding a platform-specific bus device). This does mean changing the x86 platform busses to no longer use an identify routine for probing, but to move that logic into their matching nexus(4) driver instead. - Make the default nexus(4) driver in nexus.c on i386 and amd64 handle the legacy platform. It's probe routine now returns BUS_PROBE_GENERIC so it can be overriden. - Expose a nexus_init_resources() routine which initializes the various resource managers so that subclassed nexus(4) drivers can invoke it from their attach routine. - The legacy nexus(4) driver explicitly adds a legacy0 device in its attach routine. - The ACPI driver no longer contains an new-bus identify method. Instead it exposes a public function (acpi_identify()) which is a probe routine that the MD nexus(4) drivers can use to probe for ACPI. All of the probe logic in acpi_probe() is now moved into acpi_identify() and acpi_probe() is just a stub. - On i386 and amd64, an ACPI-specific nexus(4) driver checks for ACPI via acpi_identify() and claims the nexus0 device if the probe succeeds. It then explicitly adds an acpi0 device in its attach routine. - The legacy(4) driver no longer knows anything about the acpi0 device. - On ia64 if acpi_identify() fails you basically end up with no devices. This matches the previous behavior where the old acpi_identify() would fail to add an acpi0 device again leaving you with no devices.
Discussed with: imp Silence on: arch@
|
177041 |
10-Mar-2008 |
jhb |
Probe CPUs after the PCI hierarchy on i386, amd64, and ia64. This allows the cpufreq drivers to reliably use properties of PCI devices for quirks, etc. - For the legacy drivers, add CPU devices via an identify routine in the CPU driver itself rather than in the legacy driver's attach routine. - Add CPU devices after Host-PCI bridges in the acpi bus driver. - Change the ichss(4) driver to use pci_find_bsf() to locate the ICH and check its device ID rather than having a bogus PCI attachment that only checked for the ID in probe and always failed. As a side effect, you can now kldload ichss after boot. - Fix the ichss(4) driver to use the correct device_t for the ICH (and not for ichss0) when doing PCI config space operations to enable SpeedStep.
MFC after: 2 weeks Reviewed by: njl, Andriy Gapon avg of icyb.net.ua
|
176972 |
09-Mar-2008 |
rpaulo |
Some PIIX4 chipsets need to be told to generate Stop Breaks by setting the appropriate bit in the DEVACTB register. This change allows the C2 state on those systems to work as expected.
Reviewed by: njl Submitted by: Andriy Gapon <avg at icyb.net.ua> MFC after: 1 week
|
176329 |
16-Feb-2008 |
ume |
Create a thread to handle passive cooling for 1st zone which has _PSV, _TSP, _TC1 and _TC2.
Contirmed by: "Alexandre \"Sunny\" Kovalenko" <alex.kovalenko_at_verizon.net> Reviewed by: njl MFC after: 1 week
|
176327 |
16-Feb-2008 |
rpaulo |
Allow the user to override the current active cooling state if state is currently TZ_ACTIVE_NONE.
Submitted by: Andriy Gapon <avg at icyb.net.ua> Reviewed by: njl (mentor) Approved by: njl (mentor) Requested by: njl (mentor) MFC after: 3 days
|
176326 |
16-Feb-2008 |
rpaulo |
Skip validation of the C3 state if we disabled C3 by software (i.e., via quirk).
Submitted by: Andriy Gapon <avg at icyb.net.ua> Reviewed by: njl (mentor) Approved by: njl (mentor) Requested by: njl (mentor) MFC after: 3 days
|
176205 |
12-Feb-2008 |
jhb |
Fix a typo when testing for the NO_C3 quirk.
MFC after: 3 days
|
175732 |
28-Jan-2008 |
iwasaki |
Return errno value rather than boolean in this context.
MFC after: 1 week
|
175727 |
27-Jan-2008 |
iwasaki |
Enter the sleep state immediately without waiting for timeout if devd(8) is not running such as the system in single user mode.
MFC after: 1 week
|
175385 |
16-Jan-2008 |
jhb |
Add a header containing constants for the various HPET registers and their fields and update the code to match. The PR served more as an inspiration than providing the actual diffs.
MFC after: 1 week PR: kern/112544
|
175361 |
15-Jan-2008 |
jhb |
Fix a few minor issues based on a bug report and reading over the HPET spec: - Use read/modify/write cycles to enable and disable the HPET instead of writing 0 to reserved bits. - Shutdown the HPET during suspend as encouraged by the spec. - Fail to attach to an HPET with a period of zero.
MFC after: 1 week PR: kern/119675 [3] Reported by: Leo Bicknell | bicknell ufp.org
|
175256 |
12-Jan-2008 |
njl |
Fix GPE livelock that occurs on HP/Compaq laptops, mostly in the thermal zone code. The GPE handler method (i.e. _L00) generates various Notify events that need to be run to completion before the GPE is re-enabled. In ACPI-CA, we queue an asynch callback at the same priority as a Notify so that it will only run after all Notify handlers have completed. The callback re-enables the GPE afterwards. We also changed the priority of Notifies to be the same as GPEs, given the possibility that another GPE could arrive before the Notifies have completed and we don't want it to get queued ahead of the rest.
The ACPI-CA change was submitted by Alexey Starikovskiy (SUSE) and will appear in a later release. Special thanks to him for helping track this bug down.
MFC after: 1 week Tested by: jhb, Yousif Hassan <yousif / alumni.jmu.edu>
|
175014 |
31-Dec-2007 |
jhb |
Use devclass_get_count() instead of devclass_get_maxunit() to get the correct number of acpi_thermalX devices. Having this wrong caused the acpi_thermal thread to realloc the array of devices on each loop iteration.
MFC after: 1 week PR: kern/118497 Submitted by: Pasi Parviainen
|
174898 |
25-Dec-2007 |
rwatson |
Add a new 'why' argument to kdb_enter(), and a set of constants to use for that argument. This will allow DDB to detect the broad category of reason why the debugger has been entered, which it can use for the purposes of deciding which DDB script to run.
Assign approximate why values to all current consumers of the kdb_enter() interface.
|
174889 |
24-Dec-2007 |
ume |
Add sysctl mibs for _TSP, _TC1 and _TC2 which is user overridable but is blocked on user_override mib. Not a few people want to use a passive cooling without their ACPI BIOS support.
Reviewed by: njl
|
173782 |
20-Nov-2007 |
jkim |
Check battery presence first before trying to get battery information.
PR: kern/117591 Tested by: Jessica Mahoney (root at varusonline dot com)
|
173480 |
08-Nov-2007 |
njl |
Whitespace only.
|
173284 |
02-Nov-2007 |
njl |
Fix a shutdown hang on some SMP systems. The previous logic was to IPI all CPUs to make sure idle threads are evicted from the softc before returning from acpi_cpu_shutdown(). However, this is unnecessary since stop_cpus() handles this for itself and at this point it's possible that our IPI will be blocked (interrupts disabled).
Thanks to: Glen Leeder <glen.leeder / nokia.com> MFC after: 3 days
|
173082 |
27-Oct-2007 |
jhb |
Don't return an error from resume() if execution of _DIS fails for some reason (not all BIOSen have _DIS methods for all link devices for example). This matches the behavior of attach() with respect to _DIS as well.
Submitted by: njl
|
173062 |
27-Oct-2007 |
jhb |
Don't destroy an ACPI device_t for a PCI device and reassign the ACPI handle to the PCI device_t if the ACPI device_t is already attached to a driver. This happens on the Tablet TC1000 which for some reason includes two PCI-ISA bridges and treats the second bridge as an ACPI system resource device.
Reviewed by: njl (a while ago) MFC after: 3 days
|
173058 |
27-Oct-2007 |
jhb |
Don't always re-route IRQs on resume. If this link hasn't been used, then disable it with _DIS rather than assigning it an IRQ on resume.
MFC after: 1 week
|
172987 |
25-Oct-2007 |
takawata |
More style nit. Pointed out by: njl.
|
172978 |
25-Oct-2007 |
takawata |
Fix variable name to be clear what it means.
|
172973 |
25-Oct-2007 |
takawata |
Turn EC into poll mode before device_resume invoked .
|
172836 |
20-Oct-2007 |
julian |
Rename the kthread_xxx (e.g. kthread_create()) calls to kproc_xxx as they actually make whole processes. Thos makes way for us to add REAL kthread_create() and friends that actually make theads. it turns out that most of these calls actually end up being moved back to the thread version when it's added. but we need to make this cosmetic change first.
I'd LOVE to do this rename in 7.0 so that we can eventually MFC the new kthread_xxx() calls.
|
172490 |
09-Oct-2007 |
njl |
When the EC times out (common with Compaqs), it may report a design voltage of 0. This can result in a divide by zero trap. Add a guard for this case. The value of lfcap is checked in acpi_battery_bif_valid() just before this, so it is safe.
Reportd by: sam Approved by: re MFC after: 3 days
|
172489 |
09-Oct-2007 |
njl |
Fix the HPET table probe routine to run from device_identify() instead of directly from acpi0. Before it would attach prior to the sysresource devices, causing the later allocation of its memory range to fail and print a warning like "acpi0: reservation of fed00000, 1000 (3) failed". Use an explicit define for our probe order base value of 10.
Help from: jhb Tested by: Abdullah Ibn Hamad Al-Marri <almarrie / gmail.com> MFC after: 3 days Approved by: re
|
172394 |
30-Sep-2007 |
marius |
Make the PCI code aware of PCI domains (aka PCI segments) so we can support machines having multiple independently numbered PCI domains and don't support reenumeration without ambiguity amongst the devices as seen by the OS and represented by PCI location strings. This includes introducing a function pci_find_dbsf(9) which works like pci_find_bsf(9) but additionally takes a domain number argument and limiting pci_find_bsf(9) to only search devices in domain 0 (the only domain in single-domain systems). Bge(4) and ofw_pcibus(4) are changed to use pci_find_dbsf(9) instead of pci_find_bsf(9) in order to no longer report false positives when searching for siblings and dupe devices in the same domain respectively. Along with this change the sole host-PCI bridge driver converted to actually make use of PCI domain support is uninorth(4), the others continue to use domain 0 only for now and need to be converted as appropriate later on. Note that this means that the format of the location strings as used by pciconf(8) has been changed and that consumers of <sys/pciio.h> potentially need to be recompiled.
Suggested by: jhb Reviewed by: grehan, jhb, marcel Approved by: re (kensmith), jhb (PCI maintainer hat)
|
172313 |
24-Sep-2007 |
njl |
Rewrite the EC driver event model. The main goal is to avoid polling/interrupt-driven fallback and instead use polling only during boot and pure interrupt-driven mode after boot. Polled mode could be relegated completely to a legacy role if we could enable interrupts during boot. Polled mode can be forced after boot by setting debug.acpi.ec.polled="1", i.e. if there are timeouts.
- Use polling only during boot, shutdown, or if requested by the user. Otherwise, use a generation count of GPEs, incremented atomically. This prevents an old status value from being used if the EC is really slow and the same condition (i.e. multiple IBEs for a write transaction) is being checked. - Check for and run the query handler directly if the SCI bit is set in the status register during boot. Previously, the query handler wouldn't run until interrupts were finally enabled late in boot. - During boot and after starting a command, check if the event appears to already have occurred before we even start waiting. If so, it's possible the EC is very slow and we might accept an old status value. Print a warning in this case. Once we've booted, interrupt-driven mode should work just fine but polled mode could be unreliable. There's not much more we can do about this until interrupts are enabled during boot. - In the above case, we also do one final check if the interrupt-driven mode gets a timeout. If the status is complete, it will force the system back into polled mode since interrupt mode doesn't work. For polled mode during boot, if the status appears to be already complete before beginning the check loop, it waits 10 us before actually checking the status, just in case the EC is really slow and hasn't gotten to work on the new request yet. - Use upper-case hex for the _Qxx method - Use device_printf for errors, don't hide them under verbose - Increase default total timeout to 750 ms and decrease polling interval to 5 us. - Don't pass the status value via the softc. Just read it directly. - Remove the mutex. We use the sx lock for transaction serialization with the query handler. - Remove the Intel copyright notice as no code of theirs was ever present in this file (verified against rev 1.1) - Allow KTR module-only builds for ease of testing
Thanks to jkim and Alexey Starikovskiy for helpful discussions and testing.
Approved by: re MFC after: 2 weeks
|
172153 |
13-Sep-2007 |
njl |
Reject requests to start or ack a suspend sequence on platforms that do not support suspend/resume, currently all except i386.
Tested by: jkim Approved by: re
|
172022 |
30-Aug-2007 |
njl |
Evaluate _OSC on boot to indicate our OS capabilities to ACPI. This is needed at least to convince the BIOS to give us access to CPU freq control on MacBooks.
Submitted by: Rui Paulo <rpaulo / fnop.net> Approved by: re MFC after: 5 days
|
171657 |
30-Jul-2007 |
njl |
Dynamically choose the quality of the ACPI timer depending on whether the fast or safe/slow method is in use. Fast remains at 1000, slow is now at 850 (always preferred to TSC). Since the HPET has proven slower than ACPI-fast on some systems, drop its quality to 900. In the future, it is hoped that HPET performance will improve as it is the main timer Intel supports. HPET may move back to 2000 in -current once RELENG_7 is branched to ensure that it gets tested.
Approved by: re
|
171547 |
22-Jul-2007 |
njl |
The HPET appears to be broken on silby's Acer Pentium M system, never advancing. Read from the timer before attaching to be sure it advances in 1 us. Since the slowest rate allowed by the spec is 10 MHz, the timer is guaranteed to change in this interval if it is working.
Tested by: Rui Paulo Approved by: re MFC after: 3 days
|
171119 |
30-Jun-2007 |
njl |
My previous commit introduced a spurious warning for the case where a switch (i.e. lid) is set to have an action of NONE. This is not an invalid state, so silently return. This fixes the warning: "acpi: request to enter state S6 failed (err 22)"
Approved by: re
|
170976 |
21-Jun-2007 |
njl |
Update the suspend/resume user API while maintaining backwards compat.
Improvements: * /etc/rc.suspend,rc.resume are always run, no matter the source of the suspend request (user or kernel, apm or acpi) * suspend now requires positive user acknowledgement. If a user program wants to cancel the suspend, they can. If one of the user programs hangs or doesn't respond within 10 seconds, the system suspends anyway. * /dev/apm is clonable, allowing multiple listeners for suspend events. In the future, xorg-server can use this to be informed about suspend even if there are other listeners (i.e. apmd).
Changes: * Two new ACPI ioctls: REQSLPSTATE and ACKSLPSTATE. Request begins the process of suspending by notifying all listeners. acpi is monitored by devd(8) and /dev/apm listener(s) are also counted. Users register their approval or disapproval via Ack. If anyone disapproves, suspend is vetoed. * Old user programs or kernel modules that used SETSLPSTATE continue to work. A message is printed once that this interface is deprecated. * acpiconf gains the -k flag to ack the suspend request. This flag is undocumented on purpose since it's only used by /etc/rc.suspend. It is not intended to be a permanent change and will be removed once a better power API is implemented. * S5 (power off) is no longer supported via acpiconf -s 5 or apm -z/-Z. This restores previous behavior of halt/shutdown -p being the interface. * Miscellaneous improvements to error reporting
Approved by: re
|
170783 |
15-Jun-2007 |
njl |
Convert magic to a uintptr_t. This should get rid of some warnings on gcc4.
|
170289 |
04-Jun-2007 |
dwmalone |
Despite several examples in the kernel, the third argument of sysctl_handle_int is not sizeof the int type you want to export. The type must always be an int or an unsigned int.
Remove the instances where a sizeof(variable) is passed to stop people accidently cut and pasting these examples.
In a few places this was sysctl_handle_int was being used on 64 bit types, which would truncate the value to be exported. In these cases use sysctl_handle_quad to export them and change the format to Q so that sysctl(1) can still print them.
|
170228 |
03-Jun-2007 |
njl |
Disable CPU idle states during suspend and reenable them during resume. While in the suspend path, this means the idle thread will just return immediately rather than trying to enter C1-n. This helps in the case where the chipset is powered down before the rest of the system and reads from the cpu sleep registers begin returning immediately, causing the logic that catches bad C2/C3 behavior to kick in. Observed on my Panasonic Y4.
MFC after: 3 days
|
170214 |
02-Jun-2007 |
njl |
Fix a bug introduced in the per-CPU Cx states commit. The wrong loop var (j/i) was being used and it was being incremented, not decremented as before. Factor out this code into a common function and call it from both the common and per-CPU case.
MFC after: 1 day
|
170211 |
02-Jun-2007 |
njl |
AcpiAcquireGlobalLock() can sometimes sleep if the mutex is contested. The global lock is a memory region shared with the BIOS and thus has some strange behavior like the fact that the sleep is 1 ms max. We use standard mutexes to synchronize with the SCI so acquiring the global lock after locking the mutex resulted in a witness warning.
To deal with this for now, acquire the global lock before all other locks, similar to Giant. This should fix the witness "sleeping with mutex held" issue on boot that occurred after the last ACPI-CA import. In the future, we hope to move to the new mutex interface in ACPI-CA instead of the pseudo-semaphore version we have now.
Reviewed by: jkim
|
170148 |
31-May-2007 |
takawata |
Use ACPICA defined value for notification rather than locally defined one.
|
170143 |
31-May-2007 |
njl |
Remove "acpi_bus_number: can't get _ADR" message. It usually appears as we traverse \_SB and \ in the namespace, which won't have _ADR anyway. Use a proper extern instead of our own private copy.
MFC after: 1 week
|
169973 |
25-May-2007 |
njl |
Add a sysctl, 'debug.acpi.suspend_bounce', that causes the system to bounce back in a simulated resume instead of entering the requested suspend state. This helps in testing drivers separately from the acpi suspend code. To test your drivers, set debug.acpi.suspend_bounce=1 and then run acpiconf -s3 (or 4).
MFC after: 1 day
|
169592 |
16-May-2007 |
njl |
Fix a logic bug added in last commit where PNP0103 devices would no longer be probed but table-based devs would be ok. General style cleanup also.
MFC after: 5 days
|
169574 |
15-May-2007 |
takawata |
Add ACPI HPET table support.
Reviewed by:njl
|
169377 |
08-May-2007 |
marks |
Set the debug.acpi.acpi_ca_version sysctl even if ACPI support is not available.
|
169221 |
02-May-2007 |
jhb |
Revamp the MSI/MSI-X code a bit to achieve two main goals: - Simplify the amount of work that has be done for each architecture by pushing more of the truly MI code down into the PCI bus driver. - Don't bind MSI-X indicies to IRQs so that we can allow a driver to map multiple MSI-X messages into a single IRQ when handling a message shortage.
The changes include: - Add a new pcib_if method: PCIB_MAP_MSI() which is called by the PCI bus to calculate the address and data values for a given MSI/MSI-X IRQ. The x86 nexus drivers map this into a call to a new 'msi_map()' function in msi.c that does the mapping. - Retire the pcib_if method PCIB_REMAP_MSIX() and remove the 'index' parameter from PCIB_ALLOC_MSIX(). MD code no longer has any knowledge of the MSI-X index for a given MSI-X IRQ. - The PCI bus driver now stores more MSI-X state in a child's ivars. Specifically, it now stores an array of IRQs (called "message vectors" in the code) that have associated address and data values, and a small virtual version of the MSI-X table that specifies the message vector that a given MSI-X table entry uses. Sparse mappings are permitted in the virtual table. - The PCI bus driver now configures the MSI and MSI-X address/data registers directly via custom bus_setup_intr() and bus_teardown_intr() methods. pci_setup_intr() invokes PCIB_MAP_MSI() to determine the address and data values for a given message as needed. The MD code no longer has to call back down into the PCI bus code to set these values from the nexus' bus_setup_intr() handler. - The PCI bus code provides a callout (pci_remap_msi_irq()) that the MD code can call to force the PCI bus to re-invoke PCIB_MAP_MSI() to get new values of the address and data fields for a given IRQ. The x86 MSI code uses this when an MSI IRQ is moved to a different CPU, requiring a new value of the 'address' field. - The x86 MSI psuedo-driver loses a lot of code, and in fact the separate MSI/MSI-X pseudo-PICs are collapsed down into a single MSI PIC driver since the only remaining diff between the two is a substring in a bootverbose printf. - The PCI bus driver will now restore MSI-X state (including programming entries in the MSI-X table) on device resume. - The interface for pci_remap_msix() has changed. Instead of accepting indices for the allocated vectors, it accepts a mini-virtual table (with a new length parameter). This table is an array of u_ints, where each value specifies which allocated message vector to use for the corresponding MSI-X message. A vector of 0 forces a message to not have an associated IRQ. The device may choose to only use some of the IRQs assigned, in which case the unused IRQs must be at the "end" and will be released back to the system. This allows a driver to use the same remap table for different shortage values. For example, if a driver wants 4 messages, it can use the same remap table (which only uses the first two messages) for the cases when it only gets 2 or 3 messages and in the latter case the PCI bus will release the 3rd IRQ back to the system.
MFC after: 1 month
|
169039 |
25-Apr-2007 |
jhb |
Use a tighter check to see if a resource allocation request is for a specific request and thus should first try to be allocated from the sys_resource pool. This avoids using the sys_resource pool for wildcard requests that have bounded ranges coming from cbb(4) and Host-PCI pcib(4) drivers.
Tested by: Andrea Bittau <a.bittau of cs.ucl.ac.uk fame> Sleuthing by: Andrea Bittau as well
|
168191 |
31-Mar-2007 |
jhb |
Optimize sx locks to use simple atomic operations for the common cases of obtaining and releasing shared and exclusive locks. The algorithms for manipulating the lock cookie are very similar to that rwlocks. This patch also adds support for exclusive locks using the same algorithm as mutexes.
A new sx_init_flags() function has been added so that optional flags can be specified to alter a given locks behavior. The flags include SX_DUPOK, SX_NOWITNESS, SX_NOPROFILE, and SX_QUITE which are all identical in nature to the similar flags for mutexes.
Adaptive spinning on select locks may be enabled by enabling the ADAPTIVE_SX kernel option. Only locks initialized with the SX_ADAPTIVESPIN flag via sx_init_flags() will adaptively spin.
The common cases for sx_slock(), sx_sunlock(), sx_xlock(), and sx_xunlock() are now performed inline in non-debug kernels. As a result, <sys/sx.h> now requires <sys/lock.h> to be included prior to <sys/sx.h>.
The new kernel option SX_NOINLINE can be used to disable the aforementioned inlining in non-debug kernels.
The size of struct sx has changed, so the kernel ABI is probably greatly disturbed.
MFC after: 1 month Submitted by: attilio Tested by: kris, pjd
|
168010 |
28-Mar-2007 |
njl |
Re-enable the HPET timer after a resume.
Submitted by: Andrea Bittau <a.bittau@cs.ucl.ac.uk> MFC after: 3 days
|
167918 |
26-Mar-2007 |
jkim |
- Use '*h' instead of 'struct acpi_spinlock' for sizeof[1]. - Add a missing 'else' for 'if'[2].
Requested by: njl[1] Submitted by: njl[2]
|
167915 |
26-Mar-2007 |
jkim |
Correct ACPI semaphore function parameters.
|
167911 |
26-Mar-2007 |
jkim |
Free the handle, not the lock. Pointy hat to me.
|
167910 |
26-Mar-2007 |
jkim |
Correct ACPI spinlock function parameters and use known ACPI spinlock names.
|
167908 |
26-Mar-2007 |
njl |
Use a unique name for each mutex now that acpi-ca is creating more than one (hardware & global lock). This should address witness complaints that a duplicate mutex is being acquired. Be sure to free the mutex to fix a potential memory leak.
MFC after: 3 days
|
167814 |
22-Mar-2007 |
jkim |
Catch up with ACPI-CA 20070320 import.
|
167768 |
21-Mar-2007 |
jhb |
Change acpi's handling of suballocating system resources to be a little simpler. It now can just use rman_is_region_manager() during acpi_release_resource() to see if the the resource is suballocated from a system resource. Also, the driver no longer needs MD knowledge about how to setup bus space tags and handles when doing a suballocation, but can simply rely on bus_activate_resource() in the parent setting all that up.
|
167742 |
20-Mar-2007 |
jhb |
Tweak the probe/attach order of devices on the x86 nexus devices. Various BIOS-related psuedo-devices are added at an order of 5. acpi0 is added at an order of 10, and legacy0 is added at an order of 11.
|
167730 |
20-Mar-2007 |
njl |
If we got an OBE/IBF event, we failed to re-enable the GPE. This would cause the EC to stop handling future events because the GPE stayed masked. Set a flag when queueing a GPE handler since it will ultimately re-enable the GPE. In all other cases, re-enable it ourselves. I reworked the patch from the submitter.
Submitted by: Rong-en Fan <grafan@gmail.com>
|
167671 |
18-Mar-2007 |
njl |
Disable burst mode by default. Testing has shown that while it works on most systems, it causes the EC not to respond for some Acer and Compaq/HP laptops. This is the default value for Linux also. For systems that need it, burst mode can be enabled via the tunable/sysctl: debug.acpi.ec.burst="1"
|
167573 |
14-Mar-2007 |
njl |
Only enter the debugger on a Fatal op if this is a debug build of the acpi module. Also clean up print of args a little.
This was accidentally committed as 1.9.2.3 in the stable branch. Since it is harmless, I will let the "insta-MFC" stand unless there is a problem.
|
167249 |
05-Mar-2007 |
njl |
Check the _TMP value for sanity also. On some systems (HP NX laptops), the EC occasionally times out and provides bogus values (3000C). This change prevents those systems from prematurely shutting down while we work on the underlying problem. Also, bump the sanity value to 0...200C from 0...150C.
|
167044 |
27-Feb-2007 |
njl |
Rework EC I/O approach. Implement burst mode, including proper handling of case where it asynchronously exits burst mode on its own. Handle different values of hz in sleep loop. Provide more debugging options to tune EC behavior. These tunables/sysctls may be temporary and are not for user access if the EC is working properly. Burst mode is now on by default for testing and the poll interval has been increased from 100 to 500 us and total timeout from 100 to 500 ms.
Hopefully this should be the first step of addressing reports of timeout errors during battery or thermal access, especially on HP/Compaq laptops. It is reasonably stable and should not cause a loss of functionality or performance on systems that were previously working. Testing shows an increase of responsiveness by ~75% on one system.
PR: kern/98171
|
166909 |
23-Feb-2007 |
jhb |
Use 'pause' in several places rather than trying to tsleep() on NULL (which triggers a KASSERT) or local variables. In the case of kern_ndis, the tsleep() actually used a common sleep address (curproc) making it susceptible to a premature wakeup.
|
166901 |
23-Feb-2007 |
piso |
o break newbus api: add a new argument of type driver_filter_t to bus_setup_intr()
o add an int return code to all fast handlers
o retire INTR_FAST/IH_FAST
For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current
Reviewed by: many Approved by: re@
|
166881 |
22-Feb-2007 |
njl |
Improve readability of the version string.
|
166184 |
23-Jan-2007 |
njl |
Add missing function trace for debug prints.
|
166176 |
22-Jan-2007 |
jhb |
Expand the MSI/MSI-X API to address some deficiencies in the MSI-X support. - First off, device drivers really do need to know if they are allocating MSI or MSI-X messages. MSI requires allocating powerof2() messages for example where MSI-X does not. To address this, split out the MSI-X support from pci_msi_count() and pci_alloc_msi() into new driver-visible functions pci_msix_count() and pci_alloc_msix(). As a result, pci_msi_count() now just returns a count of the max supported MSI messages for the device, and pci_alloc_msi() only tries to allocate MSI messages. To get a count of the max supported MSI-X messages, use pci_msix_count(). To allocate MSI-X messages, use pci_alloc_msix(). pci_release_msi() still handles both MSI and MSI-X messages, however. As a result of this change, drivers using the existing API will only use MSI messages and will no longer try to use MSI-X messages. - Because MSI-X allows for each message to have its own data and address values (and thus does not require all of the messages to have their MD vectors allocated as a group), some devices allow for "sparse" use of MSI-X message slots. For example, if a device supports 8 messages but the OS is only able to allocate 2 messages, the device may make the best use of 2 IRQs if it enables the messages at slots 1 and 4 rather than default of using the first N slots (or indicies) at 1 and 2. To support this, add a new pci_remap_msix() function that a driver may call after a successful pci_alloc_msix() (but before allocating any of the SYS_RES_IRQ resources) to allow the allocated IRQ resources to be assigned to different message indices. For example, from the earlier example, after pci_alloc_msix() returned a value of 2, the driver would call pci_remap_msix() passing in array of integers { 1, 4 } as the new message indices to use. The rid's for the SYS_RES_IRQ resources will always match the message indices. Thus, after the call to pci_remap_msix() the driver would be able to access the first message in slot 1 at SYS_RES_IRQ rid 1, and the second message at slot 4 at SYS_RES_IRQ rid 4. Note that the message slots/indices are 1-based rather than 0-based so that they will always correspond to the rid values (SYS_RES_IRQ rid 0 is reserved for the legacy INTx interrupt). To support this API, a new PCIB_REMAP_MSIX() method was added to the pcib interface to change the message index for a single IRQ.
Tested by: scottl
|
166027 |
15-Jan-2007 |
njl |
Clean up some debug prints from last commit and move one under boot -v. Reminded by: bruno
|
165882 |
08-Jan-2007 |
njl |
Fix LINT and ACPI_DEBUG builds and add print for use of flush cache inst.
|
165875 |
07-Jan-2007 |
njl |
Re-work Cx handling to be per-cpu and asymmetrical, fixing support on modern dual-core systems as well.
- Parse the _CST packages for each cpu and track all the states individually, on a per-cpu basis.
- Revert to generic FADT/P_BLK based Cx control if the _CST package is not present on all cpus. In that case, the new driver will still support per-cpu Cx state handling. The driver will determine the highest Cx level that can be supported by all the cpus and configure the available Cx state based on that.
- Fixed the case where multiple cpus in the system share the same registers for Cx state handling. To do that, added a new flag parameter to the acpi_PkgGas and acpi_bus_alloc_gas functions that enable the caller to add the RF_SHAREABLE flag. This flag could also be useful to other callers (acpi_throttle?) in the tree but this change is not yet made.
- For Core Duo cpus, both cores seems to be taken out of C3 state when any one of the cores need to transition out. This broke the short sleep detection logic. It is disabled now if there is more than one cpu in the system for now as it fixed it in my case. This quirk may need to be re-enabled later differently.
- Added support to control cx_lowest on a per-cpu basis. There is still a generic cx_lowest to enable changing cx_lowest for all cpus with a single sysctl and for ease of use. Sample output for the new sysctl:
dev.cpu.0.cx_supported: C1/1 C2/1 C3/57 dev.cpu.0.cx_lowest: C3 dev.cpu.0.cx_usage: 0.00% 43.16% 56.83% dev.cpu.1.cx_supported: C1/1 C2/1 C3/57 dev.cpu.1.cx_lowest: C3 dev.cpu.1.cx_usage: 0.00% 45.65% 54.34% hw.acpi.cpu.cx_lowest: C3
This work was done by Stephane E. Potvin with some simple reworking by myself. Thank you.
Submitted by: Stephane E. Potvin <sepotvin / videotron.ca> MFC after: 2 weeks
|
165457 |
22-Dec-2006 |
imp |
ACPIIO_BATT_GET_UNITS would always return ENXIO. However, it should never return an error since it returns a count of battery devices in the system. Set it to 0 explicitly, since it is the only switch branch that doesn't set it.
# I guess no one uses it.
|
165128 |
12-Dec-2006 |
jhb |
Give Host-PCI bridge drivers their own pcib_alloc_msi() and pcib_alloc_msix() methods instead of using the method from the generic PCI-PCI bridge driver as the PCI-PCI methods will be gaining some PCI-PCI specific logic soon.
|
164264 |
13-Nov-2006 |
jhb |
First cut at MI support for PCI Message Signalled Interrupts (MSI): - Add 3 new functions to the pci_if interface along with suitable wrappers to provide the device driver visible API: - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count' here is an in and out parameter. The driver stores the desired number of messages in '*count' before calling the function. On success, '*count' holds the number of messages allocated to the device. Also on success, the driver can access the messages as SYS_RES_IRQ resources starting at rid 1. Note that the legacy INTx interrupt resource will not be available when using MSI. Note that this function will allocate either MSI or MSI-X messages depending on the devices capabilities and the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note that the driver should activate the memory resource that holds the MSI-X table and pending bit array (PBA) before calling this function if the device supports MSI-X. - pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function releases the messages allocated for this device. All of the SYS_RES_IRQ resources need to be released for this function to succeed. - pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns the maximum number of MSI or MSI-X messages supported by this device. MSI-X is preferred if present, but this function will honor the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function should return the largest value that pci_alloc_msi() can return (assuming the MD code is able to allocate sufficient backing resources for all of the messages). - Add default implementations for these 3 methods to the pci_driver generic PCI bus driver. (The various other PCI bus drivers such as for ACPI and OFW will inherit these default implementations.) This default implementation depends on 4 new pcib_if methods that bubble up through the PCI bridges to the MD code to allocate IRQ values and perform any needed MD setup code needed: - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages. - PCIB_RELEASE_MSI() releases a group of MSI messages. - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message. - PCIB_RELEASE_MSIX() releases a single MSI-X message. - Add default implementations for these 4 methods that just pass the request up to the parent bus's parent bridge driver and use the default implementation in the various MI PCI bridge drivers. - Add MI functions for use by MD code when managing MSI and MSI-X interrupts: - pci_enable_msi(dev, address, data) programs the MSI capability address and data registers for a group of MSI messages - pci_enable_msix(dev, index, address, data) initializes a single MSI-X message in the MSI-X table - pci_mask_msix(dev, index) masks a single MSI-X message - pci_unmask_msix(dev, index) unmasks a single MSI-X message - pci_pending_msix(dev, index) returns true if the specified MSI-X message is currently pending - Save the MSI capability address and data registers in the pci_cfgreg block in a PCI devices ivars and restore the values when a device is resumed. Note that the MSI-X table is not currently restored during resume. - Add constants for MSI-X register offsets and fields. - Record interesting data about any MSI-X capability blocks we come across in the pci_cfgreg block in the ivars for PCI devices.
Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X) Reviewed by: scottl, grehan, jfv MFC after: 2 months
|
164128 |
09-Nov-2006 |
jhb |
Reformat the bootverbose messages that dump out the status of pci_link devices during attach to be more compact.
MFC after: 1 week
|
162597 |
24-Sep-2006 |
hrs |
Disable an overly-verbose warning message by default.
Suggested by: njl MFC after: 3 days
|
162531 |
21-Sep-2006 |
jhb |
Fix a sign bug in acpi_release_resource(). acpi_sysres_find() returns != NULL if the specified resource is a sub-alloc of a system resource.
|
162225 |
11-Sep-2006 |
jhb |
Give the ACPI I/O rman's unique description strings to make 'devinfo -u' output less confusing.
MFC after: 3 days
|
161951 |
03-Sep-2006 |
ume |
Support Celsius (nn.nC), Fahrenheit (nn.nF) and Kelvin (nnnn) to specify temperature.
Reviewed by: njl MFC after: 3 days
|
161223 |
11-Aug-2006 |
jhb |
First pass at allowing memory to be mapped using cache modes other than WB (write-back) on x86 via control bits in PTEs and PDEs (including making use of the PAT MSR). Changes include: - A new pmap_mapdev_attr() function for amd64 and i386 which takes an additional parameter (relative to pmap_mapdev()) specifying the cache mode for this mapping. Note that on amd64 only WB mappings are done with the direct map, all other modes result in a private mapping. - pmap_mapdev() on i386 and amd64 now defaults to using UC (uncached) mappings rather than WB. Previously we relied on the BIOS setting up MTRR's to enforce memio regions being treated as UC. This might make hw.cbb_start_memory unnecessary in some cases now for example. - A new pmap_mapbios()/pmap_unmapbios() API has been added to allow places that used pmap_mapdev() to map non-device memory (such as ACPI tables) to do so using WB as before. - A new pmap_change_attr() function for amd64 and i386 that changes the caching mode for a range of KVA.
Reviewed by: alc
|
161211 |
11-Aug-2006 |
des |
Raise the quality of the HPET timer to 2000 so it will be the preferred choice on systems which support it.
No objection by: phk
|
161184 |
10-Aug-2006 |
bruno |
Improve the way we'll detect video devices as per ACPI 3.0.
PR: 100271 Requested by: john AT utzweb DOT net Submitted by: hrs Reviewed by: njl Approved by: njl MFC after: 3 days
|
161065 |
08-Aug-2006 |
njl |
Remove the global dock variable. Each dock device should be able to function independently. This change is not only load-tested since I don't have hardware that supports acpi_dock. Clean up comments and a name a few constants.
|
161051 |
07-Aug-2006 |
jhb |
When a user uses a hint to specify the IRQ for a link device, accept IRQs that aren't listed as valid in the link device's set of possible IRQs. This allows the hints to be used to work around broken BIOSes that don't specify the correct ste of possible IRQs. A warning is issued in the dmesg in this case to be consistent with the $PIR handling code.
MFC after: 1 week
|
160824 |
29-Jul-2006 |
njl |
Add a new sysctl, hw.acpi.handle_reboot. If set, acpi will attempt to perform the reboot action via the reset register instead of our legacy method. Default is 0 (use legacy). This is needed because some systems hang on reboot even though they claim to support the reset register.
MFC after: 2 days
|
160657 |
25-Jul-2006 |
njl |
Add support for overriding the values for _CRT, _HOT, and _PSV via sysctl. Prevent casual modification by requiring hw.acpi.thermal.user_override to be set first. Fix printing of negative temperatures in the K->C conversion. Document the remaining thermal sysctls.
MFC after: 3 days
|
160381 |
15-Jul-2006 |
bruno |
Eliminate duplicate p-states entries
Reported and tested by: ales dot rom at kabelnet dot net Reviewed by: njl Approved by: njl, imp (mentor) MFC after: 3 days
|
159855 |
22-Jun-2006 |
njl |
Clean up style and some printf messages. Note that returning anything other than 0 for probe seems to cause a panic somewhere in sysctl kern.
|
159543 |
12-Jun-2006 |
njl |
Check in file missed in last commit. It made it into the MFC properly though.
|
159524 |
11-Jun-2006 |
njl |
By default, don't disable ACPI during reboot. This appears to hang some systems. Introduce a new sysctl "hw.acpi.disable_on_reboot" that allows users to re-enable the old behavior in case it's needed for some systems. We never disable in the power-off path.
Original approach submitted by Alexander Logvinov <abuse@akavia.ru> with reworking by Jung-uk Kim and myself.
|
159476 |
10-Jun-2006 |
njl |
Minor sysctl cleanup. The RW flag means read|write and so it is redundant to add the RD flag. Also, the debug node does not need to be writable.
|
159217 |
04-Jun-2006 |
njl |
Clean up many of the debugging messages and move them under bootverbose. Move the code for printing timer statistics into a test function instead of an ifdef (accessible via the debug.acpi.hpet_test tunable). Also use defines for register offsets instead of magic values.
Courtesy of: slow flight to HK
|
158651 |
16-May-2006 |
phk |
Since DELAY() was moved, most <machine/clock.h> #includes have been unnecessary.
|
158457 |
11-May-2006 |
jhb |
Fixup some comments to allow for the fact that PCI domains are not specific to Alpha hoses.
|
158346 |
07-May-2006 |
njl |
Don't attach special devices in the order they appear in the AML tree. If the embedded controller exists before the sysresource devices, for example, it will be attached first. Instead, let the normal device order function work as we first desired. [1]
There still remained a problem where we couldn't allocate resources in acpi0 that were passed up by the sysresource pseudo-devices. These devices had to probe/attach first to give their resources to acpi, then acpi would allocate them before probing/attaching other devices. To work around this, we attach them from acpi_sysres_alloc(). A better approach would be to implement multi-pass probe/attach in newbus but that's a much bigger task.
Suggested by: jhb [1] Hardware from: Centaur Technologies MFC after: 1 week
|
157947 |
21-Apr-2006 |
jkim |
Remove unnecessary assignment.
Coverity ID: 553 Found by: Coverity Prevent
|
157897 |
20-Apr-2006 |
imp |
Set the rid for the resoruce obtained from rman_reserve_resource.
|
157792 |
16-Apr-2006 |
maxim |
o Correct a path to include.
|
157778 |
15-Apr-2006 |
iwasaki |
Oops, untested code was included accidentally. Fixed.
|
157774 |
15-Apr-2006 |
iwasaki |
Import ACPI Dock Station support. Note that this is still very young. Additional detach implementaions (or maybe improvement) for other deivce drivers is required.
Reviewed by: njl, imp MFC after: 1 week
|
157452 |
04-Apr-2006 |
njl |
Fix an off-by-one error in the port range detection. Cleanup some old whitespace.
|
157307 |
30-Mar-2006 |
scottl |
Revert to using acpi_max_threads instead of the hardcoded value of '3'.
|
157269 |
29-Mar-2006 |
njl |
Fix printf arg on 64-bit arch by casting to an int. The IO port is never more than a couple digits anyway.
Pointy hat to: njl
|
157245 |
29-Mar-2006 |
njl |
Add a blacklist for bad IO ports that AML should never touch. It seems some systems were designed so that AML writes to various resources shared with OS drivers, including the RTC, PIC, PCI, etc. These writes could collide with writes by the OS and should never be performed. For now, we print a message if such an access occurs, but do not block it. To block the access, the tunable "debug.acpi.block_bad_io" can be set to 1. In the future, we will flip the switch and this will become the default.
Information about this problem was found in Microsoft KB 283649. They block IO accesses if the BIOS indicates via _OSI that it is Windows 2001 or higher. They always block accesses to the PIC, cascaded PIC, and ELCRs, no matter how old the BIOS.
|
157244 |
29-Mar-2006 |
njl |
Add reset register support. This is the only method to reboot some new systems (blade servers). On most systems, this is implemented as an IO write to the SMI port and the BIOS generates the actual reset.
PR: kern/94939 Submitted by: dodell@ixsystems.com Reviewed by: jhb MFC after: 3 weeks
|
155869 |
21-Feb-2006 |
njl |
Remove unused variable.
Coverity ID: 548 Found by: Coverity Prevent
|
155868 |
21-Feb-2006 |
njl |
Remove unused variable.
Coverity ID: 546 Found by: Coverity Prevent
|
154600 |
20-Jan-2006 |
jhb |
Make the ACPI and OpenFirmware PCI bus drivers subclasses of the generic PCI bus driver.
|
154333 |
14-Jan-2006 |
scottl |
Add the following to the taskqueue api:
taskqueue_start_threads(struct taskqueue **, int count, int pri, const char *name, ...);
This allows the creation of 1 or more threads that will service a single taskqueue. Also rework the taskqueue_create() API to remove the API change that was introduced a while back. Creating a taskqueue doesn't rely on the presence of a process structure, and the proc mechanics are much better encapsulated in taskqueue_start_threads(). Also clean up the taskqueue_terminate() and taskqueue_free() functions to safely drain pending tasks and remove all associated threads.
The TASKQUEUE_DEFINE and TASKQUEUE_DEFINE_THREAD macros have been changed to use the new API, but drivers compiled against the old definitions will still work. Thus, recompiling drivers is not a strict requirement.
|
154273 |
12-Jan-2006 |
bruno |
* fix bst.status. We mark some bits, but forgot to reset all of them before. The symptom is that the battery inform us its charge and discharge at the same time...
* fix bst.rate to correctly output the (dis)charging rate. We'll use the current average over one minute command and not the at_rate command. Note that this method is not correct if the capacity_mode is set, but since we don't set it ourself, it is not a problem.
The at_rate do not give the actual rate but is used to compute the estimated time for (dis)charging a battery. We should actually write an estimation of the actual rate using at_rate cmd and then perform a read to the various estimators.
Approved by: njl MFC after: 2 days
|
154079 |
06-Jan-2006 |
jhb |
- Make pcib_devclass private to sys/dev/pci/pci_pci.c and change all the various pcib drivers to use their own private devclass_t variables for their modules. - Use the DEFINE_CLASS_0() macro to declare drivers for the various pcib drivers while I'm here.
|
154071 |
06-Jan-2006 |
jhb |
Be a little more forgiving of lame BIOS writers. If a link device that doesn't have any actual interrupts is listed in a _PRT entry, only print a warning rather than panic'ing when we walk the _PRT's to build up count of entries that reference a given link (the counts are used as weights so that we can attempt to balance the load across IRQs used by link devices). Instead, only panic if we attempt to use the _PRT entry to route an interrupt for a device.
PR: i386/89545 Tested by: anders
|
153994 |
03-Jan-2006 |
jhb |
Release the pci_link acpi serial lock if a link device has no actual links.
MFC after: 3 days
|
153706 |
24-Dec-2005 |
trhodes |
Make tv_sec a time_t on all platforms but alpha. Brings us more in line with POSIX. This also makes the struct correct we ever implement an i386-time64 architecture. Not that we need too.
Reviewed by: imp, brooks Approved by: njl (acpica), des (no objects, touches procfs) Tested with: make universe
|
153578 |
20-Dec-2005 |
jhb |
Attach to the vgapci device rather than pci.
|
153560 |
20-Dec-2005 |
jhb |
Add a new method PCI_FIND_EXTCAP() to the pci bus interface that is used to search for a specific extended capability. If the specified capability is found for the given device, then the function returns success and optionally returns the offset of that capability. If the capability is not found, the function returns an error.
|
153336 |
12-Dec-2005 |
bruno |
Don't flood kernel logs with "invalid _PSS package" messages.
Approved by: njl, imp (mentor)
|
153172 |
06-Dec-2005 |
njl |
Revert two changes I was testing regarding polling delay.
|
153171 |
06-Dec-2005 |
njl |
Add KTR support and move some performance debugging variables in the EC to KTR. We're reusing the KTR_DEV level.
|
153122 |
05-Dec-2005 |
jhb |
If pci_link has been disabled via the acpi_disable tunable, then bail immediately from acpi_pci_link_route_interrupt() since we aren't going to have a valid pci_link device to talk to try to route interrupts. This fixes a page fault if you disable just pci_link. Note that trying to use ACPI without pci_link is probably not advised however.
MFC after: 1 week Tested by: Eugene Grosbein eugen at kuzbass dot ru
|
153066 |
03-Dec-2005 |
jhb |
Force any hardwire-routed interrupts to level trigger and active low polarity. Some machines route PCI IRQs to an ISA IRQ but fail to include an interrupt override entry to set the polarity and trigger of the given ISA IRQ in their MADT table.
PR: usb/74989 Reported by: Julien Gabel jpeg at thilelli dot net MFC after: 1 week
|
153016 |
02-Dec-2005 |
jhb |
Add a missing newline to a printf.
MFC after: 1 week
|
152818 |
26-Nov-2005 |
njl |
Add a locking stub to call acpi_cmbat_get_bif() now that it is directly run from the taskqueue. There should probably be a better way to do this later, but this suffices for now.
Submitted by: yongari
|
152744 |
24-Nov-2005 |
njl |
Only copy out the battery status/info if there was no error.
|
152719 |
23-Nov-2005 |
jhb |
- Quiet the pci_link(4) devices so that they don't show up in dmesg now. - Improve panic message if we fail to read the PCI bus number from a bridge device. - Don't try to lookup a BIOS IRQ for a link unless the link is routed via an ISA IRQ since BIOSen currently only route PCI link devices via ISA IRQs.
Tested by: Mathieu Prevot bsdhack at club-internet dot fr MFC after: 1 week
|
152705 |
23-Nov-2005 |
njl |
Try to fix problems with periodic hangs by never directly calling _BIF. Instead, re-evaluate _BIF only when we get a notify and use the cached results. We also still evaluate _BIF once on boot. Also, optimize the init loop a little by only querying for a particular info if it's not valid.
MFC after: 2 days
|
152703 |
23-Nov-2005 |
njl |
Simplify checks for valid battery info via DeMorgan's Rule. No functional change.
|
152677 |
22-Nov-2005 |
ume |
Cache the result of battery info retrieval from smbat as well as cmbat.
Reviewed by: njl MFC after: 3 days
|
152667 |
21-Nov-2005 |
jhb |
Fix the code to look up the BIOS IRQ for a given link device by reading the IRQ set by the BIOS in existing devices to actually get the correct bus number of the child PCI bus. I was not reading the bus number from the bridge device correctly. The __BUS_ACCESSOR() macros (from which pcib_get_bus() is built) assume that the passed in argument is a child device. However, at the time I'm reading the bus there is no child device yet, so I was passing in the pcib device as the child device. The parent of the pcib device probably returned an error in the case of a host bridge, thus resulting in random stack garbage for the bus number. For PCI-PCI bridges, the bus number being used was actually the subvendor of the PCI-PCI bridge device itself.
MFC after: 1 week
|
152171 |
07-Nov-2005 |
jhb |
*sigh* Revert stuff that wasn't supposed to be committed. The acpi_resource change was a minor nit offered as an early candidate for the recent ACPICA import problem and the acpi.c change is one I need to test still that makes the ordered probing of system devices actually work as advertised (probe devices in order based on the type of device rather than in the order we encounter them in the device tree).
|
152170 |
07-Nov-2005 |
jhb |
Work around at least one busted BIOS. If we get a source index in a _PRT entry that is not zero, assume that it is really a hard-wired IRQ (commonly used for APIC routing) and not a source index. In practice, we've only ever seen source indices of 0 for legitimate non-hard-wired _PRT entries.
Reviewed by: njl Tested by: Alex Lyashkov shadow at psoft dot net MFC after: 2 weeks
|
151948 |
01-Nov-2005 |
jkim |
Catch up with ACPI-CA 20051021 import
|
151935 |
01-Nov-2005 |
scottl |
Move HPET debugging under ACPI_TIMER in order to save a bitfield.
|
151931 |
01-Nov-2005 |
scottl |
Add proper debugging infrastructure for acpi_hpet.c.
|
151912 |
31-Oct-2005 |
phk |
Add a basic HPET timecounter.
It has -200 quality for now so it will not get automatically selected.
|
151897 |
31-Oct-2005 |
rwatson |
Normalize a significant number of kernel malloc type names:
- Prefer '_' to ' ', as it results in more easily parsed results in memory monitoring tools such as vmstat.
- Remove punctuation that is incompatible with using memory type names as file names, such as '/' characters.
- Disambiguate some collisions by adding subsystem prefixes to some memory types.
- Generally prefer lower case to upper case.
- If the same type is defined in multiple architecture directories, attempt to use the same name in additional cases.
Not all instances were caught in this change, so more work is required to finish this conversion. Similar changes are required for UMA zone names.
|
151678 |
25-Oct-2005 |
njl |
If we're trying to use C2/3 and reads from the register are returning immediately, back off to the next higher Cx sleep state. Some machines with a Via chipset report a valid C3 but a register read doesn't actually halt the CPU. This would cause the machine to appear unresponsive as it repeatedly called cpu_idle() which immediately returned. Causing interrupts (i.e. by pressing the power button) would cause the system to make forward progress, showing that it wasn't actually hung.
Also, enable interrupts a little earlier. We don't need them disabled to calculate the delta time for the read.
Reported by: silby MFC after: 2 weeks
|
151627 |
24-Oct-2005 |
njl |
Invert the check logic. No functional change, but I prefer this version.
|
151610 |
24-Oct-2005 |
njl |
If no AC line devices are found, go ahead and notify devd that the system is on AC power (i.e. not a laptop). This allows power_profile to run once for desktop systems as well, for instance, to set C3 or CPU frequency.
MFC after: 2 weeks
|
151591 |
23-Oct-2005 |
njl |
Add prototype to be consistent.
|
151566 |
23-Oct-2005 |
njl |
Add a hack to get around PCI link devices that report "present" but not "functional" (i.e., if they are disabled). We should probe them anyway since we may enable them later.
Tested by: thompsa MFC after: 3 days
|
151564 |
23-Oct-2005 |
njl |
Import ACPI smart battery support. Newer systems (Acer, mostly) do not support the CM-battery interface. Smart batteries can eventually be supported without ACPI via a separate SMBus interface. The ACPI interface uses the embedded controller for reading/writing to the SMBus, and normal ASL definitions for locating the battery controller (since SMBus can't be enumerated.) Also import definitions for the smart battery interface.
This was written by Hans Petter Selasky with minor cleanups from myself.
Submitted by: Hans Petter Selasky <hselasky / c2i.net>
|
151563 |
23-Oct-2005 |
njl |
Cleanups and support code for importing smart battery support.
* Use ACPI_BATT_UNKNOWN instead of constants * Use maxunit instead of a count of devices since we may have sparse battery devices in the future. Only userland should be using unit numbers anyway, so provide a translation function. (Kernel use of batteries should be restricted to looking up a device_t and calling methods directly. * Don't check acpi_BatteryIsPresent() in acpi_battery. Leave it up to the hardware-specific driver (i.e. cmbat) since smart batteries seem to not report the "battery present" flag. * Convert mA to mW if the battery uses those units. CM-batteries only used mW so this deficiency went unnoticed. * Clean strings reported in the battery info from any control chars. * Only dereference the unit from ioctl_arg if the full struct is present. Unit wouldn't have been used later if it wasn't present but this is cleaner. Translate the unit if it's not ACPI_BATTERY_ALL_UNITS. * bzero structs before returning them to usermode for future compat.
Most of this work was submitted by Hans Petter Selasky and then majorly reworked by myself.
Submitted by: Hans Petter Selasky <hselasky / c2i.net>
|
150203 |
16-Sep-2005 |
imp |
Commit a workaround to a problem with resource allocation. This helps with some Dell servers that booted w/o a problem[*] on 5.4, but failed with 6.0-BETA.
On the PCI bus, when we do lazy resource allocation, we narrow the range requested as we pass through bridges to reflect how the bridges are programmed and what addresses they pass. However, when we're doing an allocation on a bus that's directly connected to a host bridge, no such translation can take place. We already had a fallback range for memory requests, but none for ioports. As such, provide a fallback for I/O ports so we don't allocate location 0, which will have undesired side effects when the resources are actually used.
This fixes a problem with booting a Dell server with usb in the kernel. However, it is an unsatisfying solution. I don't like the hard coded value, and I think we should start narrowing the resources returned to not be in the so-called isa alias area (where the ranage & 0x0300 must be 0 iirc). Doing such filtering will have to wait for another day.
This may be a good 6 candidate, maybe after its had a chance to be refined.
Tested by: glebius@
|
150003 |
11-Sep-2005 |
obrien |
Canonize the include of acpi.h.
|
149482 |
26-Aug-2005 |
kan |
Unbreak compiles with ACPI_DEBUG.
|
149450 |
25-Aug-2005 |
ume |
get current temperature from _TMP during passive cooling is active. it makes CPU freq transition smooth.
|
149449 |
25-Aug-2005 |
ume |
initialize only ACPI_BUFFER to avoid race condition with passive cooling thread which refers psv, tc1, tc2 and tsp. The previous code made the period where sc->tz_zone.tsp was zero, and it caused panic at msleep().
Reported by: keramida Tested by: keramida
|
149201 |
17-Aug-2005 |
ume |
don't raise cpu speed over the value when passive cooling is in effect. since CPU speed is restored by degrees, we cannot use the facility of saving cpu speed by CPUFREQ_set() effectively. so, we need to save the value when passive cooling is in effect.
Repoeted by: Kevin Oberman <oberman__at__es.net>
|
148968 |
11-Aug-2005 |
njl |
Modify the fix in rev 1.16 slightly. Instead of setting the cap to zero, just skip summing it if it's unknown.
MFC after: 1 day
|
148742 |
05-Aug-2005 |
njl |
When summing capacities, skip info from batteries that weren't present. Previously, we used all info (including -1 or "not present") which would keep the system from reaching 100% when charging.
Reported by: Eric Anderson MFC after: 2 days
|
148703 |
04-Aug-2005 |
ume |
don't do mutex locking around kthread_create() call.
Reported by: Maxim Maximov <mcsi__at__mcsi.pp.ru>
|
148492 |
28-Jul-2005 |
njl |
Add descriptions for the sysctls.
MFC after: 1 day
|
148489 |
28-Jul-2005 |
njl |
Zero the _BST, _BIF, and battinfo allocations. This is needed since we later sum capacities for all batteries, even those that weren't actually present. We only need to do this for _BST but do it for all of them.
Reported by: Eric Anderson MFC after: 1 day
|
148449 |
27-Jul-2005 |
jhb |
Correct the order of some if tests so that we don't complain about being unable to route an IRQ when we do route an IRQ ok but bootverbose is off.
Reported by: Ben Kaduk minimarmot at gmail dot com
|
148400 |
25-Jul-2005 |
njl |
Correct minor output bug. When the battery being queried is charging or the overall discharge rate is 0, mark the battery remaining time as "unknown", not 0.
Reported by: Eric Kjeldergaard MFC after: 4 days
|
148352 |
23-Jul-2005 |
njl |
Rewrite the acpi_battery interface to allow for other battery types (i.e., smart battery) and fix various bugs found during the cleanup.
API changes: * kernel access: Access to individual batteries is now via devclass_find("battery"). Introduce new methods ACPI_BATT_GET_STATUS (for _BST-formatted data) and ACPI_BATT_GET_INFO (for _BIF-formatted data). The helper function acpi_battery_get_battinfo() now takes a device_t instead of a unit # argument. If dev is NULL, this signifies all batteries.
* ioctl access: The ACPIIO_BATT_GET_TYPE and ACPIIO_BATT_GET_BATTDESC ioctls have been removed. Since there is now no need for a mapping between "virtual" unit and physical unit, usermode programs can just specify the unit directly and skip the old translation steps. In fact, acpiconf(8) was actually already doing this and virtual unit was the same as physical unit in all cases since there was previously only one battery type (acpi_cmbat). Additionally, we now map the ACPIIO_BATT_GET_BIF and ACPIIO_BATT_GET_BST ioctls for all batteries, if they provide the associated methods.
* apm compatibility device/ioctls: no change * sysctl: no change
Since most third-party applications use the apm(4) compat interface, there should be very few affected applications (if any).
Reviewed by: bruno MFC after: 5 days
|
148318 |
22-Jul-2005 |
njl |
Standardize __FBSDID identifiers.
MFC after: 2 days
|
148138 |
18-Jul-2005 |
ume |
Implement passive cooling. It is enabled for tz0 by default where it is available.
Reviewed by: njl
|
147612 |
26-Jun-2005 |
dwmalone |
Add a quirk for a motherboard whose acpi timer runs too fast.
Approved by: re (scottl) Approved by: nate MFC after: 2 weeks
|
146949 |
03-Jun-2005 |
imp |
In newbus land, ivars can only be accessed for direct child, or when the driver has unholy private knowledge of its great-*cgrandchildren. The ACPI allocation routine lacked such knowledge when it tried to do a default allocation for all descendants, rather than just its immeidate children, so would access grandchild's ivar in an unsafe way. This could lead to a panic when devices were present which had no addresses setup by the BIOS, but which were later allocated in a lazy manner via pci_alloc_map. As such, only do the default allocation adjustments for immediate children. The manner that acpi_sysres_find accesses the resource list, used later in acpi_alloc_resource, is safe and proper so no additional test is needed there.
This fixes a panic when probing an disabled ata controller on some newer intel blades.
Reported by: dwhite
|
146734 |
29-May-2005 |
nyan |
Remove bus_{mem,p}io.h and related code for a micro-optimization on i386 and amd64. The optimization is a trivial on recent machines.
Reviewed by: -arch (imp, marcel, dfr)
|
146431 |
20-May-2005 |
njl |
If devclass_get_devices() returns success but a count of 0, free the pointer. If kernel malloc(0) returns a valid pointer, it needs to be freed. If it returns NULL, it's ok to free this also.
Submitted by: pjd Reviewed by: imp, dfr Obtained from: Coverity Prevent
|
146373 |
19-May-2005 |
takawata |
Use General definition for general notify.
|
146166 |
12-May-2005 |
njl |
If there is a problem during probe, be sure to free up any resources allocated for it. The normal exit case handles this correctly so we use it as well for errors.
Submitted by: pjd Obtained from: Coverity Prevent
|
146021 |
09-May-2005 |
marks |
Simplify the ACPI taskqueue implementation. Use a thread queue type instead of swi. This allows us to use the taskqueue_thread_* functions instead of rolling our own. It also avoids a double trip through the queue.
Submitted by: njl Reviewed by: sam
|
145352 |
21-Apr-2005 |
njl |
Add the tunable "debug.acpi.max_threads" to allow users to set the number of task threads to start on boot. Go back to a default of 3 threads to work around lost battery state problems. Users that need a setting of 1 can set this via the tunable. I am investigating the underlying issues and this tunable can be removed once they are solved.
MFC after: 2 days
|
145059 |
14-Apr-2005 |
marks |
Use AcpiUtStrupr() instead of strupr() as the latter will disappear in future versions of acpica.
MFC after: 2 weeks
|
145058 |
14-Apr-2005 |
jhb |
Probe PCI link devices early so that we turn them all off via _DIS before we start turning any of them back on again. This works around a bug in some BIOSen that alias two different link devices for APIC vs ATPIC modes onto the same physical hardware link.
Submitted by: njl Tested by: Antoine Brodin antoine dot brodin at laposte dot net
|
144882 |
10-Apr-2005 |
njl |
Set CPU speed to 100% in acpi_throttle attach. This is needed for some systems that boot with this value at the lowest setting. Change the default boot config back to "leave frequency as BIOS set it". Also, fix buglet where acpi_throttle wouldn't be used if p4tcc was present but disabled by the user.
MFC after: 1 week
|
144878 |
10-Apr-2005 |
njl |
Advertise that we can handle unified SMP control of processor power states, idling, etc. This has been supported since the cpufreq import.
|
144875 |
10-Apr-2005 |
njl |
Fix support for _PDC by using the proper version/length format for the buffer. Also, reference the Intel document where the _PDC values were found. This now supports ACPI-assisted SpeedStep on my borrowed T42.
|
144752 |
07-Apr-2005 |
njl |
Revert part of 1.19. We do want to set the count to 0 since otherwise it would give false info to other parts of the driver.
|
144684 |
05-Apr-2005 |
jhb |
Don't free the _PSS buffer until after we check to see if we have no valid states as otherwise we will try to free the buffer twice.
|
144629 |
04-Apr-2005 |
njl |
Add the acpi_get_features() method. This method is called on child drivers to see what features they may support before calling identify/probe/attach. This is necessary because the ACPI 3.0 spec requires driver support be advertised before running any methods. For now, the flags are as specified in for the _PDC and _OSC methods but we can support private flags as needed.
Add an implementation of this for acpi_cpu. It checks all its children (notably cpufreq drivers) and calls the _PDC method to report the results.
|
144414 |
31-Mar-2005 |
njl |
Always free the returned env pointer even it doesn't indicate we're in verbose mode.
Found by: Coverity Prevent (via sam)
|
144197 |
27-Mar-2005 |
njl |
Clean up resources properly if acpi_perf fails to attach. First, change acpi_bus_alloc_gas() to delete the resource it set if alloc fails. Then, change acpi_perf to delete the resource after releasing it if alloc fails. This should make probe and attach both fully restartable if either fails.
|
144193 |
27-Mar-2005 |
njl |
Serialize task queue by starting only one thread instead of three. This may help with various interdependencies between subsystems. More testing is needed to understand what the underlying issues are here.
Tested by: Juho Vuori MFC after: 2 days
|
144170 |
27-Mar-2005 |
njl |
If a device_add_child fails (i.e. low memory situation), be sure to free the unused ivars also.
Submitted by: pjd Obtained from: Coverity Prevent analysis
|
144145 |
26-Mar-2005 |
njl |
Check for invalid frequencies after parsing the package. Keep a running count of valid frequencies and use that as the final package count, don't give up when the first invalid state is found. Also, add 0x9999 and expand our upper check to >= 0xffff Mhz [2].
Submitted by: Bruno Ducrot, Jung-uk Kim [2]
|
143997 |
22-Mar-2005 |
njl |
Add support for bus_delete_resource() and make acpi_bus_alloc_gas() do this before setting a new resource.
|
143865 |
20-Mar-2005 |
njl |
Attach acpi_perf early. Especially when it is being used to provide info to other devices, it needs to be attached first. (Multi-pass newbus probes would be a better solution.)
|
143861 |
20-Mar-2005 |
njl |
Add the acpi_ec_read and write methods. This allows an external driver (like an EC/SMbus controller) to access the EC address space. Access is synchronized by the EcLock/Unlock routines in EcSpaceHandler().
Tested by: Hans Petter Selasky
|
143801 |
18-Mar-2005 |
phk |
s/SLIST/STAILQ/ /imp/a\ pointy hat .
|
143771 |
17-Mar-2005 |
njl |
Introduce a general name for the previously cmbat-only ioctls. It has the same value as the previous ioctls so no binary change. Also, make a few style changes to reduce diffs to my tree.
Loosely based on code from: Hans Petter Selasky
|
143301 |
08-Mar-2005 |
jhb |
- If we fail to find an entry in the PRT, output a warning message. - Fix a bug in the same condition where we forgot to drop the ACPI pcib lock. This fixes hangs after the pcib0 attach on some machines.
Tested by: sos (2)
|
143135 |
04-Mar-2005 |
njl |
On i386 platforms at least, ACPI throttling is accomplished by the chipset modulating the STPCLK# pin based on the duty cycle. Since p4tcc uses the same mechanism (but internal to the CPU), we triggered a hang on some systems at low frequencies when both were in use. Now, disable acpi_throttle when p4tcc is also present.
Tested by: Kevin Oberman
|
143119 |
04-Mar-2005 |
njl |
Check for some impossible frequencies that some systems use to indicate they don't actually support Px states.
|
143002 |
02-Mar-2005 |
obrien |
Fix SCM ID's.
|
142984 |
02-Mar-2005 |
njl |
Protect acpivar.h with _KERNEL. No user parts inside currently.
|
142753 |
28-Feb-2005 |
njl |
Protect against multiple includes and use _KERNEL to protect the PCI fns.
|
142625 |
27-Feb-2005 |
njl |
Make a pass through all drivers checking specs for desired behavior on SMP systems. It appears all drivers except ichss should attach to each CPU and that settings should be performed on each CPU. Add comments about this. Also, add a guard for p4tcc's identify method being called more than once.
|
142587 |
26-Feb-2005 |
njl |
Don't bother with cpufreq_register if we're info-only.
Suggested by: Jung-uk Kim
|
142516 |
25-Feb-2005 |
njl |
Remove unused variable.
Noticed by: Coverity tool
|
142480 |
25-Feb-2005 |
njl |
Instead of assuming units of bytes, it seems more likely that this is a bitfield.
|
142278 |
23-Feb-2005 |
njl |
If a register width is less than 8, assume the BIOS author thought it was in units of bytes and adjust accordingly. This is found at least on the Sony PCG-505BX.
|
142258 |
22-Feb-2005 |
jhb |
Add a entry for the Compaq R3000Z to indicate that it has the weird MADT IRQ 0 quirk.
|
142257 |
22-Feb-2005 |
jhb |
- Add a new quirk to indicate that pin 0 of the first I/O APIC is really IRQ 0 and not an ExtINT pin. The MADT enumerators ignore the PC-AT flag and ignore overrides that map IRQ 0 to pin 2 when this quirk is present. - Add a block comment above the quirks to document each quirk so that we can use more verbose descriptions quirks.
MFC after: 2 weeks
|
142204 |
22-Feb-2005 |
njl |
Increase the maximum to wait for a transition from 1 to 10 ms. In some modes, systems may take longer. If the status values don't match, try matching just the lowest 8 bits if no bits above 8 are set in the desired value. The IBM R32 has other bits set in the status register that are irrelevant to the expected value.
|
142203 |
22-Feb-2005 |
njl |
Support disabling individual cpufreq drivers with hints, e.g., hint.ichss.0.disabled="1"
|
142195 |
22-Feb-2005 |
njl |
Set the start of the cooling time later on, when we're actually performing the switch. Other interim tests (i.e., for minimum runtime) could invalidate the start time. This fixes transitions to cooler states in that now they go to the next active state (_AC0 -> _AC1) instead of going straight to off (_AC0 -> off).
Submitted by: Alexandre "Sunny" Kovalenko (Alex.Kovalenko / verizon.net)
|
142191 |
21-Feb-2005 |
njl |
Since the GPE handler is directly called by ACPI-CA and it may have unknown locks held, specify the ACPI_ISR flag to keep it from acquiring any more mutexes (which could potentially sleep.) This should fix "could sleep" warning messages on the following path:
msleep() AcpiOsWaitSemaphore() AcpiUtAcquireMutex() AcpiDisableGpe() EcGpeHandler() AcpiEvGpeDispatch() AcpiEvGpeDetect() AcpiEvGpeDetect() AcpiEvSciXruptHandler()
|
142073 |
19-Feb-2005 |
njl |
Add a new field to struct cf_setting for special values. These are driver- specific values that other components may want to use. Add support to acpi_perf(4) to export the control and status values via this field.
|
142032 |
18-Feb-2005 |
njl |
Introduce a new method, cpufreq_drv_type(), that returns the type of the driver. This used to be handled by cpufreq_drv_settings() but it's useful to get the type/flags separately from getting the settings. (For example, you don't have to pass an array of cf_setting just to find the driver type.)
Use this new method in our in-tree drivers to detect reliably if acpi_perf is present and owns the hardware. This simplifies logic in drivers as well as fixing a bug introduced in my last commit where too many drivers attached.
|
142024 |
17-Feb-2005 |
njl |
Check for the address space type first before validating it. In particular, we want to return EOPNOTSUPP for FFixedHW no matter what the address.
Submitted by: Bruno Ducrot
|
142003 |
17-Feb-2005 |
njl |
The correct error value for not having enough storage is E2BIG, not ENOMEM. The manpage and ichss(4) are correct.
|
141830 |
13-Feb-2005 |
njl |
Allow users to manually override quirks with the tunable "debug.acpi.quirks". Suggested by: Jung-uk Kim
|
141824 |
13-Feb-2005 |
njl |
Add support for the CPUFREQ_FLAG_INFO_ONLY flag. Devices that report this are not added to the list(s) of available settings. However, other drivers can call the CPUFREQ_DRV_SETTINGS() method on those devices directly to get info about available settings.
Update the acpi_perf(4) driver to use this flag in the presence of "functional fixed hardware." Thus, future drivers like Powernow can query acpi_perf for platform info but perform frequency transitions themselves.
|
141780 |
13-Feb-2005 |
njl |
Be sure to register with cpufreq(4). On systems that only supported throttling, neglecting to do this kept the sysctls from appearing. Attach an acpi_throttle device to each CPU that supports it. Don't add a device if the P_BLK is invalid or if _PTC is not present. This removes extraneous probe/attach failure messages on some machines. Make the cpu throttle state local to the softc to account for partial successes when changing the clock rate on MP machines.
|
141779 |
13-Feb-2005 |
njl |
Attach an acpi_perf device for every processor that offers the right methods.
|
141429 |
07-Feb-2005 |
njl |
Remove handling _PSS notifies from acpi_cpu and let acpi_perf handle them.
|
141415 |
06-Feb-2005 |
njl |
Remove acpi throttling support from the acpi_cpu(4) driver now that this is supported by acpi_throttle(4).
|
141414 |
06-Feb-2005 |
njl |
Break out acpi throttling support into a new relative cpufreq driver, acpi_throttle(4).
|
141411 |
06-Feb-2005 |
njl |
Notify the OS that we're taking over Px states in acpi_perf(4) instead of doing it in the cpu driver. The previous code was incorrect anyway since this value controls Px states, not throttling as the comment said. Since we didn't support Px states before, there was no impact. Also, note that we delay the write to SMI_CMD until after booting is complete since it sometimes triggers a change in the frequency and we want to have all drivers ready to detect/handle this.
|
141380 |
06-Feb-2005 |
njl |
Staticize the legacy cpu devclasses and revert the name for the acpi_cpu devclass. As pointed out by dfr@, devclasses don't have to share the same linkage if multiple drivers have the same name. Newbus should match the devclasses based on name and allocate non-conflicting unit numbers.
|
141373 |
05-Feb-2005 |
njl |
Convert to the new GAS APIs to allow for detach in the future. Also, check the PERF_CTRL register in our probe method so that we can tell earlier that another driver should handle this device due to FFixedHW. This avoids scaring users when attach failed when we really wanted probe to fail.
|
141372 |
05-Feb-2005 |
njl |
Convert to the new GAS API so that we can free registers in the future.
|
141371 |
05-Feb-2005 |
njl |
Convert the acpi_bus_alloc_gas() and acpi_PkgGas() APIs to output the memory type. This is needed if the resource is to be released later. The RID is still also present, though less necessary since rman_get_rid() can be used to obtain it from the resource.
|
141295 |
04-Feb-2005 |
njl |
Don't print out a failure message when an attach for FFixedHW fails. Instead, just fail to attach so another hardware-specific driver can claim the device. Also, clean up some small memory leaks in the failure case.
|
141294 |
04-Feb-2005 |
njl |
Return a special status of "not supported" for functional fixed hardware since this type of register should be handled by another driver.
|
141251 |
04-Feb-2005 |
njl |
Make the devclass static for now until deciding whether to share them.
|
141242 |
04-Feb-2005 |
njl |
Add the ACPI Performance states driver. This driver offers two or more settings as exported via the ACPI _PSS method. OEMs use this interface to encapsulate chipset or processor-specific methods (e.g., SpeedStep or Powernow) and export their settings in a standard way. On systems that have valid ACPI Performance states and a hardware-specific driver (e.g., ichss), acpi_perf(4) is preferred.
|
141238 |
04-Feb-2005 |
njl |
Update the CPU attachments to return CPU_IVAR_PCPU as well as pass on appropriate requests to any children.
|
140916 |
27-Jan-2005 |
njl |
Consistently use pcib for a printf.
|
140449 |
18-Jan-2005 |
jhb |
Don't create new-bus resources for ACPI extended IRQ resources that are producers rather than consumers as new-bus resources only handle consumed resources. We already do this for the other ACPI resource types that support the producer/consumer attribute.
|
140447 |
18-Jan-2005 |
jhb |
For the sake of consistency, look up link devices relative to the root object (/) rather than the pci bus object when walking the _PRT to force attach devices. We already look up relative to the root object when doing interrupt routing.
Suggested by: njl
|
140446 |
18-Jan-2005 |
jhb |
- Add support for link devices where _CRS just outright fails to execute. For such devices, we require _PRS to exist and we warn if any of the resources in _PRS are not IRQ resources (since we'll have no way of knowing which of those resources to use without a working _CRS). When it does come time to set resources, we build up a resource buffer from scratch as we do for devices with _CRS that only have IRQ resources. - Fix a bug with setting extended IRQ resources where we set the IRQ value in the wrong resource structure meaning that whichever IRQ was listed in _PRS was used instead. This might fix some weird issues on certain boxes where IRQs > 16 don't seem to work when using ACPI. - Fix a bug with how we walked the resource buffer after _SRS to call config_intr() in that the 'end' variable was not properly updated, so we could either terminate the loop early or loop after the end of the buffer.
Tested by: pjd
|
139900 |
08-Jan-2005 |
njl |
In total violation of at least 4 sections in the ACPI spec, some systems place device objects in \ (in this case, PCI links.) Work around this by starting our probe from \. To avoid attaching system scope objects, explicitly skip them. (I think it's an ACPI-CA bug that \_SB and \_TZ have device and thermal object types.) Thanks to pjd@ for testing.
MFC after: 2 weeks
|
139749 |
06-Jan-2005 |
imp |
Start each of the license/copyright comments with /*-, minor shuffle of lines
|
139340 |
27-Dec-2004 |
njl |
Minor cleanup: Reduce stack usage in probe method. Outdent probe. Use TRUE/FALSE instead of 1/0 for booleans. Remove trailing and extra whitespace.
|
139339 |
27-Dec-2004 |
njl |
Remove trailing whitespace.
|
139065 |
20-Dec-2004 |
njl |
Only use the current value if there's one IRQ. Some systems return multiple IRQs (which is nonsense for _CRS) when the link hasn't been programmed. Before, this was a KASSERT. A ServerWorks system was seen returning IRQs of 0, 2 in response to _CRS before link setup. Thanks to sam@ for quick testing and turnaround on this.
Tested by: sam
|
139057 |
20-Dec-2004 |
njl |
Only report a critical battery level once until it's gone non-critical. An improvement would be to check all batteries for critical state before printing a message.
Reported by: Kevin Oberman (oberman at es net)
|
138825 |
13-Dec-2004 |
njl |
Unify ACPI_DEBUG support for all OEM drivers under ACPI_OEM. Since more than one will never be supported on the same platform, this does not hurt debugging.
MFC after: 3 days
|
138783 |
13-Dec-2004 |
njl |
Re-enable link programming on resume. It appears the previous bounds error had caused the hang and it has been corrected now.
|
138774 |
13-Dec-2004 |
scottl |
Allow the acpi_ibm module to be built with ACPI_DEBUG.
|
138378 |
05-Dec-2004 |
njl |
Grab Giant around calls to DEVICE_SUSPEND/RESUME in acpi_SetSleepState(). If we are resuming non-MPSAFE drivers, they need Giant held for them. This may fix some obscure suspend/resume problems. It has fixed keyrate setting problems that were triggered by cardbus (MPSAFE) changing the ordering for syscons resume (non-MPSAFE). Also, add some asserts that Giant is held in our suspend/resume and shutdown methods.
Found by: iedowse MFC after: 2 days
|
138333 |
03-Dec-2004 |
njl |
Enable the relaxed behavior for op regions and other workarounds for non-standard BIOSen. We used to implement this in local patches but now that ACPI-CA has merged/re-implemented most of our fixes, they were no longer needed and we just needed to turn this knob on. Also, remove an unnecessary cast.
Tested by: phk
|
138306 |
02-Dec-2004 |
njl |
Turn ACPI and PCI devices off or to a lower power state in suspend and back on again in resume. Override the default of D3 with the value the BIOS specifies in _SxD, if present. Skip serial devices (PNP05xx) since they seem to hang when set to D3 and may require special driver support. Also, skip non-type 0 PCI devices (i.e., bridges) since our we don't yet save/restore their config space and that seems to be necessary.
If this gives you trouble with suspend/resume, you can disable the new ACPI and PCI power behavior separately with these tunables & sysctls: debug.acpi.do_powerstate hw.pci.do_powerstate
Approved by: imp (pci) Tested by: acpi@ (numerous)
|
138305 |
02-Dec-2004 |
njl |
Add the ACPI_PWR_FOR_SLEEP method. It takes a device and outputs the appropriate power (Dx) state, if the BIOS suggests one.
MFC after: 3 weeks
|
138300 |
02-Dec-2004 |
marks |
Catch up with AcpiOsSleep() interface change. Catch up with some #define's renaming. Implement AcpiOsGetTimer() as per ACPI 3.0.
Approved by: njl MFC after: 1 week
|
138280 |
01-Dec-2004 |
jhb |
- Do a better job of handling any Dependent Functions (aka DPFs) that appear in the _PRS or _CRS of link devices. If faced with multiple DPFs in a _PRS, we just use the first one. We assume that if _CRS has DPF tags they only contain a single set since multiple DPFs wouldn't make any sense. In practice, the only DPFs I've seen so far for link devices are that the one IRQ resource is surrounded by a DPF tag pair for no apparent reason, and this should handle that case fine now. - Only allocate link structures for IRQ resources for link devices rather than allocating a link structure for every resource.
Reviewed by: njl Tested by: phk
|
138251 |
01-Dec-2004 |
njl |
Completely back out 1.37. Something else is going on and John wants to keep the locking and solve the real problem.
|
138248 |
01-Dec-2004 |
obrien |
Fix "Lock ACPI PCI link not exclusively locked @sys/dev/acpica/acpi_pci_link.c:153" panic by backing out rev 1.37 in the SMP case. It appears that on a dual-proc machine the assertions in the rev 1.37 commit log hold true.
|
138233 |
30-Nov-2004 |
njl |
Don't bother locking in attach(). At boot time, we're single-threaded anyway and for some reason, witness seems confused about what's already locked and triggers a false panic.
|
138218 |
30-Nov-2004 |
njl |
Make sure the link array is big enough to hold both _CRS and _PRS resource lists. It used to be sized based only on _CRS, hence _PRS could perform an out-of-bounds access if it was larger (i.e., when there are dependent functions). Add asserts to detect this case. Note, this is only a temporary fix and I believe _PRS and _CRS should have separate arrays.
Also, fix a typo where the wrong irq was being check for the APIC case.
Submitted by: tegge
|
138200 |
29-Nov-2004 |
njl |
Instead of translating PCI to ACPI power states, just use a CTASSERT that they are equivalent.
|
138125 |
26-Nov-2004 |
njl |
Temporarily disable programming IRQ links on resume. The new code hangs several of my systems.
|
138035 |
23-Nov-2004 |
jhb |
- Remove some no longer used constants. - Sort function prototypes.
|
138033 |
23-Nov-2004 |
jhb |
Rework the ACPI PCI link code. - Use a new-bus device driver for the ACPI PCI link devices. The devices are called pci_linkX. The driver includes suspend/resume support so that the ACPI bridge drivers no longer have to poke the links to get them to handle suspend/resume. Also, the code to handle which IRQs a link is routed to and choosing an IRQ when a link is not already routed is all contained in the link driver. The PCI bridge drivers now ask the link driver which IRQ to use once they determine that a _PRT entry does not use a hardwired interrupt number. - The new link driver includes support for multiple IRQ resources per link device as well as preserving any non-IRQ resources when adjusting the IRQ that a link is routed to. - The entire approach to routing when using a link device is now link-centric rather than pci bus/device/pin specific. Thus, when using a tunable to override the default IRQ settings, one now uses a single tunable to route an entire link rather than routing a single device that uses the link (which has great foot-shooting potential if the user tries to route the same link to two different IRQs using two different pci bus/device/pin hints). For example, to adjust the IRQ that \_SB_.LNKA uses, one would set 'hw.pci.link.LNKA.irq=10' from the loader. - As a side effect of having the link driver, unused link devices will now be disabled when they are probed. - The algorithm for choosing an IRQ for a link that doesn't already have an IRQ assigned is now much closer to the one used in $PIR routing. When a link is routed via an ISA IRQ, only known-good IRQs that the BIOS has already used are used for routing instead of using probabilities to guess at which IRQs are probably not used by an ISA device. One change from $PIR is that the SCI is always considered a viable ISA IRQ, so that if the BIOS does not setup any IRQs the kernel will degenerate to routing all interrupts over the SCI. For non ISA IRQs, interrupts are picked from the possible pool using a simplistic weighting algorithm.
Tested by: ru, scottl, others on acpi@ Reviewed by: njl
|
137780 |
16-Nov-2004 |
njl |
Enable throttling/C3 quirks for PIIX4 parts. Defer checking quirks until after boot so that PCI is initialized and we can probe for the problem chipsets. Note that while probed but unusable states are disabled, they aren't freed yet. In the future, it may make sense to detach them.
Tested by: Adam K Kirchoff <adamk at voicenet com> MFC after: 2 days
|
137715 |
15-Nov-2004 |
imp |
After discussions with Nate, repo copy the acpi assist drivers from i386 to dev/acpi_support. In theory, these devices could be found other than in i386 machines only as amd64 becomes more popular. These drivers don't appear to do anything i386 specific, so move them to dev/acpi_support. Move config lines to files so that those architectures that don't support kernel modules can build them into the kernel. At the same time, rename acpi_snc to acpi_sony to follow the lead of all the other specialty devices.
|
137701 |
14-Nov-2004 |
truckman |
s/return_VALUE/return / to fix build breakage when ACPI_DEBUG is defined.
|
137681 |
13-Nov-2004 |
imp |
Kill ACPI_FUNCTION_TRACE. It is killing the tinderbox build, and it isn't worth adding to the modules lists that we have to hard code for this to work. Since we print PID right away, we have a trace point already.
Minor knf while I'm here.
|
137593 |
11-Nov-2004 |
imp |
Commit takawata-san's Sony Notebook Controller driver, integrated into the tree. Small tweaks were made by myself to eliminate unnecessary includes and some other minor issues. Last time I asked takawata-san about this driver, he suggested I commit it.
Submitted by: takawata
|
137590 |
11-Nov-2004 |
jhb |
Only warn about missing _PRT tables if bootverbose is set. I've yet to see a bridge without a _PRT were a _PRT was needed. Instead, the warning in dmesg is a false warning and only serves to cause unnecessary concern.
MFC after: 1 week
|
137444 |
09-Nov-2004 |
njl |
unsigned long -> u_long
|
137438 |
09-Nov-2004 |
njl |
Tell the BIOS we want to handle brightness switching as well as output switching. Don't initialize variables in their declaration. Reduce stack usage for device names. Minor style cleanups.
MFC after: 1 week
|
137151 |
03-Nov-2004 |
phk |
Make the bootverbose output from qualitydetermination of the ACPI timer take up only one line.
|
137099 |
31-Oct-2004 |
des |
Add TUNABLE_LONG and TUNABLE_ULONG, and use the latter for the hw.pci.host_mem_start tunable. Add comments to TUNABLE_INT and TUNABLE_QUAD recommending against their use.
MFC after: 3 weeks
|
137098 |
31-Oct-2004 |
des |
Whitespace cleanup
|
136476 |
13-Oct-2004 |
njl |
Print before the footer, not after.
|
136475 |
13-Oct-2004 |
njl |
If flags are present, print them like ISA does.
MFC after: 1 day
|
136455 |
12-Oct-2004 |
njl |
Attach the device description for ISA devices on the ACPI bus.
MFC after: 1 day
|
136398 |
11-Oct-2004 |
njl |
Update C3 support when BM control is not present.
* Fix a bug where caches were flushed on non-C3 transitions. * Be sure a working flush cache instruction is present before using it. * Disable C3 completely if it isn't present.
|
136397 |
11-Oct-2004 |
imp |
Make the lower range of the memory area 0x80000000 again. Also introduce hw.{pci,acpi}.host_mem_start tunable to change this.
MFC: ASAP
|
136369 |
11-Oct-2004 |
njl |
Notify the user when the battery is critically low. In the future, we may want to shut down here but the chance of BIOS vendors getting this wrong is high. They're only supposed to announce this when all batteries hit their critical level but past experience indicates we should be conservative about this for now.
|
136368 |
11-Oct-2004 |
njl |
If bus mastering control is not available (PM2_BLK), don't just disable C3. Instead, flush caches before entering C3. This may be slower but provides good power savings.
|
136366 |
11-Oct-2004 |
njl |
Move the code for halting the CPU (acpi_cpu_c1) into machdep files. This removes the last MD portion of acpi_cpu.c.
MFC after: 2 weeks
|
136270 |
08-Oct-2004 |
njl |
Update a quirk for the ASUS P5A to disable the timer. It appears to work fine with acpi but the timer runs twice as fast. Note that the main problem (system doesn't work properly with acpi disabled) should be fixed separately.
Changes: * Add a quirk to disable the timer * Merge the P5A and P5A-B quirks since they appear to be based on the same ASL.
PR: i386/72450 Tested by: Kevin Oberman <oberman es.net> MFC after: 3 days
|
136189 |
06-Oct-2004 |
imp |
For older systems with ACPI which don't have a pci <-> pci bridge, allocate unallocated memory resources from the top 32MB of the address space rather than the top 2GB. While the latter works on some chipsets, it fails badly on others. 32MB is more conservative and matches what cheap harware from this era is hardwired to pass.
|
136161 |
05-Oct-2004 |
njl |
When the user overrides the DSDT, replace any SSDTs with a simple no-op table. acpidump(8) concatenates the body of the DSDT and SSDTs so an edited ASL will contain all the necessary information. We can't use a completely empty table since ACPI-CA reports this as a problem.
MFC after: 3 days
|
135785 |
25-Sep-2004 |
njl |
Allow routing to the SCI even if it's not in the list of valid IRQs.
MFC if: no problems
|
135574 |
22-Sep-2004 |
jhb |
Add a couple of macros to extract the PCI slot (device) and function from an ACPI _ADR value and use that rather than inlining the same shifts and masks everywhere.
|
135548 |
21-Sep-2004 |
njl |
Initialize the flags value properly. We used to do this in acpi_tz_all_off() but that function has been removed. This avoids a potential unnecessary fan switch on boot. Also remove some commented out code.
MFC after: 3 days
|
135545 |
21-Sep-2004 |
njl |
Don't disable acpi in shutdown if we're panicing (panicstr != NULL). This may help with double panics.
|
135501 |
20-Sep-2004 |
njl |
Record a problem we can't workaround for now regarding duplicate interrupts because of links left enabled while in APIC mode. A large scale rework of irq links is underway by jhb@ which should fix this eventually.
|
135308 |
16-Sep-2004 |
njl |
Don't print a warning message if the _CRS value is empty. This is already covered by other printfs under ACPI_DEBUG and is not a failure case.
MFC after: 3 days
|
134961 |
08-Sep-2004 |
njl |
Clean up rev 1.49 by using the temperature conversion for _PSV also and wrap a long line.
|
134909 |
07-Sep-2004 |
njl |
Don't change the state of the system in acpi_tz_establish(). Before, we would turn off all fans when initializing a zone. However, the HP Omnibook 500 generates a notify saying the zone needs to be re-evaluated whenever its fan is switched on or off. This produced an infinite loop. Also, note that running _SCP can generate the same notify.
Since we need to make sure old fan references are turned off when getting new ones, run acpi_tz_monitor() first. This will turn off any unneeded fans. Then, check for new settings. After that, run acpi_tz_monitor() again to turn on/off any fans referenced by the new settings.
Tested by: brooks
|
134908 |
07-Sep-2004 |
njl |
Instead of trusting _STA from power resources, cache the first value returned and then infer the state from calls to _ON/_OFF. This works around a problem in systems that don't correctly report the state (i.e. the HP Omnibook 500 reports "on" for its fan always after it has been turned on once).
|
134628 |
02-Sep-2004 |
njl |
Don't enter the debugger when executing an AML breakpoint instruction unless ACPI_DEBUG is defined. Users don't typically care about errant breakpoint instructions. The HP Pavilion 7915 has this in its PCI0 _INI method for rev 0x6040000 of the RSDT.
|
134606 |
01-Sep-2004 |
njl |
Disable links after getting the possible resources. Even though _DIS should only affect current resources, it seems best to wait until all configuration is done before disabling it. If this fixes any problems, it is a MT5 candidate.
|
134541 |
30-Aug-2004 |
peter |
Add a suffix descriptor for the acpi thermal values as a hint for the userland sysctl tool to print a more readable value for temperatures.
|
134359 |
27-Aug-2004 |
njl |
Always set the status and move a printf under bootverbose.
Tested by: gj
|
134352 |
26-Aug-2004 |
njl |
If getting the current setting after modifying the link failed, we assume it succeeded. However, we also need to set the status to AE_OK.
|
134305 |
25-Aug-2004 |
njl |
Remove code to initialize the lid state at boot. It interfered with lid operation for some users with pure GPE lid switches (vs. embedded controller.)
Tested by: Anish Mistry <mistry.7_at_osu.edu> MFC after: 3 days
|
134217 |
23-Aug-2004 |
njl |
Rework sysresource management. Instead of having each sysresource object hold its own values, pass them up to the parent (acpi0) and merge/uniq them on the way. After the namespace evaluation, acpi will reserve these resources and manage them via rman before bus_generic_probe() and bus_generic_attach(). This is necessary because some systems specify conflicting resources in separate sysresource objects. It's also cleaner in that the interface between sysresource and acpi is now merely the parent's resource list. This code handles the following cases:
1. Unique resource: add it to the parent via bus_set_resource(). 2. New wholly contained in old: discard new. 3. New tail overlaps old head: grow old head downward. AND/OR 4. New head overlaps old tail: grow old tail upward.
Tested by: Pawel Worach <sajd_at_telia.com> Tested by: Radek Kozlowski <radek_at_raadradd.com> MFC after: 5 days
|
134126 |
21-Aug-2004 |
njl |
Fix PCI link irq programming on resume. A logic bug prevented a device match, inverting which links actually got resumed.
Submitted by: Hiroyuki Aizu <eyes_at_navi.org> MFC after: 3 days
|
134088 |
20-Aug-2004 |
njl |
Use the new start for the offset, not the old end.
|
134086 |
20-Aug-2004 |
njl |
Correctly handle BIOS resources that are duplicated (!). There are many systems that have overlapping regions specified in their sysresource objects. This patch fixes ATA DMA and acpi_timer allocation for such sysctems. It should eventually be moved to resource_list_add() if it is a valid generalized approach. The minimal approach for 5.3 is:
"Loop through all current resources to see if the new one overlaps any existing ones. If so, the old one always takes precedence and the new one is adjusted (or rejected). We check for three cases:
1. Tail of new resource overlaps head of old resource: truncate the new resource so it is contiguous with the start of the old. 2. New resource wholly contained within the old resource: error. 3. Head of new resource overlaps tail of old resource: truncate the new resource so it is contiguous, following the old."
Tested by: Radek Kozlowski <radek_at_raadradd.com> Discussed with: imp MFC after: 4 days
|
133977 |
18-Aug-2004 |
njl |
If _CRS fails, assume that it succeeded. The ASUS K8V (and others) defines single-entry irq links even though it uses an APIC. It appears that it ignores _SRS when in APIC mode but returns a valid irq at other times.
|
133943 |
18-Aug-2004 |
njl |
Call AcpiLeaveSleepState() before DEVICE_RESUME(). The former calls the BFS and WAK methods, which are needed to initialize some devices before the driver can resume them. This was the original order.
MFC after: 2 days
|
133933 |
18-Aug-2004 |
njl |
Remove the ACPIIO_ENABLE and ACPIIO_DISABLE ioctls as well as all callers. These ioctls attempted to enable and disable the ACPI interpreter at runtime. In practice, it is not possible to boot with ACPI and then disable it on many systems and trying to do so can cause crashes, interrupt storms, etc. Binary compatibility with userland is retained.
MFC after: 2 days
|
133919 |
17-Aug-2004 |
njl |
Fix a deadlock on boot for some systems where reading the battery status also generates a notify. Since we held the lock over this call, the notify never got to run and the battery status read never returned. Document this also.
Tested by: Maxim Maximov <mcsi_at_mcsi.pp.ru> Approved by: re (scottl)
|
133664 |
13-Aug-2004 |
njl |
Fix building for the ACPI_DEBUG case.
|
133661 |
13-Aug-2004 |
njl |
Record the new status after checking if it has changed, not before. This fixes lost AC line transition events.
Bug report: Kevin Oberman
|
133627 |
13-Aug-2004 |
njl |
MPSAFE locking
* Simplify taskqueue locking. * Don't acquire Giant around calls to the taskqueue function. * Remove 4.x compatibility routines.
|
133626 |
13-Aug-2004 |
njl |
MPSAFE locking
* Remove the interrupt wrapper that locked Giant and call the handler directly. Mark the handler as MPSAFE. * Don't attempt to detect if a handler is installed. Leave that to the bus_alloc_resource() function.
|
133625 |
13-Aug-2004 |
njl |
MPSAFE locking
* Serialize operations in acpi_video_bind_outputs(), acpi_video_detach(), acpi_video_notify_handler(), acpi_video_power_profile(), and the sysctls. The main goal is to protect the shared device list and prevent conflicting settings. * Add assertions that the sx lock is held in the leaf functions.
|
133624 |
13-Aug-2004 |
njl |
MPSAFE locking
* Restructure the event handling path. acpi_tz_thread() now calls acpi_tz_timeout() any time an event occurs. acpi_tz_timeout() checks the flags and calls acpi_tz_power_profile(), acpi_tz_establish(), and acpi_tz_monitor() as appropriate. Notifies only do a wakeup and let acpi_tz_thread() do the actual work. This path is cleaner and allows locking since the call path is now always a D.A.G. * Add the acpi_tz_signal() function to set flags and wake the thread. * Remove the tz_tmp_updating flag since calls are serialized by acpi_tz_thread(). * Remove Giant locking.
|
133623 |
13-Aug-2004 |
njl |
MPSAFE locking: Add a comment that we need resource list and device_t refcounting/locking.
|
133622 |
13-Aug-2004 |
njl |
MPSAFE locking
* Serialize acpi_pwr_switch_consumer() and acpi_pwr_wake_enable(). * Make acpi_pwr_switch_consumer() have a single exit point. * Add assertions to the leaf functions they call. * Fix a memory leak in acpi_pwr_deregister_consumer(). However, it is currently ifdefed out so this code was unused.
|
133621 |
13-Aug-2004 |
njl |
MPSAFE locking
* Serialize calls to acpi_pcib_route_interrupt(). * Note that acpi_pcib_attach() should not be called concurrently.
|
133620 |
13-Aug-2004 |
njl |
MPSAFE locking
* Serialize access to acpi_pci_link_config(), acpi_pci_find_prt(), acpi_pci_link_route(), and acpi_pci_link_resume(). * Add lock assertions to all functions called by them.
|
133619 |
13-Aug-2004 |
njl |
MPSAFE locking
* Serialize access to acpi_pci_set_powerstate_method().
|
133618 |
13-Aug-2004 |
njl |
MPSAFE locking
* Serialize notifying the user in acpi_lid_notify_status_changed(). This way multiple lid events occur in order. * Add an initialization pass to get the lid status at boot-time. This pass does not notify any apps but gets the initial status.
|
133617 |
13-Aug-2004 |
njl |
MPSAFE locking
* Use the common serialization macros instead of rolling our own. * Increase the coverage of the lock in EcSpaceHandler() to cover the entire loop to avoid dropping the lock when reading more than one byte.
|
133616 |
13-Aug-2004 |
njl |
MPSAFE locking
* Hold the ACPI lock over table register writes. * Serialize calls to acpi_cpu_throttle_set() and the sysctls.
|
133615 |
13-Aug-2004 |
njl |
MPSAFE locking
* Serialize ops in acpi_cmbat_notify_handler(), acpi_cmbat_ioctl(), acpi_cmbat_init_battery(), and acpi_cmbat_get_battinfo(). * Get the softc directly in acpi_cmbat_get_total_battinfo() rather than build an array of them. * Don't queue a _BIF query after receiving a notify. Since we clear the timespec, a _BIF query will be done in the context of the next caller. * Add asserts to leaf functions that operate on shared data. * Remove the bst/bif updating flags now that we hold the lock over the full query. * Explain various comments in more detail.
|
133614 |
13-Aug-2004 |
njl |
MPSAFE locking
* Serialize acpi_battery_get_battdesc(), acpi_battery_register(), and acpi_battery_remove(). * Assert that the sx lock is held in acpi_batteries_init(). * Remove check for device_get_softc() returning NULL.
|
133613 |
13-Aug-2004 |
njl |
MPSAFE locking
* Serialize notification of acline changes in acpi_acad_get_status(). * Remove the initializing flag. With the locking, we don't need to push off requests for the acline before initialization is done. * Don't check device_get_softc(), it can't return NULL.
|
133612 |
13-Aug-2004 |
njl |
MPSAFE locking
* Serialize calls to acpi_alloc_resource(), acpi_release_resource(), acpi_Enable(), acpi_Disable(), and acpi_debug_sysctl(). * Acquire the ACPI mutex in acpi_register_ioctl(), acpi_deregister_ioctl(), and acpiioctl(). * Acquire the mutex while disabling subsequent requests to enter a sleep state in acpi_SetSleepState(). * Be sure to re-enable sleep requests and don't run resume methods when the current request fails. * Don't check if sleep requests are disabled in the ACPIIO_SETSLPSTATE ioctl. acpi_SetSleepState() does this for us. * Remove the acquisition of Giant from the struct cdevsw. * Remove the ACPI_USE_THREADS option.
|
133611 |
13-Aug-2004 |
njl |
MPSAFE locking
* Add and comment our locking primitives. The mutex primitives use a a static mutex and the serialization ones use a static sx lock. A global acpi_mutex is used for access to global resources (i.e., writes to the SMI_CMD register.) * Remove 4.x compat defines.
|
133586 |
12-Aug-2004 |
njl |
Skip dependent functions when finding the resource from _PRS to use for later calls to _SRS. Add note that this code should be centralized at some point.
Bug from: Jiawei Ye <leafy7382_AT_gmail.com>
|
133585 |
12-Aug-2004 |
njl |
Only print the link name if there is a link. For the hardwired case, don't bother printing it. This fixes a panic and acpi_name() has been more robust as well.
Bug from: Tai-hwa Liang <avatar-at-mmlab.cse.yzu.edu.tw>
|
133584 |
12-Aug-2004 |
njl |
Allow null handles to be passed into acpi_name().
|
133533 |
12-Aug-2004 |
njl |
Fix the PRT entry code in acpi_pci_link to always add the entry, even if there is no irq link. Since we now use the stored copy of PRT, not the one that used to be passed into acpi_pcib_route_interrupt(), we need it in the list. [1]
Fix a bug in acpi_pci_find_prt() where we weren't checking the bus, thus choosing the wrong PRT entry to use for routing the link. Also, add a printf for the case where the PRT entry is not found as this should not happen.
Tested by: marcel [1]
|
133519 |
11-Aug-2004 |
njl |
Add some more verbose warning/error messages to help with users reporting problems with irq routing.
|
133500 |
11-Aug-2004 |
njl |
Re-work ACPI PCI IRQ routing (_PRT, link devices). The old approach was incomplete in that the PRT routing was not aware of link programming. Fix this by doing all routing through the link devices. The new algorithm for setting up links is:
1. Read _CRS to get current setting. If invalid (not in _PRS), then set to 0. 2. Attempt to call _DIS on the link. If successful, mark the link as not routed. Otherwise, assume it still is.
Then when a routing request occurs:
3. Update weights for all IRQs 4. Attempt to route the initial IRQ if valid 5. If that fails, walk through the sorted list, attempting to route IRQs. 6. Configure the trigger/polarity based on _PRS.
Other changes: * Add acpi_pci_find_prt() to look up the PRT entry for a given device and acpi_pci_link_route() to select/route the best IRQ for it. * Remove duplicated code in acpi_pcib_route_interrupt() that picked the first IRQ from _PRS. * Remove unneeded arguments from acpi_pcib_resume() and friends. * Ignore _STA on link devices but report if it seems strange. * Add a prt_source handle to the PRT structure since the ACPI struct ACPI_PCI_ROUTING_TABLE uses a fixed-size entry for it. We'll need to dynamically size this object if we want to use it the same way ACPI-CA does. Null-terminate the source.
Tested by: Luo Hong <luohong99_at_mails.tsinghua.edu.cn>, Jeffrey Katcher <jmkatcher_at_yahoo.com> Info from: jhb, Len Brown (Intel)
|
133455 |
10-Aug-2004 |
njl |
Don't call DEVICE_RESUME a second time if DEVICE_SUSPEND fails. The bus_generic_suspend method does this for us. Disable interrupts before entering S1. This may help some systems suspend to S1 successfully.
|
133193 |
06-Aug-2004 |
njl |
Refine updates to PCI irq routing. Check _STA and _CRS but only print a message if they are incorrect. Also, remove the hack of allowing the initial irq setting to not be in _PRS. As before, the old behavior can be regained by defining ACPI_OLD_PCI_LINK.
|
133188 |
06-Aug-2004 |
njl |
Add flags for _STA (status) methods and convenience macros for checking the presence of batteries and devices.
|
133157 |
05-Aug-2004 |
njl |
Work around non-compliant BIOS PCI link devices. Some systems have the following behavior:
* Link devices return invalid status (_STA) values. The results are very unreliable -- sometimes never present. Just ignore the status and pick the best configuration from _PRS.
* Link devices return invalid current settings (_CRS). Even after setting the link value, many systems still return a different setting for _CRS. When setting an IRQ, don't bother to check _CRS to see if we succeeded. Note that we still check _CRS before routing and this should be addressed as well.
Since this is a sensitive area, leave the old behavior accessible via uncommenting the define for ACPI_OLD_PCI_LINK at the top of the file. Once this has been thoroughly tested, this option and the code it covers will be removed.
Thanks to Len Brown at Intel for informing us of these issues as he worked around them in Linux.
|
133081 |
03-Aug-2004 |
njl |
Fix the ACPI_DEBUG case by removing a now unused variable.
|
133075 |
03-Aug-2004 |
obrien |
Initialize variables to fix kernel build on AMD64.
|
133051 |
03-Aug-2004 |
njl |
/tmp/m
|
132651 |
26-Jul-2004 |
njl |
Don't force an immediate probe/attach for all devices when compiled with ACPI_DEBUG. This upset the ordering that acpi_probe_order() was meant to provide, causing devices to attach before the sysresource object. This debugging feature has been unnecessary for a while so just remove it.
Testing by: marcel
|
132605 |
24-Jul-2004 |
njl |
Fix a bug where an item was being removed from a list without using FOREACH_SAFE. Remove bad cast of retp and instead use an additional arg to pass back the number of valid outputs. Use the package convenience functions for parsing packages.
|
132528 |
22-Jul-2004 |
njl |
Reinsert the bus space handle and tag, they are needed for the timer test.
|
132527 |
22-Jul-2004 |
njl |
Instead of doing everything in identify, do a proper probe/attach. Also, don't add another device if identify is called twice. Minor reworking by myself.
Submitted by: marcel
|
132526 |
22-Jul-2004 |
njl |
Remove unused (and bogus) locking, style cleanup, remove unnecessary casts.
|
132261 |
16-Jul-2004 |
njl |
Use ACPI_ALL_NOTIFY instead of registering handlers separately.
|
132256 |
16-Jul-2004 |
njl |
Fix acpi_video loading. When we started cleaning up the duplicate handles left around after the PCI probe, acpi_video stopped attaching because while it was an acpi child device, it really is a PCI device. Fix this by making it a PCI child.
* Remove non-handle ivars accesses since child busses only implement acpi_get_handle(). * Access the acpi softc directly through the devclass instead of through the implied parent. * Clean up a potential panic on unload by freeing the sysctl context before storing NULL in the OID.
Found by: marks
|
132212 |
15-Jul-2004 |
njl |
Update the interface for child drivers. Add acpi_scan_children, which allows a bus to re-enumerate its child handles and optionally replace them with new children, arranged to the bus's liking. (The current device space is flat with all devices immediately under acpi0). Add comments for each interface.
|
132158 |
14-Jul-2004 |
marks |
Some laptops report the "design-capacity" instead of the "real-capacity" when the battery is fully charged. That breaks some of the arithmetic in calculating the remaining capacity (ends up with more than 100%). This commit makes sure the max is 100.
Approved by: njl
|
132136 |
14-Jul-2004 |
takawata |
Follow PnP location string change in acpi.c.
|
132115 |
13-Jul-2004 |
njl |
Clean up our pnpinfo and location strings.
|
132114 |
13-Jul-2004 |
njl |
Call device_identify routines after doing the namespace walk. This is needed so that sysresource objects are created first to reserve all regions, then other devices can allocate from them. Otherwise, acpi_timer (the only ACPI device with an identify routine), would allocate its resources from the nexus, causing the later sysresource reserve to fail.
Debugging by: Taku YAMAMOTO, Andrea Campi
|
132049 |
12-Jul-2004 |
njl |
Add the ability to detach a battery. Now batteries that are detached are also removed from the battery list.
|
131910 |
10-Jul-2004 |
marcel |
Update for the KDB framework: o Call kdb_enter() instead of Debugger().
|
131577 |
04-Jul-2004 |
imp |
Make the default memory range in the top 2GB of ram in the hopes that this more accurately reflects what the underlying hardware of most acpi machines that don't have children pci busses.
We still need a better way to get this information from acpi/hardware.
|
131480 |
02-Jul-2004 |
njl |
Remove duplicate FreeBSD id.
|
131474 |
02-Jul-2004 |
njl |
Get rid of the strict aliasing error by retrieving the ECDT via a table header pointer and then casting it to the ecdt pointer. This fixes the -O2 build. I'm unsure what changed recently to reveal this error since this code has been unchanged for months.
|
131417 |
01-Jul-2004 |
imp |
After re-exporting rman, et al, __RMAN_RESOURCE_VISIBLE is no longer necessary for this file. It just needed the size and guts of struct rman.
|
131398 |
01-Jul-2004 |
jhb |
Trim a few things from the dmesg output and stick them under bootverbose to cut down on the clutter including PCI interrupt routing, MTRR, pcibios, etc.
Discussed with: USENIX Cabal
|
131384 |
01-Jul-2004 |
njl |
Rework the code that waits for a response from the EC. Use an sx lock instead of a mutex so we do not unblock it in msleep(). If we do this, another event could occur, resetting the status register since reads reset it. While I'm here, remove the backoff approach. Instead, sleep in 10 ms chunks for up to the configured timeout using either DELAY (if we aren't booted yet) or tsleep.
Help from: dillon Tested by: Andrew Thompson andy AT fud.org.nz
|
131366 |
30-Jun-2004 |
njl |
Add missing function debug trace macros to the new powerres functions.
Reported by: phk
|
131344 |
30-Jun-2004 |
imp |
Hide struct resource and struct rman. You must define __RMAN_RESOURCE_VISIBLE to see inside these now.
Reviewed by: dfr, njl (not njr)
|
131341 |
30-Jun-2004 |
njl |
Move flags into a private ivar so it can't collide with device flags. Unify the code to disable GPEs with the enable code. Shutdown is handled the same way. ACPI now does all wake/sleep prep for child devices so now they no longer need to call external functions in the suspend/resume path. Add the flags to non-ACPI busses (i.e., pci).
|
131340 |
30-Jun-2004 |
njl |
Add a method for referencing/switching power resources based on _PRW. This brings us into line with the standard, which requires power resources be enabled when wake is enabled for a given device. Move the dereferencing code into its own function, +acpi_pwr_dereference_resource().
|
131339 |
30-Jun-2004 |
njl |
Disable the EC GPE in the shutdown path. This is correct but is not known to fix any bug.
|
131336 |
30-Jun-2004 |
njl |
Diff reduction for style.
|
131315 |
30-Jun-2004 |
njl |
Add new quirk code that disables problem BIOS versions. Remove old quirk code that was never really used. Print a message when disabling ACPI via a quirk. Allow the user to override the blacklist decision by setting hint.acpi.0.disabled="0". Add missing AcpiTerminate() calls; they are needed to clean up if bailing out after AcpiInitializeSubsystem().
|
131313 |
30-Jun-2004 |
njl |
Add the table quirk matching code. It matches rules defined in acpi_quirks and sets the flags. It also calls the machdep quirk code first. This allows table quirks (or whitelists) to override machdep quirks.
|
131312 |
30-Jun-2004 |
njl |
Add machdep quirks functions. On i386, this disables acpi on systems with BIOS dates earlier than Jan 1, 1999. Add prototypes and quirks flags.
|
131283 |
29-Jun-2004 |
njl |
Staticize acpi_MatchHid() and include acpi_if.h
|
131282 |
29-Jun-2004 |
njl |
Use the acpi_id_probe() method instead of acpi_MatchHid(), which is now static.
|
131281 |
29-Jun-2004 |
njl |
Add implementation of the ACPI methods which hands them off to ACPI-CA. acpi_id_probe() returns NULL for no match or the ID string that matched if the driver should attach.
|
131276 |
29-Jun-2004 |
njl |
Add acpi methods for HID/CID probing, evaluating objects, and walking the namespace. This is to allow decoupling of attachments from ACPI where they need some functionality when ACPI is present but do not want to require ACPI to always be loaded.
|
131269 |
29-Jun-2004 |
njl |
Use a default of the FADT for matching CreatorId quirks. Use XSDT to mean "match either RSDT or XSDT."
|
131258 |
29-Jun-2004 |
njl |
Include isa/pnpvar.h and remove a duplicate copy of PNP_EISAID.
|
131257 |
28-Jun-2004 |
njl |
While booting, use DELAY() for waiting for the EC to respond instead of msleep(). Until we're finally up, msleep is a no-op.
Explained by: peter
|
131221 |
28-Jun-2004 |
imp |
rman_reserve_resource doesn't set the bushandle, so we have to do it here.
Badness noted by: njl Perforce reply not read by: imp
|
131189 |
27-Jun-2004 |
imp |
MFp4: Set the bus handle to the bus handle of the resource, not the starting value. This is more pedantically correct (since the handle isn't always identical to the start of the resource) and also doesn't access the innards of struct resource direct (which I forbid in my tree). We need to do this for all resource types, not just ioport.
Reviewed by: njl
|
131039 |
24-Jun-2004 |
njl |
Update some comments and remove non-standard notation.
|
131036 |
24-Jun-2004 |
njl |
Add a quirks array based on matching ACPI tables. The entries in this file are currently all bad BIOS revisions that will never be able to support ACPI. They were derived by examining which BIOS's are blacklisted by other operating systems. Other types of quirks will be possible here as well.
|
131009 |
24-Jun-2004 |
njl |
Attach the correct handle, not the one that was just deleted. Also, remove some duplicated code.
|
131004 |
24-Jun-2004 |
njl |
Run the power off code directly instead of using indirection through smp_rendezvous() to ensure we run on the BSP. This reverts rev 1.128. Add a comment indicating that MI code should be the one that runs all shutdown functions on the BSP with the APs halted. This should work around problems in power off while waiting for the MI code to be improved.
|
131002 |
24-Jun-2004 |
njl |
Use uintmax_t for CPU statistics and add a cast to prevent truncation of the statistics in a multiply.
Pointed out by: YONETANI Tomokazu
|
130981 |
23-Jun-2004 |
jhb |
- Defer BUS_CONFIG_INTR() on ACPI IRQ resources until the resources are actually used. For most ACPI devices this means deferring the call until bus_alloc_resource(). - Add a function acpi_config_intr() to call BUS_CONFIG_INTR() for an ACPI IRQ resource using the trigger mode and polarity information stored in the ACPI resource object. - Add a function acpi_lookup_irq_resource() to lookup the ACPI IRQ resource that corresponds to a specified rid and new-bus resource. - Have the ACPI PCI bridge driver call BUS_CONFIG_INTR() on interrupts that it routes through link devices. - Remove needactivate variable from acpi_alloc_resource() by changing the function not modify the flags variable but just mask off RF_ACTIVE when calling rman_reserve_resource().
Reviewed by: njl (1, an earlier version)
|
130978 |
23-Jun-2004 |
jhb |
Now that we associate a device_t with ACPI device handles, lookup the device associated with any PCI devices that are enumerated in the ACPI tree when adding children to an ACPI PCI bus and remove the duplicate ACPI-only device_t and replace the device_t associated with the handle with the ACPI and PCI aware device_t.
|
130914 |
22-Jun-2004 |
brueffer |
Fix typos and add spaces before `(' in some comments
Submitted by: markus Approved by: njl MFC after: 3 days
|
130704 |
19-Jun-2004 |
njl |
Add more precision to the cx_usage sysctl output and special-case 0%.
Submitted by: YONETANI Tomokazu <qhwt+freebsd-acpi AT les.ath.cx>
|
130695 |
18-Jun-2004 |
njl |
Remove compat code and unused lock declarations.
|
130694 |
18-Jun-2004 |
njl |
Remove compat defines.
|
130585 |
16-Jun-2004 |
phk |
Do the dreaded s/dev_t/struct cdev */ Bump __FreeBSD_version accordingly.
|
130486 |
14-Jun-2004 |
jhb |
Revert the removal of the initial_irq hack for now as this code is more broken than I thought and doesn't do a good job of routing virgin interrupts at all.
|
130451 |
14-Jun-2004 |
njl |
Remove disable_on_poweroff and our pre-sync shutdown handler. Disabling of GPEs is now done in acpi_shutdown() and so we no longer need the option of disabling ACPI in the poweroff case.
|
130450 |
14-Jun-2004 |
njl |
Clean up acpi_probe_order() a bit and clarify some comments.
|
130448 |
14-Jun-2004 |
njl |
Don't probe/attach in the ACPI_DEBUG case.
|
130439 |
13-Jun-2004 |
njl |
Add support to ACPI to manage its own resources. Previously, resource allocation was passed up to nexus. Now, we probe sysresource objects and manage the resources they describe in a local rman pool. This helps devices which attach/detach varying resources (like the _CST object) and module loads/unloads. The allocation/release routines now check to see if the resource is described in a child sysresource object and if so, allocate from the local rman. Sysresource objects add their resources to the pool and reserve them upon boot. This means sysresources need to be probed before other ACPI devices.
Changes include: * Add ordering to the child device probe. The current order is: system resource objects, embedded controllers, then everything else. * Make acpi_MatchHid take a handle instead of a device_t arg. * Replace acpi_{get,set}_resource with the generic equivalents.
|
130417 |
13-Jun-2004 |
njl |
Associate a device_t with an ACPI_HANDLE. This make AcpiWalkNamespace more useful. If ACPI-CA allowed null object handlers, we wouldn't need the placeholder function.
|
130210 |
07-Jun-2004 |
njl |
Remove accidental change.
|
130208 |
07-Jun-2004 |
njl |
Avoid printing extraneous warning messages when trying to switch a device which doesn't support ACPI power states. Return AE_NOT_FOUND for these cases and don't print the warning message. Also, print the name of the handle instead of device when unable to switch states. The device is often not attached at this point and so its name is NULL, which doesn't help debugging.
|
130196 |
07-Jun-2004 |
jhb |
- Use PCI_INVALID_IRQ macro rather than a magic number. - Remove obsolete comment about APIC_IO routing.
|
130119 |
05-Jun-2004 |
njl |
Don't forget to pass shutdown events down to children first now that we handle them at the bus level too.
|
130114 |
05-Jun-2004 |
njl |
Disable wake GPEs in the reboot path as well as poweroff path. This fixes "stray irq 9" messages on my Thinkpad. It may also help with general reboot consistency although the recent hang on reboot was solved by acpi_cpu.c rev 1.39.
|
130113 |
05-Jun-2004 |
njl |
Rework acpi_cpu_idle() to select the next idle state before sleeping, not after. Unify the paths for all Cx states. Remove cpu_idle_busy and instead do the little profiling we need before re-enabling interrupts. Use 1 quantum as estimate for C1 sleep duration since the timer interrupt is the main reason we wake.
While here, change the cx_history sysctl to cx_usage and report statistics for which idle states were used in terms of percent. This seems more intuitive than counters. Remove the cx_stats structure since it's no longer used. Update the man page.
Change various types which do not need explicit size.
|
130080 |
04-Jun-2004 |
peter |
Work around the preemption problem in acpi_cpu.c for shutting down.
Submitted by: nate / jhb
|
129879 |
30-May-2004 |
phk |
Add missing <sys/module.h> includes
|
129831 |
29-May-2004 |
njl |
Decrease sleep_delay default to 1 second now that the machines that required the 5 second delay have been fixed.
|
129829 |
29-May-2004 |
njl |
Style cleanups, don't set the device description before the probe routine has completed successfully.
|
129813 |
28-May-2004 |
jhb |
Don't assume that the current setting (_CRS) of a PCI link device is correct. Instead, check it against the possible settings (_PRS) when the link is probed. This is important when using APIC mode but link devices still have PIC mode settings. This is also what Linux does.
Additional prodding by: Len Brown len dot brown at intel dot com
|
129811 |
28-May-2004 |
njl |
Style fixes.
|
129807 |
28-May-2004 |
njl |
Now that we properly disable GPEs before entering a sleep state, including S5 (soft off), we don't need to disable ACPI when powering off. This may fix some systems that don't power off correctly.
|
129806 |
28-May-2004 |
njl |
Style cleanups. "extern" is unneeded for function prototypes.
|
129805 |
28-May-2004 |
njl |
Update the new suspend/resume GPE methods to properly limit the GPE based on the destination sleep state. Add a method to restore the old state on resume. This is needed for the case of suspending to a very low state disabling a GPE (i.e. S4), resuming, and then suspending to a higher state (i.e. S3). This case should now keep the proper GPEs enabled.
|
129804 |
28-May-2004 |
njl |
Pass a pointer to the sleep state instead of casting gymnastics to pass the value itself in the pointer.
|
129803 |
28-May-2004 |
njl |
Fix paste-o.
|
129802 |
28-May-2004 |
njl |
Attach per-device sysctls to allow users to set whether or not a given device can wake the system. For example:
dev.root0.nexus0.acpi0.acpi_lid0.wake: 1 dev.root0.nexus0.acpi0.acpi_button0.wake: 1 dev.root0.nexus0.acpi0.pcib0.wake: 0 dev.root0.nexus0.acpi0.sio0.wake: 0
|
129800 |
28-May-2004 |
marcel |
Fix LP64 environments: cast a pointer type to intptr_t before casting to int and vice versa.
|
129783 |
27-May-2004 |
njl |
Restructure the wake GPE API. Now there are three functions:
acpi_wake_init: Evaluate _PRW and set the GPE type acpi_wake_set_enable: Enable or disable a device's GPE. acpi_wake_sleep_prep: Perform any last-minute changes to the device to prepare it for entering the given sleep state.
Also, walk the entire namespace when transitioning to a sleep state, disabling any GPEs which aren't appropriate for the given state. Transition acpi_lid and acpi_button to the new API.
This clears the way for non-ACPI-aware devices to wake the system (i.e. modems) and fixes a problem where systems power up after shutdown when a GPE is triggered.
|
129724 |
25-May-2004 |
njl |
Enable GPE at runtime rather than suspend time. This is to match the new behavior in ACPI-CA that defers GPE configuration. This is a temporary measure while reworking the GPE interface.
|
129696 |
25-May-2004 |
njl |
Remove call to _INI for thermal devices. ACPI-CA now calls _INI for Devices, ThermalZones, and Processors.
|
129692 |
25-May-2004 |
njl |
Changes to implement 20040514:
* Add calls to AcpiSetGpeType. We use wake/run as the type for lid and button switches since wake-only causes Thinkpads to immediately wake on the second suspend. Note that with wake/run, some systems return both wake and device-specific notifies so we don't register for system notifies for lid and button switches. * Remove the hw.acpi.osi_method tunable since it is not needed. * Always print unknown notifies for all types. * Add more cleanup for the EC if it fails to attach. * Use the GPE handle now that we parse it. This allows GPEs to be defined in AML GPE blocks. * Always use ACPI_NOT_ISR since it's ok to acquire a mutex in our thread which processes queued requests.
|
129594 |
22-May-2004 |
njl |
Revert the previous commit. The bus accessor macros do not check the return value for BUS_READ_IVAR and thus don't generate the proper NULL in cases where a device (i.e. on PCI) does not have a handle.
Found by: peadar, tjr
|
129395 |
18-May-2004 |
njl |
Use the simpler __BUS_ACCESSOR macros for ivars instead of defining them ourselves.
|
129197 |
14-May-2004 |
njl |
Add support for GPE being a package of { reference, gpe bit }. Rework the ECDT probe to pass all the parameters in a temporary struct. Note why we are mostly ok evaluating _GLK so early.
|
129168 |
13-May-2004 |
njl |
Add support for retrieving _GLK in the ECDT probe. Now we no longer always use the global lock at the beginning of the ECDT probe. Instead, we use the handle from the ECDT to call _GLK. Also, unify the device description.
|
129093 |
10-May-2004 |
jhb |
If an ACPI PCI-PCI bridge doesn't have a _PRT object, fall back to using the swizzle method for routing PCI interrupts across the bridge. This fixes problems with motherboards (typically laptops) whose BIOS doesn't provide a PRT for the AGP bridge even though there is a device entry for the bridge in the ACPI namespace.
Tested by: Kenneth Culver culverk at sweetdreamsracing dot biz
|
129021 |
07-May-2004 |
njl |
Change hw.acpi.cpu.cx_lowest to accept values in the form of C1, C2, ... Update power_profile to use the new format. Update the man page to reflect this and give more info on Cx states.
|
129014 |
06-May-2004 |
njl |
Rename acpi_cpu to cpu. Change the probe routine to early on reject devices it cannot attach to. This gets rid of extraneous but harmless device_probe_and_attach() errors. While I'm here, make the device description more useful. The !acpi case for cpu is handled by legacy0.
|
128993 |
06-May-2004 |
njl |
Select the highest valid (i.e., S3) sleep state for the default for the sleep button. Change the default for the lid switch to NONE. This can be overridden in /etc/sysctl.conf as desired.
|
128991 |
06-May-2004 |
njl |
Add back sys/reboot.h which is needed.
|
128990 |
06-May-2004 |
njl |
Make unnecessary globals static and remove unused includes.
Pointed out by: cscout
|
128989 |
06-May-2004 |
njl |
Fix setting debug strings via sysctl. Also, clean up the way we print debug strings.
|
128981 |
05-May-2004 |
njl |
Remove extra parentheses.
|
128979 |
05-May-2004 |
njl |
Add an MI implementation of the ACPI global lock routines and retire the individual asm versions. The global lock is shared between the BIOS and OS and thus cannot use our mutexes. It is defined in section 5.2.9.1 of the ACPI specification.
Reviewed by: marcel, bde, jhb
|
128656 |
26-Apr-2004 |
takawata |
Fix build breakage.
Submitted by: Xin LI <delphij@frontfree.net> PR: 65979
|
128655 |
26-Apr-2004 |
njl |
Move the call to AcpiEnterSleepStatePrep() to before we select the BSP (cpuid 0) as the processor. It mallocs some data and smp_rendezvous calls functions with locks held.
|
128652 |
26-Apr-2004 |
imp |
Fix two typos from PR: 65694
1) In pci.c, we need to check the child device's state, not the parent device's state. 2) In acpi_pci.c, we have to run the power state change after the acpi method when the old_state is > new state, not the other way around.
Submitted by: Dmitry Remesov PR: 65694
|
128607 |
24-Apr-2004 |
njl |
Disable interrupts while testing the timer. Not doing this unnecessarily added an arbitrary delay to our readings, causing us to use the ACPI-safe read method when not necessary. Submitted by: bde
Old: ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks BAD min = 3, max = 19, width = 16 ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks BAD min = 3, max = 19, width = 16 ACPI timer looks GOOD min = 3, max = 5, width = 2 ACPI timer looks GOOD min = 3, max = 4, width = 1 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
New: ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
Also, reduce unnecesary overhead in ACPI-fast by remove the barrier for reads. The timer in the ACPI-fast case is known to increase monotonically so there is no need to serialize access to it.
|
128561 |
22-Apr-2004 |
philip |
Add the ACPI Asus extras driver. Provides support for cool ACPI-controled gadgets (hotkeys, lcd, ...) on Asus laptops. I aim to closely track the acpi4asus project which implements these features in the Linux kernel.
If this breaks your laptop, please let me know how it does it :-)
Approved by: njl (mentor)
|
128543 |
22-Apr-2004 |
njl |
Fix stepping in ddb by not checking for a maximum interval. The ACPI-safe workaround was for hardware where the clock was not latched, not for hardware that was too slow. Also, make variable names more specific for ddb printing.
|
128528 |
21-Apr-2004 |
njl |
Add comments, including restoring the PIIX4 errata comment, to indicate what the ACPI-safe workaround is intended to fix. Requested by phk.
Set the bushandle and tag when attaching the timer, don't do it each time in read_counter(). Pointed out by bde.
Move test_counter() to the end. Staticize acpi_timer_reg.
|
128506 |
21-Apr-2004 |
njl |
Fix several bugs where 32-bit timers and wraparound were not properly supported. Symptoms of this bug included unnecessary use of ACPI-safe and a dmesg that has deltas of about 2^24:
ACPI timer looks BAD min = 2, max = 16777206, width = 16777204 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks BAD min = 2, max = 16777206, width = 16777204 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 2, max = 16777210, width = 16777208 ACPI timer looks BAD min = 4, max = 16777189, width = 16777185 ACPI timer looks GOOD min = 4, max = 5, width = 1 ACPI timer looks BAD min = 2, max = 7, width = 5 ACPI timer looks BAD min = 4, max = 16777189, width = 16777185
To fix this: * Use a 32 bit timecounter mask when the timer is 32 bits. * In test_counter(), use the acpi_TimerDelta function which handles 24/32 bit timers and wraparound.
Miscellaneous fixes: * Use C99 initializers for timecounter struct. * Use u_int and uint32_t where appropriate instead of unsigned. * Remove whitespace-only lines * Remove the old PIIX4 PCI workaround. The timecounter testing code has been in use for long enough to prove it's functional.
|
128504 |
21-Apr-2004 |
njl |
Remove extran parens.
|
128503 |
21-Apr-2004 |
njl |
Move the timer difference convenience function from acpi_cpu.c to make it globally available. acpi_TimerDelta() subtracts two readings from the ACPI PM timer and returns the difference. It properly distinguishes between 24-bit and 32-bit timers and handles wraparound.
|
128487 |
20-Apr-2004 |
njl |
Style fixes.
|
128468 |
20-Apr-2004 |
njl |
Allow the AC adapter device to be disabled with debug.acpi.disable="acad". Even though documented, this option was never enabled even in rev 1.1.
Submitted by: sos
|
128436 |
19-Apr-2004 |
njl |
Add a temporary workaround for acpi_AppendBufferResource() returning with a NULL crsbuf pointer. This shouldn't happen if it returns AE_OK. We'll figure out why this is happening later.
Submitted by: Bruno Ducrot <ducrot@poupinou.org>
|
128319 |
16-Apr-2004 |
njl |
Disable the new wake GPE behavior. With it enabled, my laptop won't stay suspended after the second try. Intel is working on a fix to properly differentiate the non-standard wake/runtime GPEs from wake-only GPEs.
|
128252 |
14-Apr-2004 |
njl |
Return an error immediately if asked to switch a non-existent consumer.
|
128249 |
14-Apr-2004 |
njl |
Remove a non-variable static and move other static variables to the same location.
|
128248 |
14-Apr-2004 |
njl |
Fix some warnings by commenting out unused code.
|
128247 |
14-Apr-2004 |
njl |
Only try to set the ACPI power state if the handle is valid. There was probably no problem with this except it may have had the side effect of registering a NULL consumer.
|
128240 |
14-Apr-2004 |
njl |
Unbreak the DDB build by replacing #includes that were deleted.
Pointed out by: Tai-hwa Liang, Xin LI Pointed hat to: njl
|
128228 |
14-Apr-2004 |
njl |
Style cleanups, M_ZERO instead of bzero.
|
128227 |
14-Apr-2004 |
njl |
Style cleanups, use M_ZERO instead of bzero, unify the !semaphore and semaphore return paths.
|
128226 |
14-Apr-2004 |
njl |
Style cleanup, plus properly backup partial resource allocation in AcpiOsInstallInterruptHandler() in the case of failure to initialize.
|
128225 |
14-Apr-2004 |
njl |
Style cleanups to reduce diffs to locking tree.
|
128224 |
14-Apr-2004 |
njl |
Style and printf message cleanups.
|
128222 |
14-Apr-2004 |
njl |
Use TRUE for a boolean and a style nit.
|
128220 |
14-Apr-2004 |
njl |
Update the name for edge triggered for the 20040402 import.
|
128150 |
12-Apr-2004 |
njl |
Remove a check for the return value added in rev 1.41. It's not an error to fail to turn off a fan, since the case is that it's usually already off.
|
128071 |
09-Apr-2004 |
njl |
Add MODULE_DEPEND entries so some of these drivers can eventually be loaded separately from ACPI (i.e., embedded use).
|
128058 |
09-Apr-2004 |
imp |
Omnibus PCI commit: o Save and restore bars for suspend/resume as well as for D3->D0 transitions. o preallocate resources that the PCI devices use to avoid resource conflicts o lazy allocation of resources not allocated by the BIOS. o set unattached drivers to state D3. Set power state to D0 before probe/attach. Right now there's two special cases for this (display and memory devices) that need work in other areas of the tree.
Please report any bugs to me.
|
128047 |
09-Apr-2004 |
njl |
Replace more ad-hoc versions of acpi_GetReference(). Since the type of Reference objects changed from ACPI_TYPE_ANY to ACPI_TYPE_LOCAL_REFERENCE in Oct. 2002, this may help systems where switching the cooler on failed. We support both types for now until this sorts out.
|
128046 |
09-Apr-2004 |
njl |
Include the prototype for acpi_GetReference.
|
128045 |
09-Apr-2004 |
njl |
Add support for packages as the first element of _PRW. This may allow some machines to enable wake events for more devices although I haven't seen a system yet that uses this form. Also, introduce acpi_GetReference() which retrieves an object reference from various types.
|
128036 |
08-Apr-2004 |
njl |
Unify on version 1 to be similar to the rest of the tree. After 5-stable branches, increment version on any API change visible to other modules.
|
128016 |
07-Apr-2004 |
jhb |
Implement an ACPI-aware pci_set_powerstate() method for PCI busses that are enumerated in the ACPI device tree. In addition to the normal PCI powerstate functionality, the ACPI _PSx methods are executed and ACPI PowerResources are switched on and off via the acpi_pwr_switch_consumer() function.
Glanced at by: imp, njl
|
127700 |
01-Apr-2004 |
njl |
Move the ivar accessing routines back to inlines (reverting acpivar.h rev 1.44 and acpi.c rev 1.96). Now gcc can handle larger inlines and we really need external drivers to be able to read their acpi ivars.
|
127681 |
31-Mar-2004 |
njl |
Staticize pnp methods, style fixes. Remove unused variable to unbreak kernel build.
|
127680 |
31-Mar-2004 |
takawata |
Add ACPI path in location string for ACPI namespace aware PCI device.
|
127679 |
31-Mar-2004 |
njl |
Add an interface to pass an argument to the resource parsing functions. This is just groundwork for changing sysresource behavior.
PR: Submitted by: Reviewed by: Approved by: Obtained from: MFC after:
|
127678 |
31-Mar-2004 |
takawata |
Style fix.
Pointed out by: njl
|
127609 |
30-Mar-2004 |
njl |
Disable serialize_methods and enable _OSI support by default. The former is necessary because some IBMs use recursive methods (pointed out by Robert Moore from Intel). The latter was a typo on my part. It was disabled by default when it should have been enabled.
|
127488 |
27-Mar-2004 |
takawata |
Add ACPI PnP string. This affects devinfo(8) output with -v option.
|
127316 |
22-Mar-2004 |
njl |
Use the correct length for appending an extended irq resource. This may have broken APIC routing. This bug has been present since rev 1.33.
|
127315 |
22-Mar-2004 |
njl |
Shorten some printfs to fit better. No other functional changes.
|
127314 |
22-Mar-2004 |
njl |
Whitespace and comment changes. No MD5 change to the object file.
|
127240 |
20-Mar-2004 |
njl |
Fix loop termination condition for parsing resources in _PRS buffers. This completes the effort to handle dependent functions, which are used in some machines for irq link resources. Also, clean up some nearby comments while I'm at it.
|
127193 |
19-Mar-2004 |
njl |
Move the poweroff handler to a separate function. Make sure it is run on the boot processor (cpuid == 0). Some chipsets do not power off the system if the shutdown handler runs on an AP.
|
127184 |
18-Mar-2004 |
njl |
Add tunables for disabling serialized method execution and disabling the new _OSI method. These can be used if these new features end up causing regression for users.
|
127156 |
18-Mar-2004 |
njl |
Support the DPF (start dependent function) resource type in parsing _PRS. This should fix this error people get attaching cardbus controllers:
pcib0: _PRS resource entry has unsupported type 2
|
127147 |
17-Mar-2004 |
njl |
Fix border error to allow systems that specify 100 for latency also use C2 and 1000 to use C3.
Submitted by: Bruno Ducrot <ducrot@poupinou.org> Tested by: Scott Lambert <lambert@lambertfam.org>
|
127135 |
17-Mar-2004 |
njl |
Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by: Mark Santcroos <marks@ripe.net> Reviewed by: imp, dfr, bde
|
126767 |
09-Mar-2004 |
njl |
Simplify some logic in converting a buffer to an integer.
|
126766 |
09-Mar-2004 |
njl |
Use an unsigned int instead of an int for the Get/Set Integer interface.
Pointed out by: le
|
126663 |
05-Mar-2004 |
njl |
Document a sysctl.
Submitted by: Craig Rodrigues <rodrigc@crodrigues.org>
|
126662 |
05-Mar-2004 |
njl |
A user can set tz_requested via the hw.acpi.thermal.tzX.active sysctl. The previous logic meant that if a user sets it to a minimal cooling value acpi_thermal will not use higher cooling levels. Reverse the logic so that the user requesting a level (say, 2) also gets 0 - 1 also.
PR: kern/61592 Submitted by: Andrew Thompson <andy@fud.org.nz>
|
126578 |
04-Mar-2004 |
njl |
Fix an off-by-one error and rework our EC space handler. Writing to address 0xFF would fail previously as AE_BAD_PARAMETER. It's unknown if this caused any actual problems.
|
126575 |
04-Mar-2004 |
njl |
Don't disable Cx support and throttling on machines with a P_BLK_LEN != 6 even though the spec mandates this. Some have a value of 5 to indicate throttling + C2 and some have 7 to indicate an extra C3 state. Support throttling if the value is >= 4, C2 for >= 5, and C3 for >= 6.
|
126573 |
04-Mar-2004 |
njl |
Add a "quirks" value to disable quirks handling for a given boot. Also, disable quirks if booting with a custom DSDT. Add a quirk to disable loading ACPI so known bad systems can be completely blacklisted.
|
126560 |
03-Mar-2004 |
njl |
Change to acpi_{Get,Set}Integer to provide both methods. Convert all callers to the new API.
Submitted by: Mark Santcroos <marks@ripe.net>
|
126517 |
03-Mar-2004 |
njl |
Add support for quirks for acpi tables. Key off OEM vendor and revision. Sort acpi debug values. Change "disable" to "disabled" to match rest of the kernel. Remove debugging from acpi_toshiba since it was only used for probe/attach.
|
126430 |
01-Mar-2004 |
njl |
Add the ACPI standard video extensions driver. I've done some style cleanup but a bit more reamins to be done. For now, it is usable.
Submitted by: Taku YAMAMOTO <taku@cent.saitama-u.ac.jp>
|
126388 |
28-Feb-2004 |
njl |
Call _INI on Thermal Zones as well as devices.
|
126080 |
21-Feb-2004 |
phk |
Device megapatch 4/6:
Introduce d_version field in struct cdevsw, this must always be initialized to D_VERSION.
Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
|
126076 |
21-Feb-2004 |
phk |
Device megapatch 1/6:
Free approx 86 major numbers with a mostly automatically generated patch.
A number of strategic drivers have been left behind by caution, and a few because they still (ab)use their major number.
|
126015 |
19-Feb-2004 |
njl |
Use ACPI_NEXT_RESOURCE instead of defining our own copy. The one provided with ACPI-CA is identical now.
|
126014 |
19-Feb-2004 |
njl |
Do not remove the fixed handlers. Several systems (e.g., ASUS) only return events on the fixed handler even after defining a duplicate in the AML. While this violates the spec, hopefully we can get by with leaving both installed.
|
125986 |
19-Feb-2004 |
njl |
Fix problem caused by previous commit where some users' buttons stopped returning events. Don't disable the event when removing the handler because it still needs to be enabled for the other handler. Also, remove duplicate AcpiEnableEvent calls since the install function now does this for us.
|
125795 |
14-Feb-2004 |
njl |
Fix hw.acpi.os_name by renaming it to hw.acpi.osname. The "_name" suffix is reserved by the loader, and thus any tunable name with that suffix will be silently discarded.
Document this in the header and man page so that other developers do not develop so many bumps on the head after banging it against the wall.
Detective work by: Mark Santcroos, grehan
|
125745 |
12-Feb-2004 |
jhb |
Fix a whitespace nit.
|
125679 |
11-Feb-2004 |
njl |
Prefer buttons defined in the AML over the ones in the FADT. Some systems define power/sleep buttons in both places but only deliver notifies to the ones defined in the AML.
Also, reduce length of various function handler names.
PR: Submitted by: Reviewed by: Approved by: Obtained from: MFC after:
|
125526 |
06-Feb-2004 |
philip |
Make all ACPI debug layers unique again. This makes debugging a more pleasant experience (for certain definition of 'pleasant').
Submitted by: Mark Santcroos <marks@ripe.net> Approved by: njl (mentor)
|
125366 |
03-Feb-2004 |
njl |
Notify the user (at kern.emerg) that the system will be shutting down if it is still above the critical temperature on the next poll cycle. This is a 10 second advance notice by default. Document the private (non-standard) notify we will be using with devd(8).
|
125335 |
02-Feb-2004 |
njl |
If the temperature is at _HOT or _CRT for 3 sequential readings, shutdown the system. Also, decrease the poll interval to 10 seconds from 30 seconds. This is needed because some systems will report an invalid high temperature for one poll cycle. It is suspected this is due to the embedded controller timing out. A typical value is 138C for one cycle on a system that is otherwise 65C. This prevents the system from prematurely shutting down after one invalid reading. It will still shut down after 30 seconds of high temperature, which is the same as previous default behavior.
Tested by: Scott Lambert <lambert AT lambertfam.org>
|
125135 |
28-Jan-2004 |
roam |
Add an ACPI_FUNCTION_TRACE() to the newly-added acpi_Startup() routine to get the ACPI_DEBUG case (and LINT in particular) to build.
Reviewed by: jhb, njl Approved by: jhb
|
125067 |
27-Jan-2004 |
njl |
Add TUNABLE_STR to make "hw.acpi.os_name" more correct. However, the call to getenv_string() still doesn't work.
|
125047 |
26-Jan-2004 |
jhb |
Move the code to initialize ACPI-CA into a separate acpi_Startup() function that other modules can call to initialize ACPI-CA before the new-bus probe and change acpi_identify() to call it.
Reviewed by: njl
|
124760 |
20-Jan-2004 |
jhb |
Use getenv_int() rather than reimplementing it.
|
124497 |
13-Jan-2004 |
jhb |
Add a component constant for ACPI_TOSHIBA to fix compilation of acpi_toshiba(4) driver with ACPI_DEBUG and thus fix LINT on i386.
|
124439 |
12-Jan-2004 |
njl |
Bite the bullet and uncomment the shutdown() in case we hit the _CRT or _HOT temperatures. We have to do this at some point to keep from getting imp(tm) melted hardware.
|
124314 |
09-Jan-2004 |
njl |
Clean up the acpi announce message of trailing spaces.
|
124310 |
09-Jan-2004 |
njl |
Expand the check for overriding the OS name to override _OS* (including _OS_, _OS, and _OSI). This should fix this option for people who reported it not changing anything.
|
124091 |
03-Jan-2004 |
njl |
Delete the region we are passed if that is the requested operation. This should fix the problem with removing an address space handler although we don't currently use that capability so it's unlikely anyone saw this problem.
|
124029 |
31-Dec-2003 |
njl |
Use the appropriate values for the notifies. No change in behavior since both notifies result in the same function being called.
Found by: documenting the code
|
123942 |
28-Dec-2003 |
njl |
Don't attach throttling if the P_BLK is 0, even if the P_BLK_LEN is 6. This is more strict but no known systems have this problem.
|
123867 |
26-Dec-2003 |
jhb |
Fix acpi_MatchHid() to check the compatibility ID's if the hardware ID doesn't match.
Submitted by: marcel
|
123781 |
23-Dec-2003 |
njl |
Fix locking broken by recent _CID changes. Always be sure to unlock in the error case.
|
123777 |
23-Dec-2003 |
njl |
Update to use the new package routines instead of rolling our own macros.
|
123776 |
23-Dec-2003 |
njl |
Remove the device_t parameter from package routines that only used it to print an error message. Update all callers of the package routines.
|
123738 |
23-Dec-2003 |
peter |
Don't use NULL (pointer) when we're testing for a count of 0 (integer).
|
123642 |
18-Dec-2003 |
kan |
Initialize acpi buffer structs early in order to avoid freeing unallocated pointers later in done: section.
|
123624 |
18-Dec-2003 |
njl |
Remove power profile support from acpi_cpu, it will be managed by a script run from devd(8).
|
123619 |
18-Dec-2003 |
njl |
Add support for multiple CIDs since _CID can contain a package of values. Implement this in acpi_MatchHid() and acpi_isa_get_compatid(). This should fix mouse support for some users.
Move all users of AcpiGetObjectInfo() to use dynamic storage instead of a devinfo on the stack. This is necessary since ACPI-CA needs to allocate different sized arrays for the CompatList.
|
123496 |
12-Dec-2003 |
njl |
Fix throttling to use the proper mask. The bug resulted in only two throttling values being available regardless of the CPU's capabilities. This has been broken since rev 1.1. Also clarify a comment.
Submitted by: Taku YAMAMATO <taku@cent.saitama-u.ac.jp>
|
123400 |
10-Dec-2003 |
jhb |
Trim trailing whitespace.
|
123337 |
09-Dec-2003 |
njl |
Use sbufs instead of snprintf for parsing debug strings.
|
123334 |
09-Dec-2003 |
njl |
Delete madt.h since definitions are now used from actbl.h
|
123325 |
09-Dec-2003 |
njl |
We don't need to call _INI on processor objects now that ACPI-CA does this as it should.
|
123132 |
03-Dec-2003 |
jhb |
Update this driver to be more module friendly: - Dynamically allocate the cpu_softc[] array based on mp_maxid instead of using a statically sized array that depended on 'options SMP'. - Use mp_maxid rather than MAXCPU when walking all the CPUs looking for a match. - Always call smp_rendezvous() since UP kernels now provide this. - Use mp_ncpus rather than cpu_ndevices when determining if we need to disable C3 for SMP machines.
Approved by: re (rwatson) Reviewed by: njl
|
123007 |
27-Nov-2003 |
njl |
* If a processor's softc is NULL, use C1 since there is no ACPI processor object for this CPU. This occurs for logical CPUs which do not have an associated processor object (e.g., HTT).
Approved by: re (rwatson)
|
122995 |
26-Nov-2003 |
njl |
* Add acpi_pcpu_get_id(idx, *acpi_id, *cpu_id) which fetches the idx'th present CPU with pc_acpi_id equal to *acpi_id. If *acpi_id does not match that processor's pc_acpi_id, return the value for ProcId derived from the MADT in *acpi_id. If pc_acpi_id is 0xffffffff, always override it with the value of *acpi_id. Finally, return pc_cpuid in *cpu_id and use that as our primary key.
* Use pc_cpuid as our unique key because we know it is valid since MD code set it. The values for ProcId in the ASL and MADT don't match up on some machines (!), forcing us to fall back to ordered probing in that case.
* Remove some #ifdef SMP since the refcount doesn't hurt performance and will be needed for dynamic _CST objects. Only one #ifdef SMP (for smp_rendezvous) remains.
* Hook up SMP in the compile flags in the Makefile.
Tested by: marcel, truckman Approved by: re (scottl)
|
122928 |
20-Nov-2003 |
jhb |
Fix a typo in my patches to support extended IRQ resources that broke the type checking for _PRS for a link device's interrupt resources.
Approved by: re (scottl)
|
122926 |
20-Nov-2003 |
jhb |
Try all of the possible interrupts for a link device when programming boot-disabled devices instead of skipping the last interrupt. This is especially important for devices that only have one interrupt as this bug was keeping any interrupt from being tried at all.
Reviewed by: msmith Approved by: re (scottl)
|
122904 |
19-Nov-2003 |
njl |
* Add a DEVMETHOD for acpi so that child detach methods get called. Add an acpi_cpu method for shutdown that disables entry to acpi_cpu_idle and then IPIs/waits for threads to exit. This fixes a panic late in reboot in the SMP case.
* In the !SMP case, don't use the processor id filled out by the MADT since there can only be one processor. This was causing a panic in acpi_cpu_idle if the id was 1 since the data was being dereferenced from cpu_softc[1] even though the actual data was in cpu_softc[0] (which is correct).
* Rework the initialization functions so that cpu_idle_hook is written late in the boot process.
* Make the P_BLK, P_BLK_LEN, and cpu_cx_count all softc-local variables. This will help SMP boxes that have _CST or multiple P_BLKs. No such boxes are known at this time.
* Always allocate the C1 state, even if the P_BLK is invalid. This means we will always take over idling if enabled. Remove the value -1 as valid for cx_lowest since this is redundant with machdep.cpu_idle_hlt.
* Reduce locking for the throttle initialization case to around the write to the smi_cmd port. Add disabled code to write the CST_CNT. It will be enabled once _CST re-evaluation is tested (post 5.2R).
Thank you: dfr, imp, jhb, marcel, peter Tested by: rwatson, Harald Schmalzbauer <h@schmalzbauer.de> Approved by: re (rwatson)
|
122766 |
15-Nov-2003 |
njl |
Implement Cx CPU idle states and updated throttling support.
* Use the cpu_idle_hook() to do idling for C1-C3. * Use both _CST and the FADT to detect Cx states. * Use both _PTC and P_CNT for controlling throttling. * Add a notify handler to detect changes in _CST and _PSS * Call the _INI function for each processor if present. This will be done by ACPI-CA in the future. * Fix a bug on SMP systems where CPUs will attach multiple times if the bus is rescan. * Document new sysctls for controlling idling.
|
122765 |
15-Nov-2003 |
njl |
Add acpi_package.c with routines for validating packages and pulling various data types from them. This is loosely based on the acpi_cmbat macros (by Mike Smith) and will eventually replace them.
|
122764 |
15-Nov-2003 |
njl |
Add acpi_bus_alloc_gas() for allocating a memory or IO resource from its Generic Address Structure.
|
122706 |
14-Nov-2003 |
jhb |
Improve support for extended IRQ resources: - For acpi_pci_link_entry_dump(), add a few helper functions to display the trigger mode, polarity, and sharemode of an individual IRQ resource. These functions are then called for both regular and extended IRQ resources. - In acpi_pci_link_set_irq(), use the same type of IRQ resource (regular vs. extended) for the new current resource as the type of the resources from _PRS. - When routing an interrupt don't ignore extended IRQ resources. Also, use the same type of IRQ resource (regular vs. extended) for the new current resource when as the type of the resource from _PRS.
Tested by: peter
|
122577 |
12-Nov-2003 |
jhb |
Fix some typos.
|
122565 |
12-Nov-2003 |
jhb |
Reindent to non-style(9) compliant 4 space indent to match rest of file.
|
122564 |
12-Nov-2003 |
jhb |
Add an ACPI_FUNCTION_TRACE() invocation to acpi_OverrideInterruptLevel() to fix compile with ACPI_DEBUG.
Reported by: tinderbox
|
122500 |
11-Nov-2003 |
jhb |
Add an acpi_OverrideInterruptLevel() method that OSPM can use to override the InterruptLevel used for the SCI.
|
121493 |
25-Oct-2003 |
njl |
Add devctl(4) notify support to ACPI. Various subsystems now notify userland whenever events occur. See the example in devd.conf below to see how to use it.
|
121239 |
19-Oct-2003 |
njl |
Disable irqs before entering the power-off state. This is not known to fix any problems but is similar to how Linux implements this function.
|
120662 |
02-Oct-2003 |
njl |
If requested to Sleep for less than our hz granularity (e.g., 10 ms), use DELAY instead of tsleep.
Submitted by: peter
|
120607 |
30-Sep-2003 |
njl |
Revert 1.24. It causes a hang on shutdown for Marcel. This is due to AcpiEnterSleepState() calling a long AcpiOsStall() with interrupts disabled. This fix will instead be added to ACPI-CA.
PR: Submitted by: Reviewed by: Approved by: Obtained from: MFC after:
|
120571 |
29-Sep-2003 |
njl |
If asked to stall for more than 100 us (which is specified as the max in the ACPI standard), call sleep instead since that is probably what the caller meant.
Mentioned by: peter
|
120494 |
26-Sep-2003 |
njl |
Make debug.acpi.level and debug.acpi.layer sysctls that can be set with the strings found in acpi(4). Also make acpi_ca_version a string so it is more readable.
|
120453 |
26-Sep-2003 |
njl |
Consistently print attach messages.
|
120450 |
26-Sep-2003 |
njl |
Sort debugging levels and update the man page to match reality. Also update man page to reflect iasl(8) import.
|
120327 |
22-Sep-2003 |
njl |
Fix the ACPI_DEBUG case.
Reported by: Larry Rosenman <ler@lerctr.org> PR: Submitted by: Reviewed by: Approved by: Obtained from: MFC after:
|
120317 |
21-Sep-2003 |
phk |
Make this compile.
|
120308 |
21-Sep-2003 |
njl |
Add support for fixed event buttons defined in the DSDT (HID "ACPI_FSB" and "ACPI_FPB").
Pointed out by: Linux
|
120186 |
18-Sep-2003 |
njl |
Add necessary newlines.
|
120185 |
18-Sep-2003 |
njl |
Shorten the message announcing fixed power/sleep buttons.
|
120155 |
17-Sep-2003 |
iwasaki |
Add pci_resume() to reestablish interrupt routing after suspend/resume. Especially after hibernation, interrupt routing went back to initial status on some machines.
|
120103 |
15-Sep-2003 |
njl |
Bump the EC timeout from 50 to 100 ms. I believe the underlying issue is global lock contention as symptoms only appear under heavy load (i.e. the nightly periodic run).
|
120087 |
15-Sep-2003 |
njl |
Only enable S4BIOS by default if the FACS says it is available. The user can override this with a sysctl.
Be sure to return the acpi_SetSleepState return value to userland.
|
120061 |
14-Sep-2003 |
njl |
Print notify values as hex.
|
120036 |
13-Sep-2003 |
njl |
Add the -i flag to acpiconf(8) to retrieve battery information. Rename a few structure elements.
|
119974 |
11-Sep-2003 |
njl |
Add a system notify handler in addition to the device notify handler. At least some Toshiba notebooks use a Notify of 0 or 1 for this.
PR: Submitted by: Hiroyuki Aizu <aizu@navi.org>
|
119969 |
10-Sep-2003 |
marcel |
Extend the ACPI resource handling to make use of the BUS_CONFIG_INTR() method. This is necessary on ia64 where it's known that serial interfaces described in the ACPI namespace may not have the well-known IRQs assigned to them. This confuses us in thinking they are PCI based interrupts and wrongly program the APIC.
|
119946 |
10-Sep-2003 |
jhb |
Move the definitions for ACPI MADT table entries not present in the ACPICA distribution to a MI header so it can be shared with other architectures.
|
119903 |
09-Sep-2003 |
njl |
Disallow attempts to suspend to S0. It was only enabled for testing. Print a more informative message if a sleep state is not supported by BIOS. Add comments.
|
119739 |
04-Sep-2003 |
njl |
Don't free the buffer if it wasn't actually allocated.
|
119549 |
29-Aug-2003 |
njl |
Use the ACPICA AcpiEnterSleepStateS4bios instead of rolling our own. This change also disables interrupts around non-S4 suspends whereas before we did not do this. Our version of AcpiEnterSleepStateS4bios was almost identical to the ACPICA version.
|
119539 |
28-Aug-2003 |
jhb |
- Rename PCIx_HEADERTYPE* to PCIx_HDRTYPE* so the constants aren't so long. - Add a new PCIM_HDRTYPE constant for the field in PCIR_HDRTYPE that holds the header type. - Replace several magic numbers with appropriate constants for the header type register and a couple of PCI_FUNCMAX. - Merge to amd64 the fix to the i386 bridge code to skip devices with unknown header types.
Requested by: imp (1, 2)
|
119529 |
28-Aug-2003 |
njl |
Style and whitespace changes. Also, make the ivar functions non-inline since inlining failed due to the size of BUS_*
|
119418 |
24-Aug-2003 |
obrien |
Use __FBSDID(). Also some minor style cleanups.
|
119281 |
22-Aug-2003 |
imp |
Prefer new location of pci include files (which have only been in the tree for two or more years now), except in a few places where there's code to be compatible with older versions of FreeBSD.
|
119097 |
19-Aug-2003 |
takawata |
Update my mail address on copyright notice.
Noticed by: njl
|
118987 |
16-Aug-2003 |
phk |
Give timecounters a numeric quality field.
A timecounter will be selected when registered if its quality is not negative and no less than the current timecounters.
Add a sysctl to report all available timecounters and their qualities.
Give the dummy timecounter a solid negative quality of minus a million.
Give the i8254 zero and the ACPI 1000.
The TSC gets 800, unless APM or SMP forces it negative.
Other timecounters default to zero quality and thereby retain current selection behaviour.
|
118937 |
15-Aug-2003 |
njl |
Revert part of rev. 1.16 -- reinstate system notify handler. It turns out at least the Casio FIVA requires this.
Requested by: takawata
|
118926 |
15-Aug-2003 |
njl |
De-inline functions which do not need to be inline. Move the DEVMETHOD block to where it is in similar drivers.
|
118925 |
15-Aug-2003 |
njl |
Don't install a system notify handler. Move the device notify handler installation to just before we're ready to handle events. Make a loop more readable (no functional change).
|
118924 |
15-Aug-2003 |
njl |
Fix a couple changes that were incorrect in updating for 0619. Only unlock the hardware mutex if it is held. Re-add calls to Enable/Clear fixed events.
This is not known to have caused problems. Bug symptoms might have included instability after an aborted suspend attempt or power/sleep buttons not being enabled.
|
118783 |
11-Aug-2003 |
njl |
Style cleanups to match the rest of this directory. For acpi_battery.c, remove unused includes.
|
118642 |
08-Aug-2003 |
njl |
Default to 5 seconds before sleeping to give some machines time to stabilize. This doesn't break anything on my laptop and some claim it helps them.
|
118607 |
07-Aug-2003 |
jhb |
Consistently use the BSD u_int and u_short instead of the SYSV uint and ushort. In most of these files, there was a mixture of both styles and this change just makes them self-consistent.
Requested by: bde (kern_ktrace.c)
|
118216 |
30-Jul-2003 |
njl |
Add and document the hw.acpi.ec.poll_timeout tunable.
|
118049 |
26-Jul-2003 |
takawata |
Enable wake up GPE before shutdown, not only for sleeping.
|
118018 |
25-Jul-2003 |
njl |
Add an informational debugging printf of the maximum time spent in EcEventWait(). If you get AE_HARDWARE_NO_RESPONSE errors, please enable this info by setting hw.acpi.verbose=1 in loader.conf.
|
117810 |
20-Jul-2003 |
njl |
Do not call acpi_MatchHid() for all probe cases since it accesses the namespace. To compensate for it only being used in the !ECDT case, use a more robust approach to indicate a device was probed via ECDT by setting the private ivar to be &acpi_ec_devclass. Without the acpi_MatchHid() call now, it might have been possible for a non-EC device to have had its magic match our previous flag.
Pointed out by: takawata
|
117809 |
20-Jul-2003 |
njl |
Close a race condition by passing status retrieved via a non-SCI call to EcGpeQueryHandler on to any waiting threads through the softc. Similar behavior was in the original version.
Also: * Merge EcQuery into EcGpeQueryHandler to simplify locking * Hold EcLock from the initial read of the CSR down to the wakeup or until after the query command has been processed. * ec_gpebit only needs to be a UINT8
|
117796 |
20-Jul-2003 |
njl |
Clarify the ACPI shutdown messages.
|
117795 |
20-Jul-2003 |
njl |
Add ECDT (ACPI 2.0) support. This allows the EC to be enabled before the namespace has been evaluated. Machines with ACPI 2.0 expect this behavior and have AML which calls EC functions early in the boot process. If the ECDT is not available, fall back to original probe behavior.
Other minor changes: * Add GPE bit and GLK usage to the device announcement * Always use the global lock in the ECDT case, but potentially downgrade to not using it if _GLK is 0 once the namespace is available. This is announced with "Changing GLK from 1 to 0" * Remove the acpi_object_list definitions which were earlier deprecated
Ideas from: takawata
|
117699 |
17-Jul-2003 |
jhb |
Fix a bogon in the previous commit. When suppressing multiple isab devices, we have to allow for the case when the isab0 device is ourselves.
Tested by: markm
|
117649 |
15-Jul-2003 |
njl |
Change the msleep part of EcWaitEvent to be a separate loop, fixing a problem that for some very slow ECs (~6 ms occasionally) causes a timeout. Also finish resource cleanup in the error case in attach.
Tested by: ume
|
117648 |
15-Jul-2003 |
njl |
Remove old defines since they are no longer used.
|
117534 |
14-Jul-2003 |
marcel |
Fix build breakage on ia64. The second argument of AcpiOsReadable() and AcpiOsWritable() have type ACPI_SIZE and not UINT32.
|
117530 |
13-Jul-2003 |
njl |
Update code to work with 0619 dist
* Use ACPI_BUFFER as the type for AcpiGetObjectInfo * Remove AcpiEnableEvent/AcpiClearEvent for ACPI_EVENT_FIXED (power/sleep buttons) as they are no longer needed * Change calls to use the new GPE functions * Add AcpiOs*Lock functions
|
117384 |
10-Jul-2003 |
njl |
Rewrite much of the embedded controller driver. * Always use polled mode. The intr approach did not work for many controllers and required the hw.acpi.ec.event_driven workaround. * Only use an edge (not level) triggered GPE handler * Add sc->ec_mtx for locking operations to a single EC. There were many race conditions earlier between an SCI event and EcRead/Write. * Use 1 ms as the global lock timeout * Only acquire global lock if _GLK != 0 * Update EcWaitEvent to use an incremental backoff delay in its poll loop. Wait 50 ms max instead of 10. Most ECs respond in < 5 us (50 us when heavily loaded). However, some time out occasionally even with a 10 ms timeout. For delays past 1 ms, use msleep instead of DELAY to give SCI interrupts a chance to occur. * Add EcCommand to send a command and wait for the appropriate event. * The hw.acpi.ec.event_driven tunable is no longer applicable and has been removed.
Ideas from: Linux
|
117358 |
09-Jul-2003 |
jhb |
- Fix a typo in the call to acpi_disabled() in probe() by removing an extra trailing space. - Don't bother probing a generic ISA bus device if isab0 already exists. Some BIOSes place an ACPI psuedo-device with the HID of a generic ISA bus device under the PCI-ISA bridge device. This is not the best solution but will work for now. The isa bus driver only allows for one ISA bus anyways.
|
117339 |
08-Jul-2003 |
jhb |
Add an ACPI to ISA psuedo bridge driver. It attaches an isab(4) device to ACPI nodes with the plug and play ID's defined for a "Generic ISA Bus Device" as defined in section 10.7 of the ACPI 2.0 specification. This gives machines like the Libretto that contain a fake ISA bus that is not connected via a PCI-ISA bridge an ISA bus for ISA devices to attach to.
Tested by: markm
|
117167 |
02-Jul-2003 |
jhb |
- Use the new resource_disabled() helper function to see if devices are disabled. - Change the apm driver to match the acpi driver's behavior by checking to see if the device is disabled in the identify routine instead of in the probe routine. This way if the device is disabled it is never created.
Note that a few places (ips(4), Alpha SMP) used "disable" instead of "disabled" for their hint names, and these hints must be changed to "disabled". If this is a big problem, resource_disabled() can always be changed to honor both names.
|
117115 |
01-Jul-2003 |
tmm |
Add a new PCI interface method, assign_interrupt, to determine the interrupt to be used for a device. This is intended solely for internal use of PCI bus implementations, and exists so that PCI bus drivers implementing special interrupt assignment methods which require additional work at the bus level to work right can be easily derived from the generic driver (or any other one) without resorting to hacks.
It will be used in the sparc64 ofw_pcibus driver, which will be committed shortly.
Make use of this method in the generic implementation, and add it to the method table of bus drivers derived from the PCI one.
Reviewed by: imp, -hackers
|
116927 |
27-Jun-2003 |
njl |
Whitespace cleanups (verified with MD5 1832ce5ede6c58c844dfb53fd48f0eea). Also clarify a macro expansion with an XXX. I will be fixing access to Acpi Global Lock in a subsequent commit.
|
115427 |
31-May-2003 |
peter |
Add the MD ifdefs for amd64 to point to the IO space bustag/handle.
Approved by: re ("safe" amd64 support)
|
114977 |
13-May-2003 |
jhb |
Add some extra #ifdef stubs so that this compiles on 4.8.
Approved by: re (rwatson/bmah)
|
114949 |
12-May-2003 |
njl |
Move some printfs under bootverbose since they are not true errors.
Approved by: re (bmah)
|
114442 |
01-May-2003 |
jhb |
Catch up to reworked debugging levels in latest Intel import.
|
114277 |
30-Apr-2003 |
marcel |
o Don't announce that the timer is good when in fact it isn't timing at all (ie reads yield constant values). Display the width as the difference between max and min so that constant timers have width zero. o Get the address of the timer from the XPmTmrBlk field instead of the V1_PmTmrBlk field. The former is a generic address and can specify a memory mapped I/O address. Remove <machine/bus_pio.h> to account for this. The timer is now properly configured on machines with ACPI v2 tables, whether PIO or MEMIO. Note that the acpica code converts v1 tables into v2 tables so the address is always present in XPmTmrBlk. o Replace the TIMER_READ macro with a call to the read_counter() function and add a barrier to make sure that we observe proper ordering of the reads.
|
114246 |
29-Apr-2003 |
njl |
Support functions for the new ACPI import. * AcpiOsDerivePciId(): finds a bus number, given the slot/func and the acpi parse tree. * AcpiOsPredefinedOverride(): use the sysctl hw.acpi.os_name to override the value for _OS.
Ideas from: takawata, jhb Reviewed by: takawata, marcel Tested on: i386, ia64
|
113366 |
11-Apr-2003 |
iwasaki |
Add new sysctl MIB (hw.acpi.supported_sleep_state) to indicate the list of supported sleep state. This should help people understand what following message means.
acpi0: AcpiGetSleepTypeData failed - AE_NOT_FOUND
MFC after: 3 days
|
112581 |
25-Mar-2003 |
jake |
Fix 2 vm_offset_t -> vm_paddr_t missed in previous commit.
Sponsored by: DARPA, Network Associates Laboratories
|
111948 |
06-Mar-2003 |
takawata |
Add integer value of _CID handling. If _CID is string, it will need more complicated handling to distinguish bus other than ISA.
Submitted by: Paul Wankadia <junyer@gmx.net>
|
111815 |
03-Mar-2003 |
phk |
Gigacommit to improve device-driver source compatibility between branches:
Initialize struct cdevsw using C99 sparse initializtion and remove all initializations to default values.
This patch is automatically generated and has been tested by compiling LINT with all the fields in struct cdevsw in reverse order on alpha, sparc64 and i386.
Approved by: re(scottl)
|
111750 |
02-Mar-2003 |
phk |
Use canonical form for cdevsw initialization.
|
111056 |
17-Feb-2003 |
imp |
Move the pnp and location info into the common pci bus. Make all known pci busses implement this.
Also minor comment smithing in cardbus. Fix copyright to this year with my name on it since I've been doing a lot to this file.
Reviewed by: jhb
|
110894 |
15-Feb-2003 |
takawata |
Allow non-privilaged user to retrive battery or AC line information.
Reviewed by: rwatson
|
109760 |
23-Jan-2003 |
njl |
More useful announce message containing current speed of CPU
|
109247 |
14-Jan-2003 |
njl |
For the cpu throttling message, s/enabled/available
Requested by: many
|
108533 |
01-Jan-2003 |
schweikh |
Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup, especially in troff files.
|
108345 |
28-Dec-2002 |
rwatson |
Change ACPI make_dev() calls to use UID_ and GID_ constants rather than hard-coded uids and gids.
Switch the device to a group of wheel instead of operator.
Narrow down the permissions on the device to require root privilege to manipulate the system power state. It may be that we can broaden access to the device after review of the access control in ACPI.
Submitted by: kris Reviewed by: takawata
|
108196 |
23-Dec-2002 |
marcel |
Fix a De Morgan bug: If we only expect a memory range OR an I/O port range, then we should ignore a resource if it's NOT a memory range AND NOT an I/O port range. The OR in the condition caused us to ignore perfectly valid memory addresses.
While here, remove redundant parenthesis and reindent the debug print to avoid long lines.
|
107753 |
11-Dec-2002 |
takawata |
Add sysctl knob to stop disabling acpi on shutdown.
Approved by: re(jhb)
|
107328 |
27-Nov-2002 |
iwasaki |
Resolve conflicts arising from the ACPI CA 20021118 import.
|
107307 |
27-Nov-2002 |
iwasaki |
Disable debug output from acpi_pci_link. There were no serious problem reports on this in spite of my concern.
To get debug output from acpi_pci_link, just enable bootverbose flag in usual manner (boot -v).
Approved by: re
|
107249 |
25-Nov-2002 |
jhb |
- Assume a bus number of zero if evaluating _BBN fails, not if it succeeds. This was effectively rendering _BBN useless. - Cleanup handling of the busok variable a bit.
Submitted by: marcel (1) Approved by: re (rwatson)
|
107199 |
24-Nov-2002 |
iwasaki |
Add `if (!cold)' checkings for functions which is called via SYSINIT. Loading acpi.ko with kldload is disallowed, however some functions were executed unexpectedly.
Approved by: re
|
107173 |
22-Nov-2002 |
jhb |
According to the ACPI spec, the bus number of the child PCI bus of a host to PCI bridge can be read be evaluating the _BBN method of the host to PCI device. Unfortunately, there appear to be some lazy/ignorant/moronic/ whatever BIOS writers that return 0 for _BBN for all host to PCI bridges in the system. On a system with a single host to PCI bridge this is not a problem as the child bus of that single bridge will be bus 0 anyway. However, on systems with multiple host to PCI bridges and l/i/m/w BIOS writers this is a major problem resulting in all but the first host to PCI bridge failing to attach. So, this adds a workaround.
If the _BBN of a host to PCI bridge is zero and pcib0 already exists and is not us, the we use _ADR to look up our PCI function and slot (we currently assume we are on bus 0) and use that to call host_pcib_get_busno() to try and extract our bus number from config registers on the host to PCI bridge device. If that fails, then we make an evil assumption that ACPI's _SB_ namespace lays out the host to PCI bridges in ascending order and use our pcib unit number as our bus number.
Approved by: re
|
106377 |
03-Nov-2002 |
iwasaki |
Add status initialization code for acpi_cmbat and acpi_acad, acpi_cmbat_init_battery() and acpi_cmbat_init_acline() respectively. Call acpi_cmbat_init_battery() from acpi_cmbat_resume() too just in case. This is a workaround for embedded controller operations which is unstable for about a minute (typically 30 or 40 sec.) at boot time.
|
106262 |
31-Oct-2002 |
iwasaki |
Don't examine ACPI_STA_ENABLE bit of device's_STA object on initial state. Instead, use ACPI_STA_PRESENT and ACPI_STA_FUNCTIONAL for it. In some ACPI BIOS implementations, boot disabled devices don't have ACPI_STA_ENABLE bit in _STA object. Also it is not fatal if getting current IRQ of boot disabled devices is failed in initial state.
And minor fixes.
|
106261 |
31-Oct-2002 |
iwasaki |
Interpret new loader tunable "hw.acpi.verbose" to turn verbose mode on at boot time.
|
106255 |
31-Oct-2002 |
iwasaki |
Invoke 3 ACPI task threads as default if option ACPI_MAX_THREADS is not defined. To make previous default behavior (ACPI_MAX_THREADS undefined), define option ACPI_MAX_THREADS as 0.
|
106158 |
29-Oct-2002 |
jhb |
Add a missing newline to the end of a device_printf().
Reported by: Michael G. Petry <petry@NetMasters.Com>
|
105857 |
24-Oct-2002 |
iwasaki |
Add new loader tunable hw.acpi.ec.event_driven so that we control EcWaitEventIntr()'s behavior. Some EC controllers require this for working properly (including sleep/wakeup).
|
105282 |
16-Oct-2002 |
jhb |
Catch up to changes in acpivar.h to add support for using ACPI on 4-stable systems.
Sponsored by: The Weather Channel
|
105281 |
16-Oct-2002 |
jhb |
struct timecounter is defined in sys/time.h on 4-stable.
Sponsored by: The Weather Channel
|
105280 |
16-Oct-2002 |
jhb |
- Include lock headers on current in this header instead of putting #if's in all the other ACPI source files. - Use splhigh() for the ACPI subsystem lock on 4-stable.
Sponsored by: The Weather Channel
|
105279 |
16-Oct-2002 |
jhb |
- In AcpiOsGetThreadId(), allow for curproc to be NULL on 4-stable systems. In that case use proc0's pid to return the thread ID. - For 4-stable, use the generic swi taskqueue for ACPI events rather than implementing our own.
Sponsored by: The Weather Channel
|
105278 |
16-Oct-2002 |
jhb |
Implement the internal locks of an ACPI semaphore with splhigh() on 4-stable. -current uses a mutex for this purpose.
Sponsored by: The Weather Channel
|
105259 |
16-Oct-2002 |
iwasaki |
Fix a possible bug about freeing non-malloc'ed pointer.
Suggested by: jhb (in -current ML)
|
104727 |
09-Oct-2002 |
jhb |
Use d_thread_t for cdevsw functions instead of struct thread * so that it is easier to share this code with 4-stable.
|
104726 |
09-Oct-2002 |
jhb |
Include <dev/acpica/acpivar.h> instead of <acpica/acpivar.h> like all the other sys/dev/acpica files.
|
104677 |
08-Oct-2002 |
jhb |
Don't panic for a bad ivar request, just return ENOENT.
|
104496 |
05-Oct-2002 |
iwasaki |
Make sure that ACPI PCI driver probe routine call pci_cfgregopen() before start accessing PCI config space.
Reviewed by: jhb
|
104495 |
05-Oct-2002 |
iwasaki |
Oops, forgot to add main file for my previous commit :-)
|
104494 |
05-Oct-2002 |
iwasaki |
Add code for ACPI PCI link object manipulation. This allocate the best IRQ to boot-disable devices (have IRQ 0). Allocated IRQ will be used for PCI interrupt routing when ACPI is enabled.
Note that verbose messaging enabled for the time being so that people can easily notice the strange behavior if it happened.
|
104432 |
04-Oct-2002 |
peter |
Oops, missed this one. Fix a printf format error on 64 bit systems where sizes are long instead of int.
|
104431 |
04-Oct-2002 |
peter |
Fix printf format errors on 64 bit systems where sizes are long instead of just int.
|
104430 |
04-Oct-2002 |
peter |
Display the name of the acpi node that we do not find the pci interrupt routing table for.
|
104354 |
02-Oct-2002 |
scottl |
Some kernel threads try to do significant work, and the default KSTACK_PAGES doesn't give them enough stack to do much before blowing away the pcb. This adds MI and MD code to allow the allocation of an alternate kstack who's size can be speficied when calling kthread_create. Passing the value 0 prevents the alternate kstack from being created. Note that the ia64 MD code is missing for now, and PowerPC was only partially written due to the pmap.c being incomplete there. Though this patch does not modify anything to make use of the alternate kstack, acpi and usb are good candidates.
Reviewed by: jake, peter, jhb
|
103869 |
23-Sep-2002 |
jhb |
Now that we only probe host-PCI bridges once, we no longer have to check to see if we have been probed before by checking for a pciX bus device.
|
103022 |
06-Sep-2002 |
jhb |
Attach ACPI children a bit later in attach(), specifically after performing any machine dependent initialization. This allows the MD code to set the interrupt routing model so that PCI interrupts are routed correctly when using an APIC or SAPIC for example.
|
103015 |
06-Sep-2002 |
jhb |
Add a helper routine acpi_SetIntrModel() to call the _PIC method to set the interrupt model in use so that ACPI can properly route interrupts for machines using APIC's or SAPIC's.
|
102977 |
05-Sep-2002 |
jhb |
Make the printf messages when routing interrupts more consistent in the various PCI bridge drivers.
|
102919 |
04-Sep-2002 |
jhb |
- Make pci_load_vendor_data() static and do it during MOD_LOAD instead of when the first PCI bus attaches. - Create /dev/pci during MOD_LOAD as well. - Destroy /dev/pci during MOD_UNLOAD (not that you can kldunload pci, but might as well get the code right)
|
102918 |
04-Sep-2002 |
jhb |
Use resource_list_print_types() instead of duplicating the code.
|
102612 |
30-Aug-2002 |
iwasaki |
s/hint.acpi.0.disable/hint.acpi.0.disabled/
Fix device hints entry for disabling acpi(4). This also should fix the arbitration with apm(4) when both drivers are enabled.
Note that your /boot/device.hints needs to be updated if you want to stop auto-loading acpi.ko or disable acpi(4).
|
102553 |
29-Aug-2002 |
iwasaki |
Resolve conflicts arising from the ACPI CA 20020815 import.
|
102535 |
28-Aug-2002 |
iwasaki |
Change default value of hw.acpi.sleep_delay to 0. This caused problems (reset or lock up) at wakeup.
|
102470 |
27-Aug-2002 |
iwasaki |
Fix a bug about the cooling system controlling in acpi_thermal driver. Recent version of ACPI CA returns the package object which contains object reference elements if the elements are named objects. We need to be careful when you use acpi_ForeachPackageObject() in new code...
|
102447 |
26-Aug-2002 |
jhb |
Overhaul the ACPI PCI bridge driver a bit: - Add an ACPI PCI-PCI bridge driver (the previous driver just handled Host-PCI bridges) that is a PCI driver that is a subclass of the generic PCI-PCI bridge driver. It overrides probe, attach, read_ivar, and pci_route_interrupt. - The probe routine only succeeds if our parent is an ACPI PCI bus which we test for by seeing if we can read our ACPI_HANDLE as an ivar. - The attach routine saves a copy of our handle and calls the new acpi_pcib_attach_common() function described below. - The read_ivar routine handles normal PCI-PCI bridge ivars and adds an ivar to return the ACPI_HANDLE of the bus this bridge represents. - The route_interrupt routine fetches the _PRT (PCI Interrupt Routing Table) from the bridge device's softc and passes it off to acpi_pcib_route_interrupt() to route the interrupt. - Split the old ACPI Host-PCI bridge driver into two pieces. Part of the attach routine and most of the route_interrupt routine remain in acpi_pcib.c and are shared by both ACPI PCI bridge drivers. - The attach routine verifies the PCI bridge is present, reads in the _PRT for the bridge, and attaches the child PCI bus. - The route_interrupt routine uses the passed in _PRT to route a PCI interrupt. The rest of the driver is the ACPI Host-PCI bridge specific bits that live in acpi_pcib_acpi.c. - We no longer duplicate pcib_maxslots but use it directly. - The driver now uses the pcib devclass instead of its own devclass. This means that PCI busses are now only children of pcib devices. - Allow the ACPI_HANDLE for the child PCI bus to be read as an ivar of the child bus. - Fetch the _PRT for routing PCI interrupts directly from our softc instead of walking the devclass to find ourself and then fetch our own softc.
With this change and the new ACPI PCI bus driver, ACPI can now properly route interrupts for devices behind PCI-PCI bridges. That is, the Itanium2 with like 10 PCI busses can now boot ok and route all the PCI interrupts. Hopefully this will also fix problems people are having with CardBus bridges behind PCI-PCI bridges not properly routing interrupts when ACPI is used.
Tested on: i386, ia64
|
102445 |
26-Aug-2002 |
jhb |
Add an ACPI PCI bus driver that is a subclass of the generic PCI bus driver. This driver overrides the probe, attach, and read_ivar methods.
If the parent bridge is an ACPI PCI bridge, then the probe routine will match, otherwise it will fail. It tests this by seeing if it can get the ACPI_HANDLE ivar from the bridge device.
In the attach routine, it uses pci_add_children() to add all the child devices (but with a slightly larger ivar so it can store ACPI_HANDLE's for child devices) and then walks through the ACPI namespace below the bus device to cache ACPI_HANDLE's for all child devices present in the namespace. It does this by comparing the pci slot and function to the address encoded in _ADR of the devices in the ACPI namespace.
The read_ivar routine passes most requests off to pci_read_ivar() and adds a new request so that the ACPI_HANDLE for a child device can be read.
To add proper power support the power methods can be overridden as well, but that is not currently implemented. Also, there are cases where a device may show in the ACPI namespace as a PCI device that the PCI probe does not find. Currently such devices are ignored.
Tested on: i386, ia64
|
102439 |
26-Aug-2002 |
jhb |
In acpi_pcib_route_interrupt(), the code claims to check to see if a PCI LNK device (interrupt source provider sort of) is present before using it, but the code actually tested the status (_STA) of the PCI bridge device doing the routing, not the actual LNK device. Fix it to check the status of the LNK device.
|
102402 |
25-Aug-2002 |
iwasaki |
Add new sysctl MIB (hw.acpi.sleep_delay) to specify the delay (in seconds) before ACPI sleep. Some machines might need this to sleep by Hot-key.
|
102222 |
21-Aug-2002 |
jhb |
Use the _STA method of a battery control method to see if a battery is present or not. My laptop now properly notices when a battery is removed.
Reviewed by: iwasaki
|
101763 |
12-Aug-2002 |
imp |
don't include redunant \n in panic message
|
101560 |
09-Aug-2002 |
iwasaki |
Fix wrong member variable ordering of struct acpi_bif.
|
100969 |
30-Jul-2002 |
iwasaki |
Resolve conflicts arising from the ACPI CA 20020725 import.
|
100539 |
23-Jul-2002 |
iwasaki |
Add NULL check for the output buffer from AcpiEvaluateObject().
Submitted by: jon
|
100497 |
22-Jul-2002 |
iwasaki |
Add device(power/sleep button and lid) wake function from sleeping state. This is required for some Thinkpad (and maybe VAIO) machines to wake the system up from sleep.
Currently partially implemented, more complete implementation will come later.
|
99682 |
09-Jul-2002 |
iwasaki |
Resolve conflicts arising from the ACPI CA 20020611 import.
|
99492 |
06-Jul-2002 |
iwasaki |
Fix wrong use of ACPI_NO_UNIT_LIMIT which is for as_maxunits, not as_units.
|
99243 |
02-Jul-2002 |
takawata |
Make interrupt driven EC transaction optional.
|
99149 |
30-Jun-2002 |
iwasaki |
Resolve conflicts arising from the ACPI CA 20020404 import.
|
97274 |
25-May-2002 |
bde |
Fixed printf format errors which apparently crept in while -Wformat was disabled for gcc-3.
|
96947 |
19-May-2002 |
iwasaki |
Terminate ACPI subsystem on reboot. Some machines stuck on reboot if ACPI sleep/wakeup was executed.
|
96926 |
19-May-2002 |
peter |
Brutally deal with __func__ being 'const char *' on gcc-3.1.
|
96277 |
09-May-2002 |
jhb |
Fix acpi_avoid() to call freeenv() on the original char * returned from getenv().
Reported by: joe Tested by: joe
|
95814 |
30-Apr-2002 |
phk |
Don't export timecounter structures under debug. with sysctl, they contain no truly interesting data anymore.
|
95489 |
26-Apr-2002 |
phk |
Remove the tc_update() function. Any frequency change to the timecounter will be used starting at the next second, which is good enough for sysctl purposes. If better adjustment is needed the NTP PLL should be used.
|
95384 |
24-Apr-2002 |
mux |
Don't call freeenv() on a modified pointer.
Submitted by: Alexander Kabaev <ak03@gte.com> Reviewed by: phk Pointy hat to: mux
|
95081 |
19-Apr-2002 |
mike |
Fix compiling of acpica when debugging is enabled. In the previous revision, two getenv()s were accidentally changed to use testenv().
Pointy hat to: mux
|
94936 |
17-Apr-2002 |
mux |
Rework the kernel environment subsystem. We now convert the static environment needed at boot time to a dynamic subsystem when VM is up. The dynamic kernel environment is protected by an sx lock.
This adds some new functions to manipulate the kernel environment : freeenv(), setenv(), unsetenv() and testenv(). freeenv() has to be called after every getenv() when you have finished using the string. testenv() only tests if an environment variable is present, and doesn't require a freeenv() call. setenv() and unsetenv() are self explanatory.
The kenv(2) syscall exports these new functionalities to userland, mainly for kenv(1).
Reviewed by: peter
|
94168 |
08-Apr-2002 |
takawata |
Print DRQ resource in boot message.
|
93818 |
04-Apr-2002 |
jhb |
Change callers of mtx_init() to pass in an appropriate lock type name. In most cases NULL is passed, but in some cases such as network driver locks (which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.
Tested on: i386, alpha, sparc64
|
93093 |
24-Mar-2002 |
phk |
Hide the ACPI counter probing printf behind bootverbose.
The conclusion is that this method really can tell the perfect from the less than perfect ACPI counters.
It is in fact probably a bit more discriminative than that, but we will rather condemn some otherwise perfect counters to the slightly slower "-safe" version, than certify a counter as perfect which will let us down later.
Many thanks to all the people who sent email reports!
|
92849 |
21-Mar-2002 |
msmith |
Fix error introduced in the 20020217 update, where GetPossibleResources was spammed with GetCurrentResources.
Submitted by: Munehiro Matsuda <haro@h4.dion.ne.jp>
|
92739 |
20-Mar-2002 |
alfred |
Remove __P.
|
92666 |
19-Mar-2002 |
peter |
Fix a gcc-3.1+ warning. warning: deprecated use of label at end of compound statement
ie: you cannot do this anymore: switch(foo) { ....
default: }
|
92135 |
12-Mar-2002 |
dfr |
Only i386 has wbinvd().
|
92120 |
12-Mar-2002 |
peter |
Do not concatenate __func__ with strings, because it is not a string. Later gcc's blow up on this.
|
92119 |
12-Mar-2002 |
peter |
Do not do string concatenation with __func__ (which is not a string)
|
92118 |
12-Mar-2002 |
peter |
Recent acpica imports have changed the lengths from UINT32 to ACPI_SIZE, which is 64 bit on ia64. Fix it.
|
91640 |
04-Mar-2002 |
iwasaki |
Add generalized power profile code. This makes other power-management system (APM for now) to be able to generate power profile change events (ie. AC-line status changes), and other kernel components, not only the ACPI components, can be notified the events.
- move subroutines in acpi_powerprofile.c (removed) to kern/subr_power.c - call power_profile_set_state() also from APM driver when AC-line status changes - add call-back function for Crusoe LongRun controlling on power profile changes for a example
|
91237 |
25-Feb-2002 |
phk |
Add a new test_counter() function which tries to determine the width of the inter-value histogram for 2000 samples. If the width is 3 or less for 10 consequtive samples, we trust the counter to be good, otherwise we use the *_safe() method.
This method may be too strict, but the worst which can happen is that we take the performance hit of the *_safe() method when we should not.
Make the *_safe() method more discriminating by mandating that the three samples do not span more than 15 ticks on the counter.
Disable the PCI-ident based probing as a means to recognize good counters.
Inspiration from: dillon and msmith
|
91215 |
25-Feb-2002 |
msmith |
The thermal thread needs to take Giant before it does anything with the interpreter.
Submitted by: Magnus B{ckstr|m <b@etek.chalmers.se>
|
91204 |
24-Feb-2002 |
dillon |
Tests by numerous people have shown that many chipsets do not properly latch the acpi timer, resulting in weird deltas. The problem is severe enough to adversely effect the timecounter code.
Default to the 'safe' version of the get-timecount function. The probe will override it if a known-good chipset is found. This is temporary until a more complete solution is found.
Reviewed by: phk
|
91130 |
23-Feb-2002 |
msmith |
AcpiOsPrintf and AcpiOsVprintf now return void.
|
91129 |
23-Feb-2002 |
msmith |
AcpiOsCallocate is no longer required.
|
91128 |
23-Feb-2002 |
msmith |
Match namespace cleanup changes in ACPI CA 20020217 update.
|
91127 |
23-Feb-2002 |
msmith |
Add our own private defines for driver debug layers. Obsolete the acpi_GetInto* interfaces.
Fix a typo to be less appropriate.
|
91126 |
23-Feb-2002 |
msmith |
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently. The AcpiGetInto* interfaces are obsoleted by ACPI_ALLOCATE_BUFFER.
Convert to using a kthread rather than timeout() to avoid problems with the interpreter sleeping.
|
91125 |
23-Feb-2002 |
msmith |
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently. The AcpiGetInto* interfaces are obsoleted by ACPI_ALLOCATE_BUFFER.
|
91124 |
23-Feb-2002 |
msmith |
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently. The AcpiGetInto* interfaces are obsoleted by ACPI_ALLOCATE_BUFFER.
Use _ADR as well as _BBN to get our bus number.
|
91123 |
23-Feb-2002 |
msmith |
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently.
|
91122 |
23-Feb-2002 |
msmith |
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently.
The ACPI global lock acquire takes a timeout value. I'm not sure what we should do about timeouts on it; a deadlock against this lock is catastrophic.
|
91121 |
23-Feb-2002 |
msmith |
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently. The AcpiGetInto* interfaces are obsoleted by ACPI_ALLOCATE_BUFFER.
Kill off the timeouts that used to read _BIF and _BST. These are invoked when the battery is actually read. timeout() is dangerous in combination with ACPI, as the interpreter can block.
This driver still needs more work.
|
91120 |
23-Feb-2002 |
msmith |
Match namespace cleanup changes in ACPI CA 20020217 update. Use ACPI_SUCCESS/ACPI_FAILURE consistently. The AcpiGetInto* interfaces are obsoleted by ACPI_ALLOCATE_BUFFER.
Add AcpiBatteryIsPresent helper to determine whether a battery device is inserted.
Add ACPI_ALL_DRIVERS to the list of debug layers, now that we own the namespace for this.
Pr:
|
90014 |
31-Jan-2002 |
takawata |
Fix irq/drq handling. IRQ and DRQ resource information can be get in one object for one resource. Array of values in a object means possible values for the object.
|
90005 |
31-Jan-2002 |
takawata |
Fix error handling.
PR:30665 Submitted by:TOMITA Yoshinori <yoshint@flab.fujitsu.co.jp>
|
89088 |
08-Jan-2002 |
msmith |
find_devclass -> devclass_find.
|
89054 |
08-Jan-2002 |
msmith |
Staticise devclasses and some unnecessarily global variables.
|
88900 |
05-Jan-2002 |
jhb |
Change the preemption code for software interrupt thread schedules and mutex releases to not require flags for the cases when preemption is not allowed:
The purpose of the MTX_NOSWITCH and SWI_NOSWITCH flags is to prevent switching to a higher priority thread on mutex releease and swi schedule, respectively when that switch is not safe. Now that the critical section API maintains a per-thread nesting count, the kernel can easily check whether or not it should switch without relying on flags from the programmer. This fixes a few bugs in that all current callers of swi_sched() used SWI_NOSWITCH, when in fact, only the ones called from fast interrupt handlers and the swi_sched of softclock needed this flag. Note that to ensure that swi_sched()'s in clock and fast interrupt handlers do not switch, these handlers have to be explicitly wrapped in critical_enter/exit pairs. Presently, just wrapping the handlers is sufficient, but in the future with the fully preemptive kernel, the interrupt must be EOI'd before critical_exit() is called. (critical_exit() can switch due to a deferred preemption in a fully preemptive kernel.)
I've tested the changes to the interrupt code on i386 and alpha. I have not tested ia64, but the interrupt code is almost identical to the alpha code, so I expect it will work fine. PowerPC and ARM do not yet have interrupt code in the tree so they shouldn't be broken. Sparc64 is broken, but that's been ok'd by jake and tmm who will be fixing the interrupt code for sparc64 shortly.
Reviewed by: peter Tested on: i386, alpha
|
88808 |
02-Jan-2002 |
msmith |
If the CLK_VAL register is 0 bits wide, the system does not support CPU throttling, so don't do some bogus math to check it.
|
88470 |
25-Dec-2001 |
iwasaki |
Oops, wrong option name. It's should be ACPI_MAX_THREADS, not ACPI_NO_THREADS.
|
88420 |
22-Dec-2001 |
iwasaki |
Add OS layer ACPI mutex and threading support. - Temporary fix a bug of Intel ACPI CA core code. - Add OS layer ACPI mutex support. This can be disabled by specifying option ACPI_NO_SEMAPHORES. - Add ACPI threading support. Now that we have a dedicate taskqueue for ACPI tasks and more ACPI task threads can be created by specifying option ACPI_MAX_THREADS. - Change acpi_EvaluateIntoBuffer() behavior slightly to reuse given caller's buffer unless AE_BUFFER_OVERFLOW occurs. Also CM battery's evaluations were changed to use acpi_EvaluateIntoBuffer(). - Add new utility function acpi_ConvertBufferToInteger(). - Add simple locking for CM battery and temperature updating. - Fix a minor problem on EC locking. - Make the thermal zone polling rate to be changeable. - Change minor things on AcpiOsSignal(); in ACPI_SIGNAL_FATAL case, entering Debugger is easier to investigate the problem rather than panic.
|
87566 |
09-Dec-2001 |
iwasaki |
Disable sleep requests for 5 sec after wakeup. This is needed for some Toshiba and Thinkpad laptops. Wakeup event is generated by power button or sleep button on some laptops but this also generates SCI interrupt, and shutdown the system as result. So this is introduced so that acpi driver ignore given requests for certain period.
|
87134 |
30-Nov-2001 |
iwasaki |
Add a couple of minor changes. - set sc->acpi_s4bios to 1 by default for hibernation until OS-initiated S4 transition is implemented. - change the behavior of acpi_sleep_state_sysctl() if new value is the same as old one, do nothing instead of EINVAL.
|
87055 |
28-Nov-2001 |
iwasaki |
Yet another synch with minor changes in the ACPI CA 20011120 snapshot. We need to call AcpiEnterSleepStatePrep() before AcpiEnterSleepState().
|
87036 |
28-Nov-2001 |
msmith |
Synch with minor changes in the ACPI CA 20011120 snapshot.
|
86802 |
23-Nov-2001 |
iwasaki |
Validate requested sleep state in acpi_SetSleepState() to avoid reentry during wakeup procedure.
|
86786 |
22-Nov-2001 |
iwasaki |
Add disabling code via the debug.acpi.disable environment variable.
|
86552 |
18-Nov-2001 |
iwasaki |
Cleanups of verbose printing. All the messages for the debugging is disabled unless verbose flag is set. Also fix some messages in terms of English. The critical messages and error messages in probe/attach routine are unchanged by this commit.
|
86401 |
15-Nov-2001 |
iwasaki |
Fix re-enabling ACPI on wakeup from hibernation. The problem was that acpi_Disable() cleared all GPE events. Some old ACPI implementaions still need current re-enabling code.
|
86399 |
15-Nov-2001 |
iwasaki |
Two minor changes. - Change _ACx sysctl oid from ten of _AC[0-9] to one _ACx. - Better error printing on _TMP evaluation.
Reviewed by: msmith
|
86398 |
15-Nov-2001 |
iwasaki |
Remove "S4B" from sleep_state_names and add "NONE" instead. Now you can say; # sysctl hw.acpi.lid_switch_state=NONE instead of specifying unsupported _Sx object in the system.
Actually, S4B is going to disappear in ACPICA and we already have hw.acpi.s4bios to distinguish BIOS hibernation or OS hibernation.
|
86133 |
06-Nov-2001 |
iwasaki |
Add S4BIOS sleep (BIOS hibernation) and DSDT overriding support. - Add S4BIOS sleep implementation. This will works well if MIB hw.acpi.s4bios is set (and of course BIOS supports it and hibernation is enabled correctly). - Add DSDT overriding support which is submitted by takawata originally. If loader tunable acpi_dsdt_load="YES" and DSDT file is set to acpi_dsdt_name (default DSDT file name is /boot/acpi_dsdt.aml), ACPI CA core loads DSDT from given file rather than BIOS memory block. DSDT file can be generated by iasl in ports/devel/acpicatools/. - Add new files so that we can add our proposed additional code to Intel ACPI CA into these files temporary. They will be removed when similar code is added into ACPI CA officially.
|
86083 |
05-Nov-2001 |
iwasaki |
Remove unnecessary WAK_STS bit waiting code for S1 sleep. It was duplicated with AcpiEnterSleepState() since acpica-unix-20010816.
|
85846 |
01-Nov-2001 |
iwasaki |
Oops, deleted wrong BIF acquisition timeout invocation by mistake in my previous commit. acpi_cmbat_get_bif() from taskqueue calls acpi_cmbat_timeout() so it's better for startup.
|
85835 |
01-Nov-2001 |
iwasaki |
Some fix for the recent apm module changes. - Now that apm loadable module can inform its existence to other kernel components (e.g. i386/isa/clock.c:startrtclock()'s TCS hack). - Exchange priority of SI_SUB_CPU and SI_SUB_KLD for above purpose. - Add simple arbitration mechanism for APM vs. ACPI. This prevents the kernel enables both of them. - Remove obsolete `#ifdef DEV_APM' related code. - Add abstracted interface for Powermanagement operations. Public apm(4) functions, such as apm_suspend(), should be replaced new interfaces. Currently only power_pm_suspend (successor of apm_suspend) is implemented.
Reviewed by: peter, arch@ and audit@
|
85738 |
30-Oct-2001 |
iwasaki |
Style(9) fix, mainly white spaces.
|
85729 |
30-Oct-2001 |
iwasaki |
Some improvements of control method battery driver. - Add a new MIB for battery info expire time in order to make it changeable. Battery info expire time can be specified by hw.acpi.battery.info_expire in sec. - Add own MALLOC type and fix some potential memory leakages. - Change some frequent printings to verbose printing. - Stop timeout during acpi_cmbat_get_bst() too. This should reduce the races with BIF evaluation. - Remove acpi_cmbat_get_bif() invocation from acpi_cmbat_attach(). This was redundant because this should be called from acpi_cmbat_timeout() now.
|
85699 |
29-Oct-2001 |
iwasaki |
Some small improvements of ACPI thermal driver. - Give a guaranteed minimum cooling run time to avoid too frequent cooling system On/Off switching. The minimum cooling run time can be specified by hw.acpi.thermal.min_runtime in sec. - Refine message printing (_AC-1 -> NONE). - Add verbose mode enable/disable capability by hw.acpi.verbose in bool.
Reviewed by: acpi-jp@ folks
|
85560 |
26-Oct-2001 |
jhb |
- Change the taskqueue locking to protect the necessary parts of a task while it is on a queue with the queue lock and remove the per-task locks. - Remove TASK_DESTROY now that it is no longer needed. - Go back to inlining TASK_INIT now that it is short again.
Inspired by: dfr
|
85556 |
26-Oct-2001 |
iwasaki |
Add APM compatibility feature to ACPI. This emulates APM device node interface APIs (mainly ioctl) and provides APM services for the applications. The goal is to support most of APM applications without any changes. Implemented ioctls in this commit are: - APMIO_SUSPEND (mapped ACPI S3 as default but changable by sysctl) - APMIO_STANDBY (mapped ACPI S1 as default but changable by sysctl) - APMIO_GETINFO and APMIO_GETINFO_OLD - APMIO_GETPWSTATUS
With above, many APM applications which get batteries, ac-line info. and transition the system into suspend/standby mode (such as wmapm, xbatt) should work with ACPI enabled kernel (if ACPI works well :-)
Reviewed by: arch@, audit@ and some guys
|
85521 |
26-Oct-2001 |
jhb |
Add locking to taskqueues. There is one mutex per task, one mutex per queue, and a mutex to protect the global list of taskqueues. The only visible change is that a TASK_DESTROY() macro has been added to mirror the TASK_INIT() macro to destroy a task before it is free'd.
Submitted by: Andrew Reiter <awr@watson.org>
|
85503 |
25-Oct-2001 |
jhb |
Use TASK_INIT to initialize taskqueue task instead of violating the abstraction.
Submitted by: Andrew Reiter <arr@watson.org>
|
85387 |
23-Oct-2001 |
jhb |
Allow hw.acpi.cpu.{economy,performance}_speed to be set from the loader via tunables.
|
85325 |
22-Oct-2001 |
iwasaki |
Reduce frequency of Battery info (_BIF) acquisition. This helps avoiding EC read errors on some laptops. - Stop updating Battery info for all user requests - Update Battery info by notify events and resume method - Poll Battery info every one minute
Suggested by: takawata
|
84811 |
11-Oct-2001 |
jhb |
Add missing includes of sys/lock.h.
|
84630 |
07-Oct-2001 |
dfr |
Make the interrupt routing a bit less chatty unless bootverbose is set.
|
84575 |
06-Oct-2001 |
peter |
Fix some 64-bit uncleanliness.
|
84574 |
06-Oct-2001 |
peter |
Fix some style bugs before fixing some real bugs.
|
84573 |
06-Oct-2001 |
peter |
Fix a stack trashing bug when int != sizeof(pointer) This fixes the ia64 boot! We have scsi disks!
|
84500 |
04-Oct-2001 |
msmith |
Update usage of AcpiEnableEvent to reflect a new argument.
Fix acpi_DeviceIsPresent to check for valid _STA data and to check the "present" and "functioning" bits.
Use acpi_DeviceIsPresent in acpi_pcib rather than rolling our own (also broken) version.
|
84446 |
04-Oct-2001 |
dfr |
Add busspace hacks for ia64.
|
84445 |
04-Oct-2001 |
dfr |
Use return_PTR, not return_VALUE when returning pointers.
|
84444 |
04-Oct-2001 |
dfr |
Check the compatible ID as well as the hardware ID in acpi_MatchHid.
|
83581 |
17-Sep-2001 |
iwasaki |
Call acpi_DeviceIsPresent() only for devices. This should make non-ACPI_TYPE_DEVICE devices (such as acpi_tz and acpi_cpu) enabled again.
Reviewed by: msmith
|
83491 |
15-Sep-2001 |
msmith |
Disable devices that are not present; at a later stage we can then enable them if the device arrives.
This should solve the problem where devices that have been disabled eg. in the BIOS show up with nonsense resources and hang the bootstrap process.
|
83366 |
12-Sep-2001 |
julian |
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
|
83218 |
08-Sep-2001 |
iwasaki |
Don't call tsleep from AcpiOsStall(), call DELAY() always instead. Process switching during calling AcpiOsStall() caused fatal trap 12 at sleeping/wakeup on some machines.
|
83183 |
07-Sep-2001 |
msmith |
Should check debug.acpi.avoid, not .disable.
|
83180 |
07-Sep-2001 |
msmith |
Allow the ACPI subsystem to be disabled with a hint.
Avoid fully initialising the ACPI namespace if we are attempting to avoid parts of it. This is a workaround for some systems that still crash the interpreter.
Implement the ISA_IVAR_LOGICALID for ISA compatibility. Implement stubs for other PnP ID-related ivars.
|
83179 |
07-Sep-2001 |
msmith |
Move OsdEnvironment.c into MD code; searching for the ACPI tables is not portable.
|
83173 |
06-Sep-2001 |
msmith |
Initialise the adapter status to an invalid state, so that the initial check of the adapter object will always result in a change event.
This fixes the problem where a laptop booted without an AC adapter ran at 100% CPU speed by default.
Submitted by: "Christopher N . Harrell" <cnh@netvmg.com>
|
83169 |
06-Sep-2001 |
jhb |
Add a hack to acpi_EvaluateInteger() to handle the case of a method returning a Buffer that contains an Integer rather an an Integer directly.
Submitted by: msmith Approved by: msmith
|
83164 |
06-Sep-2001 |
msmith |
Allocate system resource IRQs as shareable; this is the typical case.
|
82967 |
04-Sep-2001 |
iwasaki |
Just print a message in acpi_tz_monitor() only when new active state is different from the previous active state. This reduce tons of 'acpi_tz0: _AC0: temperature 64.0 >= setpoint 64.0' messages.
Reviewed by: msmith
|
82779 |
02-Sep-2001 |
iwasaki |
Fix typo; CTLFLAG_RO -> CTLFLAG_RD.
|
82765 |
01-Sep-2001 |
msmith |
Add a MODULE_VERSION declaration. This should prevent duplicate loading of the module, and allows other modules to depend on and link against the ACPI module.
Add a sysctl that allows us to retrieve the ACPI CA version number as well.
|
82704 |
31-Aug-2001 |
msmith |
Don't claim memory resources owned by a PNP0C01 device ("system memory") as some systems claim the entire physical address space is owned by it.
|
82667 |
31-Aug-2001 |
msmith |
Don't activate placeholder resources; it can be very expensive in the SYS_RES_MEMORY case, and it shouldn't be necessary.
|
82630 |
31-Aug-2001 |
takawata |
Call OS-independent resume routine to execute _WAK .. etc. This should also recover GPE bit,comment says, though not implemented yet.
|
82537 |
30-Aug-2001 |
msmith |
Add support for attaching PnP-aware ISA drivers to ACPI.
Always parse ACPI device resource settings (current resources only) and attach the resources to the device before probe/attaching.
|
82536 |
30-Aug-2001 |
msmith |
Retarget the resource parser slightly. We only fetch current resources for the device now (we should really just be parsing a passed-in resource buffer).
Wrap long lines so this is (more) readable.
Support Address16 and Address32 resources, in the CONSUMER case.
Support DRQs so that we can handle ISA devices.
Support ExtendedIrqs (we ignore most of their attributes)
Add a placeholder device for system memory and system resources. This takes the place of the nexus placeholder, which only attaches to ISA.
|
82535 |
30-Aug-2001 |
msmith |
Note that now that some ISA devices will attach to ACPI, we need to keep the ivar indexes that ISA uses free.
|
82534 |
30-Aug-2001 |
msmith |
Don't parse our resources ourself, the ACPI core code must do it.
|
82533 |
30-Aug-2001 |
msmith |
Nuke the (fairly bogus) attachment of *all* ACPI devices to ISA.
|
82532 |
30-Aug-2001 |
msmith |
Add missing acpi_disabled() call so that this driver can be disabled.
|
82372 |
26-Aug-2001 |
msmith |
Updates to match the ACPI CA 20010816 import:
- New debug macro (ACPI_DEBUG_PRINT), reducing debug-case code size. - New debug level/subsystem codes.
|
82084 |
21-Aug-2001 |
iwasaki |
Fix error checking about device state transition from D0 to D3. Turn off the resources listed in _PR0 to go to D3 if we don't have _PR3/_PS3.
Reviewed by: msmith
|
82043 |
21-Aug-2001 |
msmith |
Remove noisy printfs from the notify handler; having these go off every couple of seconds is not useful.
|
81172 |
05-Aug-2001 |
msmith |
The Intel 440MX ACPI timer seems to work properly, so add it to the list here. Restructure slightly so that adding more devices is easier.
Submitted by: Jose Gabriel J Marcelino <gabriel@maquina.com>
|
81096 |
03-Aug-2001 |
msmith |
Reverse the logic here again with regards to "trusted" ACPI timer implementations. More of them seem to be broken, so only "trust" timers we know work.
|
81093 |
03-Aug-2001 |
msmith |
Shoud build resources in the _CRS buffer. Oops.
Submitted by: "neckpain@nettaxi.com" <neckpain@nettaxi.com>
|
81092 |
03-Aug-2001 |
msmith |
Move the resource pointer when we reallocate the buffer.
Submitted by: "neckpain@nettaxi.com" <neckpain@nettaxi.com>
|
80605 |
30-Jul-2001 |
msmith |
The current resource buffer returned from an interrupt link device in the case where there are no interrupts routed for it does not contain enough space to use it to route an interrupt. In the case where we need to route an interrupt, throw away the returned buffer and create a new one containing the interrupt we want.
|
80604 |
30-Jul-2001 |
msmith |
- Prevent the ACPI code from being loaded as a module other than at boot time. Loading as a module once the system is up and running doesn't make any sense.
- Fix acpi_FindIndexedResource (it would only check the first resource), changes the calling interface.
- Add a new helper function (acpi_AppendBufferResource) to help building buffers containing resources.
|
80602 |
30-Jul-2001 |
msmith |
Minor updates (no functional changes)
- Remove the beer-ware license (reqested by phk) - Reorganise so that the PIIX4 workaround code is kept together, and switch the workaround function via the timecounter struct, saving a compare in the read-timecounter codepath. Also indicate that the workaround is active by changing the timecounter hardware string.
|
80442 |
27-Jul-2001 |
msmith |
The ACPI timer register corruption problem is resolved in the PIIX4 starting with the PIIX4M. Restrict enabling the workaround to those chips known to be buggy.
|
80335 |
25-Jul-2001 |
iwasaki |
Better checking of duplicated interrupt handler installation.
Reviewed by: msmith
|
80334 |
25-Jul-2001 |
iwasaki |
Some minor fixes. - Set system power profile only when AC-line status has canged. - Get initial AC-line status after whole system is up.
Reviewed by: msmith
|
80160 |
22-Jul-2001 |
iwasaki |
Don't do sleep state transition if specified sleep state is not supported by the system.
|
80078 |
21-Jul-2001 |
msmith |
Convert from acpi_strerror() to AcpiFormatException()
Fix dangling include of the dear departed acpi_ecreg.h
|
80071 |
21-Jul-2001 |
msmith |
Update the OSD module to match the ACPI CA 20010717 import.
Submitted by: "Grover, Andrew" <andrew.grover@intel.com> (OsdHardware.c)
|
80070 |
21-Jul-2001 |
msmith |
Implement a "proper" timecounter hung off the ACPI timer device.
This code is based on the mp_clock code by phk. It attempts to detect the PIIX4 (see comments for details) and use a workaround for its problems.
This code is experimental, and could use some testing and review by a timekeeping enthusiast.
|
80069 |
21-Jul-2001 |
msmith |
Merge the EC register definitions into the EC module proper, they're not used anywhere else.
AcpiOsSleepUsec() -> AcpiOsStall()
|
80068 |
21-Jul-2001 |
msmith |
Use our saved copy of the FADT rather than fetching it again.
|
80067 |
21-Jul-2001 |
msmith |
Don't call ourselves a "control method" anything, that's not useful.
Move the "button pressed" diagnostics to the point where we can print out which button was actually pressed.
|
80066 |
21-Jul-2001 |
msmith |
The API for loading tables changed (we no longer explicitly search for the RSDP, it's now found via a callback).
AcpiOsSleepUsec() went away, use AcpiOsSleep() instead (we could use AcpiOsStall() too)
AcpiFormatException() was changed to make more sense (it behaves like our old acpi_strerror() did), so throw acpi_strerror() away (still #defined in acpivar.h though, we need to sweep these seperately).
|
80034 |
20-Jul-2001 |
msmith |
We haven't used this for ages, and we're not going to either.
|
80028 |
20-Jul-2001 |
takawata |
Add ACPI S2-S4BIOS Suspend/Resume code. Some problems may remain.
Reviewed by:iwasaki
|
79493 |
09-Jul-2001 |
msmith |
Whoops; we get an ACPI_OBJECT back from evaluating a method, not an ACPI_OPERAND_OBJECT. Fix this so that the power resource type can be properly checked, and we can get the system level and resource order.
|
79409 |
07-Jul-2001 |
msmith |
Nuke the ACPI APIC driver. The ACPI CA infrastructure it depended on is gone, and it's not coming back, and the whole driver needed to be rethrought to deal with a major chicken-and-egg consideration.
|
79401 |
07-Jul-2001 |
iwasaki |
Fix typo in acpi_cpu_attach() and correct range checking in acpi_cpu_speed_sysctl().
|
79388 |
07-Jul-2001 |
msmith |
Kill the old processor driver; the ACPI CA functions it depended on are not coming back any time soon. Implement a new 'acpi_cpu' driver with support for CPU throttling and power policies.
|
79387 |
07-Jul-2001 |
msmith |
Add acpi_GetTableIntoBuffer, to aid in fetching tables.
|
79386 |
07-Jul-2001 |
msmith |
Get the ACPI softc before we potentially dereference it.
|
79385 |
07-Jul-2001 |
msmith |
Quiet the complaint about the _SCP method if it doesn't exist; it's not mandatory.
|
79384 |
07-Jul-2001 |
msmith |
Oops, have to use AcpiSetCurrentResources, not invoke the _SRS method directly.
|
79375 |
07-Jul-2001 |
msmith |
Add support for user-requested override of cooling levels.
Monitor the system power profile, and use _SCP to adjust thermal zones accordingly.
Simplify the behaviour of the timeout routine, and add some temporary debugging.
|
79374 |
07-Jul-2001 |
msmith |
Add support for system power profiles; select "performance" when AC power is available and "economy" when it is not.
|
79372 |
07-Jul-2001 |
msmith |
Support for system "power profiles". Currently we support two profiles; "economy" and "performance".
|
79357 |
06-Jul-2001 |
msmith |
This was only half-implemented when I committed it, and certainly didn't work. Now it's implemented and seems to work.
|
79285 |
05-Jul-2001 |
msmith |
Improve some error messages slightly.
|
79284 |
05-Jul-2001 |
msmith |
Implement PCI interrupt routing using the ACPI data attached to the PCI bus object. This should deal both with already-routed interrupts as well as devices that need an interrupt routed.
Note that it *doesn't* deal with interlocked interrupt dependancies, nor does it select between interrupt options in a smart way. These are optimisations that need further work.
|
79283 |
05-Jul-2001 |
msmith |
Fix a couple of misunderstandings in the monitor code. Passive cooling is a parallel adjunct to active cooling, not a lesser evil. The _ACx levels sort from 0 being hottest, not coolest.
Sanity check the returned temperature values, since we are having trouble reading them on some systems.
Rearrange sysctl nodes a bit; this is probably close to the final layout.
|
79282 |
05-Jul-2001 |
msmith |
Add a new helper function for finding resources in resource buffers.
Move the ACPI generic battery code into a new file.
|
79000 |
29-Jun-2001 |
msmith |
Wrap the interrupt handler so that we can get the ACPI lock.
|
78999 |
29-Jun-2001 |
msmith |
Add ACPI lock support.
Pass the softc, not the device_t to the Notify handler.
Don't invoke the Interpreter from callout context, as it may sleep. Use AcpiOsQueueForExecution, which is called from taskqueue_swi.
|
78994 |
29-Jun-2001 |
msmith |
Add ACPI subsystem mutex support, currently disabled. This implements a private mutex we can use to wrap the ACPI subsystem proper.
|
78993 |
29-Jun-2001 |
msmith |
Update for new debug layer constant names in the ACPI CA 20010615 import.
|
78992 |
29-Jun-2001 |
msmith |
Use msleep() when we sleep waiting for a GPE, since we are holding the ACPI mutex.
Add some comments to EcWaitEventIntr.
Clean up deviant style, add debugging to be consistent.
|
78991 |
29-Jun-2001 |
msmith |
Update to synch with the 20010615 ACPI CA import.
Add an ACPI subsystem mutex, and macros for handling it. Because it's not possible to differentiate between ACPI CA acquiring mutexes for internal use and for use by AML, and because AML in the field doesn't handle mutexes correctly, we can't use the ACPI subsystem's internal locking. In addition, we have other private data of our own to lock.
Add initial locking to the ACPI driver code and the thermal module. These locks are currently inoperative.
Pull some errant style back into line.
|
78915 |
28-Jun-2001 |
msmith |
Sync to my work in progress:
- Reorder the acpi_* functions in a sensible fashion - Add acpi_ForeachPackageObject and acpi_GetHandleInScope - Use the new debugging layer/level names - Implement most of the guts of the acpi_thermal module; passive cooling isn't there yet, but active cooling should work. - Implement power resource handling (acpi_powerres.c)
This compiles and mostly works, but my test coverage is small, so feedback is welcome.
|
78690 |
24-Jun-2001 |
iwasaki |
Reset timestamps of battery info. and status by thier notify handler.
Suggested by: takawata
|
78689 |
24-Jun-2001 |
iwasaki |
- Swap order of "S4B" and "S5" in sleep_state_names. They already changed in ACPICA actypes.h. - Use ACPI_S_STATES_MAX instead of ACPI_STATE_S5.
|
78662 |
23-Jun-2001 |
iwasaki |
Add sysctl interface (Read-only) for temprature, AC-line and Battery. Patches for acpi_cmbat.c submitted by Munehiro Matsuda.
|
77466 |
30-May-2001 |
msmith |
What I get for "fixing" at the last minute. Correct a mis-merge of takawata's timeout fix and put proc.h into the right file.
Submitted by: nnd@mail.nsk.ru
|
77432 |
29-May-2001 |
msmith |
- Updates for new constant naming in the ACPI CA 20010518 update. - Use __func__ instead of __FUNCTION. - Support power-off to S3 or S5 (takawata) - Enable ACPI debugging earlier (with a sysinit) - Fix a deadlock in the EC code (takawata) - Improve arithmetic and reduce the risk of spurious wakeup in AcpiOsSleep. - Add AcpiOsGetThreadId. - Simplify mutex code (still disabled).
|
76166 |
01-May-2001 |
markm |
Undo part of the tangle of having sys/lock.h and sys/mutex.h included in other "system" header files.
Also help the deprecation of lockmgr.h by making it a sub-include of sys/lock.h and removing sys/lockmgr.h form kernel .c files.
Sort sys/*.h includes where possible in affected files.
OK'ed by: bde (with reservations)
|
75100 |
02-Apr-2001 |
jhb |
Remove bogus block device major now that bdev majors are gone.
|
74914 |
28-Mar-2001 |
jhb |
Catch up to header include changes: - <sys/mutex.h> now requires <sys/systm.h> - <sys/mutex.h> and <sys/sx.h> now require <sys/lock.h>
|
73962 |
07-Mar-2001 |
iwasaki |
Bring our local hack for wakeup back from sys/contrib/dev/acpica/Subsystem/Hardware/Attic/hwxface.c to the proper location after AcpiEnterSleepState().
- Wait for the WAK_STS bit - Evaluate the _WAK method and check result code
|
73108 |
26-Feb-2001 |
jhb |
Properly protect the parameters to the EC_{GET,SET}_{DATA,CSR} macros with parens.
|
73107 |
26-Feb-2001 |
jhb |
- Use a loop to read consecutive bytes from the embedded controller to handle read and write requests for widths of multiple bytes. This can be used to read 16-bit battery status registers for example. - Remove some unused variables and #if 0'd debugging cruft. - Don't complain about a GPE query that fails due to AE_NOT_FOUND if the query method was _Q00.
|
73106 |
26-Feb-2001 |
jhb |
When ensuring the destination buffer is truncated for a string obtained from a BIF, use the size of the destinatino buffer, not the length of the string to determine where to put the nul char. As a side effect, the old code would truncate the string by one character while it was possibly overflowing the buffer.
|
72376 |
12-Feb-2001 |
jake |
Implement a unified run queue and adjust priority levels accordingly.
- All processes go into the same array of queues, with different scheduling classes using different portions of the array. This allows user processes to have their priorities propogated up into interrupt thread range if need be. - I chose 64 run queues as an arbitrary number that is greater than 32. We used to have 4 separate arrays of 32 queues each, so this may not be optimal. The new run queue code was written with this in mind; changing the number of run queues only requires changing constants in runq.h and adjusting the priority levels. - The new run queue code takes the run queue as a parameter. This is intended to be used to create per-cpu run queues. Implement wrappers for compatibility with the old interface which pass in the global run queue structure. - Group the priority level, user priority, native priority (before propogation) and the scheduling class into a struct priority. - Change any hard coded priority levels that I found to use symbolic constants (TTIPRI and TTOPRI). - Remove the curpriority global variable and use that of curproc. This was used to detect when a process' priority had lowered and it should yield. We now effectively yield on every interrupt. - Activate propogate_priority(). It should now have the desired effect without needing to also propogate the scheduling class. - Temporarily comment out the call to vm_page_zero_idle() in the idle loop. It interfered with propogate_priority() because the idle process needed to do a non-blocking acquire of Giant and then other processes would try to propogate their priority onto it. The idle process should not do anything except idle. vm_page_zero_idle() will return in the form of an idle priority kernel thread which is woken up at apprioriate times by the vm system. - Update struct kinfo_proc to the new priority interface. Deliberately change its size by adjusting the spare fields. It remained the same size, but the layout has changed, so userland processes that use it would parse the data incorrectly. The size constraint should really be changed to an arbitrary version number. Also add a debug.sizeof sysctl node for struct kinfo_proc.
|
72200 |
09-Feb-2001 |
bmilekic |
Change and clean the mutex lock interface.
mtx_enter(lock, type) becomes:
mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized)
similarily, for releasing a lock, we now have:
mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument.
The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind.
Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two:
MTX_QUIET and MTX_NOSWITCH
The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers:
mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively.
Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case.
Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled.
Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those.
Finally, caught up to the interface changes in all sys code.
Contributors: jake, jhb, jasone (in no particular order)
|
71876 |
31-Jan-2001 |
msmith |
Add some debugging.
Turn off semaphores. Nobody else implements them, and there is lots of AML out there which does totally absurd things with them, meaning that if we try to do the right thing we are guaranteed to fail.
|
71875 |
31-Jan-2001 |
msmith |
Add some debugging statements.
|
71874 |
31-Jan-2001 |
msmith |
Tidy up.
Don't print temperatures at attach time - they're usually wrong.
Use acpi_EvaluateInteger instead of doing things the hard way.
|
71873 |
31-Jan-2001 |
msmith |
Add some debugging.
Use acpi_EvaluateInteger where possible.
Use FuncName rather than &FuncName when passing function addresses.
Don't evaluate the _REG method when we attach to an address space - AcpiInstallAddressSpaceHandler does it for us.
|
71872 |
31-Jan-2001 |
msmith |
ACPI_NUMBER becomes ACPI_INTEGER. acpi_EvaluateNumber becomes acpi_EvaluateInteger.
Use acpi_EvaluateInteger instead of doing things the hard way where possible.
AcpiSetSystemSleepState (unofficial) becomes AcpiEnterSleepState.
Use the AcpiGbl_FADT pointer rather than searching for the FADT.
|
71462 |
23-Jan-2001 |
jhb |
Axe unused local variable.
|
71461 |
23-Jan-2001 |
jhb |
- Mark an unused function with __unused. - Temporarily #if 0 some unused local variables.
|
71460 |
23-Jan-2001 |
jhb |
Axe an unused static softc.
|
71459 |
23-Jan-2001 |
jhb |
Move a temporary #ifdef of code (just the #ifdef part) up so that it is above the local variable declaration to quiet warnings about unused variables.
|
71418 |
23-Jan-2001 |
peter |
In answer to the comment: /* XXX is it OK to block here? */, the answer is definately NO! as we are in interrupt context and malloc() does a KASSERT() to be sure.
|
71359 |
22-Jan-2001 |
msmith |
Plug a memory leak in AcpiOsDeleteSemaphore where the mutex is not properly destroyed.
Submitted by: bmilekic
|
71001 |
13-Jan-2001 |
jhb |
Add 3 new dynamic sysctl's to control the sleep states switched to on a power button, sleep button, or lid close event. The sysctl's use the ACPI sleep state names S0, S1, S2, S3, S4, S4B, and S5.
Reviewed by: iwasaki
|
70897 |
10-Jan-2001 |
iwasaki |
Enable fixed event at not only boot but also wakeup.
Reported and patch tested by: Peter Dufault <dufault@hda.hda.com>
|
70591 |
02-Jan-2001 |
takawata |
Change Embedded Controller lock to ACPI Global Lock.This is needed for mutual execution between BIOS and OS.
|
70468 |
29-Dec-2000 |
msmith |
Hack in interrupt routing support (using the core $PIR support, not using ACPICA properly). This makes it possible to use ACPICA in conjunction with CardBus before I get around to implementing ACPI/PCI interrupt routing.
|
70340 |
24-Dec-2000 |
iwasaki |
Add ioctls to acpi_cmbat and acpi_acad. These use mike's acpi_register_ioctl(). Fix wrong AML method calling in acpi_cmbat.
|
70271 |
22-Dec-2000 |
takawata |
Add ACPI AC adaptor and ACPI Control Method Battery. And install notify handler for thermal zone .
|
70247 |
21-Dec-2000 |
takawata |
Re-Enable OSD_PRIORITY_GPE. Now 20001215 has been commited.
|
70237 |
20-Dec-2000 |
iwasaki |
Disable my previous committed code for a moment.
Note to myself: this needs to be enabled again when newer version of ACPI is imported.
|
70236 |
20-Dec-2000 |
iwasaki |
Add task priority definition for OSD_PRIORITY_GPE in AcpiOsQueueForExecution(). This is needed to next ACPICA import.
|
70232 |
20-Dec-2000 |
takawata |
Change priority of procedure queueing. This is needed to next ACPICA import.
|
70194 |
19-Dec-2000 |
iwasaki |
Fix testing reboot howto flags in acpi_shutdown_final(). This sould make the system power-off correctly where the howto had more bits set than RB_POWEROFF, e.g. RB_NOSYNC.
Submitted by: Peter Pentchev <roam@orbitel.bg>
|
70048 |
15-Dec-2000 |
takawata |
Fix with debugging option.
Submitted by: haro@tk.kubota.co.jp
|
70018 |
14-Dec-2000 |
takawata |
Make Embedded Controller driver interrupt driven.
|
69910 |
12-Dec-2000 |
iwasaki |
Catch up with the recent conversion the per-eventhandler list mutex to a lockmgr lock.
|
69776 |
08-Dec-2000 |
msmith |
Staticise some malloc pools
Submitted by: phk
|
69744 |
08-Dec-2000 |
msmith |
- Convert a lot of homebrew debugging output to use the ACPI CA debugging infrastructure. It's not perfect, but it's a lot better than what we've been using so far. The following rules apply to this: o BSD component names should be capitalised o Layer names should be taken from the non-CA set for now. We may elect to add some new BSD-specific layers later.
- Make it possible to turn off selective debugging flags or layers by listing them in debug.acpi.layer or debug.acpi.level prefixed with !.
- Fully implement support for avoiding nodes in the ACPI namespace. Nodes may be listed in the debug.acpi.avoid environment variable; these nodes and all their children will be ignored (although still scanned over) by ACPI functions which scan the namespace. Multiple nodes can be specified, separated by whitespace.
- Implement support for selectively disabling ACPI subsystem components via the debug.acpi.disable environment variable. The following components can be disabled: o bus creation/scanning of the ACPI 'bus' o children attachment of children to the ACPI 'bus' o button the acpi_button control-method button driver o ec the acpi_ec embedded-controller driver o isa acpi replacement of PnP BIOS for ISA device discovery o lid the control-method lid switch driver o pci pci root-bus discovery o processor CPU power/speed management o thermal system temperature detection and control o timer ACPI timecounter Multiple components may be disabled by specifying their name(s) separated by whitespace.
- Add support for ioctl registration. ACPI subsystem components may register ioctl handlers with the /dev/acpi generic ioctl handler, allowing us to avoid the need for a multitude of /dev/acpi* control devices, etc.
|
69585 |
05-Dec-2000 |
msmith |
ACPI HID's aren't limited to 7 characters. Don't check the length of the HID passed in as an argument at all; callers are typically going to be sending us static strings anyway.
Submitted by: Munehiro Matsuda <haro@tk.kubota.co.jp>
|
69505 |
02-Dec-2000 |
scottl |
Revert attach() back to the old behaviour of calling bus_generic_attach(). The new way doesn't seem to work reliably and was causing devices to not be seen.
Approved by: msmith
|
69459 |
01-Dec-2000 |
msmith |
AcpiOsMem primitives as required by the new ACPI CA snapshot
|
69458 |
01-Dec-2000 |
msmith |
Update to work with the new ACPI CA snapshot.
- Use ACPI_PHYSICAL_ADDRESS - RSDT -> XSDT - FACP -> FADT - No APIC table support - Don't install a global EC handler; this has bad side-effects (it invokes _REG in *all* EC spaces in the namespace!) - Check for PCI bus instances already existing before adding them
|
68406 |
06-Nov-2000 |
msmith |
Remove unused PCI includes.
|
68067 |
31-Oct-2000 |
takawata |
If acpica driver is loaded using kldload(8), warn and just ignore.
|
67761 |
28-Oct-2000 |
msmith |
Initial FreeBSD OSPM (operating system power management) modules for ACPICA. Most of these are still works in progress. Support exists for:
- Fixed feature and control method power, lid and sleep buttons. - Detection of ISA PnP devices using ACPI namespace. - Detection of PCI root busses using ACPI namespace. - CPU throttling and sleep states (incomplete) - Thermal monitoring and cooling control (incomplete) - Interface to platform embedded controllers (mostly complete) - ACPI timer (incomplete) - Simple userland control of sleep states. - Shutdown and poweroff.
|
67760 |
28-Oct-2000 |
msmith |
FreeBSD-specific OSD (operating system dependant) modules for the Intel ACPICA code.
|