#
272461 |
|
02-Oct-2014 |
gjb |
Copy stable/10@r272459 to releng/10.1 as part of the 10.1-RELEASE process.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
256281 |
|
10-Oct-2013 |
gjb |
Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
186420 |
|
23-Dec-2008 |
sam |
NPE cleanups needed for ancillary drivers (e.g. crypto acceleration): o check feature bits when probing NPE ethernet support o move firmware loading logic from if_npe to core npe support o allow multiple refs to core NPE driver o while here fix hw.npe.debug tunable path
|
#
186352 |
|
20-Dec-2008 |
sam |
Merge support for Gateworks Cambria boards: o add support for IXP435 cpu's (e.g. 64 irq's) o add support for Cambria-specific devices: npe, led's (front panel and octal latch), ehci, mcu, ide cf o redo memory mapping for xscale/ixp4xx boards: previously memory was assumed aliased to 0x10000000 but this appears to be true only for ixp425 systems and breaks operation on others; rework so memory is assumed to start at 0 o rework NPE configuration support to use NPE id's instead of port #'s; these changes also rename the associated MAC's to follow the NPE's they are attached to o update npe firmware to latest rev (same license) and update default fw imageid's to match; in particular this adds NPE-A and crypto support o re-style NPE fw handling code and add a console msg identifying the attributes of the loaded fw o fix numerous problems with handling failures during npe setup o fix npe rx q setup; need to spin waiting for mailbox responses during early boot stages as qmgr interrupts are not delivered; this fixes the problem where all 8 traffic classifications were not tied to the rx q (and eliminates the console msg "remember to fix rx q setup") o add DELAY to npe MII wait logic for IXP435 o strip down builtin phys->virt address translation table in resource handling to just those resources that require it and add a console msg to alert people when this (kludge) table needs to be extended o purge a bunch of dead netbsd-ism's o cleanup avila led driver o add Cambria support to boot2 and rework code for better multi-board support
Notes: 1. NPE-A doesn't work and causes NPE-C to stop working; it is disabled in the hints 2. USB isn't working yet; controller communicates ok but device discovery fails 3. Cambria support must be configured separately from IXP425 boards; multi-board support is TBD
Sponsored by: Hobnob, Gateworks (board donation) Reviewed by: imp
|
#
172358 |
|
27-Sep-2007 |
cognet |
Ok I hope I got it right this time. After discussion with Sam, switch back to use firmware(9) instead of having the firmware in hex format. Put the binary firmware uuencoded into sys/contrib/dev/npe, and slap a LICENSE file, as found on the Intel website.
Approved by: re (blanket), mux (mentor) MFC After: 1 week
|
#
172357 |
|
27-Sep-2007 |
cognet |
Now that Intel changed the license for the NPE firmware, import it directly hexed into our tree, instead of requiring the user to download it.
Approved by: re (blanket) MFC after: 1 week
|
#
169954 |
|
24-May-2007 |
sam |
Search for a proper ucode image to use by incrementing the minor release number up to the max. This should eliminate the need to tweak the default imageid define for later releases that are found on the Intel web site.
MFC after: 1 month
|
#
164426 |
|
19-Nov-2006 |
sam |
Gateworks Avila board support: o ixp425 support o NPE network driver (requires Intel microcode) o h/w qmgr support o True IDE compact flash over expansion bus o pci (ath and hifn795x parts tested) o xscale watchdog timer o ds1672 RTC on i2c bus o ad7418 voltage + temp monitoring on i2c bus o uart
Work done together with cognet, kevlo, and jmg. Parts of the ixp425 support obtaine/derived from netbsd.
Reviewed by: cognet, imp MFC after: 1 month
|