#
272461 |
|
02-Oct-2014 |
gjb |
Copy stable/10@r272459 to releng/10.1 as part of the 10.1-RELEASE process.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation |
#
266341 |
|
17-May-2014 |
ian |
MFC 263910, 263913, 263914, 263933, 263934, 263935, 263936, 263981, 263982,
Add more flags for the fpexc register from the ARM1176JZF-S Manual
Initialise fpscr to a sane value when we create the pcb. This sets NaNs to be the default NaN and for denormalised numbers to be flushed to zero.
VFP fixes/cleanups for ARM11: * Save the required VFP registers on context switch. If the exception bit is set we need to save and restore the FPINST register, and if the fp2v bit is also set we need to save and restore FPINST2. * Move saving and restoring the floating point control registers to C. * Clear the fpexc exception and fp2v flags on a floating-point exception. * Signal a SIGFPE if the fpexc exception flag is set on an undefined instruction. This is how the ARM core signals to software there is a floating-point exception.
Add Cortex-A15 cpu id revisions.
Exynos/Arndale... - Merge SoC-common parts - Enable iicbus device - Directly call kmem_alloc_contig to allocate framebuffer memory and pass VM_MEMATTR_UNCACHEABLE (no-cache, no-buffer). This fixes screen refreshing problem when data is updated too slowly. - Add support for keyboard used in Samsung Chromebook (ARM machine) Support covers device drivers for: - Interrupt Combiner - gpio/pad, External Interrupts Controller (pad) - I2C Interface - Chrome Embedded Controller - Chrome Keyboard - Use new gpio dev class in EHCI driver - Expand device tree information - Release i2c bus on detach.
|
#
266277 |
|
16-May-2014 |
ian |
MFC 257774, 256760, 262916, 262905, 262918, 262919, 262920, 262921, 262924, 262925, 262929, 262932, 262935, 262940, 262941, 262942, 262948, 262949, 262950
Strip arm/conf/DEFAULTS down to just items that are mandatory for running the architecture.
Move all the files named foo/common.c to foo/foo_common.c
Initial cut for DTS on the hl201 board.
Add commented out dts for sam9260ek as well as early printf support.
Make clock optional on uart nodes, then back it out ("I don't know what I was thinking, but it is lame.")
Set the baud rate if it isn't 0
Make at91_soc_id() public.
Properly round at91 resource on unmapping.
Move AT91 AIC related stuff to own file.
Fix another bug in multicast filtering. i.MX uses 6 bits from MSB in LE CRC32 for the hash value, not the lowest 6 bits in BE CRC32.
Follow r262916 with one more config file that references a renamed common.c
Remove bogus AT91 define that causes compile errors. Most of the defines for SAM9X are going away soonish anyway (once FDT works), but until then...
Remove all dregs of a per-thread undefined-exception-mode stack.
Rework the VFP code that handles demand-based save and restore of state.
Always call vfp_discard() on thread death.
When a thread begins life it doesn't own the VFP hardware state on any cpu.
Make undefined exception entry MP-safe.
|
#
266160 |
|
15-May-2014 |
ian |
MFC r261423, r261424, r261516, r261513, r261562, r261563, r261564, r261565, r261596, r261606
Add the imx sdhci controller.
Move Open Firmware device root on PowerPC, ARM, and MIPS systems to a sub-node of nexus (ofwbus) rather than direct attach under nexus. This fixes FDT on x86 and will make coexistence with ACPI on ARM systems easier. SPARC is unchanged.
Add the missing ')' at end of sentence. Reword it to use a more common idiom.
Pass the kernel physical address to initarm through the boot param struct.
Make functions only used in vfp.c static, and remove vfp_enable.
Fix __syscall on armeb EABI. As it returns a 64-bit value it needs to place 32-bit data in r1, not r0. 64-bit data is already packed correctly.
Use abp_physaddr for the physical address over KERNPHYSADDR. This helps us remove the need to load the kernel at a fixed address.
Remove references to PHYSADDR where it's used only in debugging output.
Dynamically generate the page table. This will allow us to detect the physical address we are loaded at to change the mapping.
|
#
266159 |
|
15-May-2014 |
ian |
MFC r261414, r261415, r261417, r261418, r261419
Don't call device_set_ivars() for the mmchs
Change the way pcpu and curthread are stored per-core
Invalidate cachelines for bounce pages on PREREAD too, there may still be stale entries from a previous transfer.
Only use the CPU ID register if SMP is defined. Some non-MPCore armv6 cpu, such as the one found in the RPi, don't have it, and just hang when we try to access it.
|
#
259329 |
|
13-Dec-2013 |
ian |
MFC r257199, r257200, r257217:
Remove all #include <machine/pmap.h> from arm code. It's already included by vm/pmap.h, which is a prerequisite for arm/machine/pmap.h so there's no reason to ever include it directly.
Remove #include <machine/frame.h> from all the arm code that doesn't really need it. That would be almost everywhere it was included. Add it in a couple files that really do need it and were previously getting it by accident via another header.
Remove the last dregs of trapframe_t. It turns out only arm was using this type, so remove it to make arm code more consistant with other platforms.
|
#
256281 |
|
10-Oct-2013 |
gjb |
Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.
Approved by: re (implicit) Sponsored by: The FreeBSD Foundation
|
#
254461 |
|
17-Aug-2013 |
andrew |
Rename device vfp to option VFP and retire the ARM_VFP_SUPPORT option. This simplifies enabling as previously both options were required to be enabled, now we only need a single option.
While here enable VFP on the PandaBoard.
|
#
253400 |
|
16-Jul-2013 |
andrew |
Fix vfp: - We should check is_d32 to see howmany registers we have - In vfp_restore mark vfpscr as an output register
Without the second part it appears we can return the incorrect value from vfp_bounce if the VFP condition flags are set as it may override the register holding the return value.
|
#
252837 |
|
05-Jul-2013 |
andrew |
Fix the build with gcc.
Gcc outputs pre-UAL asm and expects the ldcl instruction with a condition in the form ldc<c>l, where the code produces the instruction in the UAL form ldcl<c>. Work around this by checking if we are using clang or gcc and adjusting the instruction.
While here correct the cmp instruction's value to include the # before the immediate value.
|
#
251712 |
|
13-Jun-2013 |
andrew |
Fix the vfp code to work with the 16 register variants of the VFP unit. We check which variant we are on, and if it is a VFPv3 or v4, and has 32 double registers we save these. This fixes VFP support on Raspberry Pi.
While here clean fmrx and fmxr up to use the register names from vfp.h as opposed to the raw register names.
|
#
249176 |
|
05-Apr-2013 |
andrew |
Add the hw.floatingpoint sysctl to ARM to tell us if we have vfp support in the kernel and the hardware includes a vfp unit.
|
#
247340 |
|
26-Feb-2013 |
cognet |
Fix SMP build.
|
#
239268 |
|
15-Aug-2012 |
gonzo |
Merging projects/armv6, part 1
Cummulative patch of changes that are not vendor-specific: - ARMv6 and ARMv7 architecture support - ARM SMP support - VFP/Neon support - ARM Generic Interrupt Controller driver - Simplification of startup code for all platforms
|