- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Implement the ip, tcp, and udp DTrace providers. The probe definitions use
dynamic translation so that their arguments match the definitions for
these providers in Solaris and illumos. Thus, existing scripts for these
providers should work unmodified on FreeBSD.

Tested by: gnn, hiren
MFC after: 1 month

Remove the large part of struct ipsecstat. Only few fields of this
structure is used, but they already have equal fields in the struct
newipsecstat, that was introduced with FAST_IPSEC and then was merged
together with old ipsecstat structure.

This fixes kernel stack overflow on some architectures after migration
ipsecstat to PCPU counters.

Reported by: Taku YAMAMOTO, Maciej Milewski

Use IPSECSTAT_INC() and IPSEC6STAT_INC() macros for ipsec statistics
accounting.

MFC after: 2 weeks

Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags within sys.

Exceptions:

- sys/contrib not touched
- sys/mbuf.h edited manually

Remove the recently added sysctl variable net.pfil.forward.
Instead, add protocol specific mbuf flags M_IP_NEXTHOP and
M_IP6_NEXTHOP. Use them to indicate that the mbuf's chain
contains the PACKET_TAG_IPFORWARD tag. And do a tag lookup
only when this flag is set.

Suggested by: andre

Remove the IPFIREWALL_FORWARD kernel option and make possible to turn
on the related functionality in the runtime via the sysctl variable
net.pfil.forward. It is turned off by default.

Sponsored by: Yandex LLC
Discussed with: net@
MFC after: 2 weeks

Mechanically remove the last stray remains of spl* calls from net*/*.
They have been Noop's for a long time now.

It turns out that too many drivers are not only parsing the L2/3/4
headers for TSO but also for generic checksum offloading. Ideally we
would only have one common function shared amongst all drivers, and
perhaps when updating them for IPv6 we should introduce that.
Eventually we should provide the meta information along with mbufs to
avoid (re-)parsing entirely.

To not break IPv6 (checksums and offload) and to be able to MFC the
changes without risking to hurt 3rd party drivers, duplicate the v4
framework, as other OSes have done as well.

Introduce interface capability flags for TX/RX checksum offload with
IPv6, to allow independent toggling (where possible). Add CSUM_*_IPV6
flags for UDP/TCP over IPv6, and reserve further for SCTP, and IPv6
fragmentation. Define CSUM_DELAY_DATA_IPV6 as we do for legacy IP and
add an alias for CSUM_DATA_VALID_IPV6.

This pretty much brings IPv6 handling in line with IPv4.
TSO is still handled in a different way and not via if_hwassist.

Update ifconfig to allow (un)setting of the new capability flags.
Update loopback to announce the new capabilities and if_hwassist flags.

Individual driver updates will have to follow, as will SCTP.

Reported by: gallatin, dim, ..
Reviewed by: gallatin (glanced at?)
MFC after: 3 days
X-MFC with: r235961,235959,235958

MFp4 bz_ipv6_fast:

Defer checksum calulations on UDP6 output and respect the mbuf
flags set by NICs having done checksum validation for us already,
thus saving the computing time in the input path as well.

Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems

Reviewed by: gnn (as part of the whole)
MFC After: 3 days

Add support for IPv6 to ipfw fwd:
Distinguish IPv4 and IPv6 addresses and optional port numbers in
user space to set the option for the correct protocol family.
Add support in the kernel for carrying the new IPv6 destination
address and port.
Add support to TCP and UDP for IPv6 and fix UDP IPv4 to not change
the address in the IP header.
Add support for IPv6 forwarding to a non-local destination.
Add a regession test uitilizing VIMAGE to check all 20 possible
combinations I could think of.

Obtained from: David Dolson at Sandvine Incorporated
(original version for ipfw fwd IPv6 support)
Sponsored by: Sandvine Incorporated
PR: bin/117214
MFC after: 4 weeks
Approved by: re (kib)

Add _mbuf() variants of various inpcb-related interfaces, including lookup,
hash install, etc. For now, these are arguments are unused, but as we add
RSS support, we will want to use hashes extracted from mbufs, rather than
manually calculated hashes of header fields, due to the expensive of the
software version of Toeplitz (and similar hashes).

Add notes that it would be nice to be able to pass mbufs into lookup
routines in pf(4), optimising firewall lookup in the same way, but the
code structure there doesn't facilitate that currently.

(In principle there is no reason this couldn't be MFCed -- the change
extends rather than modifies the KBI. However, it won't be useful without
other previous possibly less MFCable changes.)

Reviewed by: bz
Sponsored by: Juniper Networks, Inc.

Decompose the current single inpcbinfo lock into two locks:

- The existing ipi_lock continues to protect the global inpcb list and
inpcb counter. This lock is now relegated to a small number of
allocation and free operations, and occasional operations that walk
all connections (including, awkwardly, certain UDP multicast receive
operations -- something to revisit).

- A new ipi_hash_lock protects the two inpcbinfo hash tables for
looking up connections and bound sockets, manipulated using new
INP_HASH_*() macros. This lock, combined with inpcb locks, protects
the 4-tuple address space.

Unlike the current ipi_lock, ipi_hash_lock follows the individual inpcb
connection locks, so may be acquired while manipulating a connection on
which a lock is already held, avoiding the need to acquire the inpcbinfo
lock preemptively when a binding change might later be required. As a
result, however, lookup operations necessarily go through a reference
acquire while holding the lookup lock, later acquiring an inpcb lock --
if required.

A new function in_pcblookup() looks up connections, and accepts flags
indicating how to return the inpcb. Due to lock order changes, callers
no longer need acquire locks before performing a lookup: the lookup
routine will acquire the ipi_hash_lock as needed. In the future, it will
also be able to use alternative lookup and locking strategies
transparently to callers, such as pcbgroup lookup. New lookup flags are,
supplementing the existing INPLOOKUP_WILDCARD flag:

INPLOOKUP_RLOCKPCB - Acquire a read lock on the returned inpcb
INPLOOKUP_WLOCKPCB - Acquire a write lock on the returned inpcb

Callers must pass exactly one of these flags (for the time being).

Some notes:

- All protocols are updated to work within the new regime; especially,
TCP, UDPv4, and UDPv6. pcbinfo ipi_lock acquisitions are largely
eliminated, and global hash lock hold times are dramatically reduced
compared to previous locking.
- The TCP syncache still relies on the pcbinfo lock, something that we
may want to revisit.
- Support for reverting to the FreeBSD 7.x locking strategy in TCP input
is no longer available -- hash lookup locks are now held only very
briefly during inpcb lookup, rather than for potentially extended
periods. However, the pcbinfo ipi_lock will still be acquired if a
connection state might change such that a connection is added or
removed.
- Raw IP sockets continue to use the pcbinfo ipi_lock for protection,
due to maintaining their own hash tables.
- The interface in6_pcblookup_hash_locked() is maintained, which allows
callers to acquire hash locks and perform one or more lookups atomically
with 4-tuple allocation: this is required only for TCPv6, as there is no
in6_pcbconnect_setup(), which there should be.
- UDPv6 locking remains significantly more conservative than UDPv4
locking, which relates to source address selection. This needs
attention, as it likely significantly reduces parallelism in this code
for multithreaded socket use (such as in BIND).
- In the UDPv4 and UDPv6 multicast cases, we need to revisit locking
somewhat, as they relied on ipi_lock to stablise 4-tuple matches, which
is no longer sufficient. A second check once the inpcb lock is held
should do the trick, keeping the general case from requiring the inpcb
lock for every inpcb visited.
- This work reminds us that we need to revisit locking of the v4/v6 flags,
which may be accessed lock-free both before and after this change.
- Right now, a single lock name is used for the pcbhash lock -- this is
undesirable, and probably another argument is required to take care of
this (or a char array name field in the pcbinfo?).

This is not an MFC candidate for 8.x due to its impact on lookup and
locking semantics. It's possible some of these issues could be worked
around with compatibility wrappers, if necessary.

Reviewed by: bz
Sponsored by: Juniper Networks, Inc.

Make the UDP code compile without INET. Expose udp_usrreq.c to IPv6 only
as well compiling out most functions adding or extending #ifdef INET
coverage.

Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 4 days

Remove a check in udp6_send() that prevented v4-mapped v6 addresses from
working. We store v4 and v6 addresses as a union but for v4-mapped
addresses only store the 32bits w/o the ::ffff: word. That failed the
check as for example 127.0.0.1 would be ::7f00:1 rather than ::ffff:7f00:1
and the IN6_IS_ADDR_V4MAPPED() never worked here. Given we can hardly get
here with an unbound local address or invalid inp_vflags remove the check.

Reported by: tuexen
Reviewed by: tuexen
MFC after: 3 days

After r219579 and r219779 unbreak v4-mapped v6 sockets for UDP
some more. Similar to what we do for TCP check for v4-mapped
addresses and then handle them or the normal v6 address case.
For either set inp_vflags before calling into the pcb connect
function so that we have an unambiguous view in case we need to
set the local address or port.

Looked at: tuexen (as part of more)
MFC after: 3 days

Push a possible "unbind" in some situation from in6_pcbsetport() to
callers. This also fixes a problem when the prison call could set
the inp->in6p_laddr (laddr) and a following priv_check_cred() call
would return an error and will allow us to merge the IPv4 and IPv6
implementation.

MFC after: 2 weeks

Add flowtable support to IPv6

Tested by: qingli@

Reviewed by: qingli@
MFC after: 3 days

Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by: bz
Approved by: re (vimage blanket)

Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator. Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...). This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack. Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory. Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy. Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address. When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by: bz
Reviewed by: bz, zec
Discussed with: gnn, jamie, jeff, jhb, julian, sam
Suggested by: peter
Approved by: re (kensmith)

Make callers to in6_selectsrc() and in6_pcbladdr() pass in memory
to save the selected source address rather than returning an
unreferenced copy to a pointer that might long be gone by the
time we use the pointer for anything meaningful.

Asked for by: rwatson
Reviewed by: rwatson

Move "options MAC" from opt_mac.h to opt_global.h, as it's now in GENERIC
and used in a large number of files, but also because an increasing number
of incorrect uses of MAC calls were sneaking in due to copy-and-paste of
MAC-aware code without the associated opt_mac.h include.

Discussed with: pjd

Implement UDP control block support.

So far the udp_tun_func_t had been (ab)using inp_ppcb for udp in kernel
tunneling callbacks. Move that into the udpcb and add a field for flags
there to be used by upcoming changes instead of sticking udp only flags
into in_pcb flags2.

Bump __FreeBSD_version for ports to detect it and because of vnet* struct
size changes.

Submitted by: jhb (7.x version)
Reviewed by: rwatson

Limit scope of acquisition of INP_RLOCK for multicast input filter
to the scope of its use, even though this may thrash the lock if
the INP is referenced for other purposes.

Tested by: David Wolfskill

Bite the bullet, and make the IPv6 SSM and MLDv2 mega-commit:
import from p4 bms_netdev. Summary of changes:

* Connect netinet6/in6_mcast.c to build.
The legacy KAME KPIs are mostly preserved.
* Eliminate now dead code from ip6_output.c.
Don't do mbuf bingo, we are not going to do RFC 2292 style
CMSG tricks for multicast options as they are not required
by any current IPv6 normative reference.
* Refactor transports (UDP, raw_ip6) to do own mcast filtering.
SCTP, TCP unaffected by this change.
* Add ip6_msource, in6_msource structs to in6_var.h.
* Hookup mld_ifinfo state to in6_ifextra, allocate from
domifattach path.
* Eliminate IN6_LOOKUP_MULTI(), it is no longer referenced.
Kernel consumers which need this should use in6m_lookup().
* Refactor IPv6 socket group memberships to use a vector (like IPv4).
* Update ifmcstat(8) for IPv6 SSM.
* Add witness lock order for IN6_MULTI_LOCK.
* Move IN6_MULTI_LOCK out of lower ip6_output()/ip6_input() paths.
* Introduce IP6STAT_ADD/SUB/INC/DEC as per rwatson's IPv4 cleanup.
* Update carp(4) for new IPv6 SSM KPIs.
* Virtualize ip6_mrouter socket.
Changes mostly localized to IPv6 MROUTING.
* Don't do a local group lookup in MROUTING.
* Kill unused KAME prototypes in6_purgemkludge(), in6_restoremkludge().
* Preserve KAME DAD timer jitter behaviour in MLDv1 compatibility mode.
* Bump __FreeBSD_version to 800084.
* Update UPDATING.

NOTE WELL:
* This code hasn't been tested against real MLDv2 queriers
(yet), although the on-wire protocol has been verified in Wireshark.
* There are a few unresolved issues in the socket layer APIs to
do with scope ID propagation.
* There is a LOR present in ip6_output()'s use of
in6_setscope() which needs to be resolved. See comments in mld6.c.
This is believed to be benign and can't be avoided for the moment
without re-introducing an indirect netisr.

This work was mostly derived from the IGMPv3 implementation, and
has been sponsored by a third party.

Commit file omitted in r190962:

Update stats in struct udpstat using two new macros, UDPSTAT_ADD()
and UDPSTAT_INC(), rather than directly manipulating the fields
across the kernel. This will make it easier to change the
implementation of these statistics, such as using per-CPU versions
of the data structures.

MFC after: 3 days

Don't bother null-checking the thread pointer before the prison checks
in udp6_connect (td is already dereferenced elsewhere without such a
check). This makes the conversion from a sockaddr to a sockaddr_in6
always happen, so convert once at the beginning of the function rather
than twice in the middle.

Approved by: bz (mentor)

Standardize the various prison_foo_ip[46] functions and prison_if to
return zero on success and an error code otherwise. The possible errors
are EADDRNOTAVAIL if an address being checked for doesn't match the
prison, and EAFNOSUPPORT if the prison doesn't have any addresses in
that address family. For most callers of these functions, use the
returned error code instead of e.g. a hard-coded EADDRNOTAVAIL or
EINVAL.

Always include a jailed() check in these functions, where a non-jailed
cred always returns success (and makes no changes). Remove the explicit
jailed() checks that preceded many of the function calls.

Approved by: bz (mentor)

Addresses Roberts comments on comments. Also adds
the KASSERT and checks suggested.

Reviewed by: The udp tunneling was discussed on net@ under the
thread entitled "Heads up -- Thinking about UDP and tunneling"

Add the ability of an alternate transport protocol
to easily tunnel over udp by providing a hook
function that will be called instead of appending
to the socket buffer.

Another step assimilating IPv[46] PCB code:
normalize IN6P_* compat flags usage to their equialent
INP_* counterpart.

Discussed with: rwatson
Reviewed by: rwatson
MFC after: 4 weeks

Another step assimilating IPv[46] PCB code - directly use
the inpcb names rather than the following IPv6 compat macros:
in6pcb,in6p_sp, in6p_ip6_nxt,in6p_flowinfo,in6p_vflag,
in6p_flags,in6p_socket,in6p_lport,in6p_fport,in6p_ppcb and
sotoin6pcb().

Apart from removing duplicate code in netipsec, this is a pure
whitespace, not a functional change.

Discussed with: rwatson
Reviewed by: rwatson (version before review requested changes)
MFC after: 4 weeks (set the timer and see then)

Rather than using hidden includes (with cicular dependencies),
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.

For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.

Reviewed by: brooks, gnn, des, zec, imp
Sponsored by: The FreeBSD Foundation

MFp4:
Bring in updated jail support from bz_jail branch.

This enhances the current jail implementation to permit multiple
addresses per jail. In addtion to IPv4, IPv6 is supported as well.
Due to updated checks it is even possible to have jails without
an IP address at all, which basically gives one a chroot with
restricted process view, no networking,..

SCTP support was updated and supports IPv6 in jails as well.

Cpuset support permits jails to be bound to specific processor
sets after creation.

Jails can have an unrestricted (no duplicate protection, etc.) name
in addition to the hostname. The jail name cannot be changed from
within a jail and is considered to be used for management purposes
or as audit-token in the future.

DDB 'show jails' command was added to aid debugging.

Proper compat support permits 32bit jail binaries to be used on 64bit
systems to manage jails. Also backward compatibility was preserved where
possible: for jail v1 syscalls, as well as with user space management
utilities.

Both jail as well as prison version were updated for the new features.
A gap was intentionally left as the intermediate versions had been
used by various patches floating around the last years.

Bump __FreeBSD_version for the afore mentioned and in kernel changes.

Special thanks to:
- Pawel Jakub Dawidek (pjd) for his multi-IPv4 patches
and Olivier Houchard (cognet) for initial single-IPv6 patches.
- Jeff Roberson (jeff) and Randall Stewart (rrs) for their
help, ideas and review on cpuset and SCTP support.
- Robert Watson (rwatson) for lots and lots of help, discussions,
suggestions and review of most of the patch at various stages.
- John Baldwin (jhb) for his help.
- Simon L. Nielsen (simon) as early adopter testing changes
on cluster machines as well as all the testers and people
who provided feedback the last months on freebsd-jail and
other channels.
- My employer, CK Software GmbH, for the support so I could work on this.

Reviewed by: (see above)
MFC after: 3 months (this is just so that I get the mail)
X-MFC Before: 7.2-RELEASE if possible

Merge in6_pcbfree() into in_pcbfree() which after the previous
IPsec change in r185366 only differed in two additonal IPv6 lines.
Rather than splattering conditional code everywhere add the v6
check centrally at this single place.

Reviewed by: rwatson (as part of a larger changset)
MFC after: 6 weeks (*)
(*) possibly need to leave a stub wrapper in 7 to keep the symbol.

Remove in6_pcbdetach() as it is exactly the same function
as in_pcbdetach() and we don't need the code twice.

Reviewed by: rwatson
MFC after: 6 weeks (*)
(*) possibly need to leave a stub wrapper in 7 to keep the symbol.

When disconnecting a UDPv6 socket, acquire the socket lock around the
changing of the so_state field, as is done in UDPv4. Remove XXX
locking comment.

MFC after: 3 days

Cache so_cred as inp_cred in the inpcb.
This means that inp_cred is always there, even after the socket
has gone away. It also means that it is constant for the lifetime
of the inp.
Both facts lead to simpler code and possibly less locking.

Suggested by: rwatson
Reviewed by: rwatson
MFC after: 6 weeks
X-MFC Note: use a inp_pspare for inp_cred

Step 1.5 of importing the network stack virtualization infrastructure
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit

Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.

Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().

Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).

All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).

(*) netipsec/keysock.c did not validate depending on compile time options.

Implemented by: julian, bz, brooks, zec
Reviewed by: julian, bz, brooks, kris, rwatson, ...
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation

When invoking the udp_send() from udp6_send() due to use of a v6-mapped
IPv4 address, first drop the udbinfo and inpcb locks, which will otherwise
be recursed. This leads to a potential minor race, but is preferable to a
deadlock when acquiring a read lock after a write lock on the inpcb.

MFC after: 3 days
Reported by: Norbert Papke <fbsd-ml@scrapper.ca>, lioux

In UDPv6, reduce scope of global udbinfo lock during append to last
matching socket by dropping it before udp6_append(), and remove
duplicate unlocks of udbinfo and inpcb in sysctl return path.

MFC after: 3 days

Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from: //depot/projects/vimage-commit2/...
Reviewed by: brooks, des, ed, mav, julian,
jamie, kris, rwatson, zec, ...
(various people I forgot, different versions)
md5 (with a bit of help)
Sponsored by: NLnet Foundation, The FreeBSD Foundation
X-MFC after: never
V_Commit_Message_Reviewed_By: more people than the patch

Change the parameters to in6_selectsrc():
- pass in the inp instead of both in6p_moptions and laddr.
- pass in cred for upcoming prison checks.

Reviewed by: rwatson

Use soreceive_dgram() and sosend_dgram() with UDPv6, as we do with UDPv4.

Tested by: ps
MFC after: 3 months

Drop read lock on udbinfo earlier during delivery to the last matching
UDP socket for a datagram; the inpcb read lock is sufficient to provide
inpcb stability during udp6_append().

MFC after: 1 month

Employ read locks on UDP inpcbs, rather than write locks, when
monitoring UDP connections using sysctls. In some cases, add
previously missing locking of inpcbs, as inp_socket is followed,
which also allows us to drop global locks more quickly.

MFC after: 1 week

Acquire a read lock, rather than a write lock, on a UDPv6 inpcb when
delivering to the socket or extracting socket details for monitoring
purposes.

MFC after: 3 months

Convert pcbinfo and inpcb mutexes to rwlocks, and modify macros to
explicitly select write locking for all use of the inpcb mutex.
Update some pcbinfo lock assertions to assert locked rather than
write-locked, although in practice almost all uses of the pcbinfo
rwlock main exclusive, and all instances of inpcb lock acquisition
are exclusive.

This change should introduce (ideally) little functional change.
However, it lays the groundwork for significantly increased
parallelism in the TCP/IP code.

MFC after: 3 months
Tested by: kris (superset of committered patch)

Replace the last susers calls in netinet6/ with privilege checks.

Introduce a new privilege allowing to set certain IP header options
(hop-by-hop, routing headers).

Leave a few comments to be addressed later.

Reviewed by: rwatson (older version, before addressing his comments)

un-__P()

Clean up VCS Ids.

Merge first in a series of TrustedBSD MAC Framework KPI changes
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:

mac_<object>_<method/action>
mac_<object>_check_<method/action>

The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.

All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.

Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer

Continue UDP/UDPv6 synchronization project:

- Fix copyrights, comments in UDPv6.
- Remove macro defines for in6pcb and udp6stat.
- Consistently refer to inpcbs as 'inp' and not also 'in6p'.

Reviewed by: gnn, jinmei, bz
Approved by: re (bmah)

Continue effort to improve parity between UDPv4 and UDPv6: add a missing
scope security check for the UDPv6 socket credential lookup service,
allowing security policies to bound access to credential information.
While not an immediate issue for Jail, which doesn't allow use of UDPv6,
this may be relevant to other security policies that may wish to control
ident lookups.

While here, eliminate a very unlikely panic case, in which a socket in
the process of being freed is inspected by the sysctl.

Approved by: re (kensmith)
Reviewed by: bz

Continue effort to align UDPv4 and UDPv6 implementations by merging
udp6_output() from udp6_output.c to udp6_usrreq.c, matching the UDPv4
structure, and allowing us to remove udp6_output.c.

Reviewed by: bz, gnn
Approved by: re (bmah)

Attempt to improve feature parity between UDPv4 and UDPv6 by merging
UDPv4 features to UDPv6:

- Add MAC checks on delivery and MAC labeling on transmit.
- Check for (and reject) datagrams with destination port 0.
- For multicast delivery, check the source port only if the socket being
considered as a destination has been connected.
- Implement UDP blackholing based on net.inet.udp.blackhole.
- Add a new ICMPv6 unreachable reply rate limiting category for failed
delivery attempts and implement rate limiting for UDPv6 (submitted by
bz).

Approved by: re (kensmith)
Reviewed by: bz

General style, white space, and comment cleanup; move to ANSI C
prototypes, don't use register, etc. Synchronize structure and
layout to the IPv4 versions of these functions to a greater extent,
making visual comparison easier.

Remove now stale or incorrect comments.

Enable full lock assertions, and correct one exception handling
case where the wrong label was jumped to.

Tested by: bz
Approved by: re (bmah)

Space cleanup

Approved by: re (rwatson)

ANSIfy[1] plus some style cleanup nearby.

Discussed with: gnn, rwatson
Submitted by: Karl Sj?dahl - dunceor <dunceor gmail com> [1]
Approved by: re (rwatson)

Commit the change from FAST_IPSEC to IPSEC. The FAST_IPSEC
option is now deprecated, as well as the KAME IPsec code.
What was FAST_IPSEC is now IPSEC.

Approved by: re
Sponsored by: Secure Computing

Commit IPv6 support for FAST_IPSEC to the tree.
This commit includes only the kernel files, the rest of the files
will follow in a second commit.

Reviewed by: bz
Approved by: re
Supported by: Secure Computing

Eliminate now-unused SUSER_ALLOWJAIL arguments to priv_check_cred(); in
some cases, move to priv_check() if it was an operation on a thread and
no other flags were present.

Eliminate caller-side jail exception checking (also now-unused); jail
privilege exception code now goes solely in kern_jail.c.

We can't yet eliminate suser() due to some cases in the KAME code where
a privilege check is performed and then used in many different deferred
paths. Do, however, move those prototypes to priv.h.

Reviewed by: csjp
Obtained from: TrustedBSD Project

Rename two identically named log_in_vain variables: tcp_input.c's static
log_in_vain to tcp_log_in_vain, and udp_usrreq's global log_in_vain to
udp_log_in_vain.

MFC after: 1 week

MFp4: 92972, 98913 + one more change

In ip6_sprintf no longer use and return one of eight static buffers
for printing/logging ipv6 addresses.
The caller now has to hand in a sufficiently large buffer as first
argument.

Sweep kernel replacing suser(9) calls with priv(9) calls, assigning
specific privilege names to a broad range of privileges. These may
require some future tweaking.

Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>

All multicast listeners on a port should get one copy of the packet. This
was broken during the locking changes.

Change semantics of socket close and detach. Add a new protocol switch
function, pru_close, to notify protocols that the file descriptor or
other consumer of a socket is closing the socket. pru_abort is now a
notification of close also, and no longer detaches. pru_detach is no
longer used to notify of close, and will be called during socket
tear-down by sofree() when all references to a socket evaporate after
an earlier call to abort or close the socket. This means detach is now
an unconditional teardown of a socket, whereas previously sockets could
persist after detach of the protocol retained a reference.

This faciliates sharing mutexes between layers of the network stack as
the mutex is required during the checking and removal of references at
the head of sofree(). With this change, pru_detach can now assume that
the mutex will no longer be required by the socket layer after
completion, whereas before this was not necessarily true.

Reviewed by: gnn

Fix race conditions on enumerating pcb lists by moving the initialization
( and where appropriate the destruction) of the pcb mutex to the init/finit
functions of the pcb zones.
This allows locking of the pcb entries and race condition free comparison
of the generation count.
Rearrange locking a bit to avoid extra locking operation to update the generation
count in in_pcballoc(). (in_pcballoc now returns the pcb locked)

I am planning to convert pcb list handling from a type safe to a reference count
model soon. ( As this allows really freeing the PCBs)

Reviewed by: rwatson@, mohans@
MFC after: 1 week

In IN6_IS_ADDR_V4MAPPED case instead of returning directly set error and
goto out so that locks will be dropped.

Reviewed by: rwatson, gnn

Break out socket access control and delivery logic from udp6_input()
into its own function, udp6_append(). This mirrors a similar structure
in udp_input() and udp_append(), and makes the whole thing a lot more
readable.

While here, add missing inpcb locking in UDP6 input path.

Reviewed by: bz
MFC after: 3 months

Add comment to udp6_input() that locking is missing from multicast
UDPv6 delivery.

Lock the inpcb of the UDP connection being delivered to before
processing IPSEC policy and other delivery activities.

MFC after: 3 months

Add udbinfo locking in udp6_input() to protect lookups of the inpcb
lists during UDPv6 receipt.

MFC after: 3 months

Add missing locking to udp6_getcred(), remove spl use.

MFC after: 3 months

Fix assertion description: !=, not ==.

Submitted by: pjd
MFC after: 3 months

Update in_pcb-derived basic socket types following changes to
pru_abort(), pru_detach(), and in_pcbdetach():

- Universally support and enforce the invariant that so_pcb is
never NULL, converting dozens of unnecessary NULL checks into
assertions, and eliminating dozens of unnecessary error handling
cases in protocol code.

- In some cases, eliminate unnecessary pcbinfo locking, as it is no
longer required to ensure so_pcb != NULL. For example, in protocol
shutdown methods, and in raw IP send.

- Abort and detach protocol switch methods no longer return failures,
nor attempt to free sockets, as the socket layer does this.

- Invoke in_pcbfree() after in_pcbdetach() in order to free the
detached in_pcb structure for a socket.

MFC after: 3 months

Chance protocol switch method pru_detach() so that it returns void
rather than an error. Detaches do not "fail", they other occur or
the protocol flags SS_PROTOREF to take ownership of the socket.

soclose() no longer looks at so_pcb to see if it's NULL, relying
entirely on the protocol to decide whether it's time to free the
socket or not using SS_PROTOREF. so_pcb is now entirely owned and
managed by the protocol code. Likewise, no longer test so_pcb in
other socket functions, such as soreceive(), which have no business
digging into protocol internals.

Protocol detach routines no longer try to free the socket on detach,
this is performed in the socket code if the protocol permits it.

In rts_detach(), no longer test for rp != NULL in detach, and
likewise in other protocols that don't permit a NULL so_pcb, reduce
the incidence of testing for it during detach.

netinet and netinet6 are not fully updated to this change, which
will be in an upcoming commit. In their current state they may leak
memory or panic.

MFC after: 3 months

Change protocol switch pru_abort() API so that it returns void rather
than an int, as an error here is not meaningful. Modify soabort() to
unconditionally free the socket on the return of pru_abort(), and
modify most protocols to no longer conditionally free the socket,
since the caller will do this.

This commit likely leaves parts of netinet and netinet6 in a situation
where they may panic or leak memory, as they have not are not fully
updated by this commit. This will be corrected shortly in followup
commits to these components.

MFC after: 3 months

make IPV6_V6ONLY socket option work for UDP as well.

PR: ports/92620
Reported by: Kurt Miller <kurt__at__intricatesoftware.com>
MFC after: 1 week

scope cleanup. with this change
- most of the kernel code will not care about the actual encoding of
scope zone IDs and won't touch "s6_addr16[1]" directly.
- similarly, most of the kernel code will not care about link-local
scoped addresses as a special case.
- scope boundary check will be stricter. For example, the current
*BSD code allows a packet with src=::1 and dst=(some global IPv6
address) to be sent outside of the node, if the application do:
s = socket(AF_INET6);
bind(s, "::1");
sendto(s, some_global_IPv6_addr);
This is clearly wrong, since ::1 is only meaningful within a single
node, but the current implementation of the *BSD kernel cannot
reject this attempt.

Submitted by: JINMEI Tatuya <jinmei__at__isl.rdc.toshiba.co.jp>
Obtained from: KAME

Lock udbinfo and inp before calling in6_pcbdetach() from udp6_abort().

MFC after: 1 week

/* -> /*- for license, minor formatting changes, separate for KAME

Initialize struct pr_userreqs in new/sparse style and fill in common
default elements in net_init_domain().

This makes it possible to grep these structures and see any bogosities.

Pass pcbinfo structures to in6_pcbnotify() rather than pcbhead
structures, allowing in6_pcbnotify() to lock the pcbinfo and each
inpcb that it notifies of ICMPv6 events. This prevents inpcb
assertions from firing when IPv6 generates and delievers event
notifications for inpcbs.

Reported by: kuriyama
Tested by: kuriyama

Forced commit to note that the previous commit was:

Approved by: suz (core@kame.net)

Commit a first pass at in6pcb and pcbinfo locking for IPv6,
synchronizing IPv6 protocol control blocks and lists. These changes
are modeled on the inpcb locking for IPv4, submitted by Jennifer Yang,
and committed by Jeffrey Hsu. With these locking changes, IPv6 use of
inpcbs is now substantially more MPSAFE, and permits IPv4 inpcb locking
assertions to be run in the presence of IPv6 compiled into the kernel.

Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson

UDP checksum is mandatory in IPv6 (RFC2460 p.28)

Obtained from: KAME

Reduce 'td' argument to 'cred' (struct ucred) argument in those functions:
- in_pcbbind(),
- in_pcbbind_setup(),
- in_pcbconnect(),
- in_pcbconnect_setup(),
- in6_pcbbind(),
- in6_pcbconnect(),
- in6_pcbsetport().
"It should simplify/clarify things a great deal." --rwatson

Requested by: rwatson
Reviewed by: rwatson, ume

Remove unused argument.

Reviewed by: ume

IPSEC and FAST_IPSEC have the same internal API now;
so merge these (IPSEC has an extra ipsecstat)

Submitted by: "Bjoern A. Zeeb" <bzeeb+freebsd@zabbadoz.net>

- wrap mappedaddr block by #ifdef INET for IPv6-only kernel in future.
- rejects IPv6 packet toward IPv4-mapped address if its source address
is not an IPv4-mapped IPv6 address, since the converted IPv4 packets
would have an unexpected IPv4 source address.
- when V6ONLY socket option is set, discard packets destined to a
v4/ipv4 mapped ipv6 address.
- have PULLDOWN_TEST codepath.
- get rid of in6_mcmatch().

Obtained from: KAME

supported IPV6_RECVPATHMTU socket option.

Obtained from: KAME

pass pcb rather than so. it is expected that per socket policy
works again.

Split the "inp" mutex class into separate classes for each of divert,
raw, tcp, udp, raw6, and udp6 sockets to avoid spurious witness
complaints.

Reviewed by: rwatson
Approved by: re (rwatson)

Introduce a MAC label reference in 'struct inpcb', which caches
the MAC label referenced from 'struct socket' in the IPv4 and
IPv6-based protocols. This permits MAC labels to be checked during
network delivery operations without dereferencing inp->inp_socket
to get to so->so_label, which will eventually avoid our having to
grab the socket lock during delivery at the network layer.

This change introduces 'struct inpcb' as a labeled object to the
MAC Framework, along with the normal circus of entry points:
initialization, creation from socket, destruction, as well as a
delivery access control check.

For most policies, the inpcb label will simply be a cache of the
socket label, so a new protocol switch method is introduced,
pr_sosetlabel() to notify protocols that the socket layer label
has been updated so that the cache can be updated while holding
appropriate locks. Most protocols implement this using
pru_sosetlabel_null(), but IPv4/IPv6 protocols using inpcbs use
the the worker function in_pcbsosetlabel(), which calls into the
MAC Framework to perform a cache update.

Biba, LOMAC, and MLS implement these entry points, as do the stub
policy, and test policy.

Reviewed by: sam, bms
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories

- cleanup SP refcnt issue.
- share policy-on-socket for listening socket.
- don't copy policy-on-socket at all. secpolicy no longer contain
spidx, which saves a lot of memory.
- deep-copy pcb policy if it is an ipsec policy. assign ID field to
all SPD entries. make it possible for racoon to grab SPD entry on
pcb.
- fixed the order of searching SA table for packets.
- fixed to get a security association header. a mode is always needed
to compare them.
- fixed that the incorrect time was set to
sadb_comb_{hard|soft}_usetime.
- disallow port spec for tunnel mode policy (as we don't reassemble).
- an user can define a policy-id.
- clear enc/auth key before freeing.
- fixed that the kernel crashed when key_spdacquire() was called
because key_spdacquire() had been implemented imcopletely.
- preparation for 64bit sequence number.
- maintain ordered list of SA, based on SA id.
- cleanup secasvar management; refcnt is key.c responsibility;
alloc/free is keydb.c responsibility.
- cleanup, avoid double-loop.
- use hash for spi-based lookup.
- mark persistent SP "persistent".
XXX in theory refcnt should do the right thing, however, we have
"spdflush" which would touch all SPs. another solution would be to
de-register persistent SPs from sptree.
- u_short -> u_int16_t
- reduce kernel stack usage by auto variable secasindex.
- clarify function name confusion. ipsec_*_policy ->
ipsec_*_pcbpolicy.
- avoid variable name confusion.
(struct inpcbpolicy *)pcb_sp, spp (struct secpolicy **), sp (struct
secpolicy *)
- count number of ipsec encapsulations on ipsec4_output, so that we
can tell ip_output() how to handle the packet further.
- When the value of the ul_proto is ICMP or ICMPV6, the port field in
"src" of the spidx specifies ICMP type, and the port field in "dst"
of the spidx specifies ICMP code.
- avoid from applying IPsec transport mode to the packets when the
kernel forwards the packets.

Tested by: nork
Obtained from: KAME

rename variables.

Obtained from: KAME

ip6_savecontrol() argument is redundant

- typo in comment
- style
- ANSIfy
(there is no functional change.)

Obtained from: KAME

return(code) -> return (code)
(reduce diffs against KAME)

Add a TCP TIMEWAIT state which uses less space than a fullblown TCP
control block. Allow the socket and tcpcb structures to be freed
earlier than inpcb. Update code to understand an inp w/o a socket.

Reviewed by: hsu, silby, jayanth
Sponsored by: DARPA, NAI Labs

Tie new "Fast IPsec" code into the build. This involves the usual
configuration stuff as well as conditional code in the IPv4 and IPv6
areas. Everything is conditional on FAST_IPSEC which is mutually
exclusive with IPSEC (KAME IPsec implmentation).

As noted previously, don't use FAST_IPSEC with INET6 at the moment.

Reviewed by: KAME, rwatson
Approved by: silence
Supported by: Vernier Networks

Enclose IPv6 addresses in brackets when they are displayed printable with a
TCP/UDP port seperated by a colon. This is for the log_in_vain facility.

Pointed out by: Edward J. M. Brocklesby
Reviewed by: ume
MFC after: 2 weeks

cleanup usage of ip6_mapped_addr_on and ip6_v6only. now,
ip6_mapped_addr_on is unified into ip6_v6only.

MFC after: 1 week

- fixed a bug that we can't send a packet to ipv4mapped ipv6 address
using a udp6 socket without bind(2)ing.
- fbsd4/430 reported from the FreeBSD team.
- this fix is different from the fix reported in the above PR. i think
this better, but we need some test.

Obtained from: KAME
MFC after: 3 weeks

Notify functions can destroy the pcb, so they have to return an
indication of whether this happenned so the calling function
knows whether or not to unlock the pcb.

Submitted by: Jennifer Yang (yangjihui@yahoo.com)
Bug reported by: Sid Carter (sidcarter@symonds.net)

Back out my lats commit of locking down a socket, it conflicts with hsu's work.

Requested by: hsu

Lock down a socket, milestone 1.

o Add a mutex (sb_mtx) to struct sockbuf. This protects the data in a
socket buffer. The mutex in the receive buffer also protects the data
in struct socket.

o Determine the lock strategy for each members in struct socket.

o Lock down the following members:

- so_count
- so_options
- so_linger
- so_state

o Remove *_locked() socket APIs. Make the following socket APIs
touching the members above now require a locked socket:

- sodisconnect()
- soisconnected()
- soisconnecting()
- soisdisconnected()
- soisdisconnecting()
- sofree()
- soref()
- sorele()
- sorwakeup()
- sotryfree()
- sowakeup()
- sowwakeup()

Reviewed by: alfred

Revert the change of #includes in sys/filedesc.h and sys/socketvar.h.

Requested by: bde

Since locking sigio_lock is usually followed by calling pgsigio(),
move the declaration of sigio_lock and the definitions of SIGIO_*() to
sys/signalvar.h.

While I am here, sort include files alphabetically, where possible.

just merged cosmetic changes from KAME to ease sync between KAME and FreeBSD.
(based on freebsd4-snap-20020128)

Reviewed by: ume
MFC after: 1 week

Change the suser() API to take advantage of td_ucred as well as do a
general cleanup of the API. The entire API now consists of two functions
similar to the pre-KSE API. The suser() function takes a thread pointer
as its only argument. The td_ucred member of this thread must be valid
so the only valid thread pointers are curthread and a few kernel threads
such as thread0. The suser_cred() function takes a pointer to a struct
ucred as its first argument and an integer flag as its second argument.
The flag is currently only used for the PRISON_ROOT flag.

Discussed on: smp@

Introduce a version field to `struct xucred' in place of one of the
spares (the size of the field was changed from u_short to u_int to
reflect what it really ends up being). Accordingly, change users of
xucred to set and check this field as appropriate. In the kernel,
this is being done inside the new cru2x() routine which takes a
`struct ucred' and fills out a `struct xucred' according to the
former. This also has the pleasant sideaffect of removing some
duplicate code.

Reviewed by: rwatson

Fix warnings caused by discarding const.

Hairy Eyeball At: peter

Corrected an argument to in6_pcbnotify().

Obtained from: KAME
MFC after: 1 week

o Replace reference to 'struct proc' with 'struct thread' in 'struct
sysctl_req', which describes in-progress sysctl requests. This permits
sysctl handlers to have access to the current thread, permitting work
on implementing td->td_ucred, migration of suser() to using struct
thread to derive the appropriate ucred, and allowing struct thread to be
passed down to other code, such as network code where td is not currently
available (and curproc is used).

o Note: netncp and netsmb are not updated to reflect this change, as they
are not currently KSE-adapted.

Reviewed by: julian
Obtained from: TrustedBSD Project

Make faith loadable, unloadable, and clonable.

KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after: ha ha ha ha

move ipsec security policy allocation into in_pcballoc, before
making pcbs available to the outside world. otherwise, we will see
inpcb without ipsec security policy attached (-> panic() in ipsec.c).

Obtained from: KAME
MFC after: 3 days

Sync with recent KAME.
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.

TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.

Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks

Switch to using a struct xucred instead of a struct xucred when not
actually in the kernel. This structure is a different size than
what is currently in -CURRENT, but should hopefully be the last time
any application breakage is caused there. As soon as any major
inconveniences are removed, the definition of the in-kernel struct
ucred should be conditionalized upon defined(_KERNEL).

This also changes struct export_args to remove dependency on the
constantly-changing struct ucred, as well as limiting the bounds
of the size fields to the correct size. This means: a) mountd and
friends won't break all the time, b) mountd and friends won't crash
the kernel all the time if they don't know what they're doing wrt
actual struct export_args layout.

Reviewed by: bde

be careful on mbuf overrun on ctlinput.
short icmp6 packet may be able to panic the kernel.
sync with kame.

sync with kame tree as of july00. tons of bug fixes/improvements.

API changes:
- additional IPv6 ioctls
- IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8).
(also syntax change)

Previous commit changing SYSCTL_HANDLER_ARGS violated KNF.

Pointed out by: bde

Style police catches up with rev 1.26 of src/sys/sys/sysctl.h:

Sanitize SYSCTL_HANDLER_ARGS so that simplistic tools can grog our
sources:

-sysctl_vm_zone SYSCTL_HANDLER_ARGS
+sysctl_vm_zone (SYSCTL_HANDLER_ARGS)

correct bad TTL with packets generated by v4 mapped udp. from kame

Remove ~25 unneeded #include <sys/conf.h>
Remove ~60 unneeded #include <sys/malloc.h>

Support per socket based IPv4 mapped IPv6 addr enable/disable control.

Submitted by: ume

Merge a bug fix from freebsd-current; check m != NULL before touching it,
at udp6_ctlinput().
There should be kernel panic at PCCARD suspend etc, before this bug fix.

Submitted by: Hajimu UMEMOTO <ume@mahoroba.org>

tcp updates to support IPv6.
also a small patch to sys/nfs/nfs_socket.c, as max_hdr size change.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project

IPSEC support in the kernel.
pr_input() routines prototype is also changed to support IPSEC and IPV6
chained protocol headers.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project

Change incorrect NULLs to 0s

M_PREPEND-related cleanups (unregisterifying struct mbuf *s).

udp IPv6 support, IPv6/IPv4 tunneling support in kernel,
packet divert at kernel for IPv6/IPv4 translater daemon

This includes queue related patch submitted by jburkhol@home.com.

Submitted by: queue related patch from jburkhol@home.com
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project