- Copy stable/10 (r259064) to releng/10.0 as part of the
10.0-RELEASE cycle.
- Update __FreeBSD_version [1]
- Set branch name to -RC1

[1] 10.0-CURRENT __FreeBSD_version value ended at '55', so
start releng/10.0 at '100' so the branch is started with
a value ending in zero.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

- There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
(bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
since r52045) but even recently added device drivers do this unnecessarily.
Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
Discussed with: jhb
- Also while at it, use __FBSDID.

Add location and pnpinfo strings for puc device ports. The location is
announced during boot and contains the port number. The pnpinfo string
lists the port type (PUC_TYPE_* constants).

Tested by: Boris Samorodov bsam ipt ru
MFC after: 1 week

remove now-redunant cardbus attachment lines.

Rewrite puc_pci_match() to handle non-trivial cases correctly.

MFC after: 1 week

Fix building with GCC 4.2: ensure types are defined before refering to them.

Rewrite of puc(4). Significant changes are:
o Properly use rman(9) to manage resources. This eliminates the
need to puc-specific hacks to rman. It also allows devinfo(8)
to be used to find out the specific assignment of resources to
serial/parallel ports.
o Compress the PCI device "database" by optimizing for the common
case and to use a procedural interface to handle the exceptions.
The procedural interface also generalizes the need to setup the
hardware (program chipsets, program clock frequencies).
o Eliminate the need for PUC_FASTINTR. Serdev devices are fast by
default and non-serdev devices are handled by the bus.
o Use the serdev I/F to collect interrupt status and to handle
interrupts across ports in priority order.
o Sync the PCI device configuration to include devices found in
NetBSD and not yet merged to FreeBSD.
o Add support for Quatech 2, 4 and 8 port UARTs.
o Add support for a couple dozen Timedia serial cards as found
in Linux.

Use BUS_PROBE_DEFAULT for pci probe return value

Remove duplicate FBSDID.

Use the standard FreeBSD license

Start each of the license/copyright comments with /*-, minor shuffle of lines

Add missing <sys/module.h> includes

Sometimes cardbus attachments don't attach, so while we track down
this problem put these lines back in. While they should be
unnecessary, they appear to be sometimes necessary.

Reviewed in concept: dfr
Approved by: re (scottl@)

Remove explicit cardbus attachments from drivers where this is identical
to the pci attachment. Cardbus is a derived class of pci so all pci
drivers are automatically available for matching against cardbus devices.

Reviewed by: imp

Enhance puc(4) to support uart(4). This includes:
o Introduce PUC_PORT_TYPE_UART so that we can attach to uart(4),
o Introduce port sub-types (eg PUC_PORT_UART_NS8250, PUC_PORT_UART_Z8530)
to handle different hardware and determine resource sizes.
o Introduce two new IVARs: PUC_IVAR_SUBTYPE and PUC_IVAR_REGSHFT. Both
are used by uart(4) to get sufficient information to talk to the HW.
o Introduce PUC_FLAGS_ALTRES to tell puc(4) to try memory mapped I/O
if I/O port space cannot be allocated, or vice versa.
o Have ports of type PUC_PORT_TYPE_COM attach to uart(1) if attaching
to sio(4) fails (due to not having the sio driver).
o Put struct puc_device_description in struct puc_softc instead of
having a pointer to a device description in the softc. This allows
us to create device descriptions on the fly without having to use
malloc() or otherwise have them staticly defined.
o Move puc_find_description() from puc.c to puc_pci.c as it's specific
to PCI.
o Add EBUS and SBUS frontends for use on sparc64. Note that the P in
puc stands for PCI, so we kinda mess things up here. It's too soon
to worry about it though. We'll know what to do about it in time.

NOTE: This commit changes the behaviour of puc(4) to not quieten the
device probe and attach for child devices. The uart(4) driver provides
additional device description that is valuable to have.

- Rename PCIx_HEADERTYPE* to PCIx_HDRTYPE* so the constants aren't so long.
- Add a new PCIM_HDRTYPE constant for the field in PCIR_HDRTYPE that holds
the header type.
- Replace several magic numbers with appropriate constants for the header
type register and a couple of PCI_FUNCMAX.
- Merge to amd64 the fix to the i386 bridge code to skip devices with
unknown header types.

Requested by: imp (1, 2)

Use __FBSDID().
Also some minor style cleanups.

Stylistic fixes for the inclusion of the opt_puc.h header, so it comes from the
right places, and so it's sorted consistently with how all the other N-hundreds
of files ding this do it.

Submitted by: Hiten Pandya <hiten@uk.FreeBSD.org>

More cleaning up and unhacking:

Don't expect all RIDs to be PCI rids. The previous code made at
least 1 mistake, even for PCI.

Give the card definitions a chance to specify a init function.
Use this instead of the gross superio hack.
Move the win877 init function to puc_pci.c where it belongs.

RIDs can actually be zero, don't set badmuxed if so.

Set a less incorrect end for the construct SYS_RES_IOPORT entries,
I guess both sio and lpt happen to use 8 IO ports, but that shouldn't
really be hardcoded this way.

Fixup puc_pccard.c to match.

We're getting closer.

Don't enable PUC_DEBUG by accident

Split the puc driver in pci specific and generic parts.
Add a pccard frontend for it as well.

The PCcard stuff does not work yet because there is still some PCImagic
left in puc.c